PROBLEMA DE CONECCION

HOLA, TENGO PROBLEMAS AL CONECTAR MI IPOD CON MI LAP, SE REINICIA Y ESCANE TODO EL SITEMA Y NO PUEDO GRAVAR MI MUSICA DE LA LAP A IPPOD.
TENGO WINDOWS XP.
ALUIEN SABE CUAN PUEDE SER EL ORIGEN DEL PROBLEMA??
GRACIAS
HI, I HAVE AN IPOD TOUCH AND QHEN I CNNECT IT TO MY LAP TOP, THE LAP RESTARS AND MARK A ERROR AND BEGEN TO SCAN ALL C DISC, IT IS SAID , PROBLEM IN "FAT32".
MY SISTEM IS WINDOWS XP.
SOMEBADY KWNOS WICH MAY BE THE ORIGIN OF THE PROBLEM?
THAKS
JORGE

problema de impresión le doy directamente y no me abre, me indica que no reconoce

Similar Messages

Tengo problemas de coneccion

Hola con todos, tengo problemas de coneccion con la PC y el iPhone 6 plus me sale este error de mensaje: El iPhone no puede sincronizarse. No dispone de suficientes privilegios de acceso para ejecutar esta operación. Nose cual será el problema en si me gustaria que me ayudasen

Buenos días, yo tengo el mismo problema pero con mi IPAD y esta actualizado a la ultima version 7.0.3. Estuve en Apple Store y me revisaron el terminal (por si era problema de antena) y todo estaba correcto. Ademas, en la tienda cogía la wifi de la propia tienda y del propio centro comercial. La solucion que me dieron en la tienda fue la de reestablecer el IPAD... No lo he hecho todavia porque no me convence nada y os digo porque
Es curioso que el IPAD coga las WIFI´s que no estan protegidas (hacer la prueba) y sin embargo tenga problemas para coger las WIFI´s que requieren una clave de acceso. Hice la prueba con mi IPHONE y el IPAD solo detecto las WIFI´s desprotegidas y mi IPHONE con version 6.1.3 detectó tanto las desprotegidas como las protegidas.
No se si tiene algo que ver con actualizar el firmware de los routers ya que es posible que IOS 7 no sea compatible con los routers (VODAFONE en mi caso) que actualmente tenemos en casa o por donde puede ir el problema.
Seguiré investigando y os cuento

Tengo problema con 3G no aparece en la pantalla.

Como puedo solucionar el problema de coneccion, no aparece el sinbolo 3G en la pantalla por lo tanto no se conecta a internet.

Hola y gracias por participar en el foro,
Para tu comodidad, BlackBerry tiene su propio foro comunitario en español.
Aquí tienes el enlace para el foro: http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
Muchas gracias!
Chronos New to the Community click here
Community Moderator

Tengo problema con mi tascam 1082 tengo una mac bookpro i7 y no logro tener un conectividad correta la conexcion de mi puerto fire wire 800 pero la de la consola usa una coneccion fire wire 600 como saber si la macboook pro i7 que tengo pueda funciona no

tengo problema con mi tascam 1082 tengo una mac bookpro i7 y no logro tener un conectividad correta la conexcion de mi puerto fire wire 800 pero la de la consola usa una coneccion fire wire 600 como saber si la macboook pro i7 que tengo pueda funciona no hay manera de introducirle SD-EXPC34-2F 2 x Port 1394A Firewire ExpressCard porque ya mac no hace ese puerto y quisiera que ustedes me puedan dar una solucion para no seguir gastar dinero asi por asi
I have problem with my mac I have a tascam 1082 bookpro i7 and I can not have a liaison connectivity the correct one of my fire wire port 800 but the console using a fire wire connection 600 as pro macboook know if I have to work i7 that no way to introduce SD-EXPC34-2F 2 x 1394A Firewire ExpressCard port mac because you do not want that port and you can give me a solution for not going to spend money like this for so

Problema al cerrar SAP Business

problema al cerrar SAP Business
Buenas tardes!!
tengo un problema con el sap en una maquina
sucede que al cerrar sap y abrirlo nuevamente, este me pierde la coneccion con el servidor y cambia al idioma Czech.
he echo casi todo.
descargue el framework 3.5 sp1
desintae y reinstale sap
le di persisos de administradores al ususario
permisos de administrador al usuario de dominio tanto en la maquina local como a nivel de red.
quisiera su ayuda gracias
el sistema operativo de la maquina es: WIN. Vista Ultimate

