Problema con el dashboard del mac pro

Estimados de como Solucionar el Problema siguiente: CUANDO abro el dashboard del mac pro me Dirige al Sitio twitter.com / i / jot anotar?

Respondí a usted aquí > https://discussions.apple.com/message/26048896#26048896
Por favor, no iniciar temas duplicados

Similar Messages

I have problem with starting up my Mac Pro ?

Dear ,
I'have a problem with starting up my Mac Pro , please advice me how to start it

This may help.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Problem on my early 2008 Mac Pro

I had this problem with my early 2008 Mac Pro which started last week.
Some background; I'm using 8GB RAMs, using Snow Leopard and bootcamp Windows 7 and 3 days before the start of the problem, I had replaced the original 320GB HDD for 640GB HDD and reinstalled both OSes.
While I was playing some videos in Windows 7 last week, it displayed the blue screen with memory dump message and restarted on its own. Thereafter, I was unable to load Windows 7 and SL respectively, both hung before they can be loaded. In SL, I noticed that there were some faint red dots in the Apple logo and subsequently, the entire screen started to flicker with some random black and white strips. In Windows 7, it frozen at the Windows logo with a 640x480 resolution. My default resolution was 1920x1200. However, I managed to loaded into the safe mode of Windows and extracted my work.
I tried to re-install SL and it hung again at the Apple logo followed by the flickering.
I sent it to my local service centre and the technician removed my video card, RAMs and memory risers and cleaned the contact, ran the stress test overnight, AHT3A152 and ASD3S123 tests and concluded that he found no issues with the hardwares and the problem did not occur again.
The Mac Pro was sent back to me today and earlier, I started up with no problem and decided to remove the Windows partition and I restarted it again to confirm everything was ok. However, at the next startup, the problem re-surfaced and I could no longer start up my Mac Pro in SL.
I tried to swopped back the original 320GB HDD, but the problem still persists. Before I send back my Mac Pro to the service centre tomorrow, I would like to have some 2nd opinions. Based on my description, what is the likely cause of this problem, is the newly replaced 640GB be the root cause?

Do you keep Windows on its own hard drive?
I would have kept the 320GB while using Windows WD Lifeguard to test, zero, run extended tests and slow long format of the new WD 640. Then just cloned system to new drive.
Casper 6.0 seems to be great utility if you want to avoid reinstalling 7, though I've found 7 to be fast and easy to install even with dozens of programs to add.
Are you using the current / latest graphic driver for 7? I don't notice you even list which card.
RAM - there is no perfect test, AHT finds some while Memtest takes time and may find others.
Windows may be more sensitive to weak hard drive sectors and memory than Mac OS or than HFS+.
Do you have any 3rd party devices? PCIe? Cables etc?
And you can't boot off Windows 7 DVD or Safe Mode?
Windows should automatically offer to boot in Safe Mode.
Also, try restore from last good restore point.

Hello . I hope to get a solution to my problem: ( I bought a laptop Mac Pro, a user But the seller was not the Secretary Laptop after arriving I've worked for almost an hour When connected to electricity Nour appears very faint, I do not see it quickly ht

Hello
. I hope to get a solution to my problem: (
I bought a laptop Mac Pro, a user
But the seller was not the Secretary :" ( !!
Laptop after arriving I've worked for almost an hour
* When connected to electricity
Nour appears very faint, I do not see it quickly
http://www.3rabart.com/up/download.php?img=38472
When separated from the energy, light shows intermittently and then disappears fast
http://www.3rabart.com/up/download.php?img=38473
I need urgent help please.
Thank you

Please ، How Email for a company ? I want to communicate with them about my problem "(

Problema con il download delle applicazioni

Proprio oggi ho riscontrato un problema con il download della app dal mio iPhone 4s. Le applicazioni vengono scaricate ma quando poi mi appaiono sul dekstop del telefono rimangono in attesa.Se poi invece attacco l'iPhone al pc ed effettuo da lì il download tutto avviene normalmente e mi ritrovo poi l'applicazione che volevo scaricata sul telefono. Come mai?non mi era mai successo!!!

Ciao mi succede la stessa cosa tua anche a me. Invece con il 3G o collegandolo a ITunes si scaricano e aggiornano.
Se sai qualcosa fammi sapere
grazie mille
Ho anch'io un iPhone 4S con iOS 6.0.1

Tengo problemas con las aplicaciones del ipod touch 4g. NO las puedo ABRIR

Tengo problemas con las aplicaciones del ipod touch 4g. NO las puedo ABRIR

Me no speak spanish! But I is learning at school!

