Problema para comunicar labview 2011 con un compact RIO 9074

Hola migos, el problema es que al abrir el MAX y busco en (Remote SYstems) no cargan los compacts conectados a la red. Alguien sabe si es un driver lo que hace falta
ya instale todos los drivers relacionados con los compcts rio que vienen en la pagina

Hola Lalo;
Para poder usar un compactRIO en tu máquina, debe contar con lo siguiente
NI LabVIEW
NI LabVIEW RT
NI LabVIEW FPGA
NI RIO (debe ser instalado después de LabVIEW)
Se recomienda que la PC tenga una IP fija y se encuentre en la misma subred que el equipo
Firewall de windows debe permitir la conexión (puedes apagarlo por un par de minutos para hacer la prueba)
Si cumples con todo lo anterior puedes agregar el cRIO de forma manual conociendo su IP; si no lo conoces, te recomiendo lo resetees según estas instrucciones
Exito en tu aplicación

Similar Messages

PROBLEMA PARA VER GALERIA CREADA CON BRIDGE

Buenos días a todos, es mi primera vez en un foro así que pido disculpas si me salteo algún paso.
He creado una galería web con adobe bridge. si la abro desde mi sitio local funciona perfectamente, pero cuando la subo al servidor no la puedo ver, la dirección aparece en la barra de direcciones pero no se carga.
Me podrían ayudar??
gracias a todos

Hola Fernando,
1. General: En todas estas discusiones en el foro, no se recomienda el uso de iframes en lugar de buscar una solución con CSS. Lo siento, sé que para el caso, sólo enlaces a sitios web en Inglés. Buenos sitios ejemplo, su origen puede ser utilizado como una plantilla, se encuentran:
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
y
http://alt-web.com/TEMPLATES/2-col-fixed-with-grid.shtml
2. Cómo agregar una galería de puente en el DW se puede encontrar aquí:
"Incorporating an Adobe Bridge Web Gallery into a Dreamweaver Page" http://foundationphp.com/tutorials/gallery/embed1.php
3. Lo que me sorprende es su fuente de esta pequeña diferencia:
Su texto:
<iframe name="cuadro" id="cuadro" src="Galerias_de_productos/G1/senpreventivo/index.html" width="900" height="580"> </ iframe>
Mi texto:
<iframe src = "........" name = "......." href = "1024 " marginwidth = "0" alt = "1200" marginheight = "0"align = "middle" desplazamiento = "auto" frameborder = "0" hspace = "100" vspace = "0" allowtransparency = "true"> </ iframe>
Para esto aún debe examinar más de cerca.
Hans-G.

Problemas para sincronizar mi ipad con mi nuevo iMac

Hola!
Me llamo Leticia y termino de comprarme un iMac y estaba intentando sincronizar mi ipad, la música concretamente, pero en el momento en que conecto mi ipad al ordenador, empieza a volverse loco y a no dejarme confiar en el ordenador, es decir: me aparece una viñeta que parpadea preguntándome si quiero confiar en ese ordenador, pero no me deja aceptar ni rechazar porque está intermitente... Ya he actualizado el IOS, ¿que puedo hacer?

Hola Leticia, aquí tienes algunas pistas:
Asegúrate de que los cables con los que estás conectando los dispositivos son originales de Apple, si lo son y tienes algún otro de repuesto, prueba con otro cable.
Actualiza tus dispositivos a la última versión (iMac 10.10.1 y iOS 8.1.2)
Introduce tu Apple ID en ambos dispositivos.
Si lo anterior falla, tienes aquí algunas otras pistas: can't connect to my macbook air to my ipad

Compact RIO EtherNet/IP Industrial Communication Data Packaging

Hello,
I’m new to the Industrial Communications for EtherNet/IP module and quite a few questions. I am using a Compact RIO 9074 I first configured the Compact RIO’s Ethernet Adapter eth1 port to TCP/IP Network and entered the static IP address to the same subnet as the Fanuc LR. This was then saved and deployed to the Compact RIO. I then implemented the VI for the Access Assembly Instance Data through Explicit Messages, built the application and deployed it to the Compact Rio. This VI was run and the system shows that its making a connection, however, it’s still not able to communicate.
In the example, there are two arrays, the Data Received, and Data to Set. I want to know if there’s a certain way of configuring the Data to Set to a scanner.
Thank you.
Thomas

