Problem with Xelsius Integration

Hi,
I have installed licenced version of Business Objects Edge Client tools and also integration kit and Xelsius. When I open the xelsius and trying to connect through manage connection - Data manager -Query As A Web service - getting problem with URL ,which URL do I need to use ?? and also I tried using SAP netweaver connection selected query and its throwing #2302 error,searched forums and found few answers for this error but still not able to fix the issue.Please let me know how to connect to xelsius to QAAWS and also to SAP netweaver connection.
Thanks in advance

Hi
#2032 can have multiple root causes. I would suggest you search on service marketplace for the error #2032 - you will find several entries. Take a look at those use cases and the corresponding solutions.
Ingo

Similar Messages

Problems with accounting integration cProjects

Dear Sirs,
I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
The project is unknown in Accounting
Message no.
DPR_FIN_GECCO006
Diagnosis
Etc..
In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released replicated.
No company code could be determined. Message No IAOM_CPROJECTS001.
In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
Best regards,
Jørgen Ruud

Hello Jørgen,
It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
logic: CPR1 -> model order -> company code
Would you please try the note 875275, if it can help.
In case that it does not help, you can eithter use the Badi method to set it hardly, or create a customer message to let SAP check it.
name of Badi DPR_FIN_GECCO_ATTR
code like following:
      ls_attribute-data_element     = space.
      ls_attribute-value            = '1000'.
      ls_attribute-field_name_orext = 'BUKRS'.
      ls_attribute-fldname_receiver = space.
      ls_attribute-struc_name_copa = space.
      ls_attribute-field_name_copa = space.
      ls_attribute-ext_attr_name    = space.
      ls_attribute-ext_attr_value   = space.
      INSERT ls_attribute INTO TABLE ct_attributes.
regards!
Zhenbo

Problems with Lync integration in App-V Package for Office 365 ProPlus

We have problems with setting Lync 2013 to automatic start after Windows start with Office 365 ProPlus App-V Package made by Office Deployment Tool. We use latest version for both (ODT and download package) at Windows 7 Enterprise 64 bit.
We have done this for Lync 2010 and also for Lync 2013 (MSI installations) and it works correctly.
User can choose to start Lync automatically, but this settings is ignored and in virtual registry is set wrong. We look for possible ways to set this by GPO (in ADMX is not this option available) by inserting in virtual registry with Package ID and user
SID in registry path.

Usually setting apps to auto start sets a registry key under HKCU\Software\Microsoft\Windows\CurrentVersion\Run, but since this registry key is inside the virtual environment, Windows does not read it at logon.
The workaround is to either set this key in the native registry (perhaps by an App-V script), or easier still, just copy the shortcut to the Start Menu\Programs\Startup folder. Since you can't really modify Office 2013 packages with the sequencer, you'd
have to add this shortcut by modifying the deployment config file.
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

BI Integration in Portal (Where to configure Port, problems with km-integr)

Hello,
I am new to BI and started to integrate BI into the portal or rather tried it.
When I open my Bex-Excel-Workbook and try to create a document (right mouse -> jump -> documents) an error occurs that the service is not reachable. This is because of an wrong port.
Could someone tell me where I can change the port that he is using when the portal is called out of excel?
Changing the port in the browser I am facing some other problems like (sorry I don't know how to translate it exactly):
Properties for the assignment couldn't be provided
Could not determinate repository for documents with this property typ
Error during open new document-dialog
Has someone an idea how to investigate this problem? could it be because of the wrong port and where to configure the port?
Thanks a lot,
Vanessa

Hi,
Please refer the below links for BI Integration in Portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
http://www.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
Hope it helps you,
Thanks & Regards,
Ravi.

Problem with ADOBE integration

Hi everyone,
I am developing simple application for ADOBE integration with webdynpro. I have installed Netweaver Developer studio 2.0.3 with Adobe designer. Previously i had NW 2.0.9 but it was sneak priview version so i can't install Adobe designer. I have also installed ACF on client machine. I have enabled Activx controls & plug-ins in Web browser. Also installed ADS on WAS. Now when i am deploying my webdynpro application on server i am getting blank screen without any PDF output. It shows a blank Box in browser. I have also checked following link for the same. But the problem remains same.
Adobe Integration - Blank Screen
So, please help me for the same.
Thanks,
Bhavik

