Problem with X99S GAMING 9 AC - PCIE-PORT reporting V1.1 same with SLI

Yeah as the topic is saying, I got issue with my PCIE 3.0 ports, they are saying my grafic cards are running at x8 1.1
I should first mention that I had these issues for a while, and I also updated all drivers to the latest versions, but still same issues. I got the 1,4 bios version for the motherboard and the nvidia V344.65 that was released today.
I tried to change it in bios from auto to gen 3 on the PCIE-ports, but still same results.
I made a post earlier about that SLI running slow in WoW and 3Dmark Firestrike. Maybe this is the source to the issue due to the ports running at 1.1 and not 3.0?
Also, in both WoW and 3Dmark Firestrike, I get much higher FPS and results with just one grafic card activated, when I go into SLI the results drop like a rock..
The weird thing about SLI though, that it seems to work okay in games like Diablo 3 ROS and 3Dmark11.
I have my grafic cards in the recommended PCIE-ports, 1 and 4.
Here is a screenshot how it looks like in GPU-z:
Is this a known issue and is there any upcoming fix to this? Feels really bad I can't use my grafic cards to their fullest potential..
My whole computer setup:
Intel i7 5820K | MSI X99S Gaming 9 AC (bios 1.3) | SLI MSI GTX 980 Gaming 4GB | Samsung 850 Pro 512 GB | WD Red 4TB | G.Skill Ripjaws DDR4 3000MHz 4x4GB | EVGA SuperNOVA P2 1000W | Noctua NH-U14S PnP | Fractal Design Define XL R2 | 5 Noctua NF-A14 PWM 140mm fans | Windows 7 Pro 64 bit

Quote from: Svet on 12-November-14, 23:58:15
its probably because the render test doesn't handle or don't support SLI well and second card become back to idle
run something else apps., bench or games who support SLI well then check their modes
Enable sli load balancing if needs from nvidia control panel to check SLI utilization
Seems to work the correct way when I start a game, but still got issues with WoW and 3Dmark firestrike. My results with SLI is far worse then with just one single card activated. Anyone know why?
I get more FPS from WoW with one card then two, and I get much higher score in 3Dmark firestrike with just one card..

Similar Messages

P6N Platinum, Problem with SLI

Hi
I'm newbie...
I have problem with SLI, maybe Drivers isn't good for Sli...
My Specs:
Core 2 Duo 4300
Zalman 9700 NT
Msi P6n Platinum
Mem 2x1GB OCZ Reaper HPC PC6400, DDR 2 800
XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
Evga Geforce 8600GT (normal) Core 540/1400
PSU Corsair 620 HX
Maxtor 160gb SATAII DiamondMAX
I just install the driver Forceware (Version 163.63_whql) and i cannot using SLI.
Later I just uninstall my driver 163.63 and Driver Cleaner for uninstall all driver nvidia, (ALL CLEAN).
So I just install the driver Forceware (Version 163.71_whql) and Finish Installer and restart my system.
Boot Windows XP, and Show that i have mode SLI CAPABLE.
I just enable SLI and apply, suddenly Shut down my computer and turn on again, boot post and loading windows xp.
It's no activate SLI yet
What is wrong?
My system:
*** NO OVERCLOCKER, ALL DEFAULT
*** No UPDATE BIOS.
*** VERY STABLE, but no working SLI...
I have two card, is same model 8600 GT.. but different core and memory.
First PCI-ex is XFX Geforce 8600GT XXX
Second PCI-ex is Evga Geforce 8600GT
Question:
Which is the best drivers for capable SLI?
Help, for Enable SLI...
Thank you

Quote from: Abraham55 on 11-October-07, 01:11:46
I did, i put SLI Switch Card : SLI MODE, 8x + 8x
I can see two video cards, (each video cards have 8x)
So when i want enable SLI MODE, and apply, suddenly SHUT DOWN MY COMPUTER..
Make sure power cables are connected to the each one.(if they have).
"XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
Evga Geforce 8600GT (normal) Core 540/1400"
If no change try with 2x matched VGAs...

!k8n Neo4! problem with SLI

Motherboard: K8N NEO4 SLI Plat.
Ram: 150mbs ddr400
HD: 2x SATA II 80 gig HDs
VIDEO: Nvidia 6600GT
Ok heres my problem, My second video card on PCI express stopped working after storage of the computer. I switched the two video cards, they both work. I reset my bios, no luck. Enabled SLI broadcast arpeture, nope. The damn SLI switch card lost the flimsy plastic piece holding it in, tried taping it in, tryed reversing it to non-SLI, tried removing it. No go on the second video card. It worked perfectly before I took out the second card for a while. Tryed reinstalling drivers. Tried everything but removing the motherboard and reinstalling it..
Windows just wont reconigze the damn card. Both cards are firmly seated.
I'm about to take a hammer to the piece of *$##
Any ideas?

