Problema al cargar/adjuntar archivos del escritorio

Hola,
Desde hace un par de semanas, el mac me da problemas para adjuntar o cargar archivos que estén en el escritorio.
Me pasa cuando tengo que adjuntar un archivo al email, cargar una imagen en photoshop y en cualquier aplicación en general que necesite cargar un archivo desde el escritorio.
Cuando lo hago, la ventana de carga de archivos se bloquea, el puntero del raton cambia a la rueda de colores girando, y el programa ya sea cualquier navegador, photoshop o aplicación web  se bloquea y tengo que forzar su salida.
A veces se me arregla sin más, pero vuelve a surgir en cualquier momento.
He probado a arrancar el Mac OS X en modo seguro, pero sigue dando el fallo.
He buscado por internet y le pasa a más gente, pero no he dado con la solución.
Un saludo y gracias.

I translate my problem to english:
Since a pair of weeks, my mac cause problems when attaching or loading files which are in desktop.
It occurs when I have to attach a file to a email, load an image to photoshop and in any case when I need to load a file from desktop.
When I do this, the window of loading files(the finder?) crashes, and the program (any browser, photoshop or web application) crashes and I have to force the program to quit.
Sometimes the problem is fixed without doing anything, but reappears at any time.
I tried to boot the Mac OS X in safe mode, but the failure continues.
I have searched the internet and it happens to most people, but I have not found the solution.

Similar Messages

  • Publicar página en businesscatalyst: Error al cargar el archivo index.css

    hola!
    Mi problema es que no me carga la página en businesscatalyst. me da el error "Error al cargar el archivo index.css", y no se como solucionarlo. Muchas gracias.

    This forum is only for discussions on the forums themselves. The Business Catalyst one is here:
    http://forums.adobe.com/community/business_catalyst
    And there is a forum in Spanish here:
    http://forums.adobe.com/community/international_forums/espanol?view=discussions

  • Problema al cargar la pagina

    Estoy tratando de entrar a la pagina del banco ciudad y me dice que hay problemas al cargar la pagina. Textualmente dice:
    La página no está redirigiendo adecuadamente
    Firefox ha detectado que el servidor está redirigiendo la solicitud a esta dirección de una manera en la que nunca terminará.
    Este problema a veces está causado por desactivar o rechazar
    la recepción de cookies.
    Muchas gracias
    Noelia

    Hola, podria estar afectado internamente, de ser esto deberia verificarlo soporte tecnico, por si acaso, repasa que las conexiones de la bateriano esten dobladas o sueltas.
    Espera igualmente mas respuestas que puedan aportar mas informacion.
    Saludos Cordiales,
    Alez Curquejo
    Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
    Es importante indicar que los foros complementan los recursos de los usuarios pero no reemplazan al Servicio Técnico Oficial de Lenovo, para ello puedes contactar en Página de Soporte Oficial de Lenovo

  • Despues de la actualizacion ya no puedo adjuntar archivos en mensajes mms

    hola despues de la actualizacion al sistema operativo ios 7.02 ya no puedo adjuntar archivos multimedia en los mensajes mms de mi iphone alguien podria ayudarme si tengo que configurar algo???

    hola despues de la actualizacion al sistema operativo ios 7.02 ya no puedo adjuntar archivos multimedia en los mensajes mms de mi iphone alguien podria ayudarme si tengo que configurar algo???

  • Mi ps touch pa iphone tiene un PROBLEMA para cargar la fotos de la biblioteca

    Mi ps touch pa iphone tiene un PROBLEMA para cargar la fotos de la biblioteca

    You will likely get better program help in a program forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • COPIAR ARCHIVOS DEL PC AL ICLOUD

    Hola!
    Me gustaría saber como puedo pasar una carpeta de archivos del ordenador al ipad, puesto que no sé como poder ponerlos en el icloud.
    Gracias

                No olvidar compartir la o las carpetas que desee se puedan acceder desde el WD TV Live. Por favor, una vez hagas todo, das el caso por cerrado (Accept as Solution), para que otros miembros del Foro se enteren que tuviste solución a tu inquietud y señala la respuesta que más te orientó. En caso contrario, regresa al Foro y comentas qué sucedió (Reply).  