Hi Jesse
Thanks for your information it was very helpful.
I thought that the IP address of the Compact RIO’s Ethernet terminal needed to be within the same subnet but not the exact same.
I agree with the Ethernet/IP having an address scheme laid out. Having a look at the example project, it claims I need to create the assembly instance. This can be done using the create assembly instance example VI.
Does the create assembly instance VI need to be running with the Assembly Instance Data (using Explicit Messaging)? If so I’m having difficulty understanding how to apply this. Under the create assembly VI, it uses I/O Data function, while using an array of Data to Set and Data Received. Will the assembly address need to be set up in this array?
I’m having a look through the manual for the Robot and the information I provided before is the configuration for the scanner.
Thanks
Thomas
Attachments:
Assembly Acess Panel.PNG ‏70 KB
Create Assembly Instruction Panal.PNG ‏71 KB
Create Assembly Block.PNG ‏35 KB

Comunicar sinamics g110 con Labview

hola amigos, estoy desarrollando un proyecto en el cual me interesa, controlar un variador de frecuencias Siemens Sinamics G110, cuenta con un protocolo USS (Propio de Siemens), si alguien ya ha trabajado con este protocolo anteriormente, o ya ha desarrollado algo parecido para ver cómo comunicar ambos, sería de gran ayuda.
Saludos y gracias.

Hola;
Por favor no coloques tu pregunta en más de un foro, dificulta la documentación.
http://forums.ni.com/t5/Discusiones-sobre-Productos-NI/Comunicar-sinamics-g110-con-Labview/m-p/28403...
Saludos

Labview 2011 64-bit install problem

I'm trying to install the 64 bit version of LabView onto a win7 64 laptop. The install seems to go ok. When I try to run it, it crashes with this exception 0xC06D007E$r. I've tried uninstall/reinstall and I still get the same error. I have the 32 bit version of LabView 2011 installed on this machine and it runs fine. What else should I be looking at?
Thanks
dp
Attachments:
lvlog.txt ‏2 KB

To address the point made by smercurio_fc, the Program Files (x86) folder is generally reserved for 32 bit applications. As I understand, Windows uses the distinction purely for organization. Having done more reseach, I will concede that we should look for a different workaround.
By your responses, it seems you may not need LabVIEW 32 bit. This article discusses the pros and cons of each version. This Q&A may be particularly useful in deciding whether or not you can continue on 64 bit alone.
Q. Which LabVIEW modules and toolkits are available for LabVIEW 64-bit?
A. Currently, the NI Vision Module, Application Builder, and Measurement Suite for Fixed WiMAX are available for use in LabVIEW 64-bit. Any other modules and toolkits must be run using LabVIEW 32-bit. See this Developer Zone Tutorial for more information.
Depending on your applicaion, this could be our solution If you are able to install LabVIEW 64 bit after uninstalling the 32 bit version.
KyleP
Applications Engineer
National Instruments

Librería Modbus para Labview 2011

¡Hola!
Tengo el Labview 2011 y quiero instalara la libreria Modbus. ¿Cuál de todas es la correcta? ¿La carpeta que dice 71, 82, 85, 86?.
Saludos.

hola
MODBUS Library for LabVIEW también es compatible con 2011
Reg

Conner LabVIEW 3.1 to LabVIEW 2011

Hi, I am a senior student in UT Arlington. I get a LabVIEW file from my professor. When I try to open it with LabVIEW 2011, it says VI version is too early to convert to the current version. LabVIEW load error code 10: VI version (3.1) is too old to convert to the current LabVIEW version (11.0.1 f2). I attach the VI with this message. I wonder if anyone can help me convert the VI from version 3.1 to the current version. I will be greatly appreciate it.
Attachments:
HP8510A.LLB ‏2811 KB

Hi everyone, im newest of this.
I have one problem with version 3.1 to version 7.1
Anyone can help me to convert an library of 3.1 to 7.1 or 8.5 or 2013?
Thats error said:
"An error ocurred loading VI verifiy information.vi.
LabVIEW load error code 10: VI version (3.1) is too old to convert to the current LabVIEW version (7.1)
Thanks to all.
Attachments:
ADVCLASS.LLB ‏1075 KB

Tengo problemas para comprar con mi cuenta dice q la informacion de mi banco es erronea, la corrigo pero continua diciendo lo mismo

Tengo problemas para combrar, please help

Hola, José Manuel.
Recibir una respuesta depende de que tu pregunta la lea alguien que sepa la respuesta (yo no sé la respuesta a la tuya). Según tu suerte, eso puede demorar segundos, minutos, horas, días o meses; e incluso no ocurrir nunca. Por tanto no te ayuda en nada repetirla.
De todos modos, suerte y que recibas respuesta pronto.

Labview 2011 on Win7, OS causing serial loopback message corruption when clicking on top of windows?

