Problem with wrt54gl Cannot find server or DNS Error

Hello,
I am having problem with wrt54gl roouter. I have windows 2K professional that connected trough the wire. The browser (and other tools) is periodically loosing connection for around 30-60 seconds showing "Cannot find server or DNS Error". after refreshes it comes back. If I connect PC directly to internet without router I never have a problem. I have put statical resolution of dns servers(3 of them) and ip does not help. I switch between ports on pc and router site, change the cable, remove antivirus, put latest windows updates, use different browsers. Disable anable 2d network card (2 on mother board).
Any suggestions?
Thanks

Hi… Login to the setup page of the router and reduce the MTU to 1365. Upgrade or re-flash the firmware if needed.

Similar Messages

Intermittent "Cannot find server or dns error"

We are getting "Cannot find server or dns error" intermittently. It happens most frequently using internet explorer on https. Anyone else getting this or have any suggestions?
(I have logged as TAR 1525537.999)
null

After many, many hours or research and corresponding with other
Oracle resources, we resolved the issue. We still receive the
"Cannot find server or DNS error" but with much, much less
frequency.
Here are the complete details:
Environment:
Windows NT 4.0 SP 6
Oracle 9iAS 1.0.2.2
Oracle 9iAS Portal 3.0.9.8.0
Oracle 8i Database 8.1.7.0.0
Apache HTTP Server: 1.3.19 (win32)
mod_ssl: 2.8.1
OpenSSL: 0.9.5a
SSL port: 443
Problem:
We were running into the following error intermittently (but very
frequently) when accessing pages in the Oracle Portal application
with SSL enabled:
"Cannot find server or DNS error" at the bottom of a "Page cannot
be displayed" error page.
Resolution:
7 Applied patchset for Oracle8i 8.1.7.1.1 (to database client and
server)
7 Applied patchset for Oracle8i 8.1.7.1.5 (to database client and
server)
7 Applied patchset for Oracle Portal 3.0.9.8.1
7 Implemented solution for Oracle Bug No. 1822053 (HTTP 404 Doing
Portal Development) by changing (and un-commenting) the following
line in our Apache http.conf file:
From: #SetEnvIf User-Agent ".*MSIE.*" nokeepalive
ssl-unclean-shutdown
To: SetEnvIf User-Agent ".*MSIE.*" ssl-unclean-shutdown
7 Implemented solution for Oracle Bug No. 1821195 (When uploading
large file using modplsql & SSL error reading data from client)
by replacing the existing ApacheModuleSSL.dll file with the
patched file referenced in the bug details.
Note: Bug No. 1821195 is for Oracle9iAS 1.0.2.2. It references
Bug No. 1773627 for Oracle9iAS 1.0.2.1.
I feel the biggest help was finding out about Bug No.
1821195/1773627. We were provided the bug details by a local
Oracle technical consultant, Dave McMarlin, referred to us by the
Oracle Joint Staff Account Manager. That solved our problem with
receiving the noted error message when we tried to add items to
the content area. Applying the change to the http.conf file
identified by Bug No. 1822053 (removing the nokeepalive entry) in
combination with the Oracle8i and Oracle Portal upgrade seems to
have solved our problems with the other intermittent occurrences
of the noted error message.
According to the details for the ApacheModuleSSL.dll patch, there
was mention of a bug in the "select" function in Windows NT 4.0:
"When checking a socket, if data can be read without blocking,
select () returns yes, but when actually reading from the socket
with recv(), that function returns WSAEWOULDBLOCK, which says
that reading would block. It seems that this problem does not
occur in usual operation, but only in an SSL enabled Apache
(modssl or apache-ssl) with https. The code for WIN32, which
handles writing to a socket, already contains a workaround for
this. The code for reading from a socket did not have a
workaround."
Oracle Technical Assistance Report and Bug Information:
TAR Number: 1727314.999
BUG Reference: 1924408
Open Date: 07/31/2001
Abstract: Intermittent "Cannot find server or DNS error"

Forms/4GL Tutorial Returns Cannot find server or DNS Error

Hi:
I am trying to plow through this tutorial (10.1.3.1.0) and when I run the SRList.jpsx page I receive the error: Cannot find server or DNS Error. The URL produced by JDeveloper is:
http://192.168.99.36:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx.
Any suggestions?
I've culled the forums and the Web, and cannot find a match. The only nugget that I can add is that I'm using JDeveloper with the OA Framework extension. I have been successful creating pages with OA Framework and executing them. Is there some incompatibility with OA Framework and ADF?
Any help is greatly appreciated!

