Problem with Wireless settings in WRT 300N (V2)

Greetings,
I've just managed to reset the WRT 300N to default settings and have setup the internet conncection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wirelessly to the network.
The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.
I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
It's something that I think muxt be to do with the security settings.
Can anyone offer any suggestions ??
THanks
Solved!
Go to Solution.

Try the following steps:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Then Click on wireless Tab select, Wireless Network mode “Mixed”, Radio Band to 20 MHz only and Standard Channel to 1, 3, 6, 9, and 11. Click Save Settings.
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 75
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2307
Then check the status..
Here is the link for connecting the wireless network: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32036bdcd9dd44ec94f94fc5f6da666f_Connecting_wirele...

Similar Messages

I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Problems with wireless internet on Imac

I have an IMAC since just over a year (MAC OS X vs. 10.6.6), and I have had over the last couple of months lots of problems with wireless connection.
Sometimes it connects without problem, but mostly I have to follow a 'Diagnostic Info' process: I select Airport, then select the wireless network, then have to restart, and then all lights turn green. I can connect then and only after a minute the pages do not load anymore.
Can anyone give me some troubleshooting tips ?

You could also have look at this thread: http://discussions.apple.com/thread.jspa?threadID=2790214&tstart=0
which has a couple of links I posted that may help troubleshoot your problem.
Rick's suggestion at looking at changing channels seems to be a good starting point.

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Huge problems with wireless, would need some help

Sorry for the bad topic, and sorry for my english.
And now the problem.
I have just bought my first laptop, and got almost everything to play nice in arch, except the wireless.
My card is a Intel PRO/Wireless 3945ABG (iwl3945), and i have a Dlink 524 router (abg).
Using WAP, but can change this if its help.
Right now I'am using NetworkManager (0.6.5-3 from rep) and KNetworkManager (from AUR), and it works very very bad.
It can't connect at startup (or atleast it doesn't...), it takes several attempts to get a connection, it drops the connection and dont reconnect when it does, and so on. Its almost unusable and force me to use wired a connection just to be sure to be able to write this.
After what i read in different forums and mailinglists, there seems to be a lot of problems with wireless at the moment?
Anyone got this combination to work fine? Or are there any other way of configuration i should try? Suggestions?
Thanks in advance!

I've had a lot of problems with wireless networking for several weeks recently, ever since I upgraded vanilla kernel26 from v.2.6.22 to v.2.6.23 (see http://bbs.archlinux.org/viewtopic.php?id=40145). I'm using the Windows driver bcmwl5 for the Broadcom 4311 chipset via Ndiswrapper, and I'm using WPA-PSK (TKIP) encryption. I also use a D-Link DI-524 router. What finally cured the problem was to install the new wicd (v.1.3.1) network manager which is now in extra and to set up all networking interfaces in that GUI, abandoning using Arch network profiles and all the detailed setup in /etc/rc.conf.
My /etc/rc.conf now only contains (I'm only showing entries pertinent to networking)
MODULES=(ndiswrapper capability sg acpi-cpufreq cpufreq_ondemand cpufreq_performance cpufreq_powersave)
HOSTNAME="RFDellLT"
DAEMONS=(syslog-ng @nfslock @nfsd @netfs @crond !network hal cpufreq portmap wicd sshd cups alsa @openntpd privoxy)
i.e. no more INTERFACES, not even "lo", gateway, ROUTES, NET_Profiles. Everything is set up through wicd. You only need to put the wicd daemon in the DAEMONS array (after hal which also loads dbus), and the network daemon isn't needed anymore. Also you should uninstall any other networkmanager.
To put the wicd icon in the system tray, create a shell script (give it any name) in the .kde/Autostart/ directory in your home directory (if you use KDE, otherwise do the equivalent thing for any other DE/WM) that contains the command /usr/lib/wicd/tray.py.
You may want to try wicd, perhaps it'll fix your problem. It certainly has gotten good press in this forum.