Bhavik,
I think one of the problems you are facing is the SP3 level. I think it would be good to download the latest SP (10) from the SAP Service Marketplace, because this level contains the GA version of Web AS (including the Adobe technology) and additional fixes. SP3 was a pretty early ramp-up version.
Check the Web Dynpro integration after reinstallation and let us know if it worked.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Problem with activating integration model

When I am trying to activate an integration model, that includes a scheduling agreement (type LF), the activation isn't successfull. It isn't blocked, but it never stops.
In the screen I have a message called "determining delta model" but it never continous with executing the activation.
Does anybody know what could cause this problem?
thanks in advance
Mark Smeets

Hi,
I am facing the same problem as mentioned in the original post.
Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears. After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
I have tried following solutions mentioned in this thread.
Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out. Besides I am doing this on prduction environment and other integration models like plant etc got activated.
Please help us with this.
Regards,
Gaurav Patil

Problems with BI Integrated Planning

Hello, everybody,
We installed BI 7.0 and want to use BI Integrated Planning, but then i connect to Modeler Wizard i get error <b>No JCO Connection</b>. Our BASIS Team can't find an issue.
Maybe there is some kind of configuration in BI side, not just in BASIS?
Could you give us some advice?
Thanks in advance.
Best Regards,
Arunas Stonys

Joanne,
Are you still having issues with BI-IP? I have been troubleshooting with the basis folks in getting BI-IP up on a new system over the last few day to a week and have now gone through the process myself whereas before I had been given a system already set up. I have enclosed some troubleshooting feedback with my counterpart in getting the system up.
What type of issue are you having?
Can the basis folks start the planning modeler or planning wizard in RSPLAN even if you can't?
1. The note mentioned above 919850 and the help documentation in SPRO under
SAP NETWEAVER->Business Intelligence->BI Integrated Planning
are very helpful. They have to set the following Jco Destinations in Web Dynpro Content Administrator:
BI_MODELDATA
BI_METADATA
WD_ALV_MODELDATA_DEST
WD_ALV_METADATA_DEST
And the problem was the connection to the message server. It was not possible to connect without having a Logon group assigned. This had to be done in WI4 ABAP as well as in the SLD for this system. After that assignment connection was no problem.
2. make sure you have the portal ips in your host file.
3. have they have created an account for you in client 001 of the NW04S?
4. Have they created a portal id for you and assign the portal role com.sap.ip.bi.business_planning_showcase to you?
5. have they configured the setting for starting the planning modeler (also under SPRO)..
Hope this helps. If you have more specific questions, feel free to e-mail me directly.
Mary

Problem with the integration with remote host.

Hi,
There are two gateways to which i need to integrate one for sending only one message and another for many. So locally its working fine but when i integrate with the remote host. The gateway2 is working fine but i have a problem in gateway1 where i send only one message. That too in browser its working fine but i am not getting the exact result in that remote systems Tomcat.
Itz giving me Error 2:load
Awaiting a reply...

Hi
I am facing a problem in integrating means i am not getting the output which i want in the logs.
But if i copy paste the parameters with url in browser it works fine.
thanks.

Problems with waveform integration

What I need to do is waveform integration from an acceleration vibration signal to a velocity or displacement signal.
To take the signal to velocity, I first filter the acceleration signal (HPFilter, 5Hz) to remove any offset and the perform the integration.
To probe the method, I use a signal composed by one sine WF with amplitude 1. The test consist in vary the frequency of the sine WF and evaluate the value obtained by the FFT of the integrated signal.
For a freq of 10 Hz, i obtained a value of 0,015931 which is nearly the expected 1/(2·pi·10)=0,015916
for a freq of 150 Hz, i obtained a value of 9,8130e-4 instead of the expected 1/(2·pi·150)=1,061e-3
for a freq of 450 Hz, i obtained a value of 7,91922e-5 instead of the expected 1/(2·pi·450)=3,537e-4
as you can see, higher the frequency, higher the deviation from the expected value. i am triyng to get this solve, but in this moment i don't know why this phenomenon occur.
any help will be well recibed.
CJMV

OK, that's a really good point, i am agree with it.
do you have made a study of the relationship between the sampling frequency and the maximum frequency of the signal?.
i am going to make it anyway, but to compare...
another point related to the waveform integration:
i rote in an application note that it is recommended to use a FIR filter instead of an IIR because it has less phase distorition of the signal. however, if you ask for the filter information and plot the "phase H(w)", you will se a big distortion in phase introduced by the filter.
in the other hand, if you do the same thing with an IIR filter, you will find that the phase distortion is less.
conclusion: i am using an IIR filter with a Fc of 5 Hz.
greetings
CJMV

Problems with derivative/integral in PD control for real time.

