Problem with XML import MDM 7.1 SP2 u2013 XSD.exe Issue

We are upgrading MDM from 5.5 SP6 to 7.1 and currently we are in SP2 but will be upgrading to SP4 soon.
After upgrading to MDM 7.1 SP2, when we use the import Manager and try to import the XML file we got the following error message Can't open C:/Program files/SAP MDM 7.1/Import Manager/XSD.exe.
My question is this error is only with MDM 7.1 SP2?. In few days we will be upgrading to SP4. In SP4, this issue is still there?. If Yes, How to resolve this problem?.
Anyone can send me the XSD.exe file ?

Hi Lamp,
According to the SAP Note: 1331426 - missing xsd.exe File, the error occurs due to missing xsd.exe file in the import manager executable.
This file doesn't come with the installation files and is part of the Microsoft .NET Framework SDK (Software Development Kit) 2.0, which can be downloaded from the download center of the Micrsosoft website.
Steps:
1. The xsd.exe file has to be downloaded from the Microsoft site: http://msdn.microsoft.com/en-us/netframework/aa731542.aspx
2. The xsd.exe itself is only 76 KB in size, so you need to download only this single file instead of the whole 250(?) MB .NET SDK installation. Even if you download the .NET SDK, you don't have to install it. Just extract the .cab file (e.g. using WinZip), open it (again using WinZip), extract the file that starts with "xsd" to the Import Manager directory and rename it to "xsd.exe".
3. Execute it in the below path: C:\Program Files\SAP MDM 7.1\Import Manager
You need to do it for SP4 too.
I do have the file. Let me know where I should send it.
Thanks,
Priti

Similar Messages

Problem with XML import MDM 7.1 - Can't generate Xml Schema

Hi All,
When I try to open an XML file using Import manager, I'm getting some errors, as detailed below. I mention that I'm using MDM 7.1.
The first error I received was the following:
"Can't open C:/Program files/SAP MDM 7.1/Import Manager/XSD.exe". I copied the file xsd.exe in the Import Manager folder, as suggest here:
Re: Import Manager Error.
Afterwards, I received a new error:
"Can't generate Xml Schema for: C:/Program files/SAP MDM 7.1/Import Manager/filename.xml"
If anyone has faced the same problem - and solved it -, could you please help me find the reason for this behaviour?
Regards,
Laura

Hi Laura,
The error message "Can't generate Xml Schema" might be related to DTD. the XML file has a directive for loading DTD.
MDM doesnot support DTDs.
Remove the DTD line and make sure there is only one root element in the XML file and try again.
Hope this helps,
Bes t Regards,
Silpa Chillakuru

Problems with XML import to PDF form esp. checkboxes

I am posting this here because it was suggested to me to do so when I posted it here:
http://forums.adobe.com/message/5613723
Hi,
I work with a certain PDF form created by the US government. They recently "upgraded" the form. (N600K)
With the old form, I would import values in an XML file, which worked fine.
With the new form, I have encountered a problem:
The checkboxes behave as if they are ALL one group of radio buttons, which means only one can be selected at a time.
There are quite a few questions with checkbox answers. If I or my xml file select any one if them, the rest get cleared.
I have contacted the US government about this, but surprisingly, they have not responded.
If you are familiar with designing PDF forms and think you might be able to understand my problem and help fix it, i would love to hear from you!
Please email me at gidon.ariel @ gmail.com

Tundra Steve, it sounds like that, that all the checkboxes behave like one
set of radio buttons. But they aren't. They are separate sets of
checkboxes, and while some sets could behave like radio buttons
(male/female, for example), they should really all behave like the
checkboxes that they are, and allow any and all to be selected.
Thanks and God Bless,
Gidon Ariel [email protected]
cell 054-5665037, home 02-5354586, VoIP 845-445-1604
Israel fax 1532-5354586, USA fax 623-433-4874
Maale Hever, DN Har Hebron 90420 Israel
http://www.facebook.com/gidonariel http://bit.ly/gidon-linkedin
"Happy are those who have discovered
that the secret of life is to be nice to others"

