Проблема подключения через кабель - Trouble connecting via cable

Доброе время суток.
проблема состоит в том, что после переустановки ОС (win7) не могу больше подключить t410 2518 к sony playstation 3 через кабель программой FileZilla Client
до переустановки ОС вводил только 100.100.10.10 и работало, ныне не видит приставку.
В диспетчере устройств и в solution center пишет что нет драйверов для:
- PCI-контроллер Simple Communications
- Основное системное устройство
- Последовательный порт PCI
где их брать и\или что сделать для того, что бы я смог через кабель подключиться к другим устройствам.
Google translation:
"Good time.
the problem is that after reinstalling the OS (win7) can no longer connect to the 2518 t410 sony playstation 3 via cable program FileZilla Client
before reinstalling the operating system introduced only 100.100.10.10 and worked, now does not see the console.
In Device Manager, and solution center says that there are no drivers for:
- PCI-Simple Communications Controller
- Base System Device
- PCI Serial Port
where to take them and \ or what to do so that I could connect via cable to other devices."
Moderator comment: Please do post in your native language, but as the principal language of this community is english, please also provide a translation so that members may assist you. Hopefully, the Google translation provided above is adequately accurate.
Модератор комментарий: Пожалуйста, пост на вашем родном языке, но так как это основной язык этого сообщества является английский, просьба также представить перевод так, чтобы члены могут помочь вам. Будем надеяться, что перевод Google Приведенную выше адекватно точным.
Solved!
Go to Solution.

Thank you, I made it )

Similar Messages

  • My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

    My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.  I get an error message with multiple suggestions but none of them apply to my situation.
    I am so dissatisfied with this printer.  I'm sorry I got it from Amazon because now it is a hassle to return it.  I will never buy another Canon.
    The printer menus are confusing.  I hate using it.  I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model.  Never again.  Stick with cameras.
    Marcy Hotz

    This note won't be as angry and frustrated as the last one...
    Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer.  I deleted all the old stuff.
    I also had several scanning applications on my drive which just confused me.
    When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which).  So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
    It works now.  So I'm satisfied, will keep this maching.  I just had to take some time, sit down and focus on the problem.

  • Cannot connect via cable on Windows XP home SP2

    Good Afternoon,
    Maybe you can assist me here.
    I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
    In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
    The following is the steps I followed in both cases starting with XP Pro
    1. Installed Drivers
    2. Installed PC Suite
    3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
    XP Home
    Followed steps 1 + 2 in the same order
    3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
    At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
    I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
    Can you advise on what I can do.

    Hi
    Sounds lik ethe PC is having issues seeing it. Try this
    /discussions/board/message?board.id=pcsuite&message.id=11480
    Try this first:
    1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
    3. Select "PC Connectivity Solution", click "Change" and then "Repair".
    4. After Repair, restart PC
    music

  • Trouble connecting via SFTP today? Here's the fix.

    If you've been experiencing SFTP connection errors, make sure you accept the new terms of use as detailed here: http://www.businesscatalyst.com/bc-blog/trouble-connecting-via-sftp-make-sure-you-accept-t he-new-terms-of-use

    Have you tried connecting to other networks? When you click on the airport icon are there other networks available? If so try them.

  • WRT54GL connects via cable, but not wireless

    I've got a WRT54GL that I connected via the ethernet cable, but when I try to connect wirelessly it can't. I've tried EasyLink Connect and EasyLink Advisor to try and fix the connection and "unwire" it, but neither were any help. I can setup my other machines to connect wirelessly, but not the main machine that I used to setup the router intitially.

    Hi TWallace,
    Are you using cable connection (Comcast,Cox) or DSL connection (Verizon,Qwest)? Were you provided with a username and password by ISP. Since EasyLink Advisor and EasyLink Connect did not work. You would have to manually configure the router. Aside from that, make sure that when you ran either the 2 software (ELA or ELC) you do not have any firewall turned on. Firewall disrupts the connectivity of the device running the tool.
    Aside from that, when wiring your computer to the router and you've mentioned it works. Can you try to check the IP address? If XP, click Start > RUN > cmd, once command prompt pops up.. type ipconfig /all then look for IP address.
    Thanks

  • E55 fails to connect via cable or turn on Bluetoot...