I'm wondering if anyone else has seen problems like this.
I've been tearing my hair out over debugging some code. I have a ftont panel, I'm using some LEDs to send messages through the NI RS232 cable I bought, and have connected with a connector in a loopback fashion.
I've been trying to read the incoming messages from loopback...and based on those, changing indicators and controls on the front panel.
I could not figure why values were changing at strange times....like T's were turning to F's (I'm working with the serial data as boolean arrays).
Well, I was simplifying code, and mostly running right...but every once in awhile, it appeared that my front panel indictors, especially the values I'm changing based on the loopback serial messages would *BLINK*.
I happened to be looking at the Probe Watch window...and I saw where my probes were correctly showing on a couple spots (a left and right indicator) TTTTTTTF and TTTTTTTF......these appear at times to change T's to F's and vice versa.
I then started clicking around...and found this is almost always caused, when I click the mouse on the top of the window...the part that you usually click and drag to move a window around the Windows desktop!!!!!!!!!!!!
I can see this happen when I click on ANY window on the Windows OS desktop!!!!!!
It appears that the OS is messing with me..............?
I'm using Labview 2011, 32-bit on Win7....I believe the OS is 64 bit.
Has anyone seen behavior like this before?
Thanks in advance,
cayenne

Matthew Kelton wrote:
When you are probing, are you looking at the actual spot where you are getting your serial data, or are you looking at it after you've done some processing? I would look at the actual raw data and use a serial port capture utility (there are several free ones on the internet) which will confirm your data is coming in correctly.
What is your CPU running at? If it is pegged at 100%, something has to give.
Is your entire VI running in the UI execution system? If you post your test code, it sounds like it would be easy enough for someone to do a loopback test of their own to confirm similar behavior.
Thanks for the reply. No, CPU isn't being hardly used at all...this is a new lenovo laptop.....high end Dell U2711 monitor...
Task Mgr while Front Panel running:
I'm looking after I've done some processing....
I'm new to working with serial port stuff....I don't have a serial port capture device...?
Thing is...when I run this in debug with breakpoints and stepping through...I don't see this happening. But when running at full speed, and especially when I click on any of the open windows on my desktop, along the top margin where you would click and drag a window around...I can see the serial data in the probe jump...and all data going through the serial port and being displayed on the front panel changing values...
On my VI, I'm actually constructing the byte string...sending it through the serial loopback, and receiving it and acting on it. I can see the data going in is the same as is coming out...it just seems to quickly corrupt and then come back again...like maybe it is getting interrupted by the Win7 OS....?
I can't really post the whole code here...proprietary stuff...that's why in the past, I was posting a separate, simpler vi with only the parts I was having problems with....
I think I have full support with NI...I wonder if I could send them the code to look at, with more confidentiality...?
But again, I can make the problems happen, when it and the probe window is open, in real time...by clicking on windows.
Also, this tends to explain problems I saw earlier...when running slow, all was well , when debugging with break points and stepping through. But at full speed, unexplained...things would start resetting without explanation...and without regularity.
C
I"m not sure what you are asking with "Is your entire VI running in the UI execution system?"....I have the one vi running, and only that vi is running.....

Problem on WinXP / Labview 6.1 with VISA (serial port)

There is a problem on WinXP / Labview 6.1 with VISA which i use to poll the state lines of the serial port. The only functions that i use are "VISA Open", "Find Resource", line state properties and "VISA close".
On my own machine (WinME) it works fine as a standalone application (with runtime engine in the same direction), even if i rename the Labview directory so that Labview is not found.
From my VXIpnp directory i deleted all but these files:
directory "Win95",
subdirectory "Bin" containing "NiViAsrl.dll",
subdirectory "NIvisa" containing "visaconf.dll".
When shipping this to WinXP (and copying "VXIpnp" to the root directory), the serial port was not found, so i renamed the direction "Win95" to "
WinNT", but this did not work also.
I installed the VISA server, although it seems not to be required -- no result.
Final question:
What must i do for distributing the program as a standalone application for all windows platforms?