Problems with XML import from FCP 7 to Premiere Pro CS6

Afternoon everyone.
I'm currently trying to import an FCP 7 project file that I want to now edit and tweak in Premiere Pro (have recently realised i've been using Premiere far more so would like to start making a full switch over).
I've gathered my original FCP project and exported via XML (Apple Interchange Format, Version 5) and imported it into a blank Premiere Pro project. However it gets to the import window, progresses fully to 100% and then throws this error message at me, and I can't seem to figure out why.
I've tried exporting an XML for the whole project, with all bins/sequences/clips etc. I've also tried individual sequences/bins, and none of them want to import.
Does anyone know why this is happening?
Thanks,
Adam

Okay, after trying both steps in the document above, the missing codecs/preview presets still aren't available when I go to File>New>Sequence. I guess that's the only way to check if they have installed correctly/activated correctly right? It says it's correctly activated though so not sure why it's doing this.
Are these presets also missing in the trial verison of the software?

Problem with XML on Linux

hi everybody,
I've a big problem with XML on Linux, in details I see my program stopping on Linux at the instruction
XMLReader xr = XMLReaderFactory.createXMLReader("org.apache.crimson.parser.XMLReaderImpl");
and it's strange because on Windows it runs and there aren't problems about permissions on files, does anyone knows what to do?
thanks in advance!
Stefano

What happens on that line? I'm assuming you get some kind of error or exception.
Make sure the JAR file for Crimson is in your classpath.

Problem with XML in APEX ORA-06502

i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
declare
l_XML varchar2(32767);
begin
select xmlElement
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("razonSocial", J.RAZON_SOCIAL),
xmlElement("idRepre", J.ID_REPRE),
xmlElement("rucContador", J.RUC_CONTADOR),
xmlElement("anio", J.ANIO),
xmlElement("mes", J.MES),
xmlElement
"compras",
select xmlAgg
xmlElement
"detalleCompra",
--xmlAttributes(K.ID_COMPRA as "COMPRA"),
xmlForest
K.COD_SUSTENTO as "codSustento",
K.TPLD_PROV as "tpldProv",
K.ID_PROV as "idProv",
K.TIPO_COMPROBANTE as "tipoComprobante",
to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
K.ESTABLECIMIENTO as "establecimiento",
K.PUNTO_EMISION as "puntoEmision",
K.SECUENCIAL as "secuencial",
to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
K.AUTORIZACION as "autorizacion",
to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
xmlElement
"air",
select xmlAgg
xmlElement
"detalleAir",
xmlForest
P.COD_RET_AIR as "codRetAir",
to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
from ANEXO_COMPRAS P
where P.ID_COMPRA = K.ID_COMPRA
AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
AND K.ID BETWEEN 1 AND 25
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
declare
l_XML CLOB;
begin
--Oculta XML
sys.htp.init;
wwv_flow.g_page_text_generated := true;
wwv_flow.g_unrecoverable_error := true;
--select XML
select xmlElement
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

JohannaCevallos07 wrote:
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
Thanks

Problem with export / import

Hi everybody, I am having a problem with an import. I am doing an export with a value in an user exit:
EXPORT V_NLQNR = V_NLQNR TO MEMORY ID 'QUANTL'
And after I call import in another program:
IMPORT V_NLQNR = V_NLQNR FROM MEMORY ID 'QUANTL'.
But when I check the sy-subrc I am getting 4, so I don't get anything.
Does anybody why?? Is there a problem if I call the export from an user exit??
Thanks in advance.

Hello,
I think you have the right idea.
As a suggestion I would name my variables to make it clear which data is being
exported/imported. I would also use different names on the left and right side of the = sign.
Here is a working example from programs that I use:
In the first program
   EXPORT intercodata FROM g_data_exp TO MEMORY ID 'INTERCOWOS'.
     where g_data_exp is declared as a global variable
In the second program
   IMPORT intercodata TO g_data_imp FROM MEMORY ID 'INTERCOWOS'.
     where g_data_imp is declared as a global variable
The syntax that you use ( p1 = dobj1 ) should work as well, just make sure that the variable v_nlqnr to the right of the equal sign has a value before the export.
Regards
Greg Kern

