Problema iPod nano 6g

Praticamente io ho il mio ipod nano touch di 6g, sino a ieri quando lo spegnevo, alla riaccensione spuntava il logo della apple, quindi si spegneva totalmente; adesso quando cerco di spegnerlo mi va in standby e quando lo riaccendo non spunta niente va direttamente alla schermata e per di più ogni minuto si accende da solo. Spiegazioni? Grazie in anticipo .

hai provato e tenere premuto per più secondi il tasto hold??perchè se lo tieni premuto per pcoo ti va in standby!

Similar Messages

  • Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!

    Hello people!
    I just found a solution to connection problems with iPod Nano 3rd generation when connecting it to a Windows Vista machine.
    Because of 'security reasons', Vista asks you to check the drive for errors when connecting the iPod.
    The thing to do here:
    Click the cross to exit the windows; DON'T CLICK 'do not check drive'!!!!
    So just click the red cross to close the window and the iPod should be recognized by iTunes.
    Symptoms:
    - iPod cannot be recognized by iTunes when you connect it.
    - iPod doesn't show up as a drive in Windows Explorer.
    I really really hope I solved your problem. Have fun!
    Jasper

    Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

  • Sound problem iPod Nano 5G

    My iPod Nano 5th Gen. has the  following problem: sometimes the sound gets weird (when the headphones  are on, when they're not, the sound is too low). The sound seems cracked  and muffled. The only way to make it work again is to squeeze the area  in the bottom of the screen, even thought sometimes it's difficult to  make it work again.
    This  started happening after I put the iPod in a shield case (made by  Belkin, which I believed to be a brand of trust when it came to device  accessories). The case was too tight for the iPod because it was  difficult for it to close. Even so, after I was able to close it, the  sound on the iPod wasn't working normally like it should so I took the  case off. The sound still wasn't ok so I found that way of squeezing it  in order for it to work again. I returned the case to the store.
    But  the problem seems go on again, specially after I turn it off (when i  press the play bottom on the click wheel for a couple seconds) and if I  use the click wheel with the iPod resting on a plain surface. I believe  this must be a connection problem between the device and the sound.
    I  would like to know if any of you ever had this problem, what else can I  do and, if there's nothing I can do to solve it, if you think that it's  worth repairing the iPod in an Apple support center (because, with the  experience I've had with another device that had a problem, sometimes  the price of repair is so high that it's cheaper to get a new device  instead of getting the actual one fixed).

    You damaged a connection on the logic board when you forced it into the case.
    You can make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement and while you are there compare yours to the 7th Generation Nano and decide whether you want to get it replaced or get a new one.

  • Hardware problem Ipod Nano 2gb

    Recently I've bought Ipod Nano 2gb in the US. Now I'm installing it. When i connect the ipod at the pc, i-tunes recognize it. When I disconnect the ipod, the ipod doesn't react. It shows the screen for choosing the language but none of the buttons react to change something. The hold button is off.
    I've already reset the ipod, without results. The Ipod shows that there are songs on it, and you can play the songs that are downloaded on it.
    The PC recognizes the ipod as a medium.
    Does anyone has a resolution to this problem ?

    Just to make sure...when you say turn...you don't mean physically turn do you? Even though you stated the hold button is off, toggle the button a few times to see if that helps. If you have tried going through all of the 5 R's and the click wheel still will not allow you to make any movement through screens, then you may want to contact Apple for a warranty replacement. Few more questions...does the back light turn on when you touch the click wheel? Do you hear any clicks when you run your finger around the click wheel? I know you said that doing this doesn't allow you to navigate through the screens but I'm curious if it reacts in any way.

  • Problem: iPod nano 4th gen & video podcast

    Hi ladies and gents!
    Just bought a brand new ipod 4th gen. mp3 playback works perfectly, but i experience the following problem when trying to watch a video podcast (the file is ok, it works under itunes on my macbook):
    my ipod (nano) plays the first seconds of the podcast, but after some seconds the video gets stuck and the ipod doesn't react anymore. i tried several times to play different video podcast. they all get stuck after a few seconds (randomly something between 5 and 30 seconds)
    Has anybody had the same problem
    and has found a solution?
    Otherwise i'll go back to the shop to change the ipod for another one :S
    Greetz
    Markus

    After leaving the iPod to charge for at least 30 minutes, have you tried resetting it?
    How to reset iPod
    B-rock

  • 2 problems, iPod nano battery depleted and not recognized by Windows, help!

    Earlier this morning. At first when I connected the usb to the computer I got the screen in the nano that said "apple.com/ipod/support" or something like that, with the folder/exclamation mark icon. It was charging but I disconnected it cause I had to go. I tried to do the same at night but this time is when it's totally dead, and not recognized at all. What can I do now?
    I havent used the nano in a while and the battery is depleted, so I tried to charge it but neither windows or itunes or the updater/restore recognize it.
    I'm on a laptop, I already tried most of the stuff in the faqs but it wont work.

    i kind of have the same porblem, my klaptop does regcognize the ipod on "my computer" but the iPod dosen't shows up in iTunes, and i have tried almost everything in the faq that show how to fix the problem, but it still dosen't work....

