Problem with xsan - config.plist

Hello,
I have two strange errors at logs "unable to convert data object for '/Library/Preferences/Xsan/config.plist' to a property list " and "xsand[56]: Unable to read config.plist". I checked config.plist and everything looks ok . This errors showed only in system log. Everything with xsan works fine. Hardware - Mac Pro with Lion. Latest updates installed.
Any solution ?
Best regards,
Marcin

That first message seems to say it can't recognize one of the parameters. Therefore, it may not be genearting a .plist file, or cannnot access it, and you get an error message on that.
Have you inspected the file? Are the file permissions sensible?

Similar Messages

Problem with Xsan 2.1.1 and Mac Os server 10.5.6

Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.

My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

Problems with Qt Config (Xfce 4.6)

Hi
I have problems with QT Config .
I use Desktop Environments XFCE , when you save settings QT Congif (set size fonts etc ) .
Setting do not save
I have set chmod in catalog QT config .
How to fix ?
Last edited by nocentis (2009-03-16 12:00:29)

Welcome to the Apple discussion forums.
As Joeuu stated, assuming you don't have an Intel-based MacBook Pro, that means that your PowerBook is PowerPC-based. There are several steps that should get you back on track.
First, reset your power management unit (PMU). Follow directions at http://docs.info.apple.com/article.html?artnum=14449
Next, repair permissions by running Disk Utility, located in your mac hd, application/utilities folder. Highlight your hard drive and repair permissions.
Did you use the software update function or did you download the update from the Apple support site? In any event, download the combo update 10.4.6 from http://www.apple.com/support/downloads/macosx1046comboforppc.html Updates through the software update function have recently created some unique 'situations', that use of the combo update have solved.
After the update, repair disk permissions again. This is good housekeeping to do before and after any major software installation.
PB G4 1.67ghz 1.5gb; mini G4 1.5ghz 1gb Mac OS X (10.4.6)

Problem with Xsan Admin

Hello
I have a big problem with my Xsan Admin.
Yesterday by mistake my configuration of xsan admin from Application
Support are gone.
Only config files from /Library/Filesystems/Xsan/config survive, but
without one client in config.plist
Now i cant mount any clients or controllers from Xsan Admin, even when
i set to connect to existing san.
From terminal i run two volumes locally on MDC.
I also try to add i client in Xsan Admin and its work, but not full
fuctionally. Only thing i can do now, i can mount on client volumes
using terminal and command:
sudo mkdir /Volumes/volumename
sudo mount_acfs volumename /Volumes/volumename
But its still dont work, because on some cleints i receive info
"Cannot mount. License authorization failure"

Have you allowed email to be sent/relayed from your local LAN / subnet ?

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

Make offline clips problem with xsan

Hi,
I have a problem with Final cut pro and Xsan.
Mac Pro with Leopard
Final cut pro 6
Xsan 2
We have 7 Mac pro and Xsan 2. When we make offline the clips in final cut pro and select delete from disk, sometimes the QT files are deleted from Xsan volume but in FCP in the browser does not shows the clips as offline (with the red line in the clips). Sometimes, when we leave FCP and click on the desktop and
come back to FCP, makes the clips offline, but this annoying
trick, does not always work.
Thank you.

Were the clips imported from a camera? Try connecting the card and opening the camera import function?

Build shared problem with configure / config.guess

Hi,
I'm constructing some 3rd party libraries from source level with configure/automake in Suse 9.2. A common mistake in all libs is done by config.guess: it prints out "i686-pc-linux-gnuaout" which switch off the shared support at all. It's easy to workaround by print "i686-pc-linux" instead directly from configure:
ac_config_guess="echo i686-pc-linux"
Then the shared support is enabled and there left some minor problems with linker options -soname and --rpath. Then some libs can create the shared libs, for instance the apr and xml2.
Others do not, for instance log4cxx and acetao, but they do not produce any error. It looks like that simply the shared link step is not done, however the symbolic links to the release version are done. I also tryed with LD=CC and LD=cc instead of the gnu ld, but then already in config.log the shared support is not recognized. If I build by hand:
cc -shared *.o -o libACE.so
it seems to work and the result usable by applications. Since acatao includes lots of libraries to build, the manual creation is not handy / possible. So any hint to solving that are welcome. I'm using the latest sunstudio version (feb2007).
thanx rolf

It really depends on autoconf/libtool version those libs are using.
Till the most recent versions libtool had absolutely no clue that SunStudio exists on Linux. And default fallback happened to be gcc.
If you give me some specific lib (source URL or name/version) I can tell you why this lib does not configure with Sun Studio :)
Most recent version of autoconf is wize enough to handle Sun Studio on Linux. So one of the solutions for the libs might be to upgrade to a newer autoconf. Not what common user would commonly do though...
regards,
__Fedor.