    Good afternoon!
    I have the following problem with my E-55:
    I was often using the phone as a modem, connecting it with a cable and using Nokia Suite. Some 2 months ago the computer (and Nokia Suite) suddenly stopped recognising that a phone was connected (it remained undetected, although the battery was beginning to charge). But it was still connecting via Bluetooth.
    About a month later a problem emerged with the phone's memory. Although all apps were installed on the memory card, and text messages occupied some 300kB, NetQin Mobile Guard was only finding 4.5kB files to delete from cache and I was constantly receiving an alert about lack of memory. I couldn't send text messages (although I could receive them), add new contacts, edit calendar entries or change mailbox settings (the e-mail boxes were empty). I could still use the phone as a modem connecting it via Bluetooth.
    The day before yesterday, for the first time I couldn't turn on Bluetooth, but when I closed all apps (using NetQin Mobile Guard to do that), it worked.
    But yesterday it didn't. I did a hard reset. The phone is working, now has over 50MB free memory (compared with the mere few kB earlier). But it still doesn't connect with the computer via cable, and I still can't turn BT on (alert: Cannot carry out Bluetooth operation).
    1. What can be the reason?
    2. Can it be repaired? (I expect deep reset does the same as hard reset, so won't change much?)
    3. If not, is it possible to carry over contact and setting backup from Nokia Suite (in .nbu format; I expect it would have to be converted) into the phone and running it without connection with Nokia Suite?
    Loads of thanks in advance for your help!
    Cheers!
    -Mike

    Hi m_b_p,
    Thanks for your post!
    We're sorry to hear that your device has suddenly become unresponsive to activating the bluetooth. A wire connecting the bluetooth part to the phone may have been dislodges some how. As you have performed a hard reset, we suggest you to take your device to your retailer or Nokia Care Point to have it inspected. 
    You may need to bring a proof of purchase.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Does Time Capsule receive Wifi signal? or it must via connected via cable to a router?

    Hi everyone,
    I would like to know if the new Time Capsule 2TB receives wifi signal or if it must be connected via a cable to our router.
    Thank you so much,
    Regards

    The recommended connection method would be to connect to your modem or router as Apple illustrates in the Time Capsule Setup Guide
    However, if you already have another Apple router providing a wireless network, the Time Capsule can connect using wireless, and also "extend" the wireless signal from the main Apple router.

  • I tunes on my laptop will not find ipad wireless and I get error message if I connect via cable

    Itunes on my toshiba laptop ( running Windows XP) does not see my ipad via wireless network at home. If I try to connect via usb cable I get an error message. I have tried re booting both laptop and ipad and have recently loaded new itunes version.
    HELP PLEASE?

    Check this article: http://support.apple.com/kb/TS3221

  • Can't connect via cable, but wireless works.

    iMac, Leopard, iTunes, all current. AppleTV only shows up when I disconnect my ethernet cable. At that point my Airport base station (older version) makes the connection. If I turn Airport off in the OS, still no go. I've tried multiple cables too. I've also tried my Macbook pro.
    I obviously want the wired connection for greater speed and since the ATV is in the room right next to the computer it's no big deal to run a cable. I swear I had this all running correctly under Tiger, but now I'm starting to wonder if it had been wireless all along and I never realized it.
    Help!

    Hi,
    I had the same problem and this worked for me -
    Go to System Preferences/Sharing and enable "Internet Sharing" where it says "Share your connection from" choose Airport and where it says "To computers using" select the ethernet port that you've connected the cable from the ATV to on your computer.
    Go to System Preferences/Security/Firewall and if you've selected the last option "Set access for specific services and applications" add iTunes to the list by clicking the + and navigating to it.
    Regards

  • Trouble connecting via airport

    Hey everyone, so I am having trouble connecting to my wireless router. Everytime I want to connect I have to change my IP address, any solutions to this?
    Thanks.

    What do you mean you have to change your IP address? Can you give more details of what address you are getting (169.254.x.x, 10.0.1.x, 192.16.x.x)? How you are changing it and what are you changing it to exactly? What error messages are you getting? What router are you using?

  • Trouble connecting via ethernet cable (again)

    Please excuse that I already posted exactly this problem a few months ago. Now that I need the solution again my posts have unfortunately been deleted due to the 30-day expiration period.
    I try to connect a XP notebbok to the AirPort Extreme by ethernet. The cable is correct, now I need the right numbers for the XP network settings.
    IP-address: 10.0.1.2 (AirPort being 10.0.1.1
    subnet: 255.255.255.0
    DNS: ???
    Someone posted a solution but I can't remeber. Your help would be once again very appreciated. Thank you.

    IP address 10.0.1.201
    subnet mask 255.255.255.0
    router/gateway 10.0.1.1
    DNS - try 10.0.1.1, or enter the actual IP addresses of your internet service providers domain name servers

  • Trouble connecting via Ethernet

    At home I use Airport with a Time Capsule and a DSL connection. Recently I've tried to plug into the modems at friends' houses via Ethernet and haven't been able to get online. At one location it's a cable modem, the other DSL. I go to Network Preferences and try using "Automatic" as my location ... but no luck. I've tried using "Assist Me" but it always winds up telling me I need to check with the ISP and/or enter login info. However, my friends have told me other have just simply plugged their laptops in and immediately were connected. What could be wrong on my end?
    Thanks in advance!

