Problem WRV200 Connect With WRT54G v.5

Hello to Everybody,
First of all, I'm sorry about my English -not the Best.
-- i wrote this message in Camera Forum Too.
and now to my problem,
i purchased the IP Camera Model WVC200 and i Installed it Perfect.
i can view, move, record and etc.
i connect it to Edimax Wireless Router.
all the function is work perfectly.
When i come back to my home, and tried to connect to the camera - i failed.
i connect to the internet by WRT54G Router I'm my home. i tried all the options possible in the setup page of the Router, Update Router Firmware and nothing is not success...
while i decide to disconnect the router and connect my computer direct to Modem i was Surprised! i can connect to the camera.
i disconnect again and connected my computer via the Router.
i changed the port of camera to 80, not yet.
Just i enter the IP with Port Number in my browser - i get the small screen that i need to enter my username and password - i entered and
wait ... wait ... wait .... wait ..... and nothing is happened. The title of the browser is changed and enough
Friends,
What i need to do ?
I hopeless.
Moshe

Hi… You need to forward the port 1024 on this router and then try to access it again.

Similar Messages

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Problem in Connecting with the server

I have a problem while sitting the e-mail. A message comes saying that the device had a problem in connecting with the server. My BB is Tourch 9860
Please help me

Hi gaf4u
Welcome to BlackBerry Support Forums
Do you already have any email account integrated with your device ?
If not then do you have a specific BlackBerry data plan / BIS from your Carier on your account ?
let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem in connecting with Oracle

hi everybody
I have a problem in connecting with Oracle express 10g. I got an error that doesn't allow me to connect. hope anyone can help me and solve this problem
--------------------Configuration: test - JDK version 1.6.0_20 <Default> - <Default>--------------------
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at DB.dbConnect(test.java:36)
at test.main(test.java:18)
this is the code that I'm following
import java.io.*; import java.sql.*; public class test2 { public static void main(String[] args) { try { Connection con=null; Class.forName("oracle.jdbc.driver.OracleDriver"); con=DriverManager.getConnection( "jdbc:oracle:thin:@PLANET:1521:ORCL", "scott", "tiger"); Statement s=con.createStatement(); s.execute("INSERT INTO BOOKS VALUES('A Tale of Two Cities','William Shakespeare',4567891231,'05-JAN-1962')"); s.close(); con.close(); } catch(Exception e){e.printStackTrace();} } }
Edited by: Vantasia on Nov 12, 2010 10:18 AM

1. Is the connection url correct?
"jdbc:oracle:thin:@PLANET:1521:ORCL" is fine.
2. Is the TNS listener started?
c:\oracle\product\ora10\bin> lsnrctl status
3. Is a firewall between client and database server?
Connection url with firewall would be different.
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jdbcthin.htm#i1004276

Problem in connection with sql server

hi ,
i am facing problem in connection with ms sql server..please help me out.... i created the database ChandanClient...and there is one table Expense_code_Table...
i want to insert the data into this table.. i am trying to create a demo example.. here is the code
package demo;
import java.sql.*;
public class getdatabase {
     public static void main(String[] args) {
          Connection con =null;
          int ExpenceCode1=1;
     String ExpenceName1="exp_paper";
     String Organization1="exp_organization";
          try
               Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
               con=DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433");
               Statement st = con.createStatement();
               String q1="INSERT INTO Expense_code_Table(ExpenceCode,ExpenceName,Organization)VALUES("+ExpenceCode1+",'"+ExpenceName1+"','"+Organization1+"')";
     st.execute(q1);
          }catch(Exception e)
               System.out.println(e);
          try
               con.close();
          catch (SQLException e)
               e.printStackTrace();
after running program
it is showing me...
java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
java.lang.NullPointerException
     at demo.getdatabase.main(getdatabase.java:22)
Exception in thread "main"
please help me out how to solve this problem...
thanks in advance...
bye
chandan sharma

