Problem with Windows XP after a driver instalation

Hi. I have a Lenovo SL400 with Windows XP. So, today I installed a few drivers from the Lenovo website because the volume and Lenovo Care keys and the bluetooth were not working since I changed to XP. After the installing process, I restarted my laptop and now just when its about to open the window to entet my password I get this blue screen for around 1 second and then it restarts itself, to do the same over and over again. The blue screen shows a four line message saying there is an error and some numbers. I have tried every option in the F8 menu and got nothing. Help me, please, I'm desperate :s

my friend isten carefully:
i have a g500,in which i tested a xp clean install(both x64 & x86 versions of xp*)(service pack 3 for the x86 version*).
all the features work EXCEPT:when i install the wireless/bluetooth i start to receive the bsod(blue screen of death)
i assume there is a VERY big issue(incompatibility) between the "high speed"(4.0 HS)adapter which is plugged in in this machine(and i also assume you have the same problem on your model).
thing is........this adapter cannot work on windows xp,because:the intel chipset setup&the intel management engine interface setup have both tell your machine to work with specific "rules"(after the installation of these mentioned packages).
that means,your system works fine,untill you try to install the bluetooth/wireless driver!
after this installation,you receive this blue screen because the driver might be supossed/planned to work under windows xp,but the wifi/bluetooth adapter might NOT be working after the specific intel setup!..and that is a huge bug (in my opinion always).
there is a workarround i think,but it demands that you actually must DOWNGRADE the motherboard setup(intel chipset drivers)or transform it to sth else,rather than what it is.
the above has a result that the machine "sees" the usb ports as "generic"(...if i remember well)and then you can install the wifi/bluetooth set up normally.
the whole problem stands on what i just mentioned:the wifi adapter is plugged under "internal usb" WHICH HAS TO WORK AS 3.0, BUT usb 3.0 IS NOT supported under win xp(or vista)!!!!!..so that's why the driver you(...and me)installed is the CORRECT ONE(according to the manufacturer)but THE MOTHERBOARD ON WHICH it is installed is NOT the suitable one(after the chipset setup installed of course!)
Hope what i wrote helps everyone(plus Lenovo .....TO FIX IT!)

Similar Messages

Problems with Bluetooth stack after bootcamp driver installation.

I have been running Windows Server 2008 in bootcamp without drivers from the Mac OSX installation cd for a few months with everything except soundcard and function keys working - but since I have found that I need sound and the function keys, I decided to install the Bootcamp drivers and all other drivers that my system would recognize and use.
At this point I should say that ever since I installed Windows Sever 2008, I've been using a mighty mouse wireless on both osx and server 2008, and both have been working perfectly both running natively (in bootcamp or osx) or in virtualization (with vmware fusion on osx).
After completing said install, I rebooted and found to my horror that my mighty mouse wireless had stopped working. I went into the control panel of server 2008 and found the bluetooth.cpl and proceeded to correctly find the mouse identified as it was setup in osx when I first set it up there. I then tried connecting to it in multiple ways, both by supplying no passphrase, letting it decide it's passphrase or entering one (0000 as some documentations have pointed out). None of these solutions worked, so now I'm stuck with a mouse that works in osx and vmware fusion, and that used to work in server 2008 before I installed Apples provided drivers for their hardware.
So my question is - have any of you run into this problem on Vista (I'm figuring Vista is closer to server 2008 than XP is, because they share at least some of the same core as far as I know).
Another thing I've noticed is that I can't make Apple Software Update update Bootcamp to 2.1 - it simply doesn't acknowledge that Bootcamp is installed on Windows, even if I try and force the registering of it with the encluded .exe file in the zip when I download it manually)
I would really appreciate any sort of help on this problem, as I'm fresh out of ideas as to what I can do about it. The only thing I can think of is that Apple's drivers somehow broke the configuration that was working (in resetting it after reboot), but then the question is: How to make it work again.
Again: please help, any help is much appreciated.

Today I installed Vista Ultimate on my new (early 2008) MBP, to find that it killed my Bluetooth on Vista, and also on my OS X partition. Both OS's claim that there is no Bluetooth Hardware attached. It worked after I installed the Drivers, but stopped when I tried to install an Apple BT Keyboard.
Any assistance would be greatly appreciated. I'll begin searching for an answer.
I did do a Super Duper Clone, before I installed Vista on the Boot Camp partition, but I'm fearful that it may be a hardware issue.
Cheers Teky
Message was edited by: TekyTek

Problem with window manager after re-installing Compiz

When i start my arch i get no window borders. I also cant get enything minimized, when i try to do so windows are lost.
i use this command when i start:
metacity --replace
which allowes me to have window borders but still i cant minimize.
All these happened after trying to uninstall Compiz and trying to install compiz-git.
Please excuse me for not fully describing my problem, i can give u more details if needed.
Thank you for your time

One for the Developers of Keyword Manager, I would have thought.
Regards
TD

Problem with Windows 8.1 (64 bit) install

I purchased PS 5.0 many years ago and purchased the upgrade to PS 7.0 a couple or so years ago. I can't seem to install it on my new (Lenovo) computer that runs the Windows 8.1 (64 bit) OS. Please Help.