Problem with the config.xml

Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
Seetesh

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Itunes7 does not let me start up because detected problem with audio config

hi,
i have had itunes for a while now but i just upgraded it to version 7. i restarted my computer afterwards but when i tried to start up itunes for the first time it said there was a problem with the audio configuration.
this is the message,
itunes cannot run because it has detected a problem with your audio configuration.
i am using windows xp and would be very grateful for any help, thanks!
lenovo 3000, N100 Windows XP

this is the message,
itunes cannot run because it has detected a problem with your audio configuration.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

New Version error - problem with audio config

iTunes has been working great on Vista so when I was prompted to download the new version I thought why not. It unloaded the old version and then loaded the new without a hitch. Went to run the new version and I get the error:
iTunes cannot run because it has detected a problem with your audio configuration.
But nothing has changed! Can anyone shed any light on this?

I can't help you but I have the same problem but with windows xp.
*** really..

Vista - Problem with Audio config!!! please help!!!

I just finished a clean install of Vista and installed iTunes. When I try to open iTunes an error message pops up saying "iTunes has detected a problem with youraudio configuration.Audio/Video playback may not operate properly." I have looked on teh forums and all I have seen is something about uninstalling QuickTime and then reinstalling it. I have tried that twice and I still get the same error message. If anyone could help that will be great.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

Problem with audio config.?

I've had this iPod...Video? Is that a 5th-generation? Whatever. Since...July or so last year. Maybe longer.
And suddenly I'm getting this weird "iTunes cannot run because it has detected a problem with your audio configuration."
Checked the audio. Works fine. Tried the "unknown error" FAQ. Still isn't working.
What's up?!
iPod Video 80 GB Windows XP ...accidentally got candle wax on it.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

Problem with X -config (freeze + black screen)

Hi, everyone. I'm a newbie in linux, so dont punch me .
I was following the beginners guide & after X -config /root/xorg.conf.new got freeze + blackscreen (alt + ctrl + bckspc or alt + Fn dont works).
I have created /X11/xorg.conf & can start X server, but X -config /root/xorg.conf.new or /etc/X11/xorg.conf gives black screen (with signal).
My VGA is HD3850.
Any ideas how i can fix it?
Here is my xorg.conf
Section "ServerFlags"
Option "AllowEmptyInput" "off"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Razer" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "InputDevice"
Identifier "Razer"
Driver "mouse"
Option "Name" "Razer Lachesis Optical Mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Buttons" "9"
Option "Resolution" "1250"
Option "ZAxisMapping" "4 5"
Option "ButtonMapping" "1 2 3 6 7 8 9"
Option "Emulate3Buttons" "true"
Option "SampleRate" "1000"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoftmult"
Option "Xkblayout" "us,ru"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV670PRO [Radeon HD 3850]"
Option "AccelMethod" "exa"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "RENDER" "enable"
Option "DAMAGE" "enable"
Option "Composite" "enable"
EndSection
/var/log/Xorg.0.log contain no errors or warnings (except ACPI & font paths)
Thx 4 help.
P.S Can add log if it helps
P.P.S Its one of my xorg.conf files, also i've used variant 4 xf86-video-ati
Last edited by InsaneDevice (2010-02-27 06:32:32)

My english is fine (i read well at least) .
At first message i said
I have created /X11/xorg.conf & can start X server...
I =can= start x server --- its mean that startx works fine & i can see 3 windows with clock . And if you mean that i dont want use x -config, then for what all this manipulations with reinstalling was?
Besides "Xorg -configure" & "x -config /etc/xorg.conf" are different things for me, because one create the basic config, while second test this config. So i thought you mean that i have to create it from scratch without using any commands
... Damn.. i just have read english & russian beginner guides. Russian says: "after installing xorg u have to create conf file, using Xorg -configure, then test it with command X -config /root/xorg.conf.new & IF IT WORK - copy to /etc/X11/xorg.conf. I didnt find that in english version .
Well, thank you for your patient & help . I think, that problem is solved (i think - say me if i wrong)
But i still want to know, why x -config /etc/xorg.conf give me that black screen + freeze, so if anybody knows - plz, message me.
Last edited by InsaneDevice (2010-03-01 07:36:42)

Odd problem with strusts config file

This morning when I started up J Developer I am unable to open my struts-config file. Last evening when I closed my application everything was working fine, I compiled and ran the app for the last time just before closing J Developer. Now I am unable to compile, open this file (it is the same with other applications, as well). I have gone back to a previous version of my app, uninstalled Jdeveloper and reinstalled. Nothing seems to solve my problem. I am working on a Windows machine. Any thoughts on what might have changed or happened would be greatly appreciated.

I think that I found the problem. Somewhere along the line I messed with the shortcut(I don't remember doing it or what I did but....) with the shortcut that I created and I got an odd path looking something like .... ...\c$\JDev\jdev\bin\jdevw.exe
I fixed that and have not had a problem since.
Thank you for your help.

Problem with xsan - config.plist

Similar Messages

Maybe you are looking for