Problema con el Pitch bend - Oxygen 61 New
Hola, me acabo de comprar el Controlador Midi Oxygen 61 New de M-Audio, pero el Pitch bend no funciona en MainStage, lo reconoce pero no funciona.
En logic no hay problemas, eh tenidos varios controladores pero solo con este tengo ese inconveniente.
Favor su ayuda.
Saludos
Hola, me acabo de comprar el Controlador Midi Oxygen 61 New de M-Audio, pero el Pitch bend no funciona en MainStage, lo reconoce pero no funciona.
En logic no hay problemas, eh tenidos varios controladores pero solo con este tengo ese inconveniente.
Favor su ayuda.
Saludos
Similar Messages
-
Pitch bend, modulation and velocity sensitivity midi data?
Well, this is post number one, so I hope the answer is not too obvious. I loaded Logic pro into my computer about 6 hours ago (fun, fun, fun!) and about an hour ago I noticed that Logic is not responding to pitch bend, modulation or velocity data.
I am using a JV 1000 as a controller and all of these things work fine when I am using Garage Band or Reason 3.0. I can see the pitch bend data changing the transport window when I manipulate the bender on my keyboard. Also, the Audio Midi setup in the utilities folder shows that my JV 1000 is recognized as the controller.
I have looked through the manuals and searched through the various menus and tabs in Reason, to no avail.
Thanks for your help in advance, GrahamHi gtrip. I will start with the easy question first.
"Mac OS X: The missing Manual" is my choice of self help book for poor sods like me who have been using a PC for the last 15 years, and really have slim to no idea what they are doing on a Mac. I have found it very helpfull in getting aqauinted with the Mac OS, it is written in plain english but is technical enough to be useful.
I am barely familiar with version 7.1 so I don't really know if this is a known problem in 7.0.1.
You might try:
-all of the things that Stash recomends a few posting up.
and/or if you have not already done this:
-create a new user, log in as the new user, open logic up for the first time as a new user, which will run you through the set up menus, which will create a new preference file for the new user. Now, if you no longer have the same problem, when opening logic as the new user, it will almost surely be caused by a bad preference file when you are logged in as the other user. Or, you are systematically entering an incorrect choice for one of the options that you are given.
In my case, despite the fact that I imput my Roland JV 1000 as the controller, the preference file was not set up correctly or while setting up the preference file I must have entered an incorrect choice for one of the options.
If anyone wants to correct or add anything to what I have said, feel free and jump in.
I hope this is helpful, let us know. -
Pitch bend lag when using internal quicktime synth.
I want to do a pitch bend at the end of a midi note in Logic 8. When i go to listen back in logic it does the pitch bend at the beginning of the next note. I decide to export the project as a midi file and open it in quicktime player. It plays the bend properly. I guess that's cool however I don't want to have to export it to a midi file every time i want to hear how the finished product will sound. Especially if I need to fine tune the pitch-bend.
I've tried messing around in the automation properties and sample accurate automation under audio tab and don't hear any change.
In the environment I have a 16 channel GM instrument patched into the internal quicktime synth.
ThanksDid you do the usual stuff, such as reset PRAM?
http://support.apple.com/kb/HT1379
There are some sound settings in PRAM, although I think it's only for sound output.
Also, as a test, I would create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account. -
Problemas con mi Photoshop cs2
Hola a todos, tengo un problema con mi Potoshop, cuando lo
pongo en marcha
le cuesta mucho hacer cualquier acción que le mande y se
queda pensado un
tiempo aunque la foto sea pequeña.
¿A que puede ser debido?.
Mi ordenador es un p4 a 3000 con 2gb de ram y una targeta
grafica ati 9600
de 256 mb. Sistema Xp Professional.
Ayuda, graciasThis is a multi-part message in MIME format.
------=_NextPart_000_0024_01C70998.1E165ED0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Mira en configuraciones que discos duros usa como archivo
temporales.