  • Trato de actualizar a ios 6 desde iphone 3gs ios 3.1.3 y me dice que el archivo del firmware es incompatible que debo hacer

    trato de actualizar a ios 6 desde iphone 3gs ios 3.1.3 y me dice que el archivo del firmware es incompatible que debo hacer

    Eso casi siempre es un sintoma de un iphone que ha sido hackeado. Lo fue?

  • Problem with printing to a Dell Laser Printer

    Just switched to CS5 Indesign. Trying to print to a Dell laser 1720dn printer. The printer is returning am Error message;
    ERROR: undefined
    Offending Command    looks like 0e ligature
    STACK:
    17.9807
    -mark-
    -dictionary-
    INDesign CS4 had no problems and the page prints to an ink jet printer without any problems
    Any help would be appreciated.
    Mayavase

    Thanks for your reply.
    I should have mentioned I am using Windows XP.
    No, there are no eps graphics in the document.
    Photoshop CS5 prints with no problems. I did a work-around by making a PDF and printing from that.
    As I mentioned there was no problem printing from the CS4 version.
    This may be a similar problem to the TWAIN problem in CS4.
    Again Thanks,
    Justin Kerr

  • Problems installing Solaris 10 on Dell PowerEdge 800

    Hi,
    I am experiencing some trouble when I attempt to install Solaris 10 on a Dell PowerEdge 800. It is equipped with two RAID disks controlled by a Dell CERC SATA 1.5/6ch (according to the BIOS).
    The installation program reports that it cannot write to the disk. This happens when it is about to start installing files. Tried setting it to a single volume and disable RAID. Same thing. Read another article saying something about disabling IDE, well it doesn't seem to help ...
    Any hints?

    I have the same problem on a dell 750 with the SERC controller. I can add some more information but if you get a solution I would appreciate the detail.
    1) If I install Solaris via the SERC in RAID 1 mode then the alarm on the SERC goes off as soon as I start to write to the disk.
    2) I bypassed the SERC and installed on a single disk straight off the motherboard. Time the install crashed at the same point but this time the error message told me that the first available cylinder was number 3! Ah
    3) I reconnected the disk via the SERC, rebuilt the RAID array and made a mistake. I created a RAID 0 (striped) array and installed the software starting from cylinder 3. I got a complete solaris install that rebooted fine and is fully working.
    BUT I NEED A MIRRORED SYSTEM SO
    4) I rebuild the machine again this time RAID 1 and again the crash occured at exactly the same point i.e. as soo as I start to write to the disk.
    Whether or not DELL / Adaptec support Solaris should not be an issue. This is a BIOS configurable RAID controller that can be fully serviced (e.g. disks replaced) from the BIOS. The system sees the array as a disk via the controller and indeed it is seeing it.
    The SERCs own data configuration data should be on sectors which are not visible to solaris VIA the SERC so we shouldnt be able to damage them but I suspect that this may not be the case.
    I suspect that the answer is in the partition layout and who or what creates them (I dont mean the Solaris slices but the FDISK partitions)
    To make matters worse, since I need the machine working I went back to disks straight of the motherboard and configured again and used metadevices to set up a fully mirrored systemas I have done many times before on sparc (but never on Solaris x86)
    This worked fine but I thought that I would test bootability in the event of disk failure. There isnt any!
    if disk 1 fails then the motherboard wont accept disk 2 unless you swap the cables and move it do disk 1 and by then the boot sectors are wrong for the address of the device. I can probably solve this by building both disks in slot one but who wants a mirrored server that you have to open up and move a cable when the disk fails. I think I may have to ditch SATA and go back to SCSI !