Problema con la sincronizzazione delle playlist iOs 7

Subito dopo l' aggiornamento di iOs 7, quando sincronizzo l'iPhone 5 all' iMac, le playlist sull'iPhone non vengono aggiornate.
Ovvero, se cerco la canzone aggiunta di recente nella libreria dell' iPhone la trovo, ma nella playlist automatica delle aggiunte di recente, no.
da itunes su mac, andando nel pannello di tutti i file presenti nell'iphone, le playlist risultano aggiornate.
Nel caso dell'iPhone 4s, problema leggermente diverso, sincronizza le canzoni, ma nell'eseguire una canzone, su iphone, si esegue quella sotto.

Hola,
Yo tuve el mismo problema con mi iPhone cuando quise instalar la versión 7.1.2 estando conectado desde iTunes de mierda. Estoy a las puteadas con esta basura

Problemi con la tastiera del mio MacBook

ciao a tutti , mi chiamo Paolo, mi è successa una cosa strana con la tastiera del mio Mac, purtroppo non risponde più ai comandi, quindi alla pagina iniziale non riesco a digitare username e pasw. Che fare ?
grazie.

buongiorno , ho risolto il problema disattivando
FILEVAULT GRAZIE GRAZIE

Problem with Quadro4000 in a Mac Pro (Mid 2009)

Does anyone has a problem with the Nvidia Quadro 4000 on his Mac Pro?