Put ur driver class files in the class path...
regards
Shanu

DNS lost connection with WRT54G

I have the following problem with my WRT54G v.8 router. Sometimes when I turn on on the computer I can not access the internet. I am using a wireless connection using Vista. Running the diagnose and repair option in Vista it says there is not connection with DNS. I make a ping to the router and it is ok, ping to the cable modem and it is ok, and obviously ping to DNS and they don´t answer. After powering off and powering on the router I have again the internet connection. After some days or sessions the problem repeats. Maybe somebody have a solution for this kind of problem.

hi... try upgrading/reflashing firmware on the router, go to www.linksys.com/download and download the latest firmware for the router, after reflashing firmware on the router, reset the router back to factory default settings and logon to router's setup page, reconfigure it according to ISP settings, reduce MTU to 1458, go to wireless settings try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, fragmentation and RTS threshold to 2304...check whether it works or not...

Dropping Connection with WRT54GS v4

I have had a problem for the last week where my router drops connection intermittently about every 20-30 minutes. Once it drops, I have to unplug the router and modem and start over. It happens over and over again. Hooking up directly to the modem results in a normal, trouble-free connection. I have tried changing the channel, the SSID name and restarting everything sequentially without success. Any ideas on how to fix this would be greatly appreciated.

i started getting this problem, or at least a similar one, lately. i have a WRT54GS v6 with the latest firmware (1.50.9) that randomly decides to stop allowing wireless connections. devices that are already connected will stay connected and be able to access the internet through it, but if you restart a computer or try to connect with other devices, it doesn't find the router.
i have changed the SSID and set it so it does not broadcast the SSID, but that shouldn't cause it to stop accepting connections. i usually only have my laptop and a couple wii's connected to the router (my own and 2 of my roommates).
the only way to fix it when this happens is to unplug the router and plug it back in.

I have problems to connect with Database Server in MDM SP5

Hi,
I am upgrading to SP and get problems to connect to the database server. I am able to start and stop the MDM server, but if I tru to create a new repsoitory or unarchive a repository I get this errormessage. "Unable to connect with Datase Server". In ealier versions og MDM i did not give any username or password whwn I made a new repositirt. Do you need to that no?
I see in the mds.ini file that there is defined a user "Sql Server DBA Username=master ". I sthis the user we shall use or is there another user?
Regars John-Kjell Hoset

Hi John,
I too faced the same problem and get rid of it by installing
SQL Server 2000 Driver for JDBC Service Pack 3
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en
and i installed Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyID=413744D1-A0BC-479F-BAFA-E4B278EB9147&displaylang=en
Install with setup SAPWD="YourPassword"
I connected MDM Console wiht DBMS with Login credentials as
UserName sa
Password YourPassword
Hope this help to solve your problem.
Regards,
Santosh.

Problems to connect with VNC to headless mac mini after sleep mode

Hallo,
I've a Mac Mini (late 2009) setup with Lion Server. I want to use it without mouse/keyboard/monitor attached. Since I want to safe power ( green IT ;-) ), I would like to use sleep mode.
First thing I've learned is, that Lion Server prevents the mini to go to sleep after an idel time as set in power saving.
The only thing that works, is setting up a shedule with sleep / wakeup times.
When I start the mini, everything works great. I can connect via VNC. The Mini goes to sleep at the scheduled time and wakes up again as expected.
From this time on, things begin to get strange:
I can connect using VNC, but all i get is a grey screen with a moving cursor. So VNC is working, but there is no screen available on the Mini. Same if I use thightVNC from a Windwos PC. Get a grey screen.
Further the system does NOT go to sleep at scheduled times any longer.
I was able to track down the problem to the missing monitor: If the Mini wakes up without a monitor connected, I seems to wait to get the right resolution or what ever. All servives are working, SSH is fine even VNC works, but shows only a grey screen.
I've been playing with attaching / detaching a monitor. Sometimes I got:
- Boot with monitor
- connect with VNC, see login screen
- send Mini to sleep
- disconnect monitor
- wakeup Mini
- VNC reconnects, showing grey screen
- plug in monitor and wait until login screen appears on the monitor
- VNC switches from grey to login screen
The only way I can save some energy is a sheduled shutdown / restart. So headless works, but not after waking up from sleep.
Any hint or solutions for this ?
Thanks
Marc

Look in the security feature. This is a link to the FAQ (step 6): http://support.apple.com/kb/PH4014?viewlocale=en_US
I had the same issue when I connected my Mac Mini to be a Media Server.
/r
C.

