Problema en instalacion del CS3

Hola a todos,
desde hace meses he tenido el mismo problema. Tengo instalado Illustrator, Photoshop CS2, DWstudio 8, Premiere Por 2.0 y por ultimo Flash CS5. Bueno el problema es que cuando la instalacion del CS3 esta en progreso, pide insertar el disco 4, (cs3 es nada mas un disco). Ya disinstale todos los productos Adobe y comenze a instalar las versiones nuevas y las previas respectivamente y sigue dando el mismo mensaje, Insertar disco 4.
Alguien sabe porque CS3 pide mas discos de los que son?
Gracias.

Prueba esta solución
http://kb2.adobe.com/cps/407/kb407277.html
Pero en resumen, siempre hay que instalar primero siempre la anterior CS3, y luego la más moderna, posiblemnete tengas que empezar de nuevo, desinstalando ambas y luego empezar con la CS3.

Similar Messages

Problems Re-Installing Adobe CS3 Illustrator

Hello,
I was having problems with Adobe Illustrator CS3 and Acrobat. Specifically making pdfs from InDesign (which contained illustrator eps). I took out my Illustrator CS3 preferences and threw the application in the trash. Now, even though I purchased the Adobe Creative Suite 3 Design Premium, I can't re-install Illustrator. I have a job that must go out on Monday and need to get this fixed. Adobe Photoshop works fine and so does InDesign. Acrobat is still problematic. I believe this Adobe Creative Suite Design Premium is an upgrade from a CS2 Premium. I no longer have the CS2, having thrown it away.
When I try to install Illustrator off my CS3, the application seems to be working for a while, then it asks me for a CS4 disk (which I don't have and never purchased).
Can someone please help me?
Best,
Roshi33

Hi
Please follow the link as
http://kb2.adobe.com/cps/406/kb406294.html
This is the generic troubleshooting document please follow the same in case any issue write us back
Thanks and regards
Vipin

Con apple hardware test rilevo questo errore nella memoria 2MEM/1/4 DIMM1/J4001/1/ e qualche altra volta 2MEM/104/4 DIMM1/J4001 ritengo siano problemi ad una delle memorie ram aggiuntive. che debbo fare ? è da sostituire? o c'è un modo di escludere l

con apple hardware test nel mio IMAC G5, rilevo questo errore nella memoria 2MEM/1/4 DIMM1/J4001/1/ e qualche altra volta 2MEM/104/4 DIMM1/J4001 ritengo siano problemi ad una delle memorie ram aggiuntive. che debbo fare ? è da sostituire? o c'è un modo di escludere il o i banchi di memoria interessati?

Problemas con la instalacion del Xl Report.

Estimados:
Tengo un cliente con SAP 2005 A SP 01 PL 34 y SQL Express. Como desea migar a SAP 2007 A fue necesario cambiar el SQL Express por SQL Server 2005.
Este cambio se realizo sin desinstalar SAP, respaldando las bases de datos, inclusive la SBO-COMMON.
Cuando se instalo el nuevo SQL, se cambio el nombre al servidor.
Una vez lista la instalación, se cargaron las bases de datos respaldadas y no tuvimos problemas con SAP.
En SAP estaba instalado el addons XL Report, pero al querer iniciarlo este envió un mensaje de error, en el cual indicaba que no encontraba o existía el nombre del servidor del SQL antiguo.
Debido a esto se decidió desinstalar el XL Report para reinstalarlo.
Al hacer este proceso el problema suscitado es que no lo instala y por lo tanto no lo inicia.
Es importante señalar que al momento de instalarlo no envía ningún mensaje de error, e inclusive dice en la parte inferior de la pantalla u201CAddons instalado con éxitou201D.
El cliente realizara la migración en un par de semanas mas, por lo tanto debo dejar funcionando el XL Report en estas condiciones.
Alguien sabe porque ocurre este problema y como se soluciona?
Agradeciendo de antemano el apoyo, les saluda
Viviana Medina.

Tienes que eliminar en el sql el inicio de sesión xlruser y la base de datos ixmetaSbooem y proceder de nuevo a la instalación del addon desde el inicio.