Lucas Sevilla
www.lucassevilla.info
www.gestproyect.info=20
"JmR" <[email protected]> escribi=F3 en el mensaje =
news:[email protected]...
Hola a todos, tengo un problema con mi Potoshop, cuando lo
pongo en =
marcha=20
le cuesta mucho hacer cualquier acci=F3n que le mande y se
queda =
pensado un=20
tiempo aunque la foto sea peque=F1a.
=BFA que puede ser debido?.
Mi ordenador es un p4 a 3000 con 2gb de ram y una targeta
grafica ati =
9600=20
de 256 mb. Sistema Xp Professional.
Ayuda, gracias=20
------=_NextPart_000_0024_01C70998.1E165ED0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2900.2963"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Trebuchet MS" size=3D2>Mira en
configuraciones que =
discos duros=20
usa como archivo temporales.</FONT></DIV>
<DIV>
<P>Lucas Sevilla</P>
<P><A =
href=3D"
http://www.lucassevilla.info">www.lucassevilla.info</A></P>
<P><A href=3D"
http://www.gestproyect.info">www.gestproyect.info</A>
=
</P></DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT:
5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"JmR" <<A=20
href=3D"mailto:[email protected]">[email protected]</A>>
=
escribi=F3 en el=20
mensaje <A=20
=
href=3D"news:[email protected]">news:ejhm8n$j1v$1@forums=
.macromedia.com</A>...</DIV>Hola=20
a todos, tengo un problema con mi Potoshop, cuando lo pongo
en marcha =
<BR>le=20
cuesta mucho hacer cualquier acci=F3n que le mande y se
queda pensado =
un=20
<BR>tiempo aunque la foto sea peque=F1a.<BR>=BFA
que puede ser =
debido?.<BR><BR>Mi=20
ordenador es un p4 a 3000 con 2gb de ram y una targeta
grafica ati =
9600 <BR>de=20
256 mb. Sistema Xp Professional.<BR><BR>Ayuda,
gracias=20
<BR><BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0024_01C70998.1E165ED0-- -
Setting Pitch Bend in 12 semi-tones or whatever
Does anybody knows how to set pitch bend using software instrument in Logic?
I use a Roland GTR Synth but I can`t find where to set pitch bend (in 12 semi-tones, for example).
Using Reason I have no problem ´cause I get very clear access to the little window display in every synth module I use but I don`t know where to see same parameters in Logic.
Thanks in advance.As in reason, it depends on the instrument you're using. Its just that reason is generally a bit more consistent in how it organises modulation parameters on its instrument interfaces. For example, in the EXS24 you do it in the matrix editor bit (not sure if thats what its actually called but its the section which runs horizontally across the centre of the interface). You set the Source (Src) to Pitch Bend and the destination (Dest) to Pitch and use the slider to define (in cents) the range of the pitch you want the wheel to affect. On the ESM there is a disclosure triangle on the bottom left of the interface which allows you to set the bend ranges.
-
I'm not getting any response from the pitch bend on my roland xv-88 keyboard when playing v irtual instruments in logic pro.The modulations work when i push the wheel up,but when doing a pitch bend it only increases the volume up and down.The boxes in all the instruments i have tried show pitch bend thennumber of notes to bend,but nothing works.The roland is set and works ok alone and with digital performer and garage band.what am i doing wrong?
Frank : i have narrowed it down to the EXS 24. the quick access can be on or off now and most of the virtual sounds are reacting to the pitch bend,except for the EX24 which keeps loading new sounds every time i use the pitch bend wheel. logic seems to be much easier to access its sounds than performer with its sampler,so i usually use it before anything else i have.i just need to be sure everything will work day after day for live playing and recording so i continue to experiment. i don't understand what made the other sounds react to the bend but as long as it keeps goin,im ok with it, thanks again. i would like the EX24 to work also as it seems to be a powerfull sound machine.