Hola.
En windows Vista los problemas que se han presentado con SB1 están relacionados con las nuevas características de seguridad que son más estrictas que en Windows XP, y con la nueva interfaz gráfica que incorpora efectos avanzados.
El problema que está experimentando debe estar sucediendo por restricciones de seguridad que evitan que se guarde en el registro de windows la configuración del cliente SB1.
Por este motivo debe desactivar el UAC (tal como se indicó anteriormente) y además debe tenerse en cuenta lo siguiente:
- Se debe realizar las tareas siguientes desde una cuenta tipo administrador (de la máquina y/o dominio).
- Se deben ejecutar las aplicaciones con una cuenta tipo administrador (propiedades del ícono de la aplicación, ejecutar como...).
- Desinstalar el cliente SB1, reiiciar el PC, instalarlo de acuerdo a las recomendaciones anteriores.
Si después de eso persiste el problema, intenta los siguiente (más detalles en los links a los otros casos):
Para versión 2007:
1. Ir a C:Documents and SettingsConfiguración LocalApplication DataSAPSAP Business One.
2. Sacar un back up de esa carpeta y luego eliminarla. (Se pueden eliminar también los archivos y carpetas presentes en %temp%).
3. iniciar SAP Business One y configurar los datos de conexión a la Base de datos.
4. Cerrar SB1 (Archivo + Salir) o (CTRL+Q).
5. Reiniciar el PC y al volver a abrir SB1 debe conservar la configuración.
La sugerencia dada por Quintaro también la puede seguir.
En caso que no funcione, es mejor reinstalar desde cero todo el software de la máquina cliente, desactivar UAC y los efectos especiales del Aero, luego instalar los componentes previos y por último el cliente SB1 desde la carpeta compartida B1_SHRClient. No olvidar crear las excepciones para SB1 en el firewall.
Espero se solucione el problema.
Quedamos en espera del resultado.
Saludos.

Problemas al grabar la voz

hola gente.. tengo una PC Windows XP, MIC. Sennheiser E 835. he usado Cool edit pro, Audacity, Cubase... ya q mi Pc no admite PRO- TOOLS. La cosa es que yo uso una pista mp3 para la musica y yo grabo la voz.. tipo karaoke, pero cdo escucho la grabación resulta q la voz se escucha com si el volumen se subiera y se bajara repentinamente... y puedo asegurar q no me aljo del microfono. Quizas mi MIC no tenga mucha ganancia... pero n creo q ese sea el problema.. me han dicho q tengo q comprimir la voz.. pero no sé como.. si alguien me ayuda .. estaré muy agradecida ... Saludos gente y larga vida para todo!