Mchrist,
You cannot use the OA Framework download to develop ADF apps.
I would create two batch/command files: in each one, set JDEV_USER_DIR and any other environment variables to point to a proper place and run the JDeveloper.
Just unzip JDev and OA Framework to separate locations and ensure that the user directory for each is in a separate location as well.
John

Database Control on Windows - Gives error Cannot Find Server or DNS Error

hi all,
After installing 10g on Windows, the necessary services for my new db are running, listener is up.
But when I try to bring up Database Control via http://pnclultraprd.corporate.mem.5500/em/console/logon/logon
I get "The page cannot be displayed. Cannot find server'
I've not had this before on new installations and I'm stuck.
Any tips? thanks, John

What is the status of the enterprise manager and agent,
emctl status dbconsole
emctl status agentHTH
Aman....

XE and "Cannot find server or DNS Error"

I read other articles and here is some data for your to go over.
=====================================================================
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 28 09:37:18 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
ERROR:
ORA-12631: Username retrieval failed
SQL>
==================
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 28-NOV-2006 08:19
:39
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 27-NOV-2006 16:14:11
Uptime 0 days 16 hr. 5 min. 27 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jantar)(PORT=15
21)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Also netstat does not show anything running on port 8080.
============================================
C:\Documents and Settings\N0139838>net start
These Windows 2000 services are started:
Alerter
COM+ Event System
Computer Browser
DHCP Client
Diskeeper
Distributed Link Tracking Client
Distributed Transaction Coordinator
DNS Client
EPAService
Event Log
Infrared Monitor
Logical Disk Manager
Machine Debug Manager
Messenger
Net Logon
Network Connections
OracleServiceXE
OracleXETNSListener
Plug and Play
Print Spooler
Protected Storage
Remote Access Connection Manager
Remote Procedure Call (RPC)
Remote Registry Service
Removable Storage
RunAs Service
SafeBoot Configuration Manager
SavRoam
Security Accounts Manager
Server
SMS Agent Host
SMS Remote Control Agent
SU Service
Symantec AntiVirus
Symantec AntiVirus Definition Watcher
Symantec Event Manager
Symantec Settings Manager
System Event Notification
Task Scheduler
TCP/IP NetBIOS Helper Service
Telephony
Windows Management Instrumentation
Windows Management Instrumentation Driver Extensions
Windows Time
WMDM PMSP Service
Workstation
The command completed successfully.
===========================================
Ping 127.0.0.1 or localhost is successfull.
===============================================
C:\Documents and Settings\N0139838>netstat -a
Nothing is running on port 8080.

Accoding to your listener status, it is actively listening on behalf of host 'jantar', but NOT listening on behalf of host 'locahost'.
What happens when you "ping jantar"?
Are you using DHCP?

DNS error Cannot find server

Hi,
I have built a basic form from the HR schema but when I click the 'Run Form' button, I get a 'Cannot find server or DNS Error'.
I am running 10gR2 and Forms [32 Bit] Version 10.1.2.0.2 (Production)
Thanks for your help.

I tried changing it to 1521 (the other listener port) with no success. When I changed it, I shutdown and restarted the OC4J.
http://Hagrid:8889/forms/frmservlet
C:\DevSuiteHome_1\j2ee\DevSuite\config\default-web-site.xml
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8889" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>

Email - cannot find server

For the last few days I am having a lot of problems with my Btinternet email - main one is that 7 out of 10 log ins I get a "Cannot find server" message. This morning I haven't been able to get in at all so far. (and yes, I am trying to log in via the link on the BT.com home page). I also get kicked out of email most times I click on Inbox and have to log back in again which is incredibly frustrating.
All this is since my laptop insisted on installing IE 11 but I don't know if there is a connection.
Any suggestions?