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Problem with XML FCP import - grey hash marks

I have an XML import from FCP and roughly half of the clips have the grey hash marks presumably because the clip is pointing to in and out points that are unavailable in the source file. I've seen these hash marks when a clip was shortened in an external editor, like Audition. Sometimes you will see only half the clip with the hash marks in that case. I suspect the project file is either misinterpreting the framerate of some of the footage (most likely, I think) or the translation from XML is inaccurate. All the source files play fine in the source monitor so I don't suspect a codec problem, but if you look for the in and out points of the selected clip they are often long after the video has ended. Normally if the source clip is offline it appears red.
The other odd thing, not sure if related, is that the audio gain in the clip efffects , which drives the yellow line, is set to -infinity in each which I manually reset to 0.
If anyone has any experience with this problem please share. I can manually slip all these clips to reveal the proper portion of the clip but that will be a tedious process obviously. I would love a global solution.
Thanks in advance.
Chris

brigzor wrote:
I don't really need to open it in premiere, any program in windows would be fine, all I need from this .xml file is to be able to check the names of the clips in the sequence and in which order they are sequenced, I don't need to edit it just be able to look at the sequence and the filenames and general source clip structure, so if it really isn't possible in premiere i would appreciate other software suggestions.
If this is the case, return to the project in FCP and export and EDL instead of an XML file. You can designate that the EDL include the Clip names or File names for each clip and will let you see them and where they reside in the sequence. Once you have exported the EDL, which is a text file, open it in Text Edit and print it out.
MtD

Problem with XML loading and xmlns

I'm having a problem with loading an XML file that was created by Filemaker. Filemaker will output an XML file using one of two different grammars. One outputs in a mostly standard form that I can use with one glitch. Flash CS4 AS3 seems to have a problem with the xmlns in one of the nodes.
Specifically:
<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
If I remove the xmlns="http://www.filemaker.com/fmpdsoresult" the file loads properly and I can access the various fields with no problem. However, when I leave the xmlns=... in, it will trace out the XML properly but I can't access the fields using the code listed below. This is driving me crazy!
With the xmlns part in the XML file I get the following error when it tries to load the thumbnail files:
TypeError: Error #1010: A term is undefined and has no properties.
I need to have it so that the user can enter/edit data and simply output the XML file from Filemaker and then Flash will load up the unaltered XML file and show the info requested by the user. That is to say I could have the user open the XML file in a word processing application and have them delete the xmlns..., but that is rather cumbersome and not very user friendly.
I've tried every xml.ignore function I could find but it doesn't help. Hopefully someone out there can help
Thanks,
-Mark-
Partial XML:
XML From Filemaker Export:
<?xml version="1.0" encoding="UTF-8" ?>

