Problema al imprimir PDFs usando HP Color LaserJet CP2025n

Buenas tardes,
Me gustaría solucionar un problema que ha estado presentándose actualmente. Resulta que he estado imprimiendo PDFs y algunos son impresos de manera correcta pero otros son impresos sin ninguna coherencia, las líneas estan completamente al revés horizontalmente y verticalmente. Espero poder darme a entender, si no anexo una imagen. He buscado este error por algunos sitios, pero no he podido encontrar solución, y necesito ponerle solución a este problema cuanto antes.
Espero puedan ayudarme.

Sistema operativo?
Versión de Acrobat?
Desde que aplicación falla la impresión, Acrobat Reader? otra?
En que aplicación se han generado los PDFs? El mismo archivo falla siempre?
Has probado a intentar imprimir sólo una pagina?
Has probado en opciones avanzadas a imprimir como gráfico?
Qué cantidad de memoria tiene la impresora, tamaño del archivo PDF?
Has probado a imprimir en otro equipo/impresora?
En esta página:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=es&cc=es&prodNameI d=3673584&prodTypeId=18972&prodSeriesId=3673580&swLang=35&taskId=135&swEnvOID=4063
tienes controladores actualizados apar tu impresora, si despues de instalados sigues teniendo problemas te aconsejo que también hables con HP, porque salvo un problema extraño en un PDF, se debería poder imprimir o salir impreso lo que ves en pantalla, pero sin más datos (alguno al menos) no puedo ayudarte más.

Similar Messages

Hp Color LaserJet CP2025n printing a yellow band down the right hand side,

I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way down the right hand side of the page, any ideas or suggestions much appriciated.

@T4011
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Trying to print to Color Laserjet CP2025n from OS X Mavericks on a Mac Pro over the network...

Basically, the configuration and drive status all seem OK. But when I try to print something from Adobe Reader, nothing happens after I click print other than the dialog dissappearing. There are no indications of error either. And when I bring up the printer queue, it is completely empty, as if the document was not even sent to it.
I am seeing HP Color Laserjet CP2025n (F4F285) in the Printer selection, as well as in the System Preferences. And from System Preferences, it shows up as "Idle, last used" with a green dot. I have attached full System Diagnostics, Bluetooth Diagnostics (although, I believe this is network'd over the LAN), and the System Report of my Mac Pro. You can see these @
https://drive.google.com/folderview?id=0B2wbE3EVNff3WUNQR2RPTjRmejA&usp=sharing
The other week it printed fine, but it I think I recall seeing two options in the Printer selection box. Now it only shows one, but again, the drivers indicate that everything is alright. I can even view the amount of ink remaining?

Hi @jahburnit
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Color LaserJet CP2025 Printer series support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing PDF to HP Color Laserjet 2550Ln result in Red images

When printing PDF documents to my networked HP Color LaserJet 2550Ln, usually the embedded images are covered in a red hue. This was already the case with MacOSX 10.4, but still continues with Leopard 10.5.2, using Bonjour. Printing the same document (also using Bonjour) via a windows machine (Windows XP SP2) results in a perfect copy.
Anyone an idea of the cause of this behaviour?
Regards,
Gerard

This works for me, because I'm tired of waiting for Adobe to find solutions: open your pdf document with Preview and print from there. It will print cleaner and faster than any Adobe application.

Printing problems (PDF files-HP Color Laserjet 1518ni: return the printer?

Hi everyone, I recently switched platforms and became a Mac user and had to buy a new
printer because my old HP deskjet is not compatible with my computer. So, I bought an HP
Color Laser printer, supposedly Mac compatible, but every time I try to print a PDF file it only
prints the first page. And then stops printing. I spent hours with the HP customer service, reinstalled
the driver, changed configurations, but it still does the same thing. The customer service representative could not solve the problem. I was wondering if there is any one else who had a similar issue with printing? Is it Mac OS X 10.5.5 that causes the problem? I am about to return the laser printer; it would be so helpful if I got some feedback. If it is a printer issue, then, which printer would you folks recommend that is not too expensive but efficient (I use the printer a lot and need an efficient one) and a printing speed of around 12-20ppm that actually does work with the Mac?
Thanks in advance!
Asli