Problem fixed. Had to cram the sli selector card into the socket, and then secure it into place with 3 pennys (more of a cost than the cheap plastic piece MSi supplied ).

Problem with JPWR2 on a X99S GAMING 7

Hi,
Currently I have a problem with JPWR2 on a X99S GAMING 7 Motherboard. When I plug a 6 pin or a 8 pin on the JWPR2 the motherboard crash and the cable overheat or short-circuit. My power supply is a 1000W SIlent pro bronze. I tested with a new cable on another port on the power supply but it doesn’t work. I tested with without CPU too but still the same problem.
Can someone help me ?

you are using the Cooler master 1000W silent pro bronze right?
Normally the power supply should have 4 pin or 8 pin, the 6pin/8pin is normally for the VGA card and not for the Motherboard.
Please double check again and use the 4 pin or 8 pin for the MB.

PCI port problems with video card

I have been running 2 video cards (ati 9800pro and 7500) fine for about 2 months now. Over the weekend I came home to find the monitor with my second card garbled with black lines running up and down the screen, shifting left and right. Also, there was a problem with my promise controller (had a question mark next to it in device manager) I reinstalled that and it works fine now. My second card continues to give me problems though. Device manager picks it up and says that my card is working fine but in display settings my card does not show up. I believe it a problem with the motherboard as I have tried 2 nvidia cards with the same result. It is also not related to windows as if I change the boot config to load my second card first (pci) the black lines/wavy picture loads up with the msi screen and in the bios setup as well (totally unreadable). I've also made sure that my monitor is working fine. Any suggestions???? Thanks.
Ian

Well to tell you the truth, I don't like the sound of this ...especially since you said that you tried another card, and had the same result....Well I would first go into the BIOS and on the PNP/PCI page, check the Clear NVRAM to enabled..As this will reset all the PNP devices...See if that works ...Have you tried to switch the AGP/PCI initiation sequence in the BIOS? back and forth?...You can also see if there are any IRQ conflicts.(but you probaly did this allready)...You can also try to increase the PCI latency, If it is set to 32 go up to 64 and try...Do you have any other PCI cards with problems?...Have you tried a different PCI slot?.....Well maybee another member or moderator has some advice ...Let us know.....Sean REILLY875

X99S GAMING 9 AC Not booting - Debug 94 code - Issue with GTX 980 SLI in WoW

Hello, I bought the X99S GAMING 9 AC motherboard but have ran into some issues.
The computer won't boot when I put my second MSI GTX 980 Gaming 4 GB card in the last PCEI 3.0 port (PCIE port 5) and I get the debug LED message 94 on the motherboard. I have a SLI setup.
The first card I have in the second PCIE 3.0 port due to the Noctua U14S CPU fan takes up space for the first slot. So I have been running my grafic cards in PCIE slot 2 and 4 with some issues.
First the card in slot 2 gets really warm over 86 celsius. And second: SLI runs really poorly in World of Warcraft. I get a lot higher performance with just one card activated. I am not sure if it's cause I am not running my cards in the recommended PCIE 3.0 ports or because WoW has some issues with SLI, but I heard other people have no issues at all with WoW in SLI.
I got the same issue with 3Dmark firestrike, the cards perform really poor in SLI. I get higher score with SLI turned off..
Though SLI seems to run pretty well in 3dmark 11 and Diablo 3 Reaper of Souls.
But the main issue right now, is that the computer won't boot with the grafic cards in PCIE port 2 and 5. The solution to run them next to each other is not good, cause it gets really hot and I get bad performance in WoW and Firestrike.
Picture of my setup before I switched places with the grafic cards as you can see, it is really tight:
Any upcoming bios updates (got v1.3) that will solve this issue on the horization? Hopefully this get sorted out really soon..
My whole computer setup:
Intel i7 5820K | MSI X99S Gaming 9 AC (bios 1.3) | SLI MSI GTX 980 Gaming 4GB | Samsung 850 Pro 512 GB | WD Red 4TB | G.Skill Ripjaws DDR4 3000MHz 4x4GB | EVGA SuperNOVA P2 1000W | Noctua NH-U14S PnP | Fractal Design Define XL R2 | 5 Noctua NF-A14 PWM 140mm fans | Windows 7 Pro 64 bit

You must use the recommended PCIE slots as the manual says for your CPU type, PCIE #1 and PCIE #4 if I remember, just open the manual :P for optimal 2Way SLI, also your 5820k will limit to 28 pcie lanes only if you plan to add more vgas...the other problem is your giant CPU air cooler blocking PCIE#1, do a favor to yourself, buy a watercooler for your 5820k and your problems are gone, add some overclock in your system, low noise and better temps.
Here I use 3x980 in SLI with X99S Gaming 9 AC, going soon to WC the VGAs with EK blocks.....3way is far more temperature critical than 2way spaced one.
Cheers