  • Scanning Problem with Mavericks, CS3, and Dell 2155cn

    New MB Pro running Mavericks.  Adobe CS3 loaded.  Acrobat Pro will print to network Dell 2155CN, but will not scan.  Same installation on older MBP running Lion scans from Acrobat with no problem.  Does Mavericks have a problem with the Dell driver?S

    Might be the driver. I don't see a Mavericks compatible driver > http://ftp.dell.com/Pages/Drivers/dell-2155cn-cdn.html
    It just says Mac OS X. That's rather vague.
    Try this workaround.
    Image Capture can scan for you. It's in your Applications folder.
    Mac Basics: Using a scanner

  • Any others having problem with ipod on a Dell

    I have a mini and nano ipod. When I plug it in, it say's "UBS device unreconized". I know the port is good as I use my camera cable on it fine. We've used one of my neighbors computers (not a Dell), and I can load itunes and not get the message. We also have an old compaq computer that doesn't have internet service and am able to charge the shuffle on it. I tried my dad's newer computer (also a Dell), and have the same problem that it says "UBS unreconized" Neither Dell will even charge the shuffle or nano....is there anything specific with Dell computers that might be causing this? Very frustarted!! Thanks

    We have a Dell computer. I bought my husband a Nano for Christmas. Since February, we've had problems, and have had to replace it multiple times. Apple first said it was a bad USB port. Replaced that and the problem continues. Now Apple says it must be a bad motherboard or power supply. The computer is only about a year old, and I have no other problems. The last one was only plugged into the new USB port one time (to initially load it), and after that was only plugged into the Apple wall charger, and it still died a month later. According to the guys at the Genius Bar, it could have happened from only charging it that one time on the computer, even though it didn't die for another month.
    Whatever the problem is, it completely hoses the Nano.

  • Problemas con color de archivos JPG en Fireworks

    Buenos días.
    Tengo el siguiente problema. Habitualmente trabajo con Adobe Fireworks CS5 para hacer pequeños retoques o cambios en imagenes. Me he dado cuenta de que al abrir cualquier JPG me cambia el color del mismo, los tonos o algo. Si abro el mismo JPG con Photoshop o cualquier otro visor de imagenes me lo abre bien. Pongo foto para que veais:
    Adjunto una imagen para que veais. La de la izquiera es la del Fireworks y la de la derecha, con el color correcto, con el visor de windows.
    A ver si alguien sabe que puedo hacer por que he buscado, he reinstalado y no hay manera...
    Lo que si pasa es que si copio la imagen  desde photoshop a fireworks me la pega correctamente, pero si tengo que abrir los 2 programas para cada imagen estoy frito.
    Gracias.

    Gracias por tu respuesta.
    En Ajustes de color, como espacio de trabajo RGB debes utilizar un espacio de color neutro, equilibrado que no sea de dispositivo.
    En tu caso el perfil calibrado del monitor, debe utilizarse por Windows para mostrar en el monitor pero NO como espacio de trabajo RGB. Yo utilizo el Adobe RGB (a veces empleo sRGB, por que las imágenes sin perfil se han creado en ese entorno, y las que incluyen un perfil, no emplean el del espacio de trabajo), como muestra la imagen para el monitor SI utilizo el creado al calibrar.
    Sobre el color que indicas es un gris pero no neutro, sino ligeramente azulado (te pedia los valores RGB, no los hexadecimales para no tener que abrir el Selector. En RGB 140/162/173 claramente indica dominante azul (valor mas alto))
    El espacio de color de la foto, U.S. Web Coated, es el de origen o al que convierte por defecto? Yo me refiero al "Source Space", si es así, la imagen está en CMYK, si trabajas para la web, deberías usar o convertir las imágenes a algún RGB antes que nada.
    El monitor lo has calibrado con algún hardware? (Ten en cuenta que si además lo está utilizando como espacio de trabajo en Photoshop culaquier desviación de la neutralidad se magnifica).
    Con los ajustes y esta forma de trabajar que utilizo no encuentro grandes discrepancias. En Fireworks, poco o nada puedes hacer por carecer de gestión de color incluso la CS6.
    Por otro lado parece que su desarrollo futuro se ha parado.

  • Problems w/ MacBook Pro and Dell 2155 cdn

    I am having issues with a mid-2010 MacBook Pro (10.8.5) and a networked Dell 2155cdn printer/photocopier/fax/scanner.  Driver is  Dell 2155cdn Color MFP v1.5 downloaded from Dell support (also tried v1.4).
    Connectivity is fine, not a network issue. I can print a test page. When I print to this printer– from any application, say TextEdit– I get the usual osx dialog box. However, when I click "Print" from said dialog box, instead of the print job going to the queue, I get another dialog box to set up for sending a fax.
    I should mention that I have six other os-x boxes (10.7.5  to 10.9.1)– Mac Pros, IMacs a mini,and 2 Airs– in the house that are connected to this printer, either via a "shared printer" or networked directly to the printer, and I have never had this particular problem with any of these machines. (I have had lots of other issues with this printer and would never recommend it for use w/ Macs.) I just want a click on "print" to print my job, pretty straight forward. I will never send a fax.
    Given the above, I am thinking the problem lies hidden somewhere on my MacBook Pro. Can anybody set me straight here?