-
Can I alter pitch bend range via plugin for synths that default to /- 2 semitones?
I am looking for a way to change the pitch bend range to +/- 12 for an AU instrument that does not have the capability to do so within its own settings. Is there some sort of plug-in I can run "after the fact" and assign to that channel to allow for this type of bend range?
Thanks!It only seems to go a minor 3rd, oddly.
https://www.steinberg.net/en/products/vst/neo_soul_keys/what_you_get.html
Here's a link to the synth page. I've been back and forth with their support team as well. They originally thought I wanted to do a bend event after the fact like in Logic. See below for our exchange.
Neil,
Let me double check. I do not believe it is possible, but I will make sure and let you know.
Thank you
Hi Jeff,
Thanks for getting back to me so quickly.
I'm actually looking to alter the range prior to recording so that the patch can be properly used with a new type of polyphonic keyboard we recently acquired at our school called a Seaboard.
In order for notes to bend and glissando properly, the pitch bend range for performance must be set at +/- 12 semitones for the start (not the usually 2). Most of the built in synths in Logic and Mainstage allow for this modification, so I was hoping to be able to make that change for NSK as well.
Because the keyboard bends notes directly from the keys, not a pitch wheel, that range is necessary for it to function properly with a particular synth.
Thanks again!
Neil
Neil,
>
> You would normally do this in your daw in their midi editor if you need to adjust what was recorded. If you have any further questions, please let me know.
>
> Thank you
> Jeff Deno
> Steinberg Support
>
>
> I am looking to be able to edit the pitch bend to /- 12, however. Is there a way to do this in the keyboard?
>
> Thanks!
> Neil -
Problem with Dreamweaver 8 - Problema con Dreamweaver 8
Hola que tal, tengo un problema con el dreamweaver 8.
Cuando lo abro, cuando esta cargando... pasan unos 3-4
segundos y se me sale solo sin ningun aviso.
Ya probe en Reinstalarlo y tambien restaure el Systema.
Pero nada.
Saludos. Y espero respuestasIf, my copy is original. the problem happened when a friend
me restart the system without previous warning when it was working
with Dreamweaver 8, from there began the problems.
Everything already tries. From reinstall, it to recovering
the system. Thanks for its attention! A greeting!
Waiting Replie's ;D!!!
My english is low... But improvement each day! How This
Word!! That no using Traslate.
Good Bye!
========================================================================================
========================================================================================
quote:
Originally posted by:
Newsgroup User
�Hola, usa usted la copia llena, autorizada de
Dreamweaver?
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Shane H" <[email protected]> wrote in
message
news:[email protected]...
> Paralink translation for those who wish to repsond:
>
> -----------------------------------------
> Hello, I have a problem with the dreamweaver 8. When I
open it, when it is
> loading ... approximately 3-4 seconds happen and it
leaves for me without
> any notice. I tried already in reinstalling it and also
I restored the
> system. But not at all.
>
> Greetings. And I wait for responses.
> ------------------------------------------
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
> =============================================
> Proud GAWDS Member
>
http://www.gawds.org/showmember.php?memberid=1495
>
> Delivering accessible websites to all ...
> =============================================
>
>
> "EmaX093" <[email protected]> wrote in
message
> news:[email protected]...
>> Hola que tal, tengo un problema con el dreamweaver
8.
>> Cuando lo abro, cuando esta cargando... pasan unos
3-4 segundos y se me
>> sale
>> solo sin ningun aviso.
>> Ya probe en Reinstalarlo y tambien restaure el
Systema.
>> Pero nada.
>>
>> Saludos. Y espero respuestas
>>
>
> -
Problemas con Windows y los .ico
Amigos, aca les dejo una consulta
Desde hace un tiempo estoy teniendo problemas con la vista
previa (como mosaicos y como iconos) de los archivos con
extensión ".ico"
(iconos), es desde que instalé un programa para
visualización de imágenes
que después desinstale - supuestamente con un
Uninstaller que saca "todo" lo
que quede en el registro de Windows, pero parece que este no
es el mejor :-P
El tema es que ahora en vez de ver la vista previa de mis
iconos
desde el Explorador de Windows, veo un icono de este
programa, como que
quedaron los archivos asociados aún cuando el programa
no este más.