Hello to you all,
I'm using Labview 8.5 to build a PD controller.
i'm using a PXI 8187 with FPGA 7831-R.
I run a simulation of the controller both in matlab and laview using the simulation module and it worked fine.
the next step is to build the PD controller in a new VI and use it control the signals from the FPGA,but when i try to use others form of derivatives,including the mathematic's backward derivative, but the system is not stable any more.
does anyone know what can i use to replace the derivative block that will work the same?

hello again,
i've posted the VI's in here:
http://hl2.bgu.ac.il/users/www/18850/labview/
the system should be settling around the set point 0:
the file:1st working pd is the same as in the picture: the system is stable, but i cant use a simulation to when using a RT controller.
the file 1st not working Pd is the same as the working one,but instead of using the simulation continous derivative and integral i used other whioch doesnt seem to work.
the file PD2 represent how the PD controller should look standalone- location X as input and current I as output.
the file 2nd not working vi uses the PD2.vi to simulate the system unsuccesfully.
you can change the running time of each vi to see how the 1st working one is stable around 0 and how the other ones are not.
I hope that would help you guys to figure out what is wrong and let me continue my gradguation project.
thanks again.
elad.

Problem with Desktop Integrator

Hi,
I want to use the "Desktop Integrator " In oracle applications R12.
But i get this error message :
Desktop Integration is not a valid responsibility for the current user. Please contact your System Administrator.
Help,
Saad

Is this module installed in your instance?
Can you reproduce the issue with other users?
Please see if the suggested solution in (XML Publisher Administrator is not a Valid Responsibility for the Current User [ID 1192054.1]) or (How to Enable a New Function to be Available for Other Responsibilities [ID 307970.1]) is applicable.
Any other details about the error in Apache log files?
Thanks,
Hussein

Problem with data integration when using KCLJ

Hello,
For a project, I had to integrate a new field using transaction KCLJ.
For this I extented the DDIC structure of the sender structure, and after that, I updated the corresponding transfer rules.
When I execute transaction KCLJ I have no error, and table BUT000 is updated with the data of the flat file.
The problem is that erase also 6 BUT000's fields; they're not in the sender structure and so, have no transfer rules.
Could you help me ?