Jeff:
Thanks for the reply. Yes, PS is my shortcut for PhotoShop. I purchased
PS 5.0 many years ago and then upgraded it to PS 7.0 just a couple or so
years ago. PS 7.0 just dies when I try to install it on my new Windows 8.1
(64 bit) computer. I'm assuming that's because it can't find any original
on this new computer. So, I tried to install my original PS 5.0 and I got
a big dialog box stating "This app can't run on this PC. Contact your
software publisher to obtain a version that is compatible with your PC."
Any help would be appreciated.
Tom Whitlow

[Help: Urgent] problems with accessing /console after apparent successful install of Portal server SP3.0sp3a

Hi,
HW: Sun Solaris 2.8
I would really appreciate it you can cc: me if you can shed any light
as
to whats going wrong, and what I should do to fix the following
problem.
Portal server doesn't allow one to access /console (or /login) -
0 length document is returned.
We find the following in the enterprise server error log, when we
attempt
to access portal console (URI: http://....:8080/console)
1) Installed SP3.0sp3a as Open Portal, i.e without the gateway and
without
SSL enabled.
2) Our Unix users are served using YP
***From the server access logs : ***
- - [16/Nov/2001:15:12:40 -0800] "GET /login HTTP/1.0" 503 0
***From the server error logs : ***
[16/Nov/2001:14:11:27] info ( 4639): successful server startup
[16/Nov/2001:14:11:27] info ( 4639): iPlanet-WebServer-Enterprise/4.1SP7
BB1-04/05
/2001 18:30
[16/Nov/2001:14:11:28] info ( 4639): Loading Simple Session Manager by
default. Sp
ecify MMapSessionManager in servlets.properties to load persistent
session manager
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Default
values for maxi
mum number of sessions is 1000 with a time out value of 1800 seconds
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Maximum
number of sessi
ons (1000) with a time out value of (1800) seconds
[16/Nov/2001:14:12:40] info ( 4639): Internal Info: loading servlet
login
[16/Nov/2001:14:12:41] info ( 4639): Internal Info: loading servlet
pllservice
[16/Nov/2001:14:12:41] info ( 4639): pllservice: init
[16/Nov/2001:14:12:42] failure ( 4639): Internal error: exception thrown
from the
servlet service function (uri=/login): java.lang.NullPointerException,
stack: java
..lang.NullPointerException
at
com.iplanet.portalserver.auth.service.AuthD.printProfileAttrs(Compiled
Code)
at
com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:160)
at
com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled C
ode)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.j
ava:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at
com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunne
r.java:507)
, root cause:
Many thanks for your responses on this.
Tarang Kumar Patel. WWW home:http://ic-www.arc.nasa.gov/ic/
NASA Ames Research Center, MS 269-2, Moffett Field, CA 94035-1000
Email: [email protected], Tel:(650) 604-4721 fax: (650) 604
3594
Stated views are my own IDEA, as I'm another I.D.E.A man "I Didn't
Explain All"

Just one more thing:
I made the following setting in platform.conf
ips.debug=on
Now, the trace I see on the STDOUT/STDERR stream reveals :
Received RequestSet XML : <?xml version="1.0" standalone="yes"?>
<RequestSet vers="1.0" svcid="profile" reqid="2">
<Request sid="qxcuekwwdrcfwubmmwuip82764q94o37r67n@[email protected]@8080@z
repvc"><![CDATA[<ProfileService ver="1.0" reqid="0"><GetProfile searchFlag="false"
admin="false"><Profile profileName="mercip/authentication" profileType="9"><Priv p
rivName="iwtSession-addSessionListenerOnAllSessions"/></Profile></GetProfile></Prof
ileService>]]></Request>
</RequestSet>
---->NEED TO FILL APPSHASH -----
getProfile.walktree
321^iwtSession-addSessionListenerOnAllSessions-pv
com.iplanet.portalserver.profile.service.ProfileServiceException: 321^iwtSession-ad
dSessionListenerOnAllSessions-pv
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Exception.java:42)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(
ProfileServiceException.java:47)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compile
d Code)
at com.iplanet.portalserver.profile.service.ProfileService.getProfile(Compi
led Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRe
quest(ProfileService.java:134)
at com.iplanet.portalserver.profile.service.ProfileService.processRequest(P
rofileService.java:123)
at com.iplanet.portalserver.profile.service.ProfileService.process(Compiled
Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(PLLR
equestServlet.java:139)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Co
de)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileResponse.toXMLString:method id is 0
Sent ResponseSet XML : <?xml version="1.0" standalone="yes"?>
<ResponseSet vers="1.0" svcid="profile" reqid="2">
<Response><![CDATA[<ProfileService vers="1.0" reqid="0"><Exception>321^iwtSession-a
ddSessionListenerOnAllSessions-pv</Exception></ProfileService>]]></Response>
</ResponseSet>
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileUtils.getProfileResponse: Response content <ProfileService vers="1.0" reqid=
"0"><Exception>321^iwtSession-addSessionListenerOnAllSessions-pv</Exception></Profi
leService>
Profile Error:
Invalid attribute or privilege name
com.iplanet.portalserver.session.SessionException: Invalid attribute or privilege n
ame
at java.lang.Throwable.fillInStackTrace(Native Method)
at com.iplanet.portalserver.session.SessionException.<init>(SessionExceptio
n.java:30)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:642)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:502)
at com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:112)
at com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Co
de)
at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.ja
va:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
Authd Profile Attributes
cookieDomains
cookieName->iPlanetPortalServer
authHost:authPort->........:8080
authProto->http
authHostIP->.....
authHostURL->http://.......:8080/login/default
Lets hope this helps