I have a major problem, it can't boot to start up the computer, I must to hold the shift button to open and when it opens it sticks and the colors of the wallpaper is not good. Also I have a raid card. The apple service told me that the problem is the graphic card and must be replaced but I am not sure about it, unfortunately I don't have the first card to be sure.
Do you know what the follow message means?
Interval Since Last Panic Report: 3378 sec
Panics Since Last Report:          2
Anonymous UUID:                    109D6AB4-796F-DAB1-788B-3CEBA562D0BE
Thu Sep 19 19:20:19 2013
panic(cpu 0 caller 0xffffff8019ab8945): Kernel trap at 0xffffff7f9b214d66, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008c, CR3: 0x000000000e72a000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000006, RCX: 0x0000000000000005, RDX: 0x0000000000003c00
RSP: 0xffffff81eb423280, RBP: 0xffffff81eb423280, RSI: 0x0000000000000005, RDI: 0xffffff803a7d1400
R8: 0x0000000000000000, R9: 0xffffff803d4facb8, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000004, R13: 0xffffff81ba18f000, R14: 0xffffff81ba1a2938, R15: 0xffffff803a7d1400
RFL: 0x0000000000010206, RIP: 0xffffff7f9b214d66, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008c, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb422f20 : 0xffffff8019a1d636
0xffffff81eb422f90 : 0xffffff8019ab8945
0xffffff81eb423160 : 0xffffff8019acebfd
0xffffff81eb423180 : 0xffffff7f9b214d66
0xffffff81eb423280 : 0xffffff7f9b1f6cec
0xffffff81eb4232d0 : 0xffffff7f9b2252ff
0xffffff81eb423700 : 0xffffff7f9b1d5c80
0xffffff81eb423730 : 0xffffff7f9b2291dd
0xffffff81eb4237b0 : 0xffffff7f9b210460
0xffffff81eb423810 : 0xffffff7f9b210d41
0xffffff81eb423860 : 0xffffff7f9b211294
0xffffff81eb4238d0 : 0xffffff7f9b211a53
0xffffff81eb423910 : 0xffffff7f9b1dcedf
0xffffff81eb423a90 : 0xffffff7f9b20df8f
0xffffff81eb423b50 : 0xffffff7f9b1db978
0xffffff81eb423ba0 : 0xffffff8019e6f789
0xffffff81eb423bc0 : 0xffffff8019e70d30
0xffffff81eb423c20 : 0xffffff8019e6e74f
0xffffff81eb423d70 : 0xffffff8019a98c21
0xffffff81eb423e80 : 0xffffff8019a20b4d
0xffffff81eb423eb0 : 0xffffff8019a10448
0xffffff81eb423f00 : 0xffffff8019a1961b
0xffffff81eb423f70 : 0xffffff8019aa6546
0xffffff81eb423fb0 : 0xffffff8019acf473
     Kernel Extensions in backtrace:
        com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7f9b1c90 00->0xffffff7f9b296fff
           dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f9a1 79000
           dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f9a165000
           dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f9a0df000
           dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f9a122000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12F37
Kernel version:
Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
Kernel slide:     0x0000000019800000
Kernel text base: 0xffffff8019a00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 213721035844
last loaded kext at 35243841547: com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4 (addr 0xffffff7f9b9f9000, size 24576)
last unloaded kext at 96410920956: com.apple.driver.AppleUSBXHCI     630.4.5 (addr 0xffffff7f9aa9b000, size 118784)
loaded kexts:
com.nvidia.CUDA     1.1.0
com.vmware.kext.vmnet     3.0.0
com.vmware.kext.vmioplug     3.0.0
com.vmware.kext.vmci     3.0.0
com.vmware.kext.vmx86     3.0.0
com.apple.driver.AppleBluetoothMultitouch     75.19
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.iokit.IOBluetoothSerialManager     4.1.7f2
com.apple.driver.AudioAUUC     1.60
com.apple.driver.AppleTyMCEDriver     1.0.2d2
com.apple.driver.AGPM     100.13.12
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.filesystems.autofs     3.0
com.apple.driver.AppleMikeyHIDDriver     124
com.apple.driver.AppleHDA     2.4.7fc2
com.apple.driver.AppleUpstreamUserClient     3.5.12
com.apple.driver.AppleMCCSControl     1.1.11
com.apple.GeForce     8.1.6
com.apple.driver.AppleMikeyDriver     2.4.7fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.1.7f2
com.apple.driver.AppleLPC     1.6.3
com.apple.driver.AppleSMBusPCI     1.0.11d1
com.apple.driver.ApplePolicyControl     3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
com.apple.driver.XsanFilter     404
com.apple.iokit.SCSITaskUserClient     3.5.6
com.apple.driver.AppleUSBHub     623.4.4
com.apple.driver.AppleFWOHCI     4.9.9
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     34
com.apple.driver.Intel82574L     2.3.0b5
com.apple.driver.AirPort.Brcm4331     615.20.17
com.apple.driver.AppleRAIDCard     304
com.apple.driver.AppleAHCIPort     2.6.6
com.apple.driver.AppleUSBEHCI     621.4.6
com.apple.driver.AppleUSBUHCI     621.4.0
com.apple.driver.AppleRTC     1.5
com.apple.driver.AppleHPET     1.8
com.apple.driver.AppleACPIButtons     1.8
com.apple.driver.AppleSMBIOS     1.9
com.apple.driver.AppleACPIEC     1.8
com.apple.driver.AppleAPIC     1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     214.0.0
com.apple.nke.applicationfirewall     4.0.39
com.apple.security.quarantine     2.1
com.apple.driver.AppleIntelCPUPowerManagement     214.0.0
com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4
com.apple.driver.AppleMultitouchDriver     237.4
com.apple.iokit.IOSerialFamily     10.0.6
com.apple.iokit.IOSurface     86.0.4
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.4.7fc2
com.apple.iokit.IOAudioFamily     1.9.2fc7
com.apple.kext.OSvKernDSPLib     1.12
com.apple.nvidia.gf100hal     8.1.6
com.apple.NVDAResman     8.1.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.1.7f2
com.apple.driver.AppleSMBusController     1.0.11d1
com.apple.iokit.IOFireWireIP     2.2.5
com.apple.driver.AppleHDAController     2.4.7fc2
com.apple.iokit.IOHDAFamily     2.4.7fc2
com.apple.driver.AppleGraphicsControl     3.4.5
com.apple.iokit.IONDRVSupport     2.3.7
com.apple.iokit.IOGraphicsFamily     2.3.7
com.apple.driver.AppleSMC     3.1.5d4
com.apple.driver.IOPlatformPluginLegacy     1.0.0
com.apple.driver.IOPlatformPluginFamily     5.4.1d11
com.apple.driver.AppleUSBHIDMouse     175.8
com.apple.driver.AppleHIDMouse     175.8
com.apple.driver.AppleUSBHIDKeyboard     170.2.4
com.apple.driver.AppleHIDKeyboard     170.2.4
com.apple.driver.IOBluetoothHIDDriver     4.1.7f2
com.apple.iokit.IOBluetoothFamily     4.1.7f2
com.apple.iokit.IOUSBHIDDriver     623.4.0
com.apple.driver.AppleUSBMergeNub     621.4.6
com.apple.driver.AppleUSBComposite     621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.5.6
com.apple.iokit.IOBDStorageFamily     1.7
com.apple.iokit.IODVDStorageFamily     1.7.1
com.apple.iokit.IOCDStorageFamily     1.7.1
com.apple.iokit.IOAHCISerialATAPI     2.5.5
com.apple.iokit.IOFireWireFamily     4.5.5
com.apple.iokit.IOUSBUserClient     630.4.4
com.apple.iokit.IO80211Family     530.5
com.apple.iokit.IONetworkingFamily     3.0
com.apple.iokit.IOSCSIParallelFamily     2.5.1
com.apple.iokit.IOSCSIBlockCommandsDevice     3.5.6
com.apple.iokit.IOSCSIArchitectureModelFamily     3.5.6
com.apple.iokit.IOAHCIFamily     2.5.1
com.apple.iokit.IOUSBFamily     630.4.5
com.apple.driver.AppleEFINVRAM     2.0
com.apple.driver.AppleEFIRuntime     2.0
com.apple.iokit.IOHIDFamily     1.8.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     220.3
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     345
com.apple.iokit.IOStorageFamily     1.8
com.apple.driver.AppleKeyStore     28.21
com.apple.driver.AppleACPIPlatform     1.8
com.apple.iokit.IOPCIFamily     2.8
com.apple.iokit.IOACPIFamily     1.4
com.apple.kec.corecrypto     1.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.93 GHz, 16 GB, SMC 1.39f5
Graphics: NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 4, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 8, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 5 incoming serial ports
Network Service: LINKSYS WAG320N, AirPort, en2
Network Service: Ethernet 2, Ethernet, en1
PCI Card: NVIDIA Quadro 4000, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA Quadro 4000, NVDA,Parent, Slot-1
PCI Card: pci1033,194, Slot-3
PCI Card: Apple RAID Card, sppci_raid, Slot-4
Serial ATA Device: Optiarc DVD RW AD-7240S
Serial ATA Device: Optiarc DVD RW AD-7240S
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd500000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd530000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd520000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 5
USB Device: Smart-UPS 2200 FW:654.19.I USB FW:7.4, 0x051d (American Power Conversion), 0x0002, 0x1d100000 / 2
USB Device: PTK-840, 0x056a (WACOM Co., Ltd.), 0x00ba, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed

Problem at startup in my Mac Pro

Hello, I have a problem when i start up my Mac Pro. Here's a screen:
http://img863.imageshack.us/img863/5755/31052011325.jpg
It's not occurring everytime. Just sometime. When I get that error, I hold the startup button in order to restart.
.. can you please give me some suggestions on how to solve this?

That looks to be s display-card problem. If you have not just blown the dust out of your display card, you should do that now.
Regardless, you should begin planning for a new display card.

Problem with Windows 7 on Mac Pro 3,1

I am trying to install Windows 7 to a seperate HDD an on Mac Pro 3,1 and have run into a problem getting it to work.
To start with I had a 500GB HDD which was partitioned using Bootcamp assistant and had OSX 10.6,8 and Windows 7 installed on it and worked fine. I decided to purchase 2x 120GB SSDs (1 for OSX and 1 for WIndows) and also purchased a Sata III PCI-e card to go with them. I started by putting in the card and connecting the two drives, booting into OSX from my exsisting HDD and cloning it to the 1st SSD using CCC. Everything went perfect. OSX booted off the new SSD and speeds were amazing (Getting around 448MB/s Read and 395MB/sec Write).
Since everything was working I then removed the HDD and once again booted up to make sure it worked. Once booted I then proceded to run Bootcamp assistant and chose to use the entire 2nd SSD. It formated the SSD to fat32 and named it BOOTCAMP as usual then rebooted to the Windows CD. WIndows would see the SSD but would fail to install giving me some error code so I went to the forums to look it up and everyone was saying that you must disconnect any other HDDs while installing Windows so i disconnected the OSX SSD and once again ran the WIndows setup. I went through the entire setup procedure just fine and began runing the Windows updates and installing the bootcamp drivers. Everything was fine, Windows was booting fast and everything was working so I shutdown and reconnected the OSX drive and booted up holding the Option key and selected to boot to OSX. Once booted I then shutdown and booted holding Option once again but this time chose Windows but to my surprise, Windows would no longer boot. I disconnected the OSX SSD and same result, WIndows was no longer bootable. I then tried to do a startup repair, windows recovery and even went through the entire windows setup again. Every time I reconnet the OSX drive and boot to OSX it kills the Windows boot. I then tried again but this time removing the Sata II card and pluging the SSDs into the normal HDD bays. Same result. After reinstalling Windows agin it once more killed the Windows boot when I booted to OSX.
After all that I decided to try just using one SSD and letting Bootcamp assistant partition it and install WIndows that way. Same result. After booting OSX after finishing Windows it kills the Windows boot.
Am I doing something wrong? My old HDD that has windows on it still works fine and its from the same Windows CD. I even purchased Lion after all that, upgraded my OSX drive and retried everything and still not owrking.
Can anyone please help? I am very fustrated and can't understand whats wrong.