Hi
Please read this.
External Data Transfer
These activities are not relevant if you use a CRM/EBP system.
In the following activities you make definitions for transfer of business partner data or business partner relationship data from an external system to a SAP System.
Data transfer takes place in several stages:
1. Relevant data is read from the external system and placed in a sequential file by the data selection program. The data structure of the file is defined in the sender structure.
This procedure takes place outside of the SAP environment and is not supported by SAP programs. For this reason, data changes can be made at this point by the data selection program.
2. The sequential file is stored on an application server or a presentation server.
3. The SAP transfer program reads data from the file and places this in the sender structure. This does not change the data. This step is carried out internally by the system and does not affect the user.
4. Following transfer rules that have to be defined, the transfer program takes the data from the sender structure and places it in the receiver structure. During this step you can change or convert data.
The receiver structure is firmly defined in the SAP system. Assignment of the sender structure to the transfer program, and of the transfer program to the receiver structure is made using a defined transfer category.
5. The data records in the receiver structure are processed one after the other and, if they do not contain any errors, they are saved in the database.
Before you transfer external data for the first time, make the following determinations:
The structure of the data in the external system may not match the structure expected by the SAP system. You may have to supplement data.
There are two ways in which you can adapt the structure:
You make the required conversions and enhancements within the data selection program prior to beginning the transfer to the SAP system. This will be the most practical solution in most cases since you have the most freedom at this point.
You do the conversion using a specially developed transfer program and transfer rules.
You then define the fields of the sender structure. The system offers you the option of automatically generating a sender structure that is compatible with the receiver structure.
You define transfer rules to create rules according to which the fields of the sender structure are linked with those of the receiver structure.
You now carry out the transfer.
SAP Enhancements for External Data Transfer
The following SAP enhancements are offered in the following areas of External Data Transfer:
Four Customer Exits exist for the data transfer or for the conversion from IDOC segments. The Exits are contained in the enhancement KKCD0001. As soon as the Customer Exits are activated, they are carried out for all sender structures or segments. The first two Customer Exits require minimal coding once they are activated. The sender structure concept is used when loading data into the SAP-System. The concept Segment is used in the context of the distribution of the SAP-System. It is a matter of a record of data to be transferred or converted. It is recommendable to code a CASE -instruction within the Customer Exit, where (differentiated according to sender structure (REPID) or segment) various coding is accessed. In the parameter REPID, the name of the segment for the conversion from IDOC segments. The parameter GRPID is not filled out with the conversion from IDOC segments. You should have a WHEN OTHERS branch within the CASE instruction, in which the 'SENDER_SET' is allocated to the 'SENDER_SET_NEW' or the 'RECEIVER_SET' to the 'RECEIVER_SET_NEW'. Utherwise the return code will have its initial value. You can view a possible solution in Code sample.
The first Customer Exit is accessed before the summarizing or conversion. It is called up as follows:
CALL CUSTOMER-FUNCTION '001'      EXPORTING            GRPID          = GRPID       "Origin            REPID          = REPID       "Sender program           SENDER_SET     = SENDER_SET "Sender record      IMPORTING           SENDER_SET_NEW = SENDER_SET "modified sender record            SUBRC          = SUBRC.      "Returncode
If the variable 'SUBRC' is initial, the modified record is edited further or else passed over. The import parameter 'SENDER_SET_NEW ' must be filled out in the Customer Exit, as only this field and not the field 'SENDER_SET is further edited. This also especially means that you must allocate the import parameter 'SENDER_SET_NEW' the value of 'SENDER_SET' for records, for which no special handling will be carried out otherwise.
The second Customer Exit is accessed after the summarization and before the update:
CALL CUSTOMER-FUNCTION '002'   EXPORTING     REPID            = REPID           "Senderprogramm     GRPID            = GRPID           "Herkunft     RECEIVER_SET     = RECEIVER_SET    "verdichteter Satz   IMPORTING     RECEIVER_SET_NEW = RECEIVER_SET    "modifizierter verdichteter Satz     SUBRC            = SUBRC.          "Returncode
The modified record is only updated if the variable 'SUBRC'
is initial.
The import parameter 'RECEIVER_SET_NEW' must be filled out in the Customer Exit, since only this field and not the field 'RECEIVER_SET _NEW' is updated.
The third Customer Exit is used for replacing variables. It is called up when you load the transfer rules.
CALL CUSTOMER-FUNCTION '003'     EXPORTING       REPID = REPID       GRPID = GRPID       VARIA = VARIA       RFELD = RFELD       VARTP = VARTP     CHANGING       KEYID = KEYID     EXCEPTIONS       VARIABLE_ERROR = 1.
The parameters REPID and GRPID are supplied with the sender structure and the origin. The variable name is in the field VARIA. The name of the receiver field is in the parameterRFELD. Field VARTP contains the variable type. Valid types are fixed values of the domain KCD_VARTYP. You transfer the variable values in the parameter KEYID. If an error occurs you use the exception VARIABLE_ERROR.
the fourth Customer Exit is required in EC-EIS only. It is called up after the summarization and before the determination of key figures. It is a necessary enhancement to the second Customer Exit. This is because changes to the keys are considered before the database is checked to see if records exist for the keys.
The function is called up as follows:
CALL CUSTOMER-FUNCTION '004' CHANGING    RECEIVER_SET = R    SUBRC = UE_SUBRC.
The parameter RECEIVER_SET contains the receiver record to be changed. The parameter RECEIVER_SET is a changing parameter. No changes must be made to the function module if it is not used.
The User-Exits can be found in the Module pool 'SAPFKCIM'. If you want to use the Customer Exits, you can create a project and activate the Customer Exits with the transaction 'CMOD'. The enhancement which you must use with it is KKCD0001.
Note that when programming customer exits, that these will also run if corrected data records are imported into the datapool within the context of post processing for both test and real runs.
I will provide some pointers soon. Give me some time.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Problems with Metadata Integrator noClassDefFoundError