Hay alguna manera de restablecer esto?, para que en vez de
mostrarme el logo del programa en los .ico me muestre la
miniatura?
Desde ya MUCHAS GRACIAS a todos por la ayuda
Saludos
Santiago - ArgentinaAmigos, por si alguno tiene el mismo problema que yo, YA
ENCONTRE LA
SOLUCION!
Cualquier cosa me avisan, pero creo que estas cosas raras
solo me pasan a mi
:-P
Saludos
Santiago - Argentina
"Santiago" <[email protected]> escribió
en el mensaje
news:fh2igs$rd2$[email protected]..
> Amigos, aca les dejo una consulta
>
> Desde hace un tiempo estoy teniendo problemas con la
vista
> previa (como mosaicos y como iconos) de los archivos con
extensión ".ico"
> (iconos), es desde que instalé un programa para
visualización de imágenes
> que después desinstale - supuestamente con un
Uninstaller que saca "todo"
> lo que quede en el registro de Windows, pero parece que
este no es el
> mejor :-P
>
> El tema es que ahora en vez de ver la vista previa de
mis
> iconos desde el Explorador de Windows, veo un icono de
este programa, como
> que quedaron los archivos asociados aún cuando el
programa no este más.
>
> Hay alguna manera de restablecer esto?, para que en vez
de
> mostrarme el logo del programa en los .ico me muestre la
miniatura?
>
> Desde ya MUCHAS GRACIAS a todos por la ayuda
>
> Saludos
>
> Santiago - Argentina
> -
Pitch bend via aftertouch?
Are there any built in instruments in Mainstage (or any decent free plug-ins) that have a parameter for controlling pitch bend with aftertouch? (or is it 'key pressure', y'know, you hold a note and then mash on it to send a controller message?) Will be using Axiom-49 for this.
Going on tour in a week and would like to get this resolved. Not TOO urgent but it would make some songs easier on me.
If you want to witness my inaugural Mainstage tour, go to http://www.54seconds.com. I'd love to meet some other users.
StewartIf it's normal channel pressure, you can learn it to a pitch wheel object in the layout, and then map it to Instrument > MIDI > Pitch Bend in the channels you want. The only problem I see is that you would only be able to bend in one direction.
-
[FL CS3] Problema con Flash en Safari
Hola amigos del foro,
Tengo un problema con un formulario hecho con Flash CS3:
utilizando la
propiedad "wmode transparent" en Safari los campos no son
clickeables por lo
que no se les puede ingresar texto. En Explorer, Firefox y
Chrome funciona
Ok.
Alguien conoce alguna forma para que esto no ocurra, algun
script, o algo
para solucionar este problema?
Desde ya Muchas gracias a quienes puedan ayudarme.
GuilleBueno, ya sabes que soy un curioso, y sí, probé los
foros web de Adobe
cuando nos los recomendo Don Claudio por primera vez, pero no
me gustaron,
la verdad, creo que se nota.
Lo que investigo ahora es cómo podemos hacer que
cualquier grupo de google
(como este mismo) sea leído por los lectores de news,
porque de conseguirlo
nos daría igual que lo cerrara Adobe, ya que
seguiría manteniéndos en google
mientras tenga actividad, y aunque sea baja (actualmente
estamos solamente
unos 80 'autores recientes'), dice san google que desde el
año 1999 se han
publicado aquí más de 370.000 mensajes.
Salu2
`8¬]
Juan Muro
": : Ale Photoshop : :" <[email protected]> escribió
en el mensaje de noticias
news:[email protected]...