Hola Bell,me da gusto que haya tanto talento en toda latinoamerica
y que gracias a la tecnologia puedan tener sus propios home studios sin
necesidad de gastar mucho y pagar horas en un estudio profesional
solo por darse la satisfacion de tener un demo musical o maqueta
Mencionas varios software de audio todos muy buenos ,pero siempre he dicho
el mejor de ellos es el que mas conoscas y te desenvuelvas en el mejor
en mi caso es Cool Edit Pro y desde hace unos años Adobe Audition
flexible,intuitivo y potente un todo en uno.
tu problema es sencillo de solucionar,pero siempre es importante conocer y jugar un proco con
el software en tu caso *Cool Edit Pro es muy flexible y ligero para trabajar
estos pasos que te comparto son aplicables tanto en *CEP2 ó en A.Audition (en todas sus versiones)
Desconosco si tienes perifericos ,mixers o consolas antes de tu computadora
ojala y si ,de esa forma no correrias el riesgo de meter algun ruido extraño a tu audio,un zumbido de tierra
generado por un mal cable o mover la coneccion del microfono directo
a tu computadora
Pero tomare en cuenta que solo tienes tu pc y tu microfono Senheiser E835
conexion directa
Verifica que tu Cool Edit ó Audition reconozca tu tarjeta de Audio en donde conectaras tu microfono
y este pueda grabarte adecuedamente
Depues arrastras tu pista Musical al canal 2
va ser tu referencia solo para grabar la voz sin preocuparnos si estas mas abajo de la pista
como no contamos con alguna interface o mixer externa
si grabas en una segunda pista automaticamente tambien te grabara mezclado fondo y voz
entonces vamos hacer algo muy sencillo
Aplicaremos el boton amarillo " solo [ S ]" en tu pista musical (PARA MONITOREAR)
En el track en que decidamos grabar la voz en mi *EJ. el track #1 le di click a Record=(Grabar)
Seleccione el boton rojo [R],asi solo grabo la voz y mantengo el tiempo y entonacion de mi pista
y mi voz se registra sola y limpia con opcion a procesarla o aplicarle algun efecto como flanger o algun deley
con este Tip de grabacion puedes repetir la misma operacion en mas tracks para tener varias tomas y quedarte con la mejor o hast ajugar y hacer alguna mezcla en capas usando varias tomas en ciertos fragmentos de tu cancion ,ya sean coros o momentos intensos de esta produccion.
ya que tienes tu voz modificas los niveles de volumen de la pista para que queden por debajo a la de tu voz
usando los evelopes (puntitos) asi los activas en Cool Edit Pro 2
Despues los modificas bajando y subiendo volumen con los envelops o puntitos
dependiendo las entradas y subidas de voz
ESTO MISMO LO PUEDES USAR CON CUALQUIERA DE LOS PROGRAMAS DE
ADOBE AUDITION EN SUS EDICIONES A.Audition 1, A.Audition 1.5, A.Audition 2 & EL POTENTE A.Audition 3.0
Apartir de que Audition aposto por hacer un Hibrido de AUDITION Y SOUNDBOOTH
En sus Ediciones Audition CS 5.5 (version 4) & su reciente Audition CS6 (Version 5)
nos modificaron algunos sistemas de trabajo,grabacion y edicion ,nos agregaron nuevas herramientas y nos quitaron otras
para poder copetir y poder transferir algunas sesiones con otros software populares
aunque desde mi punto de vista con la limitante de no poder abrir antiguas sesiones de audition anteriores
:S solo bajo la ayuda de un programita externo, no creado por adobe que no debiera pero nimodo..
Todo esto que comento ,no quiere decir que con audition CS5 O CS6 ,No se pueda Si no todo lo contrario
y aqui tambien lo explico.
GRABANDO VOZ SOBRE PISTA SIN INTERFACE USANDO ADOBE AUDITION CS6
Si se dan cuenta la interface del software es muy similar ,por lo cual es igual de sencilla y potente
puedes usar el mismo sistema aplicando el solo a tu pista y grabar encima
pero como les comente antes tambien la gente de adobe haciendo caso a muchas de las
peticiones de usuarios de Audition ,nos dio nuevas formas de grabar si afectar
tu segundo track,sin la necesidad de aplicarle el solo[ S] boton amarillo
que bien !!! no creen!! y eso no es todo,la calidad con la que graba esta formidable
eso si es conveniente tener una pc actualizada con un bue procesador multiple
que si asi solo el programa ahora viene mas rapido con un buen procesador vuela
aaa sin olvidar que desde la version CS5.5 Y a es compatible con MAC
OTRA OPCION ES NIVELAR VOLUMENES
ES CON LA AUTOMATIZACION
activas en modo escribir y desde la mixer virtual de tu audition modificas en tiempo real
mientras grabas o reproduces
lo puedes hacer manual con tu mouse moviendo los faders en tu software o
apoyado de algun controlador midi o workstation de faders automaticos ,son geniales
pruebenlos se los recomiendo hay muchos models y marcas
si no tienes mucha plata para tu controlador externo solo hazlo poniendo el cursor en el fader
de tu mixer virtual del audition
Espero y esta respueste le sea util a Bell y a mas usuarios de este foro de audtion
por aqui nos estaremos leyendo saludos desde Sinaloa México
Enrique Arista/Creativox Pro
escucha algunos de mis trabajos en : http://soundcloud.com/creativoxpro