Hey Joachim,
In order to create an installer that includes the VISA Run-time engine for serial IO you will have to purchase LabVIEW 7.x. See screen shot. This packages a small compact version of the run-time that can only be used for serial, but it takes up much less space. The installer that I created has my application, the LV Run-time, and the VISA run-time and it is about 26 MB.
That is much smaller than if I had to include the 32 MB LV 7.1 run-time and the 14 MB VISA run-time separately. It would have been even smaller if I would have uncheck some of the items that I wasn't using.
-Josh
Attachments:
advanced.JPG ‏31 KB

Process Failure when communicating over MODBUS using LabVIEW 2011 and DSC

I'm currently trying to read from a PLC's holding registers using MODBUS/TCP. I've confirmed that the PLC is updating the values and responding to MODBUS communication correctly using a third party program called Modbus Poll. However, when I try to poll the PLC using LabVIEW's shared variable engine, I am unable to read any values from the same addresses that I'm viewing with Modbus Poll.
My setup simply consists of a PC connected directly to the PLC over Ethernet, with no router in between. I am using LabVIEW 2011 SP1 with the DSC module.
I opened the NI Distributed Systems Manager to view the status of all shared variables in the Modbus library that I created and I've noticed that the CommFail bit is permanently set to "true". All other variables with a "read" access mode report "Process Failure". I've tried restarting the process as well as stopping and starting the local variable engine with no success. I've also restarted my computer several times to see if any services were failing, but this does not seem to have fixed the problem.
I finally resorted to monitoring communications over the network card that I have the PLC plugged into via Ethernet using Wireshark and I've found that while Modbus Poll is communicating with the PLC, many MODBUS and TCP packets are sent and received. However, when solely using LabVIEW or the NI DSM to communicate with the PLC, there does not appear to be any communication over the network card.
Something that may be worth noting is that I was able to communicate with the PLC and read values from it with the DSM on just one occasion, when I first figured out which addresses I should be reading from. It all stopped working shortly thereafter. Prior to this, "CommFail" was not usually set to "true" with my current configuration. Thinking that it was my firewall, I have since turned my firewall off, but this seems to have had no effect on the problem either.
Any help on this matter would be appreciated.
Solved!
Go to Solution.

Just a thought but I think the register addresses used by LabVIEW are one off of the actual register #. I was using a CRIO as a modbus IO Server and had to shift the register addresses by 1 to get things to work correctly (can;t recall if it was +1 or -1). This is documented somewhere on ni.com but can;t seem to find it now. But here is another link that may help:
http://zone.ni.com/reference/en-XX/help/371618E-01/lvmve/dsc_modbus_using/
Dan

Problema para arrancar lenovo b590 (UNMOUNTABLE_BOOT_VOLUME)

Hola a tod@s,
de buenas a primeras, mi lenovo b590 no arranca, ayer funcionaba perfectamente, y hoy al intentar iniciar me ha salido un error de un "servicio" que apenas me ha dado tiempo a leer cuando se a reiniciado el portatil. Tras esto al intentar arrancar el sistema operativo el lenovo se quedaba colgado apareciendome la pantalla azul de la muerte con el siguiente mensaje: "UNMOUNTABLE_BOOT_VOLUME" (windows 8.1)
Tras esto el PC se ha quedado pegado (ya van 6horas) en la pantalla de "Intentando realizar reparaciones".
He buscado información sobre el tema pero no veo nada que se asemeje a mi caso, ya que la verdad, ni siquiere se porque aparece este error de la nada, tengo miedo de perder datos importantes ya que la ultima copia de seguridad la hice hace 1mes. Destacar que estoy de exámenes y necesito el ordenador para realizarlos.
¿Algun usuario de este foro me podría aconsejar sobre este problema o que debería de hacer?
Si conoceis algun hilo de este tema se agradecería que lo compartieseis.
Ante todo, gracias por vuestro tiempo
P.D : no tengo disco de inicio
¡Resuelto!
Ir a solución.

Claro puede conseguir la imagen de Windows 8.1.
Usar el recovery es una especie de formateo te deja el ordenador como si fuera la primera vez que lo enciendes, pero te dejaría con Windows 8 y eliminaría todo en C, a través del botón Novo, el proceso de recovery se debe realizar con mas del 50% de carga y conectado al cargador.
Punto anterior en Windows es el que tu has creado puedes volver a el desde el disco de rescate de Windows, desde Windows 8 en adelante también podrías regresar a Windows de fabrica.
Instalación limpia me refiero a una nueva instalación de cero en la que cargas un dispositivo extraible con la instalación de Windows.
Puede ser sobre lo de la descarga esta era un archivo que necesito algún parche?
Entiendo suele suceder el problemas relacionados a mal arranque con Windows.
Inicio seguro sigue disponible solo se debe usar un USB de rescate y realizar ciertos pasos, lo ideal seria utilizarlo no desde Windows si no como esta disponible antes y no como esta configurado a partir de WIndows 8, pero en tu caso no creo que sirviera de mucho.
Sobre la opción de BIOS me puedes comentar que has echo hasta ahora? si se podría entrar pero ver que sucede pero no se mas detalles.
Para cargar algún disco de Windows 8/8.1 presionar F12 o Fn+F12 y escoger tu lectora, para entrar a BIOS a través del botón Novo o F2,Fn+F2 al encender el ordenador.
Esta disponible lo de rescatar tu información con Linux no es complicado y proceder a realizar una nueva instalación.
Te dejo algunos recursos:
Conseguir una imagen de Windows https://forums.lenovo.com/t5/Windows-Base-de-conocimientos/Crear-medios-de-instalaci%C3%B3n-Windows-...
Instalación de cero https://forums.lenovo.com/t5/Windows-Base-de-conocimientos/Instalaci%C3%B3n-de-Windows-8-1-de-cero/t...
Botón Novo https://forums.lenovo.com/t5/ThinkStation-ThinkServer/Bot%C3%B3n-Novo/ta-p/1791535
Un saludo.
@Antony_Vamu
Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

