Problem wth incomplete returns orders -  Shipp pt and route are greyed out

Hi
This is the problem with the incomplete return orders (v.02). All the subsequent documents are in complete process, but the returns order status is showing  open status. This is because the user tried to remove the delivery block in returns order using a tcode (customized) and after that the shipping point and route in the returns order are removed and the fields are greyed out. So we need to complete all those returns order either through updating the database tables, please let me know how to achieve this?
Thanks in advance
Kishore

Hi Kishore,
                As you might have shipping point and the route in the incompletion procedure for this return delivery type and these shipping point and the route are automatically determined, these fileds are greyed out. You have to remove these fileds in incompletion procedure by going to "SPRO-IMG-SHIPPING-BASIC SHIPPING FUNCTIONS-INCOPMLTION FOR DELIVERIES"(VUA2--TRANSACTION).
Or use seperate shipping conditions for the retunr process ,so that you can detemrine shipping point differently(You can assing some other shipping point as well in shipping point determination by entering Manual shipping point (OVL2).
Regards
Ram Pedarla

Similar Messages

  • I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

    I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
    I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
    Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
    Connection Bus : USB                                                               Write Status : Read/Write
    Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
    USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
    As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

  • I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

    I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

    My apologies. Your post jogged my little grey cells to the point that I did a few experiments. In essence, you are right. My plug-ins do not work with 8-bit greyscale images. I like to deliberately shoot B&W and have a Wratten #12 minus-blue filter on the lens--as I used to do with film cameras.
    The raw files ( Fujifilm's .RAF) were converted in Adobe CR by checking off "Convert to Grayscale" under the fourth tab. In the future, I will do the B&W conversion in Photoshop with either Nik or Topaz plug-ins.
    Thanks for your input!

  • I have purchased & downloaded Adobe 6 (standalone,not CC}  Panorama and HDR are greyed out and not useable?  Appreciate any words of wisdom

    i have purchased & downloaded Adobe 6 (standalone,not CC}  Panorama and HDR are greyed out and not useable?  Appreciate any words of wisdom

    Your parental controls are likely restricting you:  Settings>General>Restrictions, then toggle to "ALL" on shows/movies etc

  • ICloud and Twitter are greyed out in Systems.  Can't access them.

    iPod Touch   Model PC544LL   Version 5.1  30GB
    Why are my iCloud and Twitter icons greyed out in Systems?
    Found the answer. 

    A little more info is needed.  How are you trying to access iCloud (via contacts, calendar, mail app)?  Also check Settings>Restrictions.  Not sure if turning it on would cause this, but check to be sure its not turned on.

  • Distort and perspective are greyed out in photoshop cs2

    I have placed a photo in a layer and I want to use distort through Edit - Transform, but it is greyed out. I have checked the image I am using and it is saved in RGB 8-bit.
    I can scew and warp the picture but I cannot distort it.
    See attached image
    What is it I have to do to be able to distort this image that is placed into a layer so that it will fit over a template I am using?
    Thanks
    Nigelinspain

    Ok, I think I have sorted it. If I place the image into a new layer and then Rastorize the layer I can then go to Edit - Transform and the Distort and Perspective are now usable.
    Phew - that´s got that problem sorted out, now if I could only sort out the economy!

  • Macbook Air won't allow me to erase. Format and Name are greyed out.

    I'm looking to sell my original Macbook Air and after going through each step from the OS X Erase and Install tool from Apple Support, everything still remains greyed out, not allowing me to erase.  I've tried restarting with command, R, and I've also tried shutting down and starting up holding the down the option key.  Neither allows me to erase.  Any suggestions?

    Shut down the computer.
    Restart the computer and try again.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Best.

  • Calendar and contact options are greyed out

    Hi all,
    I wand to sync my contacts and calendar between my iPad1 and my Windows Laptop.
    After installing the icloud sync software, I was only able to check "favourites and photostream" to be synced. The fields mail, calendar and contacts are greyed out and not available to select.
    I have browsed through the Internet, de-installed that software piece and installed it again, not change.
    Passwaords have been corrected according to the iTune needs (8characters, and so on).
    I do not know what to do, any ideas?
    Thanks

    When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
    Richard

  • Forward and back buttons greyed out, no forward or back available in right click menu either

    After upgrading to the latest FF14 the forward and back buttons and menu versions of forward and back are greyed out.
    Tried the sqllite check and it says all my databases are fine. Tried safe mode, same thing. Tried a new profile, same thing.
    Any other suggestions?

    You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I can't print using airprint from my iPhone 4.  Everything with the phone and the printer and router are up to date.  I can print from my iPad 2 with no problems.  What's wrong with the iPhone 4?

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • MRP - Sales order and customer fields grey-out

    Hi there,
    The Sales order and customer fields are grey-out for all MRP generated production orders. Can the SAP programmers please get this fixed? It should either read in the sales order number and the customer number or allow user to type in the sales order, just like the manually created production order.
    cheers

    Hello Gordon,
    If production is make-to-order rather than make-to-stock, the MRP should read in the sales order number and the customer, since it is specific to the sales order. Even for make-to-stock production, where it cannot read in the specific sales order number, it should at least not grey out the field, don't you think so? By greying out the field, users are not allowed to type in the sales order number even when the production order directly relates to a particular sales order. As such, we are not able to link it back to the sales order where other info such as customer's purchase order, etc... can be found.
    Could you please advise alternative way of linking MRP generated production orders to the sales orders? thanks

  • After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

    After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

  • IWeb window won't load - and all menu options are greyed-out

    I've used iWeb before (with a web site set-up), but I tried to open it today and the iweb screen would not open. The program menubar loads, but almost everything,including New Page and New Site are greyed out.
    I checked my ME account and it is active and working.
    Not sure what the problem is here - any ideas?

    Hi, I had the same problem!
    After one evening of pulling my hair out, I tried the following:
    1. Located the 'domain' file (or package). In my case at /*user/Library/Application Support/iWeb.
    2. moved the domain file to the desktop (or somewhere else)
    3. Started iWeb. I got the warning that iWeb needed a domain file in order to operate, and I confirmed that I wanted the program to create a new one for me.
    4. iWeb started as normal, but with no contents. I closed iWeb.
    5. I ctrl-clicked the original domain file on my desktop, and selected 'show package contents'.
    6. I ctrl-clicked the new, empty domain file in the Application Support/iWeb directory, and selected 'show package contents'.
    7. I deleted everything in the new, empty domain package file.
    8. And finally copied the contents from the old (seemingly corrupt) package file into the new one.
    9. Hooooray! iWeb started with the old contents intact!

Maybe you are looking for