Cambio de idioma predeterminado en la instalacion del acrobat 9.0 professional

LA INSTALACION ES DESATENDIDA Y HEMOS UTILIZADO EL ADOBE CUSTOMIZATION WIZARD 9.0
NECESITAMOS CAMBIAR EL IDIOMA DEL INSTALADOR DE ACROBAT 9.0 PRO.
EL INSTALADOR DE ACROBAT ES EN ITALIANO ESPAÑOL HOLANDES Y PORTUGUES
POR DEFECTO LA INSTALACION NOS LA HACE EN ITALIANO Y NECESITAMOS QUE LA INSTALACION POR DEFECTO SEA EN ESPAÑOL.
DESPUES DE HABLAR CON VOSOTROS NOS COMENTASTEIS QUE UTILIZARAMOS EL ACROBATUPD913_ALL_INCR.MSP PARA CAMBIAR EL IDIOMA POR DEFECTO.
PERO NOS DA EL SIGUIENTE ERROR
EL SERVICIO DE WINDOWS INSTALLER NO PUEDE INSTALAR LA REVISION DE ACTUALIZACION PORQUE NO SE ENCUENTRA EL PROGRAMA QUE SE ACTUALIZARA, O BIEN PORQUE LA REVISION DE ACTUALIZACION ES PARA OTRA VERSION DEL PROGRAMA. COMPRUEBE QUE EL PROGRAMA QUE DESEA ACTUALIZAR ESTA INSTALADO EN EL EQUIPO Y SI DISPONE DE LA ACTULIZACION CORRECTA.
HEMOS COMPROBADO QUE NO HAY UN ACROBATUPD PARA ESTA VERSION.
NECESITAMOS SOLVENTAR EL PROBLEMA YA QUE ESTAMOS ATASCADOS.
UN CORDIAL SALUDO:

Consulta por favor este documento:
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
Confirma por favor que resuelve tu problema y marca como contestada tu pregunta para facilitar su consulta a otros usuarios. gracias.

Problema iniciar Premiere Pro CS3

El problema que tengo es al iniciar Premiere Pro CS3, lo que hace es cargar todo lo necesario y cuando esta por aparecer la pantalla principal del programa, se cierra el programa y no me da ni un error. Vengo trabajando hace rato con el programa y es la primera vez que me sucede esto. Espero ayuda, gracias.

Hola a todos, creo tener la solución a la pantalla azul al iniciar Premiere Pro, el problema parece estar en los drivers de audio de Realtek, los anteriores a la versión 5.10.0.5299 no son compatibles con el nuevo Premiere, yo tengo un portatil Acer Aspire 5670 con un driver versión 5.10.0.5191 que es el original que figura actualmente en la página de Acer y tenía el famoso problema de pantalla azul, descargue de la página de Realtek (www.realtek.com.tw) la última versión de drivers que es la R1.72 en el siguiente enlace:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Co nn=3&DownTypeID=3&GetDown=false
y el problema se soluciono, la versión de driver que tienen en su máquina la pueden ver haciendo click en: inicio/panel de control/sistema/administrador de dispositivos/Dispositivos de sonido, video y juegos/Realtek High Definition Audio/controlador, después de instalar el nuevo driver debería quedar con la versión 5.10.0.5449 o superior y el problema de la pantalla azul solucionado. Espero que tengan suerte.

Problem installing Adobe Photoshop CS3 Trial

When installing the trial version of Adobe Photoshop CS3, I get an error message saying that there has been a "fatal error". What is the problem? I have re-downloaded the exe more than once, closed all programs, etc.
Thanks for any help.

This is a
user to user forum, you need Adobe
In the US - Adobe Install Problems 800-642-3623

Officejet Pro 8500 A909g Scan-To-Network-Folder Problem On New Dell Optiplex 3020

I hope that I am posting this issue to the correct board.
I recently purchased a Dell Optiplex 3020 64-bit desktop running Windows 7 Pro. My home network now has the old HP printer and my original 2003 vintage Sony Vaio XP Home 32-bit on wired connections. There is also an HP Notebook 64-bit running Windows 7 Home, using a WiFi connection. I replaced a Linux clone (which had connected ok to the printer) with the new Dell on the same wired connection.
With the other 2 PCs, I was able to set up Scan To Network Folder using the original HP software with no problems. I used a current setup file from the HP site to set up the Dell. The file is: "OJP 8500vA909_Full_14 HP Webpack". The Dell prints fine, but when I try to set up the network scan folders on the Dell the setup stalls and I get a request for an SSL certificate. I don't know if this is being generated by the OS or by the HP setup file that I downloaded. I can't figure out how to get the network folders to work on the new Dell, and I know next to nothing about SSL.
To be clear, the old Sony is a 32-bit Windows Home Edition, the HP notebook is Windows 7 Home 64-bit, and the new Dell is Windows 7 Pro 64-bit. Any suggestions will be appreciated. Sometime soon, the Sony will be retired and the OS environment will become much simpler.
While I'm at it, I probably should update the printer firmware. However, my guess is that I should wait to do that until the old 32-bit Sony goes out to pasture.
TIA for any advice and suggestions.