<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
<ERRORCODE>0</ERRORCODE>
<DATABASE>Sport.fp7</DATABASE>
<LAYOUT></LAYOUT>
<ROW MODID="1" RECORDID="1">
    <FirstName>Mark</FirstName>
    <LastName>Fowle</LastName>
    <Sport>Sailing</Sport>
    <Medal>None</Medal>
    <CourseOfStudy>Design</CourseOfStudy>
    <Year>1976-1978</Year>
    <HomeState>California</HomeState>
    <ImageName>93</ImageName>
</ROW>
</FMPDSORESULT>
AS3 Code:
import fl.containers.UILoader;
var aPhoto:Array=new Array(ldPhoto_0,ldPhoto_1,ldPhoto_2,ldPhoto_3,ldPhoto_4,ldPhoto_5);
var toSet:int=10;//time out set time
var toTime:int=toSet;
var photoPerPage:int=6;
var fromPos:int=photoPerPage;
var imgNum:Number;
//var subjectURL:URLRequest=new URLRequest("testData_FM8.xml");
var subjectURL:URLRequest=new URLRequest("Sports.xml");
var xmlLoader:URLLoader=new URLLoader(subjectURL);
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
var subjectXML:XML = new XML();
subjectXML.ignoreWhitespace=true;
subjectXML.ignoreComments=true;
subjectXML.ignoreProcessingInstructions=true;
function xmlLoaded(evt:Event):void {
    subjectXML=XML(xmlLoader.data);
    if (root.loaderInfo.bytesTotal==root.loaderInfo.bytesLoaded) {
        removeEventListener(Event.ENTER_FRAME, xmlLoaded);
        trace("XML Data File Loaded");
        trace(subjectXML);
    } else {
        trace("File not Found");
    imgNum=2;//subjectXML.ROW.length;
    trace(subjectXML);
    loadThumb(0);
function loadThumb(startPos:int):void {
    var count:Number=aPhoto.length;
    trace(subjectXML.DATABASE);
    for (var i=0; i<count; i++) {
    try{
        aPhoto[i].source="images/"+subjectXML.ROW[startPos+i].ImageName+"_main.jpg";
    }catch (e:Error){
        trace(e);
        aPhoto[i].mouseChildren=false;
        aPhoto[i].addEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
    ldAttract.visible=false;
function unloadThumb():void {
    var count:Number=aPhoto.length;
    for (var i=0; i<count; i++) {
        aPhoto[i].unload();
        aPhoto[i].removeEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
function onThumbClick(evt:MouseEvent) {
    var i:Number;
    //trace("Thumbnail Clicked " + evt.target.name);
    i=findPos(evt.target.name);
    ldLrgPhoto.source="images/"+subjectXML.ROW[i+fromPos].LOCAL_OBJECT_ID+"_main.jpg";
    ldLrgPhoto.visible=true;
    btnPrev.visible=false;
    btnNext.visible=false;
    gotoAndStop("showPhoto");
function findPos(thumb:String):Number {
    var pos:Number;
    var count:Number=aPhoto.length;
    for (var i:Number=0; i<count; i++) {
        if (thumb==aPhoto[i].name) {
            pos=i;
    return pos;

Hi,
I was trying to use xml namespaces, so in my application I receive an XML file from the server. The file has a namespace, so when I parse the file I need to specify the namespace:
I got the following piece of xml:
<ls:exchange xmlns:ls=".../tsw" xmlns:tm="http://kxa">
    <ls:projects>
         <tm:annotation id="" date="" action="getprojects" status="responseok"/>
    <ls:project id="" name="proj" description="..." owner="asss" release="2" />
        <ls:projectV id="" version="" creationdate="" modificationdate=""/ >
    </ls:project>
</ls:projects>
</ls:exchange>
and the following code
<mx:VBox label="WELCOME" verticalScrollPolicy="off" horizontalScrollPolicy="off">
      <mx:Tree id="tree" dataProvider="{srv.lastResult.project}" labelField="@name" width="300" height="100%" itemOpen="itemOpenEvt(event);" />
</mx:VBox>
So i want to display the content of the xml (project nodes”) in a tree view, but i don’t know how to includes the namespace"ls:" in the data provider “srv.lastResult.project”. can u help me it’s urgent.
sincerly
Celine

Layout Problem in XML Import

Dear All,
I am new in InDesign. I have some problem. I am using InDesign CS3. I want when XML file will be import layout should be come according to our specification with image. Is it possible any script or XSLT. If yes please give me some guiduence.
I have done XML to Tagged Text using XSLT. But i want to go through XML Import options.
Anyone please help me...
Thanks and Regards,
Byomokesh

If possible, purchase a copy of A Designer's Guide to Adobe InDesign and XML: Harness the Power of XML to Automate your Print and Web Workflows.
This book will answer most questions you might have about using XML with InDesign.
For a short answer, you need to first create styles, then map them to the tags, then import the XML. I will send you an example via email (the author emailed me directly).
Best regards,
Tad

Problems with VLM Import Utility

Hello!
We I are using NI Volume License Manager 3.0 together with NI Volume License Manager Import Utility for importing users data.
The problem is that we can't import .xml data into VLM when the user types his name into Full Name field and his name contains characters like ČŠĆŽĐ čšćžđ. These characters are not correctly written into .xml file with VLM Import Utility and we have to manually replace them with Microsoft Expression Web before we can load .xml file into VLM server.
Do you have better solution? Is there some new version of NI Volume License Manager Import Utility that correctly handles non English characters?
Thank you
Bojan Gergič
Solved!
Go to Solution.