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

A problem with Threads and MMapi

I am tring to execute a class based on Game canvas.
The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
The MIDI tone "Stammers".
How to over come the problem?
Thanks in advance
Kobi
See Code example below:
import java.io.IOException;
import java.io.InputStream;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
import javax.microedition.lcdui.game.GameCanvas;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
public class MainScreenCanvas extends GameCanvas implements Runnable {
     private MainMIDlet parent;
     private boolean mTrucking = false;
     Image imgBackgound = null;
     int imgBackgoundX = 0, imgBackgoundY = 0;
     Player player;
     public MainScreenCanvas(MainMIDlet parent)
          super(true);
          this.parent = parent;
          try
               imgBackgound = Image.createImage("/images/area03_bkg0.png");
               imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
               imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
          catch(Exception e)
               System.out.println(e.getMessage());
      * starts thread
     public void start()
          mTrucking = true;
          Thread t = new Thread(this);
          t.start();
      * stops thread
     public void stop()
          mTrucking = false;
     public void play()
          try
               InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
               player = Manager.createPlayer(is, "audio/midi");
               player.setLoopCount(-1);
               player.prefetch();
               player.start();
          catch(Exception e)
               System.out.println(e.getMessage());
     public void run()
          Graphics g = getGraphics();
          play();
          while (true)
               tick();
               input();
               render(g);
      * responsible for object movements
     private void tick()
      * response to key input
     private void input()
          int keyStates = getKeyStates();
          if ((keyStates & LEFT_PRESSED) != 0)
               imgBackgoundX++;
               if (imgBackgoundX > 0)
                    imgBackgoundX = 0;
          if ((keyStates & RIGHT_PRESSED) != 0)
               imgBackgoundX--;
               if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
                    imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
      * Responsible for the drawing
      * @param g
     private void render(Graphics g)
          g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
          this.flushGraphics();
}

You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM

J2ME problem with threads

Hi all,
I would like to ask you for a help. I need to write a small program at my university. I started to write a midlet which function would be to countdown time for sports activities. I woul like to start a new thread - the one that counts down - and at the same time make the main thread sleep. After the "countdown" thread finishes, the main thread wakes up and waits for user input. The problem is that when the "countdown" thread finishes his work, I've got Uncaught exception java/lang/NullPointerException. error and the midlet halts.
Below you can find the code
import java.lang.*;
import java.util.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class intervals extends MIDlet implements CommandListener
public Display ekran;
private SweepCanvas sweeper;
private Form rundy;
private TextField round0, round1, round2, round3, round4, round5, round6, round7, round8;
private long czas,x;
private Command exitCommand;
private Command addRound;
private Command delRound;
private Command start;
private TextField repeat;
private Form odliczanie;
private Alert ostrz;
Licznik thread;
String test;
StringItem test1;
int parz,i,j,k;
static int l;
int ilrund;
int ilpowt;
Item sec;
long sec1;
public intervals()
    rundy = new Form("Interwały sportowe");
    exitCommand = new Command("Wyjście", Command.EXIT, 2);
    addRound = new Command("Dodaj","Dodaj rundę", Command.ITEM,1);
    delRound = new Command("Usuń","Usuń ostatnią rundę", Command.ITEM,1);
    start = new Command("Start", Command.ITEM,1);
    odliczanie = new Form("Odliczanie");
    TextField dodaj(TextField kolej)
        kolej=new TextField("Podaj czas (s) rundy "+parz,null, 4, TextField.NUMERIC);//stworzenie nowej instancji do wybierania czasu trwania rundy
        if(rundy.size()==0)
            rundy.insert(rundy.size(),kolej);
            else
                rundy.insert(rundy.size()-1, kolej);
        return kolej;
    void odliczanie(TextField round)
        monitor m=new monitor();
        k=Integer.parseInt(round.getString());
        ekran.setCurrent(odliczanie);
        thread=new Licznik(k,odliczanie);
        thread.start();
        ekran.setCurrent(rundy);
public void startApp()// throws MIDletStateChangeException
    rundy.deleteAll();
    repeat = new TextField("Podaj ilość powtórzeń",null,1,TextField.NUMERIC);
    rundy.addCommand(addRound);
    rundy.addCommand(exitCommand);
    rundy.setCommandListener(this);
    Canvas obrazek = new MyCanvas();
    ekran = Display.getDisplay(this);
    ekran.setCurrent(obrazek);
    czas=System.currentTimeMillis();
    while (System.currentTimeMillis()<czas+1000)
        continue;
    ekran.setCurrent(rundy);
public void pauseApp()
public void destroyApp(boolean unconditional)
    notifyDestroyed();
public void commandAction(Command c, Displayable s)
    if (c == exitCommand)
        destroyApp(false);
        notifyDestroyed();
    else if(c==addRound)
        if(rundy.size()==0)//Sprawdzenie ilości elementów w celu poprawnego wyświetlania liczby rund w formie
            parz=1;
            else
            parz=rundy.size();
        switch(parz)
            case 1:
                round0=dodaj(round0);break;
            case 2:
                round1=dodaj(round1);break;
            case 3:
               round2= dodaj(round2);break;
            case 4:
                round3=dodaj(round3);break;
            case 5:
                round4=dodaj(round4);break;
            default:
                ostrz=new Alert("Uwaga","Maksymalna liczba rund wynosi 9", null, AlertType.INFO);
                ostrz.setTimeout(3000);
                ekran.setCurrent(ostrz);
        if(rundy.size()==1)
            rundy.append(repeat);
            rundy.addCommand(start);
        rundy.addCommand(delRound);
    else if(c==delRound)
        if(rundy.size()!=0)
            rundy.delete(rundy.size()-2);
            if (rundy.size()==1)
                rundy.deleteAll();
            if(rundy.size()==0)
                rundy.removeCommand(delRound);
                rundy.removeCommand(start);
    else if(c==start)
        ilrund=rundy.size()-1;
        if(this.repeat.size()>0)
            ilpowt=Integer.parseInt(this.repeat.getString());
        ekran = Display.getDisplay(this);
        for (i=1; i<=ilpowt;i++)
            odliczanie= new Form("Odliczanie");
             for (j=0;j<ilrund;j++)
                switch(j)
                     case 0:
                         odliczanie(round0);
                         break;
                     case 1:
                         odliczanie(round1);
                         break;
                     case 2:
                         odliczanie(round2);
                         break;
                     case 3:
                         odliczanie(round3);
                         break;
                     case 4:
                         odliczanie(round4);
                         break;
                     case 5:
                         odliczanie(round5);
                         break;
                     case 6:
                         odliczanie(round6);
                         break;
                     case 7:
                         odliczanie(round7);
                         break;
                     case 8:
                         odliczanie(round8);
                         break;
class Licznik extends Thread
    int czas1,k;
    Form forma;
    monitor m;
    public Licznik(int k,Form formap)
        czas1=k;
        forma=formap;
    public synchronized void run()
        while(czas1>0)
            forma.deleteAll();
            forma.append("Czas pozostały (s): "+czas1);
            try{Thread.sleep(1000);} catch(InterruptedException e){e.printStackTrace();}
            czas1--;
        if(czas1<=0)
            m.put();
    }and monitor class
public class monitor
boolean busy=false;
synchronized void get()
    if(!busy)
        try
            wait();
        }catch(InterruptedException e){e.printStackTrace();}
    notify();
synchronized void put()
    if(busy)
        try
        wait();
        }catch(InterruptedException e){e.printStackTrace();}
    busy=true;
    notify();
}Can anybody help me with this?