Hi,
we have installed Business Obejcts on three different hosts.
1. Host: SQL Server 2008 for the repositories
2. Host: Business Objects Enterprise XI 3.1 SP3
3. Host: Data Services 3.2 incl. Metadata Integrator + Job Server + Access Server
If I try to configure the Metadata Integrator, I got the following error at the command prompt in the background
Exception in thread "worker" java.lang.NoClassDefFoundError: com/crystaldecisions/sdk/exception/SDKException
at com.acta.crystalrepo.config.crCompletedPage.execute(crCompletedPage.java:126)
at com.acta.crystalrepo.config.crCompletedPage.access$000(crCompletedPage.java:14)
at com.acta.crystalrepo.config.crCompletedPage$1.run(crCompletedPage.java:77)
at java.lang.Thread.run(Thread.java:595)
DB connection works fine
But the state stays at
Save Configuration .... Succeeded
connect to CMS "Pending"
Register program object ... "Prending"
Have I forgotten to install something?
I have already seen lesson "To configure Metadata Integrator after Installing SAP BusinessObjects Enterprise". But I am not sure what to do.
Please help me.
Alexander

Thank you for your help.
Do I have to install the BOE SDK Runtime on my Host for Data Services? I have found on the service marketplace a downloadfile with cdlabel.asc "BOBJ ENTERPRISE XI 3.1 SP3 NET SDK Runtime SP3". Should I install this package?
Which is the correct path for the BOE SDK if I don't have to install the sdk? I have installed Data Serive under the default path
"C:\Program Files (x86)\Business Objects"?
Thank you.

Problems with Toplink integration with JTS and WSAD

We have a very strange problem.
Description:
     We are attempting to integrate with JTS, insuring that TopLink does its transactional activity within the scope of a JTS transaction, as described in the Foundation Library Guide.
     We have a stateless session bean, a method of which implements a simple "insert" on a database table registerObject() on a unit of work). This bean is configured to use bean-managed transactions, but with a default resolver of rollback.
     The bean is launched in the WSAD test environment.
     When the bean method is invoked from the WSAD Universal Test Client (web app that runs in the same app server allowing discovery and unit test of bean methods), the code works. A row is inserted into the table, etc.
     Same code, same method, same (stateless) bean, same instance of the WSAD test environment, if the bean method is invoked from outside the application server (via a JUnit test driver that discovers the session bean via JNDI), the code breaks. The final JTS commit catches a javax.transaction.RollbackException, apparently without any sort of stack trace tacked to the exception printStackTrace() doesn't result in anything). No row is inserted.
     We can call the bean alternately, via these two approaches, under the same instance of test environment, and get different behavior.
     We don't understand. All (hopefully) of the relevant details follow.
We are using:
     WSAD Version: 5.0.1 Build id: 20030423_1316
     TopLink - 9.0.3.3 (Build 430)
     Oracle 9i
From our sessions.xml:
     <login>
          <driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
          <datasource>project</datasource>
          <platform-class>oracle.toplink.internal.databaseaccess.OraclePlatform</platform-class>
          <uses-external-connection-pool>true</uses-external-connection-pool>
          <uses-external-transaction-controller>true</uses-external-transaction-controller>
     </login>
     <external-transaction-controller-class>oracle.toplink.jts.was.JTSExternalTransactionController_5_0</external-transaction-controller-class>
From our project XML:
     <uses-external-connection-pooling>true</uses-external-connection-pooling>
     <uses-external-transaction-controller>true</uses-external-transaction-controller>
The code that breaks:
     SessionManager sm = SessionManager.getManager();
     Server ss = (Server) sm.getSession("project", TestBean.class.getClassLoader());
     ClientSession cs = ss.acquireClientSession();
     Context c = new InitialContext();
     UserTransaction t = (UserTransaction) c.lookup("java:comp/UserTransaction");
     t.begin();
     UnitOfWork u = ss.getActiveUnitOfWork();
     u.registerObject(value);
     u.commit();
     t.commit(); /* this throws javax.transaction.RollbackException */
Thanks.

Strange problem, could be a Websphere issue, or an issue with the JTSExternalTransactionController_5_0.
Try configuring TopLink to not use JTS and see if the same problem still occurs. Also turn on TopLink logging and exception logging and your Websphere server logging to see if you can get the real exception and stack that is causing the RollbackException.
This could be an issue with the JTSExternalTransactionController_5_0 as the original version of the controller did have a JTS issue. Make sure you are no the latest patch and check with support to see if they have a patch for this problem.

Problem with Xelsius Integration

Similar Messages

Maybe you are looking for