Asli Igsiz wrote:
Thank you for calling my attention to the Adobe issue. I did try and print a PDF file with Preview and it worked! How was the issue solved with Adobe 7? Maybe Adobe pro7 also similar bug issues; is it to Adobe that I should be reporting this or to Apple?
Thanks again.
It's definitely an Adobe problem. The only solution I ever saw was either to print from Preview or to use later versions of Adobe Reader 8 or any version of Reader 9. I asked Adobe support what the problem was. I never got a reply.
You should know that Preview (and any other application which reads PDFs using Apple's PDF engine) has a problem with displaying Times Roman Italic, and only Times Roman Italic when launched under OS X 10.5.5. All other fonts appear to work normally; at least I haven't found one which has a problem, including other Times Roman font faces, including Times Roman Bold Italic. Preview seems to print properly, but the on-screen display has problems. The same files display properly with apps which don't use Apple's PDF engine, and also with apps which use Apple's PDF engine under versions of the OS earlier than 10.5.5, going back to at least 9.2.1. Apple is aware of the problem.
There seems to be at least two problems with the main PDF engines for OS X, Apple's and Adobe's.

Problema al imprimir PDFs

Buenos dias,
     Estoy teniendo problemas de lentitud a la hora de imprimir algunos PDFs, el documento al enviarlo a la impresora en el buffer llega ha alcanzar un tamaño de 130MB y tarda bastante tiempo en comenzar la impresion. El tamaño del archivo PDF es de 8MB aproximadamente
Incluso se demora varios segundos entre cada pagina, cuando con otros programas como Microsoft Office Word no ocurre e imprime con normalidad.
     He reinstalado Adobe varias veces incluso con distintas versiones y ocurre exactamente lo mismo.

Te agradeceriamos facilistases una información más detallada sobre:
Impresora?
     (algunos datos, como memoria, lenguaje,...)
Sistema operativo?
Memoria RAM en el ordenador?
Algunos PDF creados en qué aplicación?
Se envian a imprimir desde qué aplicación?
A qué Adobe te refieres?
(Adobe es una marca, un fabricante de software como Microsoft o Apple )
Supongo que te refieres a Adobe READER, la versión gratuita de Acrobat.

Problems with OS X 10.4.4 & HP Color Laserjet

I have been getting a "49 2FC8 Printer Error" message from our HP Color Laserjet 4600dn in the past month. The error locks up the printer. It occurs from any computer on the network. It occurs when I plug a Mac directly into the Jetdirect jack on the printer or when I go through the network. It occurs with many types of documents: .pdf,.doc,.indd, etc.
I've probably spent six hours on the phone with HP. The end result of all the testing and isolating is that there may be a bug in their firmware for the printer.
Is anyone else having a problem like this with their HP color Laserjet? If so, have you resolved it?
Thanks for any help. It would be good to know if you've had the problem even if you have not resolved it either.
Thanks,
Rich
G5 Dual 2.0 Mac OS X (10.4.3)
G5 Dual 2.0 Mac OS X (10.4.4)

Turned out to be a defective HP board in the printer. I only found this out after dozens of hours on the phone with HP support doing lots of procedures to narrow down the problem.
Now fixed and working fine.

Color LaserJet HP 2550

My system is a MacPro Mid 2010 running Mac OS X Lion 10.7.5. I am having problems with printing on my hp color laserjet 2550 printer. It is connected via a USB connection on one of the front ports. The issue is that I must power cycle the printer to submit a print job successfully to the printer. Otherwise, I get a message stating "busy waiting for the printer" when submitted the second print job even though the print queue shows the state of the printer to be in a "Printer Ready" state. So, it simply cannot mantain a proper connection with the printer. When the data successfully gets to the printer, it prints as expected.
I am currently using the Apple supplied HP Printer Software Update version 2.11. The installed printer driver is the "HP color LaserJet 2550 series" version 18.4. The problems have persisted no matter how many updates Apple has provided. HP's support basically says that it is supported by Apple and it should work with the drivers that Apple supplies.
Any suggestions would be greatly appreciated. I've tried many of the suggestions on this forum, but none have worked. I noticed that one person simply bought a new printer.