When I updated to 10.4.10, had problems with wireless. Able to fix problem

I have a mac mini G4 since Sep 06. I had no problems with wireless until I updated to 10.4.10. My problem was I could only connect to the internet for about 10 minutes then it would not respond. I had to turn off airport then turn it back on then it would work for about 10 more minutes. I have AT&T DSL, speed stream 4100 modem, and D Link 524 router. I went to D Link web site and found out when I use encryption WEP,WPA,ETC. it has to be hexadecimal key with dollar sign ($) before the hex key (Apple computers only). Before the update, I only used password with no problems for about 9 months. Instead of using a password use 64 bit encryption its 10 hexadecimal key or 128 bit encryption its 26 hexadecimal key. Valid hexadecimal characters are 0-9 and A-F. Example of 64 bit key is $0123456789 instead of password. After I did this, I been on the internet for hours with no problems. I hope this info can help out.

Take a look through some of the other threads in this forum. Almost 100% of Safari 3 trouble after the OS X 10.4.11 update is caused by third party plugins, extensions, and input managers. Check in these folders and report back what you have in them.
/Library/Internet Plug-Ins (this is the Library folder in the top level of your hard drive)
~/Library/Internet Plug-Ins (this is the Library folder located in your Home (username) folder)
/Library/Input Managers
~/Library/Input Managers
Or if you know that you have installed some third party stuff along the way try un-installing them. Again, read some of the other threads here to see who the main suspects are. Once you know what is causing your trouble then, if you still want to use the third party plug-in, go to a site like [Version Tracker|www.versiontracker.com] and look for updated versions that work with Safari 3.

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with Wireless Router and Adapter

I tried posting this in the wireless adapter forum but nobody responded :-(
I'm using a WRT54G Router btw, and the firmware is v2.02.7, Feb. 27, 2004.
Hi everyone,
I have a Linksys Wireless G Router and several computers that I try to connect with. One of them is a computer running Windows XP and using a Linksys Wireless USB B Adapter (WUSB11). Another is a laptop running Mandriva Linux using a Linksys Instant Wireless Network PC Card (WPC11). Another one is running Windows Vista and using a Linksys Wireless N card. I also have a laptop running Windows XP using a Linksys Wireless-G Notebook Adapter (WPC54G). I also have another PC running Windows XP and uses a Linksys Wireless USB Adapter WUSB54G. Finally, I have two macintosh laptops running OSX and with airport devices installed.
Anyway, I have problems with my internet connection frequently being interrupted and even sometimes I won't have a connection at all for hours. This occurs with my Linux laptop, the PC with the Wireless B Adapter, and the laptop using the Wireless G Notebook Adapter. In addition to this, the macintosh laptops have internet even more infrequently. However, I seem to never have a problem with the Windows Vista desktop or the Windows XP desktop that has the Wireless G adapter. I try repairing the connection and often it does not work. I have also tried resetting the router and the cable modem. I'm not sure what else I can do. I even bought a Wireless N router and had little success with that. We even went as far as moving the wireless router upstairs into our living room, thinking that the signal was somehow suffering from interference or that distance was a factor. Anyway, sorry for the long post but I could really use some help!
Thanks.

Hi… logon to wireless N router’s setup page, open I.E. an in the address bar type 192.168.1.1 it would ask for username and password, put "admin" as a paassword (default password) without any username...linksys setup pops up, click on on wireless tab and and try changing radio band to wide 40MHz, wide channel to 9 and wireless standard channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
You can move the
com.apple.systempreferences.plist
file out of your Users/Library/Preferences folder to the desktop and reboot.
then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
(trash the file on the desktop if no ill issues occur later on)
or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509
I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