If I go to the 'My BT' website and click on the 'Email' logo at the top right of the screen I get the email logion screen.
After typing my login details my web browser tries to display page
http://uk.mg.bt.mail.yahoo.com/
but it fails and I get an error message saying "502 - Cannot find server or DNS Error".
Has anyone got any ideas how I can access my emails?

Error while synchronizing: Cannot find server

I have synchornization enabled both on my laptop and PC.
On laptop everything is fine, but any changes done on PC are not synchronizing with the "Cannot find server \ Wrong server" error.

Hi Selik,
Thank you for your question. Apologies for the late reply. I understand that you are receiving a synchronization error. May I confirm with you what service this is associated with?
If it is Firefox Sync please check the following:
# Do you have a firewall or antivirus that may be blocking https://accounts.firefox.com or specifically a name like * .services.mozilla.com
# Please enable logging and post any errors to share [http://pastebin.mozilla.org/]
How to turn on logging:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Thank you, we look forward to your reply!

"Cannot Find Server" Constant Error Message

I've been having this problem for quite some time. I will attempt to connect to a website only to wait forever and then get a "Cannot find server" error message. It's not just with one site, it happens with many.
It's also random. Sometimes everything connects fine and fast, and then inexplicably I get "Cant' find server" for sites like Facebook, Amazon, even Apple. It can start working again for a few minutes and then in an instant I'm getting error messages again.
However, my email always works fine.
And this is NOT a Safari problem. I also get the same trouble when I switch to Firefox or Explorer. My ISP says it's an Airport / Mac issue since it all works fine if I direct connect to the laptop and because my email is also working.
In addition, when I'm having this problem, my iPhone also cannot connect to the WWW but can get email.
I've tried powercycling the modem and the airport numerous times. It's really becoming a pain.
Any thoughts?

Me too I tried everything. I am an Apple fan with 2 computers,3 iPods. I have no idea what the problem is. I had to re-run the disk each time to find the internet. Finally tried a Linksys Grouter worked first time-laptop anywhere in the house strong signal. I have had similar problems with an Airport Express-never got it to work-so tried the Extreme. I returned it-I didn't want to but I just could not get it to work.

IE returns "Cannot find server" page during Servlet processing

I have 2 JSP applications, that require a certain amount of server processing before they complete. For small amounts of information, both of these applications work fine. However, with larger amounts of processing, IE seems to timeout or have a problem maintaining its session and returns with "Cannot find server" - the actual server processing continues meanwhile. This only happens with IE - other browsers maintain persistence. The "timeout" is always consistent - 5 minutes or so with one of the applications, 13 minutes with the other.
I can find no IE configuration that controls this. Since this doesn't happen with other browsers, is this an IE problem or a design issue with the application that doesn't manifest itself with other browsers ?

I wouldn't call it an IE problem. I would call it a design issue -- you should not take that long to return a response to the browser. Instead, you should return an immediate response that says something like "Your request has been received for processing", and have some other thread processing requests off-line. That other thread should send a notification (by e-mail?) to the user when the request has been processed, including a link where the data can be accessed.

Cannot find server error trying to download Migration Workbench

I've been trying to download OMWB for the last 4 days, from Oracle Migration Workbench Downloads / Release 9.2.0.1.2 for Microsoft Windows 98/NT/2000/XP page.
Keep getting 'Cannot find server' and 'Page cannot be displayed' errors in Internet Explorer.
Is this the correct URL:
http://download.oracle.com/otn/nt/omwb/92012/omwb_92012.exe
I downloaded and used the previous version of OMWB. Was very satisfied with it. Unfortunately, I had to rebuild my hard drive and lost OMWB.