Problems with drwin.exe after upgrading driv

After doing a online update for my audigy 4 drivers, i now get a message on shutdown saying drwin.exe has failed to inialtise and is unable to log off station. I then have a devil of time trying to get the pc to shutdown at all. Any ideas how to fix this would be greatly appreciated.

Just a email from support telling me do to a clean install, link below:http://ask.europe.creative.com/SRVS/...ve.com,case=72?also found a small hotfix for it. drwin.exe is the microsoft error reporting tool. this seems to be crashing as its trying to report an error with sound card drivers. i've managed to get it to stop crashing for the time being by doing the following:?open control panel, click on system and go to advanced tab. at bottom of this you will see a button that says error reporting, click on it. another wee box will come up, uncheck the one that says programs, (under the error reporting bullet button). not really a fix, more of a workaround. hope it hel
ps.
am gonna also try at some point to uninstall and then reinstall drivers from the disc i have and see if this solves it too. I dont install any other software other than drivers and audio console.Message Edited by gunhed27 on 2-29-20060:58 AM

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

MOVED: Driver problems with Windows Professional XP 64bit Edition

This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit Edition

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

Bootcamp 'Glowing' windows logo freeze after gfx driver install

Bootcamp 'Glowing' windows logo freeze after gfx driver install
Last week suddenly, after having changed or installed nothing, trying to boot into windows resulted in a frozen glowy window logo 'Starting Windows', which resulted in having to format the windows partition.
Since then I've found out that I can do everything except install gfx drivers.
I've installed firefox, all bootcamp drivers except gfx, swtor (doesn't run of course, but installs fine), quicktime, rebooting is fine after all this...
But as soon as I install any kind of graphics driver and reboot, it freezes at the glowy window logo.
I have tried;
The bootcamp included gfx driver
Windows Update included gfx driver
Official nVidia latest beta driver
Official nVidia latest whql driver
Official nVidia oldest whql driver
nVidia Cuda driver, both versions
All give the same result
I have formatted the entire harddrive and written zeros and made the windows partition in a physically different location to make sure it's not a harddrive issue, no luck.
I have tried both Windows 7 x86 and x64 with matching drivers, same results.
Tried booting with no devices attached, no luck.
This all seems to me like a bust gfx card, were it not that under Lion everything works fine, even gaming (WoW).
Techtool Pro's test machine shows no errors.
My machine is a;
iMac
24-inch, Early 2008
Processor 3,06 GHz Intel Core 2 Duo
Geheugen 4 GB 800 MHz DDR2 SDRAM
Videokaart NVIDIA GeForce 8800 GS 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Hardwareoverzicht:
Modelnaam: iMac
Modelaanduiding: iMac8,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 3,06 GHz
Aantal processors: 1
Totale aantal cores: 2
L2-cache: 6 MB
Geheugen: 4 GB
Bussnelheid: 1,07 GHz
Opstart-ROM-versie: IM81.00C1.B00
SMC-versie (systeem): 1.30f1

I am running Lion on a Mac Mini Server wherein I placed a Bootcamp partition and installed Windows 7 Ultimate. I've been testing Windows Media Center using a CableCard Tuner installed in a SiliconDust HomeRun box.
All was well until I received a Windows notification of an NVIDIA driver update. After the update, I now freeze at the same point that you do in the Windows startup splash screen.
I rolled back the driver using the Windows control panel associated with the device. Still freezes.
Windows repair does not have a fix. I can't get windows to start in "safe mode" so I can remove the additional apps that NVIDIA installed during the update.
I'm certain the freeze is associated with the NVIDIA driver.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

Hi!
I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

Hi:
See if this driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

Problem with Windows XP after a driver instalation

Similar Messages

Maybe you are looking for