> ahh.. estuviste probando el foro web a la fuerza no?
jejeje... no te quedó
> otra!!! jejej
>
>
>
>
>
> "Juan Muro" <[email protected]> escribió en
el mensaje de
> noticias:[email protected]...
>> Piaccere, signori.
>> Salu2
>> `8¬]
>> Juan Muro
>> "Guille" <[email protected]> escribió
en el mensaje de noticias
>> news:[email protected]...
>>> Muchas gracias Juan. Propondré cambiar el
diseño para desechar la opción
>>> wmode.
>>> Saludos
>>>
>>> Guille
>>>
>>> "Juan Muro" <[email protected]>
escribió en el mensaje
>>> news:[email protected]...
>>>> Hola Guille:
>>>>
http://groups.google.com.ar/group/macromedia.general.espana/browse_thread/thread/0e42388e4 8f4d01c
>>>> Salu2
>>>> `8¬]
>>>> Juan Muro
>>>> "Guille" <[email protected]>
escribió en el mensaje
>>>> news:[email protected]...
>>>>> Hola amigos del foro,
>>>>> Tengo un problema con un formulario
hecho con Flash CS3: utilizando la
>>>>> propiedad "wmode transparent" en Safari
los campos no son clickeables
>>>>> por lo que no se les puede ingresar
texto. En Explorer, Firefox y
>>>>> Chrome funciona Ok.
>>>>> Alguien conoce alguna forma para que
esto no ocurra, algun script, o
>>>>> algo para solucionar este problema?
>>>>> Desde ya Muchas gracias a quienes puedan
ayudarme.
>>>>>
>>>>> Guille
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> __________ Información de ESET NOD32
Antivirus, versión de la base de
>>> firmas de virus 3984 (20090402) __________
>>>
>>> ESET NOD32 Antivirus ha comprobado este mensaje.
>>>
>>>
http://www.eset.com
>>>
>>>
>>>
>>
>>
>> __________ Información de ESET NOD32 Antivirus,
versión de la base de
>> firmas de virus 3984 (20090402) __________
>>
>> ESET NOD32 Antivirus ha comprobado este mensaje.
>>
>>
http://www.eset.com
>>
>>
>>
>
> __________ Información de ESET NOD32 Antivirus,
versión de la base de
> firmas de virus 3984 (20090402) __________
>
> ESET NOD32 Antivirus ha comprobado este mensaje.
>
>
http://www.eset.com
>
>
>
__________ Información de ESET NOD32 Antivirus,
versión de la base de firmas de virus 3984 (20090402)
ESET NOD32 Antivirus ha comprobado este mensaje.
http://www.eset.com -
tengo un problema con mis contactos se me han borrado casi todos solo ha quedado algunos. entro a mi wasap y solo me salen sus numeros. Cuando quiero guardar el contacto en la agenda de contactos de mi equipo se guardan por solo un momento y luego se borra el nombre y solo queda el nombre en el historial de llamadas. Les rogaría si alguien tiene una solución a esto ya que e visitado foros y veo q a muchos le sucede el problema de que se les borran los contactos. pero ninguna de las soluciones encontradas me a podido solucionar el problema. Agradeciendo de antemano sus respuestas me despido.
P.D. Tengo el iphone 6 plus con y el 5 y en ambos me a sucedido lo mismo.Hola y gracias por participar en el foro,
Para tu comodidad, BlackBerry tiene su propio foro comunitario en español.
Aquí tienes el enlace para el foro: http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
Muchas gracias!
Chronos New to the Community click here
Community Moderator -
Yo actualice mi Iphone 3g al iOs 5 pero cada vez que intento activarlo me sale que no se lo puede activar, cuando lo pongo en la computadora y lo intento aparece que el iphone no tiene trajeta sim instalada y yo no se que hacer, necesito su ayuda. Por favor
Si no me equivoco la App que decís no funciona con snow leopard...
