Problem with X environment configuration
I have Desktop PC -> DELL OptiPlex GX260 with monitor LCD DELL 2405FPW (24" optimal Preset Resolution -> 1920 x 1200). Next I installed Solaris 10 x86 version march 2005. All devices from OptiPlex GX260 configured succesfully including integrated graphics card Intel 82845G. But I dont can correctly installed and configured graphics display device -> DELL 2405FPW. After this I cant run Xserver in runlevel 3 (CDE or Gnome) logs: Cant open Xserver... Question is: Its possible correct configure graphics card Intel 82845G and display device DELL 2405FPW (of course I try configuring this by used command kdmconfig?
Any sugestion, someone have this or similar problem?
http://docs.info.apple.com/article.html?artnum=304424
Similar Messages
-
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Itunes won't run because of some problem with my audio configuration? help!
it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!
Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards. -
ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration
Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media EditionIt is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG -
Detected problem with the audio configuration
Hi guys, can anyone help me with this problem?
i really have no idea how this error occured. Coz i didnt do anything with the audio configuration.
I worked well before i updated the iTunes.
The error is:
"The iTunes cannot run because it has detected a problem with your audio configuration"
Thanks...Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem
-
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.
I'm having the same problem. I have downloaded Itunes again but still the same problem.
-
ITunes has detected a problem with your audio configuration, audio/video
When i open iTunes i recieve a message saying "iTunes has detected a problem with your audio configuration, audion/video playback may no operate properly." iTunes opens fine after i click ok on the message. However when i push play to hear a song nothing happens, the time for the song remains at zero's.
This error can be caused by a bad installation of QuickTime. Remove iTunes and QuickTime, and reinstall iTunes (which will reinstall QuickTime). You can find the steps to remove and reinstall near the bottom of this article in the Apple knowledege base.
-
ITunes has detected a problem with your audio configuration...?!!?!?!?!?!
i get thins message when i open itunes...
"iTunes has detected a problem with your audio configuration. Audio/Video playback man not operate properly."
HOW DO I FIX IT??Sounds like several people still have this problem... including me.
I upgraded to a new PC (still running XP , installed iTunes 8.0.2.20, reloaded my library...
And I got the "iTunes has detected a problem with your audio configuration" error.
I've deinstalled and reinstalled Quicktime to no avail.
iTunes seems to launch okay after the error.
But when I select a song and click "play", the song and time-counter show up correctly, but the song does not play... the "play head" stays stuck at 0:00.
I've imported new CDs, and the problem is the same with them.
This sounds like an unsolved problem... where do we go from here? -
" itunes has detected a problem with your audio configuration....." PLZ HLP
every time i open up my itunes it comes up with
" itunes has detected a problem with your audio configuration audio/video playback may not operate properly"
then when i tunes does open up i double click on a song and it dosent go, it dosent even show that its playing
please help i desperately need musicThis is usually caused by a Quicktime problem. This Apple article works for most people:
http://docs.info.apple.com/article.html?artnum=304424 -
Itunes has detected a problem with your audio configuration. audio video playback
itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!
See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696 -
I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?
Try reinstalling QuickTime, as this article suggests
http://docs.info.apple.com/article.html?artnum=304424
Other people have had luck with deleting their QT rpeferences file:
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp
Maybe you are looking for
-
VLD-2550 and 2551: CLOB datatype errors
Hi All I've been trying to solve thi sproblem but have not been able to find a solution. Basically I have a Col1 (of table A) of clob datatype which is to be mapped to Col2 (table B). But when I validate the map I get the error: VLD-2550 : BLOB,CLOB
-
Exchange OWA does not load OWA for Exchange 2010 users
I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forb
-
Wondering if I can get some clarification on an issue i'm having with Flash CS6 and mountain lion 10.8.3: I recently purchased a 27" iMac i7 3.4Ghz 16Gram for use as a work machine running Flash CS6. However any time I open any .fla (flash file) lar
-
I want to download movies from Putlocker to my ipad directly on off hours. I read to get the VLC media (free) app. I put in the address for Putlocker and it stated that this version did not support this address. Help! I am new to this and want an
-
Importing into partitioned table from unpartitioned table
I have taken export of a unpartitioned table using datapump. I want to import data using these dumpfiles into a partitioned table using impdp. Can you please provide me the basic script, I have tried running using the following script and I got the f