Hi
Sorry for not having a god news. This issue is a known bug (You can refere to it by a number CAR - Corrective Action Request - #320545). Unfortunatelly, I have no knowledge about a workaround for this.
Regards
Barbara

Problems with XML-RPC

Hi everybody.
Sorry, I've got a french accent, then if you don't understand, dont' be worry ^^
I try using the apache's xmpl-rpc package, and I have got some problems with the xml-rpc client.
Here my source :
public interface ICalculator {
     public int add(int i1, int i2);
     public int subtract(int i1, int i2);
public class Calculator implements ICalculator {
     public int add(int i1, int i2) {
          return i1 + i2;
     public int subtract(int i1, int i2) {
          return i1 - i2;
import org.apache.xmlrpc.server.PropertyHandlerMapping;
import org.apache.xmlrpc.server.XmlRpcServer;
import org.apache.xmlrpc.server.XmlRpcServerConfigImpl;
import org.apache.xmlrpc.webserver.WebServer;
public class Server {
private static final int port = 8080;
public static void main(String[] args) throws Exception {
WebServer webServer = new WebServer(port);
XmlRpcServer xmlRpcServer = webServer.getXmlRpcServer();
PropertyHandlerMapping phm = new PropertyHandlerMapping();
phm.addHandler(Calculator.class.getName(), Calculator.class);
phm.addHandler(ICalculator.class.getName(), ICalculator.class);
xmlRpcServer.setHandlerMapping(phm);
XmlRpcServerConfigImpl serverConfig =
(XmlRpcServerConfigImpl) xmlRpcServer.getConfig();
serverConfig.setEnabledForExtensions(true);
serverConfig.setContentLengthOptional(false);
webServer.start();
System.out.println("Serveur XML-RPC is ready");
import org.apache.xmlrpc.client.XmlRpcClient;
import org.apache.xmlrpc.client.XmlRpcClientConfigImpl;
import org.apache.xmlrpc.client.XmlRpcCommonsTransportFactory;
import org.apache.xmlrpc.client.util.ClientFactory;
public class Client {
public static void main(String[] args) throws Exception {
// create configuration
XmlRpcClientConfigImpl config = new XmlRpcClientConfigImpl();
config.setServerURL(new URL("http://127.0.0.1:8080/xmlrpc"));
config.setEnabledForExtensions(true);
config.setConnectionTimeout(60 * 1000);
config.setReplyTimeout(60 * 1000);
XmlRpcClient client = new XmlRpcClient();
System.out.println("Connection");
// use Commons HttpClient as transport
client.setTransportFactory(
new XmlRpcCommonsTransportFactory(client));
// set configuration
client.setConfig(config);
ClientFactory factory = new ClientFactory(client);
ICalculator calc = (ICalculator)factory.newInstance(ICalculator.class); //Problems here !!!
System.out.println("Calculing");
System.out.println("Result : " + calc.add(2, 3));
And the error is:
Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/httpclient/HttpException
     at org.apache.xmlrpc.client.XmlRpcCommonsTransportFactory.getTransport(XmlRpcCommonsTransportFactory.java:31)
     at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
     at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
     at org.apache.xmlrpc.client.util.ClientFactory$1.invoke(ClientFactory.java:104)
     at $Proxy0.add(Unknown Source)
     at projet.Client.main(Client.java:45)
Can you help please ?