  • Recognition Problem, iPod Nano (2nd Generation)

    I am having problems syncing with iTunes:
    1.  There is no recognition from iTunes when the two are linked
    2.  The Nano content display, as a recognized device, is only:  Calendar, Contacts, and Notes.  The display on the Nano does not show these folders, but is much more extensive.
    3.  Also, I cannot transfer any of my music to the iTunes Library.
    So far, have uninstalled and installed:  iTunes, Apple Software, Apple Applications Support, and Quicktime.  The Window updates have been installed.
    Many thanks for any assistance. 

    Have you looked at this troubleshooting document? iPod missing in My Computer and in iTunes

  • Ipod Nano locked on iTunes

    http://i40.photobucket.com/albums/e205/simont13/***.jpg
    What happened is that it randomly locked my iPod Nano, I formatted it and now I can't put anything on it anymore, look at the picture please and tell me how I can fix my problem.
    iPod Nano   Windows XP  
      Windows XP  

    Welcome to Apple Discussions!
    That happens when your iPod is set to automatically update all songs and playlists or selected playlists.
    When iPods are set to manually manage songs and playlists, that lock goes away and you can drag the songs you want onto your iPod.
    To do that, connect your iPod to the computer. When it appears in iTunes go to edit-->preferences. Click the iPod tab, and then the Music tab under that. Click the bubble next to manually manage songs and playlists and click OK.
    See this for more info...
    Managing Your Songs Manually
    btabz

  • IPod nano installation problems with Windows Vista

    I purchased an iPod nano today and have not been able to install iTunes. There are instructions for Windows XP but not much help for Vista. As of right now I am very unhappy with my purchase and if I can't get help soon I am going to return it. I have heard so many good things about iPods but I haven't had any good experiences yet. Please help!!
    HP E6400   Windows Vista  
    HP E6400   Windows Vista  

    I, too, just bought my first ipod and have Windows Vista. I purchased songs through iTunes and tried to drag them to my ipod icon, but it said that I was not authorized on this computer! I called tech support for HP and they said it's a compatibility issue and to contact Apple about it to fix it. Before I do so, I am checking here first, just hoping there would be a really easy fix for this problem. I'm regretting getting Windows Vista now for many reasons, this being the latest. Any advice?
    HP Pavilion Notebooj   Windows Vista   2 GB ipod Nano

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • I have an ipod nano 6th generation and I am having serious problems updating it to version 1.2.

    Hi all,
    I just got myself an ipod nano 6th gen like in july and i love it. But i have been trying to download the update and it always says there is a error- the internet connection timed out yet i can be doing other stuff with the internet at that time, Facebooking, downloading, watching videos so it's not the internet and this has happened alot.
    When i first got my ipod, I was using a windows machine now i have a macbook and i wonder if that could be the problem because under format on the ipod it says windows...
    Has this happened to anyone else? I really need some help...
    Also, I have seen alot of complaints about the software update over the internet from other ipod nano users, if there is anyone who didn't get affected please let me know, I don't want to download it to only make my ipod act up....
    Thanks!!

    Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
    Try posting this one in the iTunes forum, they might have a solution for you.
    i

  • How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

    How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

    How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process? 
    You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings.  Then resync the iPod to see if any alerts appear.
    Is this the same computer you normally sync the Nano with?
    B-rock

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

Maybe you are looking for

  • Problem in accessing data to remote pc

    Hi, I have a problem on accessing file on the remote pc, im using coldfusion then im trying to get file from a remote pc but its not working im using cfdirecrtory can somebody help me in my problem please... Thanks in advance,, john

  • IMovie 09 deleting a project? Help please

    I am running iMovie 09 and am new to it. I created a movie using photos and videos. I first put it onto my flash drive when it was finished. I am planning on burning it to DVD's for my friends, so I have the file in a folder on my desktop. However, n

  • HTML tags in text-only e-mail notification (with HTML attachment)

    Greetings, Our "Purchase Order Review" e-mail notifications (as generated by the WF-Mailer) have HTML tags in the message body (which is "plain-text" text-only), with an HTML attachment. (The attachment looks good, and is what we are expecting.) All

  • Cannot find class java/lang/Thread

    I'm getting this error trying to compile a program that I'm writing in java. Its a very simple program just to get me back to basics. Any ideas as to how I can fix this problem??

  • Panel Tabbed Inter-Region Communication - jdev 11.1.2.3

    Hello: I have a page with panel tabbed.  In each showDetailItem (TAB) there is a bounded task flow (BTF from ADFLib) that needs to receive employeeID. The employeeID is used as a bind variable for each VO query shown in the tab. When the user clicks