Problems with wireless usb adapter on MSI K8NGM-V

Hi!
I have a 3Com (3crusb20075) wireless usb adapter, and a MSI K8NGM-V Mainboard. Very often the usb disconnects from the network and i have to reinsert it to work again. A friend of mine have the exact same adapter and that one fails too. He uses mine without problems. I therefore belive that this is a problem with the usb ports on my mainboard. Have anyone heard of anything like this? I wanted to try to update my bios but i don't have a floppy so msi live update wouldnt let me, and i could find the bios files on the msi webpage so i cant burn them on a bootable cd. Help please
(I trying turning of power save mode on the usb adapter, without any luck. Tested it in linux. Same result)
Alex

The ability to access the network, but not the Internet, typically indicates that the computer is not able to either find or negotiate with the DNS servers. The proper DNS servers would be provided by your ISP using DHCP. In turn, the AirPort would use DHCP to provide these to both the wired & wireless computers connected to it.
Please try the following:
For each PC that is unable to access the Internet, temporarily include the following OpenDNS servers:
o Primary: 208.67.222.222
o Secondary: 208.67.220.220
You would enter these in the network TCP/IP settings for the respective PC's wireless network adapters. You may need to restart the computer in order for these DNS settings to "stick." After restarting, can you access the Internet with either or both of them?

DHCP problem with wireless clients

I've just set up this eqipment
Router/Firewall ASA 5505
Cisco WLC 2125 - Wlan controller
Switch Catalyst 2960
16 Ap's AIR-LAP1131AG-E-K9
Everything was working fine, but after a while there was a problem, spesially with cell phones with wlan and with some laptops. It seems a part of the users that has been connected, then loggout out and try to log in again. It seems that they then dont get dhcp. Can this be a problem with dhcp on the asa 5505? Or does anyone know of any settings that create problems of this type.
Trond

One layman's question:
For DHCP to work, you already permit 0.0.0.0 to ask 255.255.255.255 for its IP adress (i.e port 67 in one end, and 68 in the other).
When a client re-attaches ("logs in again") it will try to use its old adress (the one assigned by dhcp) and ask 255.255.255.255 to renew its adress.
Does your ACLs permit the IP range assigned via DHCP to access 255.255.255.255?
//Svein

Problems with wireless on my MacBook Pro

I've been having problems with my wireless network ever since I got my MacBook Pro. Sometimes the computer will stay connected to the router and I will get full signal but no data will be transferred — I can't even connect to the base station. I have tried turning off wireless and turning it back on, restarting the router, restarting the computer, etc etc and nothing really seems to work. It doesn't matter how many computers are on the network, either. It generally comes back randomly. The wireless works fine on my iBook G4 and my Dell, even at times when it doesn't work on my MBP, and I've never had a problem on the wireless network at work. I've seen various posts on the internet from people with similar problems and the only solution I've seen thus far is to get the wireless card in the computer replaced. I figured I'd ask if anybody here had any pearls of wisdom before I start ******** at Apple.
Thanks in advance for the help.

Hi Eaglecorpse, and welcome to the forums!
Check that the Card is seated or reseat it, check the Antenna connection.
Does his Router have the latest Firmware update?
AS a test next time you lose it try logging out & back in.

Problems with wireless mouse/keyboard after upgrade to snow leopard

Hi!
I am wondering if someone has some insight for me. I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years. I am now having problems with them irratically.
1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left. This does not happen in Word.
2. When in boxes with dropdown options, only occasionally does that happen. The dropdown either doesn't show, or it flashes quickly. Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
3. When I use my function key or mouse to display all windows, I can't choose the one I want. Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
5. For a while, my left mouse button wouldn't work. I reconfigured it, that seems to have done the trick.
6. Today, I can't open any of the menu items on Firefox. I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded. Thanks in advance for any help!
Donna

Update all your third party software or uninstall and reinstall 10.6 versions.
If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
http://roaringapps.com/apps:table
IMO save for a new 10.8 machine after this summer.
See #1-15 here, tune yourself up good.
 Step by Step to fix your Mac

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Problem with Wireless settings in WRT 300N (V2)

Similar Messages

Maybe you are looking for