Msi x99 gaming 9 ack problems

ok got my new msi x99 gaming 9 ack with i7 5930k and g.skill 2400 ram
got my corsair ax1200i
so my problems i have been working on this all night near enough but today we have progress.
so problem is when i put ram in slot 1 would not post debug 04/55/60 no keyboard or signal to monitor. so i have finally got it working and got into the bios by put just one stick in slot 5. tried all 4 sticks in slot 5 but one failed at 6f so i think now one stick is faulty. but back to main problem with slot one.
once i had it booting up i switched off system and added 1 stick in slot one.
and it would not post debug 04/55/60.
so do i ram it or do you think bios update will fix this problem thanks in advance

Last night the exact same problem occurred to my Gaming 9 ACK.
Board worked flawlessly for three months with a 5960X processor, quad channel G.Skill 3.33 memory ( 16gb- 4x4 ) and four msi GTX980 gaming in quad sli mode.
Turned off the pc last night, and today, upon start the pc did not boot.
04-55-60-04 and all over again.
Memory modules are populated in slots 1-3-5-7. After several try and error efforts, slot 7 is blocking the system from booting. All four modules checked and are fine.
Removed module in slot 7 and booted. No problem there.
After entering windows 7 environment, a second even bigger surprise surfaced.
NO SLI. Device manager sees only gtx980 in slot 1 and nothing else.
New tests.
Only pci-e slot 1 works. All others are non functional.
So I am with an 8000$ pc, which works with 12gb triple channel memory and one VGA.
Obviously motherboard has gone south.
What now ???

Hey i have problem white msi x99s gaming 7 main board led debug cod 04

hey me is Jacob. and i have thes problem White me msi x99s gaming 7 that i get code 04 in the led debug when i power it up and then it whont boot up as normal and it stands on the code 04 in the led debug on the motherboard and it just came Yesterday. and it have been runing for 7 months White no problem and that is that i have the time I have had it in. and when the led debug code 04 in the manual it say power on south bridge initiation. me bios version on me msi x99s gaming 7 is H.90

Board: MSI x99s gaming 7
Bios: Version H.90
VGA: MSI 970GTX gaming 4g, MSI 750TIGTX GAMING 2 GB
PSU: Cooler Master G750M, 750W PSU
Intel Core i7-5820k Intel® Haswell-E 3.3GHz (3.6GHz Turbo Boost) LGA 2011-v3
MEM: Crucial DDR4 16GB 2133MHz Quad-channel KIT
HDD: samsung 840 evo 120gb SSD and Seagate® Desktop SSHD 1TB
COOLER: Intel TS13A Air Cooler
OS: Windows 8.1 64bit Professional
i have tried:
1. Tested power supply with a Thermaltake power supply tester, all voltages are within range, including the CPU power connector, which i did double check to be plugged in.
2. Tried the video card in another PC, working fine, also tried it in each pci express slot (four of them) on the MSI X99S GAMING 7 board.
3. Tried resetting the bios and have also tried booting with just one memory stick in Dimm slot 1
4. Tried powering up the board out of the case with just the power supply, video and memory connected.
and it still get the samme problem as before and still stand on code 04 and still not boot up.

I have problems with pci-gpib card under windows me, What I need to know what to do in order to fix this problems?

Hi, I have installed a pci-gpib card in my computer, I have a problem with
installation, the message of troubleshooting wizard is as follow:
"One or more missing GPIB interfaces.
There are several reasons why you might encounter this problem:
Reason: Your GPIB interface is incorrectly installed.
Solution: Please verify that your GPIB interface is correctly installed
and rerun the NI-488.2 Troubleshooting Wizard.
Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
to add the interface to your system properly.
Solution: Click th
e Add Hardware button and the Add GPIB Hardware wizard
will guide you through the process of adding GPIB hardware.
Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
must be working properly in order to use the GPIB interface.
Solution: Click on the System Details button for details about the USB and
1394 host controllers.
Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
must be working properly in order to use the GPIB interface.
Solution: Use the Windows Device Manager to verify that your PCMCIA host
controller is functioning correctly. Start the control panel by selecting
"Start>>Settings>>Control Panel", open the System icon and select the
Device Manager page. If you select "View devices by type", you can look at
the PCMCIA socket properties to ensure it is correctly enabled."
And on system details the message is the next:
"USB Driver type: USB universal host controller"
"This version of windows does not su
pport IEEE 1394."
I am using Windows Me, so i want to know what i need to do to fix this
problems.
Best regards.