Groovemaker,
Your Licznik class has a member m of type monitor, which has not been instantiated (in other words is null) hence, when calling m.put() you get NullPointerException. Please also mind, that using Thread.sleep(1000) is not an accurate way of measuring time.
If I may, please use recommended for Java class naming conventions - some of your names use lower case, while other don't which is confusing to the reader.
Daniel

Problem with threads within applet

Hello,
I got an applet, inside this applet I have a singleton, inside this singleton I have a thread.
this thread is running in endless loop.
he is doing something and go to sleep on and on.
the problem is,
when I refresh my IE6 browser I see more than 1 thread.
for debug matter, I did the following things:
inside the thread, sysout every time he goes to sleep.
sysout in the singleton constructor.
sysout in the singleton destructor.
the output goes like this:
when refresh the page, the singleton constructor loading but not every refresh, sometimes I see the constructor output and sometimes I dont.
The thread inside the singleton is giving me the same output, sometime I see more than one thread at a time and sometimes I dont.
The destructor never works (no output there).
I don't understand what is going on.
someone can please shed some light?
thanks.
btw. I am working with JRE 1.1
this is very old and big applet and I can't convert it to something new.

Ooops. sorry!
I did.
     public void start() {
     public void stop() {
     public void destroy() {
          try {
               resetAll();
               Configuration.closeConnection();
               QuoteItem.closeConnection();
          } finally {
               try {
                    super.finalize();
               } catch (Throwable e) {
                    e.printStackTrace();
     }

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problem with Threads and "plase wait..."-Window