Ramiro Castro Xiques
Photographer
[email protected]
www.rcxphotography.com
www.cinquerosso.com/it/category/fotografia/
Il giorno 29/giu/2014, alle ore 19:47, Federico Platon <[email protected]> ha scritto:
problema con actualizacion bridge, como volver a la version precedente?
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Desinstala esa utilidad Adobe Application Manager, esta obsoleta, retirada, instala la utilidad Adobe Creative Cloud, es el panel de mi imagen.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6507543#6507543
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hola, tengo un problema con mi Time Capsule, despues de hacer varias copias de seguridad, ahora me aparece este error en mi Time Machine: La imagen del disco de copia de seguridad “/Volumes/Data/Victor.sparsebundle” ya está en uso.
Ojalá alguien pueda ayudarme con esto.
Saludos...Spanish:
Yo no hablo español así que por favor acepte mis disculpas por la mala traducción del Inglés al Español.
La barra gris que se ve en el inicio puede indicar que el sistema detectaun error de disco duro. Le sugiero que ejecuta la aplicación Utilidad de Discos que se pueden encontrar en las aplicaciones o carpeta Utilidades. Si detecta errores significativos cuando se ejecuta la opción "Verificar disco", entonces mi recomendación es realizar una copia de sus datos y tener el iMac a un proveedor de servicios para su posterior evaluación.
Si usted está interesado en el control de la unidad de disco duro SMART(Self-Monitoring, Analysis, y Presentación de Informes de Tecnología)registros de errores a continuación, descargar la aplicación SMART Utility desde:
http://www.volitans-software.com/smart_utility.php
Si los informes de utilidad para aplicaciones de Smart SMART de estadoque la unidad ha fallado o está fallando entonces es probable que necesites un nuevo disco duro.
English:
I do not speak Spanish so please accept my apologies for the poor translation from English to Spanish.
The gray bar you see at startup may indicate that your system is detecting a hard drive error. I suggest running the Disk Utility application which can be found in the Applications/Utilities folder. If you detect any significant errors when running the 'verify disk' option then my recommendation is to back up your data and take the iMac in to a service provider for further evaluation.
If you are interested in checking the hard drive SMART (Self-Monitoring, Analysis, and Reporting Technology) error logs then download the SMART Utility application from:
http://www.volitans-software.com/smart_utility.php
If the SMART Utility application SMART status reports that your drive has failed or is failing then you will probably need a new hard drive. -
Unable to record pitch bend MIDI information
I have a Logic problem that nobody seems to be able to figure out. When I use pitch bend on my MIDI controller I see that Logic gets the message because it shows up on the transport. However, all of my virtual instruments do not react to the pitch bend, and I am not able to record any pitch bend information. If anybody out there thinks they can help please feel free to let me know whats going on here. Thanks
It could be several things... if you want to use my forums on http://logicprohelp.com you can post your question and upload your .lso session file within the thread, and I will look at it.
Maybe you are looking for
-
How to create a Web Part in SharePoint To Show All List and List Items
I did try this by reading the following article: http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx but when I am building that web part I am getting some errors public
-
Hello everybody, thanks in advance for taking time to read this. Ok, I'm pretty new to FCP and Macs in general. I just got a MacBook Pro and installed FCP studio 5. I uploaded a clip for a project I'm working on and lo and behold, there is no audio w
-
How to convert xsl-fo to rtf?
hi all, does anyone know of a tool that can convert xsl-fo template to rtf template? thanks. allen
-
Macbook Pro 2011 loud fans and slow computer functioning?
Today my Macbook has suddenly begun to act slow and the fans are running quite loud. I read online that I should try checking the activity moniter, and I did this, and a program is currently taking a large portion of my CPU. However, I am unable to q
-
What is the best way to install OSX and other computer files?
Hi, Long story short my Mac OSX got rewritten over with Windows XP so have to do a fresh install. So do I do the fresh install first and then transfer over all the stuff from my sister's computer to mine via Firewire? You know when you first get a Ma