Problem in Connecting with Ftp

Hi all,
While Connecting to the ftp i am getting the folloeing error.
"An error occurred while connecting to the FTP server 'mn01crm02:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /usr/sap/SAP MDM 5.5/Server/Distributions/D11_ORCL/ADCWECC/Inbound/SAP_ECC/NewPort2/Ready: The system cannot find the path specified. '. For details, contact your FTP server vendor."...
Previously port was not opened now the port issue has been resolved. Please focus some light on this error. what can be the possible ways to overcome this error. Considering that i have gven user namr and password correctly (TO connect with ftp) in sender file adapter.
Thanks
Sachin

Hi ,
The error is surely of the Path .
Just perform the following steps.
1. Logon to the FTP machine.
2. Go the Folder where the FTP is configured....(d:/ smflder/ FTPFolder/ Parent Dir/ Child Dir)
3. Now in communication channel if u have used the path say (Parent Dir/ Child Dir)
4. Then specify the Parent folder also in the channel for e.g. (FTPFolder/ Parent Dir/ Child Dir)
This must solve your problem
Regards,
Ashwin M
Mark the helpful answer

Problems to connect with my iPhone 5 to my wi-fi

Hi,
i have problems to connect to my wi-fi with my new iPhone 5.
I didn't have the problems before, with my 3GS.
What is the problem? Did i have to change something in my settings?

Does your iPhone see your Wi-Fi network and accept the network password, if you're using a password?
Is Wi-Fi grayed out on your iPad?
If it isn't grayed out, this Apple doc is a good place to start -> iOS: Troubleshooting Wi-Fi networks and connections

Applet security problems while connecting with database

i hav problem in the japplet connecting with sql database
it gives security access denied error while running program as my driver is jdbc:odbc:bridge driver
so for resolving this error how can i turn off security of applet and also which security permission to be change?
plz reply

baftos wrote:
Maybe I should question the need to access a local database on the client PC.
But anyway, the normal way to obtain security clearance is to use a signed applet.
Another possibility is to grant the applet all permissions by modifying the security policy file of each client to grant your applet 'all permissions'. Note that in this case you must have access to each and every client PC or ask them to do so before running the applet.Database access at client's machine is ridiculous. I doubt this is what OP wants.
@OP: request you to post the original security issue and the environment details.
Thanks,
Mrityunjoy

Facing problem in connection with OWB client

Dear All
Greetings!!!
Im new to Datawarehouse building. I have installed OWB R1 at my own pc.I am facing problems in connecting OWB client..What exactly to put in Host name and Oracle Service name. i am logging in with the same system/password with normal login. Please guide me to enter in the datawarehouse world..
Thanx and Regards
Nukesh Bhoyar
Mumbai(India)

Hi Nukesh
I know this doesn't really answer your question but Oracle have just made Release 2 of Warehouse Builder available and based on all of the info through this forum and other places, if I was you I would download R2 and install it instead of R1, as it is deemed to have way more functionality.
Cheers
M

Problem to connect with SMB

My mac worked fine till a few days ago
I restarted it and since then he won't let me to connect with SMB to specific server (Isilon)
when I'm trying to connect with smb to windows server I don't have any problem
does anyone have any idea how to fix it?

Correction - when changing the workgroup name, I have to change it to something altogether different, apply the changes, then change it back again and apply the changes. Simply retyping the name and applying this does not work.

Problem WRV200 Connect With WRT54G v.5

Similar Messages

Maybe you are looking for