Problem with WRT54G. All lights are Blinking

I do not know very much about technology and my router stopped working correctly. Now, the lights of Power, Internet, and the ones of the numbers 1 and 3 are blinking and the wireless connection does not work. Can anyone explain me what to do to solve this? I will be very grateful. Javier

hi... power cycle the n/w by unplugging power cable of modem and router, by unplugging power cable of modem and router...wait for couple of minutes, power up the modem first and once modem is rebooted power up the router, check whether lights stopped blinking or not, if lights are still blinking in that case you may need to reset the router back to factory default settings by pressing reset button on the back panel of the router but before you can reset the router let me know which internet connection are you using...so that i can tell you step by step configuration of the router...

Similar Messages

  • Ideapad u310 is not powering up - all lights are blinking

    Hi, i got a u310 that is not starting. Not only not booting, but not powering up at all. Plugged or unplugged the result is the same. All lights are blinking when i press the power or novo button(power button, power led, battery led and caps lock light, all white). They all blink together each 5 seconds and i hear a small click, like it's trying to power on or something. I can however press the power button again for a couple of seconds to turn it off.
    The battery led blinks only when it is unplugged. When it is plugged, the battery light stay on(solid, white).
    Anyone can help ? I've looked through the forum and could'nt find anything about this.
    Thanks in advance

    1. Remove any peripherals connected to the laptop.
    2. Remove any power strips and surge protectors.
    3. Remove the battery.
    4. Press and hold the power button for 5 seconds.
    5. Install the battery back and try to power ON.
    6. Connect the charger and try to power ON.

  • HP Officejet 7000 Wide Format Printer Series Error "ALL LIGHTS ARE BLINKING?"

    What are the causes of my printer HP Officejet 7000 Wide Format had this error "all lights blinking"? Which part of my printer have a problem? please help!! thankzzzz......

    Hello ryigo24,
    Welcome to the HP Forums.
    I see that you are having an issue with all the lights blinking on the printer.
    Please click on the following link that deals with Blinking Lights.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • WRH54G ALL LIGHTS ARE BLINKING WHAT SHOULD I DO?

    Hi,
    All the lights of my router are all blinking and the light of the ethernet on my modem is dead everytime i plug in my router but if i directly connect my dsl modem to my computer its working. any help on this thanks.

    Reset the router to defaults. If that doesn't work, try this procedure.

  • Deskjet 6127 -- All the lights are blinking; can't turn it off. Cartridges are stuck.

    Has anyone had this problem?  I have a Deskjet 6127, all the lights are blinking.  I can't turn it off.  If I unplug it and plug it back in,  (which is what it says to do on the troubleshooting site) the lights continue to blink.  The ink cartridges won't slide out.  Any suggestions on saving this printer from impending doom?

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I do have a Deskjet 5740 with all lights fast blinking. Unplug and plugin again does not help.

    I do have a Deskjet 5740 with all lights fast blinking. Unplug and plugin again does not help. That's already it. I would like to know if anybody can tell me if the means the machine is completely broken. Or if this is a seldom failure situation that can be solved somehow. Please don't overlook that it's  f a s t  blinking.

    I wanted this question  one more day on the first site.

  • WRT54GS all light up & power keep blinking

    Hi,
    my WRT54GS all light up & power keep blinking.
    Does anyone know what is wrong?
    Tks

    Your  router is fried. Try resetting it for 1 minute if its lit  up normally then it will work other wise you may have to replace it .

  • Network cable unplugged problem with WRT54G

    I just got a WRT54G wireless router recently, and experienced some problems with it. There are 5 notebooks in my network using wireless card and 2 PCs connect to the router through cables. The router is with ver 7.00.1 firmware.
    The router is working fine, the problem is sometimes it will show "Network cable unplugged" on my PC, and the whole network will be interruptted, the network will be resumed in few seconds and all machines need to get IP from the DHCP server again. It's quite annoying to be disconnected from middle of the work. I don't know what is the cause, seems like the router is re-reading it's configuration. I have tried to refresh the fireware but with no luck. Someone else got this problem before? anyone has a solution for this? Thanks a lot!
    Regards,
    Leo