I managed to get some success by rebuilding as described in another posting:
Dominique Simon
Re: HP Laserjet 2550L prints one job then hangs
Jun 15, 2012 2:13 AM (in response to Fami R.)
I had this issue too with my HP 2550. No more printing after the first printjob possible
I managed to get the printer working as expected by removing the hp_io_enabler kext.
sudo -s
mkdir /Valhalla
mv /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext /Valhalla
exit
Wait for the systemcaches to be rebuilt and reboot. You can see if the caches are being rebuilt by opening the Activity Tool, the process is named kextcache.
You need to have the Valhalla Folder in root of course.
Not very mac-like, but it works

HP Color Laserjet 1600 cannot print in color with Pages 09

Hi, everybody!
I got a huge problem for me that the HP Color Laserjet 1600 cannot print in color with Pages 09 after I upgrade to 10.6.1. It worked very well in 10.5.8. Since there is no official driver from HP website for 1600, so I used foomatic/foo2hp as the driver.
It is very strange that I can print in color with Safari and Preview in 10.6.1, but cannot with Pages 09. When I print with Pages 09, it always shows that the print job was completed but my printer was nothing happened.
I just re-install the 10.6 OS "complete new", install the printer driver with the instructions on this forum.
It would be high appreciated if somebody can help me on it!

Why doesn't MAC just give us the driver for the HP Color Laserjet 1600? It's one of the most popular home based business laserjets. It's the one I use and a lot of other people in business use it so I'm at a loss as to why they don't.
I bought my MAC Pro tower for video editing and I can't print from it and have had to reinstall the OS on it once already because Safari wouldn't open a window. So much for the MAc advertising statement of "We're so much easier to use."
After spending close to $10,000 on MAC equipment, Tower, Laptop, Monitor, etc. if they think I'm going to spend more for a new printer just because I can't get a driver to print they're thinking wrong. I going to re-think my new cell phone purchase too. Has anyone had software issuses with their phones before I go out and buy one?

Problem printing pdfs exported from IDCS3 to hp color laserjet 2550L

Since upgradingn to IDCS3, whenever I print a pdf exported from ID to my hp color laserjet 2550L, the graphics print with a red overlay and other colors change as well (black type prints brown, blue prints maroon). If I print the file to a .ps file, then distill it, I don't have the problem. If possible, I prefer to export because it's quicker. Is there a fix to this?
Thanks in advance!

Check the HP site for a newer driver for your printer.

HP 2605dn Color Laserjet firmware problem.... wny suggestions on what to try next?

Thanks in advance for any suggestions.
I installed the firmware upgrade on my color laserjet model 2605dn to resolve the red background printing problem with pdf documents. The install utility appeared to install it and then I got the little smiley face that I understood meant that it went the way it was supposed to. However, now the printer no longer displays lights or anything on the lcd display when powered up. WHen first turned on, it goes through at least part of the start-up check and then seems to hand and stop. when I turn it back off with the switch on the back, there is an audible click from somewhere inside as it powers down.
sooo.... am I correct in thinking that the firmware may be corrupted and that without the ability to reset or reload from the console, combined with no communcation with computer or network, that it's doa? Or does someone hav a suggestion on how to address? I'm not very knowledgable about printers, but am no stranger to electronics, instruments, etc... in other words, I have no clue what to try next, but am comfortable trying about anything...
Best Regards

I wonder whether anyone can give me advice on the above problem, thanks. Have upgraded to Firefox 9.

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

HP Color LaserJet CM2320fxi MFP - Full Duplex Problem

Hello!
I've got LaserJet CM232 and Win7 (x64). My problem is that when I'm printing for example 4 pages of a document it's printing only in full duplex, so 2 pages printed on both sides. I can't find where can I fix this duplex problem, I'd like to choose manually if it will be printing in full duplex or not. Help me find a solution, please.
Second problem refers to the time of printing. When I print something I have to wait several minutes to print it. Is that a RAM problem? More RAM memory will resolve this problem?
Thanks a lot for your replies! I'd really appreciate any help!
Best regards,
Kuba
Sorry for my English.