Hi Alla-guy,
As far as I know, you have posted your issue to the correct board, now let us see what we can do to get it resolved
I will answer your easier question first, in regards to the firmware. You can update the firmware whenever you are ready! You don't need to wait for the other computer to reach it's end, as the firmware is just within the hardware of the printer and shouldn't affect anything software wise on the computer, so go ahead and update the firmware when you have a few minutes!
As for the setting up to scan to a network folder, it is odd that it's asking for SSL, do you know if you're the administrator on the new computer?
I realize the instructions in this Set up and Use Direct Digital Filing for Windows document are for setup, but still have a look and make sure that is how things were going for yourself. Also, it may be a good idea to check any firewalls or anti-virus that you have and temporarily disable any firewalls or programs that could be blocking things over the network.
Let me know how this goes for you!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Windows 8.1 recovery problem and install dell backup and recovery software...

i had upgrade my windows to 8.1, the problem is that i cant install Dell backup & recovery, when i installing and updating PE I get FACTORY SETUP ERROR 5
is there any technical help me please...thx
however...its cant recovery or reset my laptop back to factory image...
just like this photo...
recovery cant... refresh also cant...

Same problem here: windows 8.1, dell backup and recovery 1.6.2.4. During the installation, when the box of "updating PE environment" appears, i get "factory error 5"
Is there any solution?
Regards

Problem with a Dell Monitor - stopped working yesterday, just a flashing orange light. Monitor or Mac Mini issue?

I've been using an old Dell monitor with my Mac Mini ever since I got it, however yesterday evening my monitor stopped working - however I'm not sure whether the issue is with the monitor or the Mac Mini. It just doesn't seem to respond when I try to bring the Mac Mini out of sleep. I can hear that the Mini is responding to the keyboard - I hear the right noise for pressing return on the password box without entering anything.
I've made sure all the cables are plugged in properly (power & connection to the Mini), but all I'm getting is a flashing orange light on the monitor.
I don't have anything else to test the monitor on, nor do I have access to another monitor to plug into the Mac Mini - I only have an old iBook G4, so don't have the right adaptors to plug the VGA from the monitor into that.
So before I run out and buy a new monitor, what is the best way to determine where the problem lies.

Hi, I've actually never had any issues waking this monitor from sleep, this is the first time that it has been unresponsive and I've had it for years - probably over 10! (E151FP) so probably overdue for replacement.
To be honest I'd rather not just switch the Mini off unless it's a last resort given that other than the lack of a picture everything else seems to be working ok - still hearing all the normal noises of Skype, Mail and TimeMachine etc.

Problems connecting a dell u2412m to a macbook pro?

I connected my new MBP to a Dell U2412M that I used on my PC. I used the VGA port on the Display and adapted it to the MBP via DVi port. The display seems connected to the MBP as the cursor works the only pic I get is the screen saver. Any one else have a similar problem?

If you are getting a picture of any kind, your display is working as designed.
The default is to add the second display to an "Extended desktop", and allow the mouse to move across both displays, dragging a window if you wish. Everything in the Arrange pane is moveable, so the displays can be moved in any contiguous orientation to each other and the menuBar can be dragged to either display as well.

Capture Problems - Prem. Pro CS3

Hi there,
been trying to upload some footage for a few days now, but with no luck. Basically, when connecting my camcorder (Panasonic NV GS300) the computer makes the beep noise it makes when a device is connected, a few seconds to a minute pass and then it beeps again and the device can't be found on the computer. In the the little bit of time the computer recognizes the device I try and load up the capture screen in Premiere, which crashes Premiere until the computer looses the device again. In Device Manager the camera appears for a brief amount of time, but vanishes quickly.
I have tried changing Firewire ports (I have two seperate ports on my PC) and bought a new cable today, but the problem is still presenting itself. I'm guessing the problem may lie in the camera or PC, but am not sure.
Any help?