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

Router problems with online gaming

Hi,
I have problems with online gaming. My router is Linksys wrt54g2 and modem is ZTE ZXDSL 831AII and with two computers. I can't play any onlines game for example Counter-Strike 1.6 or Counter-Strike: Source. When I'm trying to connect in those games servers when it loads too bars I'm geting error that says: "Connection failed after 4 retries". Also I can't play StrongHold, Combat Arms and Battlefield2. I try to bypassing my router by connecting computer directly to my modem and games works. What I should do? Please help me.

Do you have problems with web browsing or other online applications? If not, the problem may lie with the games themselves. It's possible the games require ports to be forwarded to work correctly. Check the game documentation and see if this is the case.

Problems with pacman applet, and advice on a gaming portfolio

Hi
I recently made a pacman applet, im having a few problems with it though, the first time the applet is run on a browser, the ghosts(represented by squares) often dont appear or if they do, they are stuck in walls, this never happens when i run offline on my computer. Is this because the very first time the applet is run, it doesnt load properly, but the second time some of the files are in the cache so it loads fully?
Also everytime i refresh the browser the applet dissapears and is replaced with a blank space and a cross in the top left hand corner, does anyone know the reason for this?
The applet can be found below, if you do decide to play it, please bear in mind what i have said, so it might not load correctly the first time, if this is the case please refresh, or close the broswer and reopen the link! Also you will need to click the applet for it to gain focus before you can move pacman - use the arrow keys the control pacman.
http://www.renaissance-designs.co.uk/Satwant/java/pacman/
Id also be very gratful for some advice - id like a change in career, ive always wanted to get into gaming, ive had some previous knowledge in java i made a programme that could generate its own poetry in java for my dissatation, but i still never had a huge amount of confidence, and so went into websites.
BUT now i have decided to take the leap back into programming and give it a go, which is why ive made this game.
I thought id make a portfolio and try and apply for a few gaming jobs. This applet took me two weeks to make and it was in my spare time, i am fully aware its not perfect, and it doesnt look great, but i would like to know what people think of it, also how many more games do you think i should make, before i apply for gaming jobs? Does anyone have any advice on what would make a good portfolio for a java gaming job?
Thanks alot, i look forward to what you think of the game, and your advice!
SSKenth

sskenth wrote:
Thanks for getting back to me with that information, i didnt know you could see that information with just a simple right click!
But im afraid that doesnt really help me solve the problem, im not sure what all of that information means! :SI have very little experience with applets, but I can tell you what I would do to debug this (forgive me if you already know this stuff).
Look at the stack trace you get in the Java Console that I posted earlier. Each line contains a method that was called from the method on the previous line. So, java.lang.Thread.run() called sun.applet.AppletPanel.run(), which called Room.init(), etc. Look at the topmost line whose method is something you wrote, not something in the standard Java libraries. In your case it looks like PaintSurface.java (specifically, line 22). Look at what line 22 of PaintSurface.java is doing, it's calling Thread.start(). If you check out the Javadoc for Thread.start(), it says IllegalThreadStateException gets thrown if you call start() on a thread that has already started. So that's your problem. Without looking at your code, I'd assume you want to stop your thread in your applet's destroy() override, and instead of reusing it, create a new one each time init() is called.
Ill try and look into, thanks again though, it gives me somthing to work with :D
Btw when you first ran the applet, did all the ghosts(3) load up correctly?Unfortunately, no. The first time I ran it, there was only 1 ghost (or maybe all 3 overlapping each other?) at the top of the screen, and they never moved. Refreshing once made the game play as I think you want it to. Refreshing a third time gave the dreaded red X.
...oh and just out of curiosity,,, did u have fun playing the game :DSure did.

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Problem with DAQmx and Real Time PCI-7041/6040E.

Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !

Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM

I have problem with delay in serial port

I have problem with serial port. I have connected two computers by serial port and I need to create program in Labview for transfer strings using start bits and stop bits. My problem is that my program is working quite well ...when I press start bit it starts to concatenate strings and if i press stop bits it stops...this is the purpose of this program...but problem is that it working only with delay...and need that this program dont need delay, because it can only concatenating data depends on delay from start bit....I wana solved problem with delay...I dont want using delay process in my program, but allways when I try to delete this delay it stop works correct
here is my program

Ok this should be simple - if I understand you correctly.
You have the VISA session initialized with read termination character enabled. So reading the number of bytes at port is NOT the correct way to read from the port. Set the read number of bytes to something large (say 4096) and the read will return as soon as a termination character is received (or timeout).
You'll need to make sure the sending device is configured to send termination character on writes (you can set that with a VISA property node) and that you are sending the correct termination character. The default is 0x0A (newline).
Jeff

Problem with X99S GAMING 9 AC - PCIE-PORT reporting V1.1 same with SLI

Similar Messages

Maybe you are looking for