The problem is not related to your code, but it seems that there is a missing jar which contains the class org.apache.commons.httpclient.HttpException or perhaps the jar isn't included in your CLASSPATH.
The jar seems to be commons-httpclient.jar you can found at http://jakarta.apache.org/commons/httpclient

Performance and usability problems with Illustrator imports

I am usually an enthusiast advocate for Adobe Software. As a UI/Interaction designer I regularly showcase your products as a shining example.
That's why I am somewhat frustrated about the Flash Catalyst Beta. I trust you guys to come out with SOMETHING GREAT eventually, but I have just spend an entire day with Catalyst and it was not particularly a joy. Couldn't you have released it a bit later to save me the frustration?
Situation:
- Medium size Adobe Illustrator CS4 import (10 screens/stages with 20-100 Illustrator objects per screen)
- Target : 800x600 embedded UI for medical product
- Illustrator file chosen as starting point
Performance / reliability problems include
- Crashing (Vista Core2Duo with 2gig of Ram)
- Super poor performance (wait 8 seconds to hide/show a layer)
- No show of thumbnail images anywhere
- No matching of document size (exact 800x600 from Illustrator became 800x599)
- Playing the file did not work
Usability issues
- Poor test display
- Poor match with Illustrator file (things seem to be rendered differently!)
- Window selecting does not work well
- No hand tool
- No ability to lock layers
- Cluttered interface (Not enough space for the "stage"or what you call it)
- No way to resize Illustrator elements from one of 9 edge/center points
- etc. etc.
Building a wireframe version from the ground up (with Illustrator import) seemed to work fine
I played around with the MS Blend beta for a while, and while the basic concept of your product is much more clear, the execution of the MS product in the beta phase was lightyears ahead in terms of stability and usability
I'm sure you can do better!
Koen

Koen,
Thank you for the detailed feedback about the performance problems you have experienced and your thoughts about features you would like. Let me respond to each of your points
Performance: We are aware that Catalyst doesn't perform well with large complex files. We have made many performance improvements since the current plublic beta, so you should find Catalyst more responsive with larger projects when the next beta is posted.
Here are a few things you can do to work around the performance issues you are seeing with the current beta:
- Consider rasterizing complex elements that don't need to scaled in Catalyst
- In Catalst turn complex artwork into optimized graphics using the "Convert to optimized graphics" in the float HUD (heads up display panel)
We have also found that particularly on Windows that Catalyst can run out of memory with large files. This area is also being worked on so stay tuned for the next beta.
Features:
- Poor test display [tv] Do you mean the design display doesn't match the appearance of the published project?
- Poor match with Illustrator file (things seem to be rendered differently!) [tv] we have fixed a lot of bugs here. Expect this to improve a lot in the next beta
- No hand tool - [tv] coming soon :-)
- No ability to lock layers [tv] coming soon :-)
- Cluttered interface (Not enough space for the "stage"or what you call it) [tv] Yes, Catalyst currently cannot dock/undock panels
- No way to resize Illustrator elements from one of 9 edge/center points [tv] This is also a known limitation. I agree it is useful
I hope the next beta comes closer to meeting your expectations. A lot of performance work and new features has been done since the last public posting, so look forward to beta II.
- Ty

Problem with EXPORT IMPORT PROCESS in ApEx 3.1

Hi all:
I'm having a problem with the EXPORT IMPORT PROCESS in ApEx 3.1
When I export an application, and try to import it again. I get this error message
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 16, column 28: PLS-00103: Encountered the symbol &quot;牃慥整㈰㈯⼴〲㐰〠㨷㐵㈺′䵐&quot; when expecting one of the following: ( - + case mod new not null &lt;an identifier&gt; &lt;a double-quoted delimited-identifier&gt; &lt;a bind variable&gt; avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp in
As a workaround, I check the exported file and found this
wwv_flow_api.create_flow
p_documentation_banner=> 'ç‰ƒæ…¥æ•´â ¤ãˆ°ãˆ¯â¼´ã€²ã °ã€ ã¨·ã µãˆºâ€²äµ
And when I replace with this
p_documentation_banner=> ' ',
I can import the application without the error.
somebody knows why I have to do this??
Thank you all.
Nicolas.

Hi,
This issue seems to have been around for a while:
Re: Error importing file
I've had similar issues and made manual changes to the file to get it to install correctly. In my case, I got:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.<br>ORA-02047: cannot join the distributed transaction in progress<br>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;There are several suggestions, if you follow that thread, about character sets or reviewing some of the line breaks within pl/sql code within your processes etc. Not sure what would work for you.

Problem with XML import MDM 7.1 SP2 u2013 XSD.exe Issue

Similar Messages

Maybe you are looking for