HI,
I use CS3 and have a firewire 400 and 800 card to capture video from mini DV...which I think your camera is...and if you use it like a playback device ( the camera ) you can capture your whole tape in real time to your hard drive ....using that ScLive program...
There were problems making the connection between the computer and camera ( playback device ) using CS3 capture.
The ScLive program for capturing somehow made it easier to deal with the mechanics of my computer system...
There's no guarantee that ScLive would work either...but it did for me and thought I'd mention it...
Good Luck !
Rod

Problems shutting down illustrator cs3

greetings -
just curious if anyone else has had issues w/ illustrator not shutting down (i.e., file/exit). i have yet to attempt an uninstall/reinstall since it took a long time to install cs3 on my machine the first time (had to restart it once).
about 9 out of 10 times when exiting illustrator, it will freeze up, and i have to do a "ctl+alt+delete"" to terminate the process.
any thoughts are appreciated.
- c

I've been having this daily problem of this 'hanging-on-quitting' problem, too, until I saw this first post (recently, always searching for solution thru other forums as well) and thought that what might be the problem..., often times I would just quit by clicking the Close button, too. For a while, it did work (if I'm using Illy for short period of time) it doesn't hang - but if I would keep it up & work with it for a long period of time, then on quit (even with the File>Exit method) it'll go blank & 'hang' (again). I'm "wild-guessing", but could it be something to do with application's cache/memory issue? I mean, its seems like the more I use it, the more it keeps "building-up inside" so to speak. Also I agree whole-heartedly with JET's post #29 (under "New to Illustrator - all I want to do is draw a triangle") concering the "inelegance" of Illustrator, etc. He really said it well. It seems that each Illy's "improvement" is two-steps-backward at the same time. Very frustrating! I have Windows XP SP2 on two different machines. I hope this post would help to bring out any other thoughts or ideas on this annoying issue.
David Cripe

ITunes 8.1 Causes Major Problems on 2 Dell Systems

No problems with version 7 or 8.0. Upgraded to version 8.1 on two different Dell XPS desktops. On one, both internal cd/dvd drives are no longer recognized (they are shown as not working in device manager). On the other system, two USB ports are immediately disabled (again, shown as not working in device manager). The first system is about 4 years old and is 100% Intel while the second system is two years old and uses Nvidia mobo drivers with the Intel chipset. I always keep current system drive images (Acronis) and was able to recover by reverting to the earlier image(s), but the problems can ALWAYS be reproduced by installing version 8 of iTunes.
This is a problem that should be addressed, don't you think? I can't possibly be the only one experiencing these issues - though many others may not relate iTunes to hardware problems. And is there no way to get Apple Support to respond to thesye types of problems?
Message was edited by: Allan Grossman
Message was edited by: Allan Grossman

I uninstalled iTunes on an XP Pro SP3 system. The OS failed to recognize the CD with an error code 39 "The driver failed to load" etc.
I found and successfully implemented the following solution at this link:
http://www.geekswhoknow.com/articles/top10_dvd_and_cd_driveproblems.htm
It was problem #5 in their list.
5. Problem: XP - Cannot access the CD or DVD drive after an uninstall.
a. Start Registry editor as in Step 4 (just start regedit)
b. Locate MyComputer and then HKEYLOCALMACHINE
c. Expand System->CurrentControlSet->Control->Class
d. Click the subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
e. In the right pane, choose UpperFilters (ignore UpperFilters.back entry if present)
f. On the Edit menu, click Delete
g. Similarly delete the LowerFilters key in subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
h. Exit Registry Editor
i. Restart the computer
j. If the CD recording program does not work, re-install it and try again.

Problem when launching Photoshop CS3 in OSX 10.5.1 (Leopard)

When I launch Photoshop CS3 it quits and a message comes: "can't launch Photoshop because file is locked. Go to 'File' > 'Get Info' and unlock the file". But the file is not locked. Any idea? Thanks.

Thanks for your comments. I tried to look for the locked file but I didn't succeed. In the Console message is:
"03/12/07 21:30:11 [0x0-0x5f05f].com.adobe.Photoshop[998] file://localhost/Applications/Adobe P"
I can't find where the problem is. (And can't work with CS3 on Leopard).
Thanks for your help. Andy

Problema en instalacion del CS3

Similar Messages

Maybe you are looking for