    Hello WxGuy,
    It may help to reset the printing system and readd the printer that your MacBook Pro seems to think is a fax machine.
    Troubleshooting printer issues in OS X
    http://support.apple.com/en-us/TS3147
    Cheers,
    Allen

  • Installation Problem - Skype for Desktop on Dell Venue Pro 8

    I have a new Dell Venue Pro 8.  It had the modern Skype app installed out of the factory, but clicking on it made me download the Skype for desktop app.  It downloads fine (in looking through the forums, I saw that others had problems with this, but it was fine for me).  The problem comes when it's installing.  Skype brings up the "Installing Skype" window.  The problem is that it takes up the whole screen.  I can do what I need to with the "Select your language" drop-down menu, but there is nothing that lets me go to the next screen.  I see no "Next" or "OK" or anything like that to use to continue the installation process.  I cannot resize the window.  Maximize and minimize are the only options.  "Move" and "resize" are grayed out. Thank you for any ideas!

    Try to install the currently latest Skype 7.7.0.102 version using this installer: http://download.skype.com/msi/SkypeSetup_7.7.0.102.msi

  • Problems with MBP late 2009 + Dell U2711 + DVI Dual-Link

    Hi!
    I'm new to Apple Communities. I've been using for quite a long time my MBP with my Dell U2711 monitor. Sometimes it works perfect. But other times, just after bootup or reasume the display doesn't work properly.
    Some times it doesn't detect the signal of the MBP and doesn't start.
    Other times it displays the right image but with something like "noise" in every color.
    The only solution I found is to turn off and on the display or if it doesn't start, forcing it touching the menu button to start up. If it appears noise and I just change the source and put it back again it works fine.
    It has only happened me with this computer. I have also used it with a custom made computer with a GTX280 and never had a problem with it.
    I tried to boot up with the 2 different graphics cards my MBP has, and with both I have the problem. I even had the problem using the "normal" DVI adapter. I suppose it must be something of the computer firmware. Some times, if I restart the computer using only the U2711 display. The bootup logo and loading is displayed fine. But when it displays the login window the noise starts.
    I've always had this problem. It isn't something that started happening one day. I even reinstalled Mac OS X.
    I'ts really strange and I found nobody who has the same problem. I hope someone has a solution.
    If someone doesn't understand what I call "noise", please, tell me and I will post a photo of it.
    Thanks in advance (and sorry for my English)

    Double posting. Everyone, ignore this here and follow that one instead.

Maybe you are looking for

  • Maps3.0 on 5800 won't go online

    I've installed maps 3.0 (3.0.1 really) on my 5800. Worked fine except it won't go online, and unlike some people it seems I definitely want it to go online! Basically when I tap on the "go online" entry, on the tools menu, nothing happens! If I selec

  • Case when Query in SSRS

    I just want to post another new question based on last week's thread: Visakh16 provided me answer to use "CASE When" to handling different regions (see the Select statement below). My new question is:  I do need to add a new condition for transaction

  • How to float a landing page to capture email address, only shown once per visitor to the site, and not on return visits?

    I would like to float a landing page to capture email addresses, that is only shown once per visitor to the site, and not on return visits OR after they submit their email not to be asked again. thanks guys!

  • Oracle Database Redaction in a web based app (or OBIEE)

    Has anyone prototyped an implementation of transparent database redaction within a web based application?  I'm just taking a look at the redaction capabilities built into 12c and was hoping to see an example for how a person might be able to leverage

  • Problem opening projects iMovie 13

    I just updated to Yosemite and decided to update to iMovie 13 from 11 as well ... big mistake. Because of the large size of my iMovie projects I kept them on my external hd, this used to work perfectly, whenever I had my external HD connected it woul