Hi everyone,
I have a problem that I'm not able to solve in any way... I have a time-consuming task (a file decryption) which I execute in a separate thread; I've used the SwingWorker class, like suggested by sun-tutorial, and it works right. The problem is that I have to wait that the decryption have finished before continuing with program-execution. Therefore I would like to display a "please wait"-window while the task runs. I've tryed all the possible ways I know but the problem is always the same: the waitWindow is displayed empty, the bounds are painted but the contents no; it's only painted when the decrypt-task has finished. Please help me, I have no more resources....
decrypt-file code:
public class DecryptFile {
private String cryptedFileNameAndPath;
private ByteArrayInputStream resultStream = null;
// need for progress
private int lengthOfTask;
private int current = -1;
private String statMessage;
public DecryptFile(String encZipFileNameAndPath) {
    cryptedFileNameAndPath = encZipFileNameAndPath;
    //Compute length of task...
    // 0 for indeterminate
    lengthOfTask = 0;
public ByteArrayInputStream getDecryptedInputStream() {
    return this.resultStream;
   * Called from ProgressBarDemo to start the task.
public void go() {
    current = -1;
    final SwingWorker worker = new SwingWorker() {
      public Object construct() {
        return new ActualTask();
    worker.start();
   * Called from ProgressBarDemo to find out how much work needs
   * to be done.
public int getLengthOfTask() {
    return lengthOfTask;
   * Called from ProgressBarDemo to find out how much has been done.
public int getCurrent() {
    return current;
public void stop() {
    current = lengthOfTask;
   * Called from ProgressBarDemo to find out if the task has completed.
public boolean done() {
    if (current >= lengthOfTask)
      return true;
    else
      return false;
public String getMessage() {
    return statMessage;
   * The actual long running task. This runs in a SwingWorker thread.
class ActualTask {
    ActualTask () {
      current = -1;
      statMessage = "";
      resultStream = AIUtil.getInputStreamFromEncZip(cryptedFileNameAndPath); //here the decryption happens
      current = 0;
      statMessage = "";
}The code that calls decryption and displays waitWindow
      final WaitSplash wS = new WaitSplash("Please wait...");
      final DecryptFile cryptedTemplate = new DecryptFile (this.templateFile);
      cryptedTemplate.go();
      while (! cryptedTemplate.done()) {
        try {
          wait();
        } catch (Exception e) { }
      this.templateInputStream = cryptedTemplate.getDecryptedInputStream();
      wS.close();Thanks, thanks, thanks in advance!
Edoardo

Maybe you can try setting the priority of the long-running thread to be lower? so that the UI will be more responsive...

Problem with threads in j2me

im using jdk 1.6 with java wtk 2.1
ya i know..
2.1 is a jdk1.4 source
but im using souce as 1.4 during compiliation so thats not the prob
this is my code
package org.learn;
import javax.microedition.midlet.MIDlet;
import javax.microedition.lcdui.Alert;
import javax.microedition.lcdui.Display;
public class thtest extends MIDlet
Thread t;
public void startApp()
Alert a=new Alert("hello");
a.setString("hello");
Alert b=new Alert("world");
b.setString("world");
Display d = Display.getDisplay(this );
d.setCurrent(a);
t=Thread.currentThread();
try{
t.sleep(10000);
catch (Exception e){}
d.setCurrent(b);
public void pauseApp()
public void destroyApp(boolean unconditional)
its just supposed to pause between the alerts using threads
however when i run it using the wtk, the emulator run properly but when i launch the app, it stops executing giving me this:
"Error verifying method org/learn/thtest startApp()V
Approximate bytecode offset 49: Inconsistent or missing stackmap at target
%the stack info%
Execution completed.
437782 bytecodes executed
9 thread switches
486 classes in the system (including system classes)
2506 dynamic objects allocated (73832 bytes)
2 garbage collections (60652 bytes collected)
Execution completed.
437782 bytecodes executed
9 thread switches
486 classes in the system (including system classes)
ALERT: java/lang/VerifyError: org/learn/thtest.
2506 dynamic objects allocated (73832 bytes)
2 garbage collections (60652 bytes collected)
please can someone help me out with this, is it an error on my part or do i have to set some option.

Hi gandalf123,
First, Thread.sleep is a static method, so you don't need to create a Thread object to use it.
I think the problem is due to the fact you don't preverify your midlet.
More over, you don't need to double post your question.

Problem with threads and camera.

Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while((!performing.isShown()) && (backgroundCamera.isShown())){
                    Thread.yield();
                notifyAll();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    this.wait();
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?

Hi,
I've finally managed to work this fine.
The code:
       Object o = new Object();
       display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while(!performing.isShown()){
                    Thread.yield();
               synchronized(o) {
                  o.notify();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    synchronized(o) {
                       o.wait(1);
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();

PROBLEMA DE CONECCION

Similar Messages

Maybe you are looking for