    Try the following tips to resolve your problem:
    Disable the Ethernet network adapter if you are not using it. This applies, for example, when running a WiFi home network with computers that have built-in Ethernet adapters. To disable the adapter, double-click the small Network Cable Unplugged error window and choose the Disable option.
    Check both ends of the Ethernet cable connected to the adapter to ensure they are not loose.
    Replace the Ethernet cable with a different one to verify the cable is not damaged.
    Update the network adapter driver software from the manufacturer's Web site.
    Change the Link Speed and Duplex settings (using Device Manager) to use "100 Mbps Full Duplex" or "10 Mbps Full Duplex" instead of Auto Detect.
    Replace the Ethernet network adapter
    Good Luck,
    Ttech

  • 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

    I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
    502 - Web server received an invalid response while acting as a gateway or proxy server.
    There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
    ARR version installed is 3.0
    To throw more light on the configuration:
    Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
    All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
    Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
    Edge : Windows 2012 with Lync 2012 Std - 1 No 
    (192.168.11.101 DMZ) in workgroup
    ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
    Certificate : Internal Domain root CA for internal and External (Digicert).
    Internal Network : 192.168.10.x /24
    External Network (DMZ) : 192.168.11.x /24
    Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
    Edge has : sip.domain.com, webconf.domain.com, av.domain.com
    IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
    Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
    Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
    Internal AD Integrated DNS pointing Front-end
    Type of Record FQDN
    IP Description 
    A sip.domain.com
    192.168.10.100 Address internal Front End  or Director for internal network clients 
    A admin.domain.com
    192.168.10.100 URL Administration pool
    A DialIn.domain.com
    192.168.10.100 URL Access to Dial In 
    A meet.domain.com
    192.168.10.100 URL of Web services meeting
    A lyncdiscoverinternal.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to internal users
    A lyncdiscover.domain.com
    192.168.10.100 Register for Lync AutoDiscover service to external users  
    SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
    sip.domain.com Record pointer services to internal customer connections using TLS 
    External DNS pointing Edge & Proxy
    Type of Record FQDN
    IP Endpoint
    A sip.domain.com
    x.x.x.100 Edge
    A webconf.domain.com
    x.x.x.100 Edge
    A av.domain.com
    x.x.x.100 Edge
    SRV _sip._tls.domain.com
    sip.domain.com: 443 Edge
    SRV _sipfederationtls._tcp.domain.com
    sip.domain.com:5061 Edge
    A Meet.domain.com
    x.x.x.110 Reverse Proxy
    A Dialin.domain.com
    x.x.x.110 Reverse Proxy
    A lyncdiscover.domain.com
    x.x.x.110 Reverse Proxy
    A lyncweb.domain.com
    x.x.x.110 Reverse Proxy
    In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
    In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
    The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
    a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Certificate was installed properly.
    b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
    HTTP Response Headers:
    Content-Length: 1477
    Content-Type: text/html
    Date: Wed, 14 May 2014 10:03:40 GMT
    Server: Microsoft-IIS/8.0
    Elapsed Time: 1300 ms.
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • Pls help me.i have a problem with WRT54G wireless router.

    Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

    hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset".

    Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset".   For example, Tone is now showing Reset Tone - Resent Presence.
    In all panels the titles are showing "Reset".  Can you please explain and tell me how to fix?
    Thank you,
    Louise

    Sounds like you have an [Alt/Opt] key stuck down. Pressing this key changes to the Reset mode. If your key isn't stuck, did you recently custom map some keystrokes?

  • I am getting problem with internal table & work area declaration.

    I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
    TYPES : BEGIN OF ty_makt,
             matnr TYPE makt-matnr,
             spras TYPE makt-spras,
             maktx TYPE makt-maktx,
             maktg TYPE makt-maktg,
             celltab TYPE lvc_t_styl,
           END OF ty_makt.
    DATA : i_makt TYPE TABLE OF ty_makt.
    DATA : wa_makt TYPE ty_makt .
        But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
    i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

    Hi Nagasankar,
    TYPES : BEGIN OF TY_MATNR,
                  MATNR TYPE MAKT-MATNR,
                  SPRAS TYPE MAKT-SPRAS,
                  MAKTX TYPE MAKT-MAKTX,
                  MAKTX TYPE MAKT-MAKTG,
                  CELLTAB TYPE LVC_T_STYL,  " Its Working perfectly fine..
                 END OF TY_MAKT.
    DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
              WA_MAKT TYPE TY_MAKT.
    Its working perfectly fine. if still you are facing any issue post your complete code.
    Thanks,
    Sandeep

  • HT1766 The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?

    Try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maybe you are looking for