Well I finally got it running smooth again, turns out that one of the windows updates changed the way the licensing works and for some odd reason it no longer works on Mac, go firgure lol. I ended up giving my windows 7 license to a friend who just built a PC so it worked fine for him but I am out $139 .
To get it working again I had to take my Mac Pro to work and let the IT guys install the Enterprise Edition and activate it againist the companies activation server. Works great now but it means I will have to take it to work every 6 months now for activation
I wish Microsft would stop making things so hard for us Mac guys.

Problemas con la instalacion del Xl Report.

Estimados:
Tengo un cliente con SAP 2005 A SP 01 PL 34 y SQL Express. Como desea migar a SAP 2007 A fue necesario cambiar el SQL Express por SQL Server 2005.
Este cambio se realizo sin desinstalar SAP, respaldando las bases de datos, inclusive la SBO-COMMON.
Cuando se instalo el nuevo SQL, se cambio el nombre al servidor.
Una vez lista la instalación, se cargaron las bases de datos respaldadas y no tuvimos problemas con SAP.
En SAP estaba instalado el addons XL Report, pero al querer iniciarlo este envió un mensaje de error, en el cual indicaba que no encontraba o existía el nombre del servidor del SQL antiguo.
Debido a esto se decidió desinstalar el XL Report para reinstalarlo.
Al hacer este proceso el problema suscitado es que no lo instala y por lo tanto no lo inicia.
Es importante señalar que al momento de instalarlo no envía ningún mensaje de error, e inclusive dice en la parte inferior de la pantalla u201CAddons instalado con éxitou201D.
El cliente realizara la migración en un par de semanas mas, por lo tanto debo dejar funcionando el XL Report en estas condiciones.
Alguien sabe porque ocurre este problema y como se soluciona?
Agradeciendo de antemano el apoyo, les saluda
Viviana Medina.

Tienes que eliminar en el sql el inicio de sesión xlruser y la base de datos ixmetaSbooem y proceder de nuevo a la instalación del addon desde el inicio.

I have problem to start up my Mac Pro ?

My Mac Pro now is frozen and I can not start up
And when I connect charger there is no green light

And when I connect charger there is no green light
The problem may be the charger > Apple Portables: Troubleshooting MagSafe adapters

HD problem after connecting to new Mac Pro

Went to our first MUG meeting of the years tonight. And took along my Lacie 500gig firewire external H/D. This was going to be used to demo the new iTunes 7 app. The computer being used was a new Mac Pro duo core intel etc.
When I plugged the H/d in to the Firewire 400 socket on this machine it would not mount. So sadly the demo would have to wait for another meeting.
MORE SADLY.... when I returned home and tried to connect it to my 15" iMac it would not mount..... What has happened??
It is more than obvious to me that my hard-drive has been corrupted by trying to use it with Apples latest entry into the market.
I have swapped cords Ports etc. The drive does power up when I start the computer and sounds like it is going to mount... Profiler does not show it...
any help would be appreciated...

Seems that I have a solution.... It would seem after some troubleshooting that the FireWire 400 port in no longer working.... why? I can only guess. The other FireWire 800 and USB 2 ports are fine.... Thankfully I am still in the warrantee window....
Let me say that this is the first and only problem I have had with Lacie H/D's....other than ...."Make sure that you initialize it before adding any files to it"... I know it is supposed to be Plug & Play with Mac, But I am betting it will think it is connected to a PC....unless you take the initializing step...

Problema con el dashboard del mac pro

Similar Messages

Maybe you are looking for