Hi Leela,
You may get the details from below HP link
http://h22168.www2.hp.com/us/en/partners/sap/drivers-for-sap-printing.aspx
HP Color LaserJet CM2320n
4.5A & higher
ZHPLJCM1
Hope this helps.
Regards,
Deepak Kori

HP Color LaserJet 5550 and Tiger (10.4.11) Driver Problem

I have recently acquired a Color LaserJet 5550hdn. I have updated all drivers and firmware available from the HP Website (Printer Driver, 5550 firmware and Jetdirect 610n firmware). The printer has been factory reset/cold reset etc. to purge any previous custom settings. I am using a PowerMac G4 Quicksilver (933mhz) and Mac OS X Tiger (10.4.11). I have made some test prints from both Preview and iPhoto and all have been dark and muddy with respect to colors. I have printed the same images from my wife's PC with HP's PCL 6 Driver for Windows XP and achieve satisfactory results with respect to color (that is to say, without fooling with any color settings in the driver, the image is at least within 10% of the color gamut compared to the screen image). Setting up the printer with the HP Postscript Driver for XP yields similar results as the Mac, dark and muddy colors. So is this a problem with the HP Postscript Driver? Is this a Mac OS X Tiger problem? Do users have color problems with the printer running the Leopard driver?
I previously owned a HP Color LaserJet 8550 (utilizing the same HP Driver for Mac OS X that the 5550 uses) and had default images (no fooling with any color settings in the driver) that were acceptable, again within 10% or less of the screen image color gamut.
I have also downloaded HP's ICC color profiles (CMYK and sRGB) and put them in library/printers/hp/profiles.
With respect to the driver itself, there are two areas in the print dialogue box which seem to have a bearing on color. One is Colorsync and the other is Color Options. Colorsync has two choices ('Standard' and 'In Printer') and I chose 'In Printer' to I assume bypass any Colorsync Conversion. When 'Standard' is chosen the print summary shows the HP Color LaserJet CMYK profile being used. There seems to be no way of changing the default setting in the Colorsync Utility to HP Color LaserJet sRGB. Not sure if it matters as the output for both 'Standard' and 'In Printer' seem to yield the same results. The options under 'Color Options" in the driver under the 'Show Advanced Options' have choices (Basic, Text, Graphics, Photographs, Advanced) and I have played with these to some extent. Although they seem to have some effect on the image, the print is still dark and muddy with respect to colors.
On a final note I have tried a 'GutenPrint' driver to see if it would yield different results.....there was not one for the 5550 so I used a driver for the Color LaserJet 5500......it would only print in grayscale....the resulting image did not look very promising even if it had printed in color.
Insights on any of the above from the community here would be most helpful!
Thanks,
-Ray

This is an update to my own post above. I downloaded the Mac OS 9 driver (yes OS 9!, but the QuickSilver is Dual Boot) for the Color LaerJet 5550 and printed (no changes to any of the driver settings) the same image (photo) as I used in Mac OS X. The image was still dark but not as poor from Mac OS X 10.4.11 (Tiger). Although I prefer not to use color management, I used the Colorsync tab in the driver and chose to match to Colorsync with a generic sRGB output profile (no other settings were changed in the HP color options tab). The resulting image was +/- 5% within the color gamut of the screen image (yeah!!!) In Tiger the options under the Colorsync tab in the driver are 'Standard' or 'In Device' and regardless of the choice, the print result is the same, very dark and muted colors. There is no option for sRGB and if set to 'Standard' the print summary always shows a CMYK profile being utilized. Given that the HP Color LaserJet 5550 is an sRGB printer as per HP, perhaps that is a problem? I would assume the 'In Device' option would bypass Colorsync (since there seems to be no other way to turn it off) and use sRGB, but that does not seem to make a difference in the image being printed.
My good success with an OS 9 driver leads me to believe I have a driver problem in Tiger. However, I have no problems with other printers (HP All in One, DesignJet Color Plotter and wide format Epson inkjet....all of which are older) with respect to poor color output. Given this is a current model in the HP line-up and I believe in service during Mac OS X Tiger, it seems hard to fathom other users do/did not experience a problem.
Again, do Leopard users have a problem with color issues on this printer with default driver settings? Does anyone have driver settings/other insights they could share with respect to Tiger to at least get the print image somewaht close to the screen image? As it stands now, regardless of settings, the printed image is dark with muted colors.
Thnaks to anyone who can respond, even if it is to say they have no problems in Leopard/Snow Leopard as I am upgrading to a new Mac soon.
-Ray

Problema al imprimir PDFs usando HP Color LaserJet CP2025n

Similar Messages

Maybe you are looking for