How to start an 8.2 app in LabVIEW 2011

This has been a problem that I've been trying to deal with for the past week to no avail.
In short:
The 8.2s which worked on an XP machine were openned on a Windows 8 with LabVIEW 2011, made into an executable, put back on to the Windows XP to see if it will still all worked, and it does not.
In detail:
I had a ready made, working application made in LabVIEW 8.2. The goal is to update all old software to the new LabVIEW 2011, but to still make it work. The problem is, after making it run in edit mode for at least a little bit (after debugging common errors with openning in a newer version), after making an executable and putting it on the machine it used to run on, it won't run. The program will not communicate with the machine and will give the following errors which are, my eyes, things that should not be happening after working in edit mode.
Two error codes received:
1) One or more Configuration File(s) are not available. Please Check the Hardware configuration!
2) {
Error 7 occured at Openfile+.vi: Open file
Possible reason(s):
LabVIEW: File not found. The file might have been mover or deleted, or the file path might be incorrectly formatted for the operating system.
For example, use\ as path separators on Windows, : on Mac OS X, and / on Linus. Verify tht the path is correct using the command prompt or file explorer.
=========================================
NI-488: Non-existent board.
Please, if anyone has had the same or a similar issue and can give any sort of feedback or thoughts, I would greatly appreciate it. Thank you!
-Hub25

Bob_Schor wrote:
There are a number of issues here. First, LabVIEW 8.2 cannot be installed on Windows 7 (to say nothing of Windows 8), and LabVIEW 2011 cannot be installed on Windows XP. I'm not sure whether executables can be built across Windows 7/XP boundaries, but I'm pretty sure that, at a minimum, you'd need to install the LabVIEW 2011 Run Time Engine on the Windows XP system (and I don't know if this is possible).
After next April, Windows XP "turns into a pumpkin" as Microsoft drops support for it. A good time to migrate to Windows 7!
You can install LabVIEW 8.2 on a Windows 7 computer. I have that right now specifically for converting old code. And I am sure LabVIEW 2011 can go on XP as well.
I'm guessing the main issue is the lack of the 2011 Run-Time Engine on the XP machine. But I would also advise moving away from the OpenFile+.vi since that is a really old VI and the newer LabVIEW file I/O primitives are so much better anyways.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Labview 2011 save for previous version crashes

Hello,
I am trying to save an existing Labview 2011 project to any previous version. I have tried 2010 all the way down to 8.0. I have a clean project, all files are LV 2011, it builds and runs correctly. I have mass compiled. It did call 2 dynamic vi's but I have removed those. The project did contain conditional compilation, but that is removed. It did contain disabled diagrams, but they are removed. I did a save hierarchy to a seperate folder, just to make sure the standard save works. It does. There are 1196 vi's and controls in the project.
If I save to LV 2010, quite a number of sub vi's are saved (909 including controls), but none of the top level ones. The crash is manifested by Labview leaving memory (task manager doesn't see it any more) and the Labview window dissapearing.
Attached is the save dialog at the instance before crashing.
I have not been able to locate a log to let me know the last loaded vi. If you know of such a log, please let me know.
Has anyone experienced similar problems? If so, any clues on how to fix this?
Thanks,
Bart Schroder
Attachments:
LV2011 save crash.jpg ‏17 KB

BartSchroder wrote:
I have not been able to locate a log to let me know the last loaded vi. If you know of such a log, please let me know.
In the advanced build configuration, check "generate build log file". See if you get more information. Good luck.
Quote from the help:
Generate build log file—Specifies whether to create a log file for the build. The build log file lists all files contained in the build, including subVIs you do not specify as Startup VIs or Always Included. The log file also contains general build information such as build start and end time, the build specification and project name, and any errors that occurred during the build.
LabVIEW Champion . Do more with less code and in less time .

Problema para comunicar labview 2011 con un compact RIO 9074

Similar Messages

Maybe you are looking for