I suggest that you retry, maybe there was some network glitches... If you follow the links from OTN you should be able to download no problems. Did you try the split downloads as an alternative?
Donal

HP Laserjet 2015 ..."Cannot Find Server"

I am having trouble in having my printer be a... "Network Printer"…. It is a HP Laserjet 2015 Printer.
I have a Mac OS version ~ 10.8.2 on my Apple computer.
If i have the printer connect directly to the computer via USB, (with no network) the printer works fine, but if I try to set up a network using an Ethernet Cable from the Printer Server to the Linksys E1200 Router, then I am unable to print. I get a page with ERROR messages.
I am using a HP JetDirect 175x External Print Server
When I run "Network Diagnostics"…. I get a….. "Cannot find Server"….. along with the message below….
Jim
Network Diagnostics
“Cannot Find Server”
This computer appears to have a working Internet connection, but cannot find “HP LaserJet 2015 (00110AB8E541)._printer._tcp.local.”. You may have typed the address incorrectly.
On the Sidebar titled, “Network Status”
Wi-Fi is............……........ Green
Wi-Fi Settings is...…..... Green
Network Settings is…... Green
ISP is.....................……... Green
Internet is...............…..... Green
Server (Failed) is...……... Red
This question was solved.
View Solution.

Thank you Garland_M for replying.
I have since removed the Printer Server, and found that I can simply put the USB Cable from the Printer to Computer 1, and Computer 2 will see it on the Network..... so I didn't even need that Printer Server in my setup as I had been informed.
Jim

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Network Printing... "Cannot Find Server"

I am having trouble in having my printer be a... "Network Printer"…. It is a HP Laserjet 2015 Printer.
I have a Mac OS version ~ 10.8.2.....
If i have the printer connect directly to the computer via USB, (with no network) the printer works fine, but if I try to set up a network using an Ethernet Cable from the printer to the Linksys E1200 Router, then I am unable to print. I get pages with Error messages.
When I run "Network Diagnostics"…. I get a….. "Cannot find Server"….. along with the message below….
Any suggestions?
Jim
Network Diagnostics
“Cannot Find Server”
This computer appears to have a working Internet connection, but cannot find “HP LaserJet 2015 (00110AB8E541)._printer._tcp.local.”. You may have typed the address incorrectly.
On the Sidebar titled, “Network Status”
Wi-Fi is............……........ Green
Wi-Fi Settings is...…..... Green
Network Settings is…... Green
ISP is.....................……... Green
Internet is...............…..... Green
Server (Failed) is...……... Red

rkaufmann87,
The printer that I have does not have network capabilities built in.... to have the network capabilities, HP says an additional piece of equipment must be used.... in my case, an HP JetDirect 175x Print Server... I found a used one on eBay that was inexpensive, so I purchased that, and have been trying to configure it to my computer and printer for about 5 hours now.... all I got were error pages.
I have an older iMac (2008), and I wanted the ability of the use of one printer for the new and old computers.
After I read your advice, I disconnected the HP JetDirect 175x Print Server entirely, and used just a USB cable from the printer to the computer.
The printer worked great from my new computer, but I still wanted the ability of using the printer with the older computer (Wi-Fi). I went into the Print & Scan of System Preferences, and for the heck of it, I clicked the "Printer Sharing" box.
I went to the old computer, and for the heck of it, I tried printing something.... LO & BEHOLD it worked.
I don't know how it works, because as I said before, the printer is not network-ready. When I bought the printer several years ago, there were two printers of that model on the shelf. One was a HP 2015, and the other was a HP 2015n.... (n meaning network). At the time I didn't think that I would ever need a network printer, which was more expensive, so I purchased the non-network one.
Now I am truly bewildered as to how I am able to print from both computers without the HP JetDirect 175x Print Server.
Do you, or anyone else have the answer to that????
Jim

Word cannot find server on some links

Two days ago Word 2008 suddenly stopped being able to open URLs for some sites (SoundCloud mainly). Howver the same links work when copied into Safari or a mail message. The error message is that 'Unable to open (url) cannot locate the internet server or proxy server'. SoundCloud support have spent some time trying to see if it is their end causing the problem, but they cannot find an issue, so conclude it is my word/office for mac. On a pc, the solution seems to be registry repair. Is their a solution on mavericks?

ok its fixed.. it was network probs

Problem with wrt54gl Cannot find server or DNS Error

Similar Messages

Maybe you are looking for