    You don't say what ISP it is but typically ISPs like Comcast capture the mac address of the first device to connect to the modem. Any change in the device, such as you connecting your computer to the modem in place of your friend's will not result in a successful issuance of an ip address to your computer. You must power cycle the modem when you change the device connected to it.
    The way around this is to connect a router to the modem. You can then connect your and your friend's computer to the router at the same time. Each will get onto the Internet without any need to power cycle the modem.

  • WRVS4400N wireless client has no internet access, unless first connected via cable

    Hello everyone,
    I recently purchased a WRVS4400N security router and have got a strange problem with it. I set it up as my main router and connected two computers (a desktop and a server) using DHCP. They both work fine, internet is as fast as it should be, no problems whatsoever.
    However, when I setup the Wifi SSID (whatever security options I use, same with open/wpa/wpa2) and connect my laptop to it. It is allocated a IP address and windows even says that there is an internet connection. As soon as I try to do anything though, I am dropped. Try to ping an outside server, failure and dropped. Open IE, failure and dropped. I cannot even access my local server connected by wire to the router.
    If I connect the laptop via a cable to the router everything works, and it continues to work when I unplug it. So this means that right now I walk over to the router and plug my laptop in for 3 seconds before I unplug it and then use the wifi for a couple of hours without any problem. But as soon as I try to turn on my wireless Logitech SqueezeBox or wireless printer, they fail and take my laptop with it..
    I have:
    reset the router, used both firmware 2.0.2.1 and 2.0.1.3 and done a factory reset.
    Tried to move the router close to the laptop, no difference.
    Does anybody have an idea as to what my problem could be?
    /thomas

    Hi Dean,
    No this isn't from a company. I bought it used from www.tradera.com (like ebay) . The seller tells me it worked fine for him and has agreed to refund me. Thank you for answering, I have worked with some cisco routers and firewalls before but this one really got me pulling my hair.
    I take it from your response that this is a known error that is covered by warranty?
    /thomas

  • Trouble connecting to cable modem

    Cable company is telling me my mac has a problem connecting to the modem.  Will not connect to a dynamic IP address.  Any ideas on what is wrong.  I can connect fine at Best Buy and wirelessly to my neighbors but not to their modem in my home. 

    Log into your modem.
    check the settings.
    have cable co check that their last drop point has a good signal and is this a rental modem from them or yours? and is there any fimrware update?
    When did it start having trouble?
    And have you thought of posting in the macbook  pro forum as well as over on Snow Leopard OS support?
    Apple has some good tutorials on troubleshooting networking and internet connection issues.
    http://www.apple.com/support

  • Trouble Connecting to Cable Internet

    Recently I have been unable to connect back to the internet with my cable modem. A few months ago I tried using wireless internet from houses around mine and surprisingly it worked. (I realize this isn't TOTALLY legal.) Anyway, I have been trying revert back to the cable modem and nothing is working. I turn off the airport. I have restarted the computer. I have restarted the modem and waited the 15 minutes. I had unplugged the cable when I was using the airport obviously and twice I was able to plug it back in and it would work. This isn't the case anymore. I hadn't changed any setting so I'm not sure what the problem could be. Any help would be hugely appreciated.

    Now when you plug your iBook directly into the modem, the internet works. Correct? Which Airport do you have? Try resetting your Airport. Below are some more links that should be useful...
    Knowledge Base Document #106858 is the Airport Troubleshooting Guide
    Knowledge Base Document #107451 on Resetting the Airport Extreme Base Station
    Knowledge Base Document #106602, which explains How to Reset the Airport Base Station (Dual Ethernet)
    Knowledge Base Document #58613 - Resetting the Airport Base Station (Graphite)
    Airport Express FAQ
    Knowledge Base Document #108044 on Resetting Airport Express
    Knowledge Base Document #166602 troubleshoots I Don't See My Airport Network
    I didn't know what Airport you had, so I included all of them. Select your model and try reseting it. If worse comes to worse, just do a Factory Settings Reset. You will have to configure it like you just took it out of the box. I have found that this usually fixes most AirPort problems.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Maybe you are looking for

  • Error while saving the process order

    Hi All, I changed the quantities of the components and trying to save the process order. But I'm getting a message " "PLEASE REEXPLODE BOM, SINCE THE PROCESS ORDER COMPONENTS HAVE CHANGE". What would be the reason? It is not happening to all the user

  • My Databases Panel will not display my Databases?

    The issue "This server behavior requires a Cold Fusion Data Source" happens to me periodically when DW crashes after a week or two of non-stop use and all of my Databases "disappear" under the Database Panel? DW thinks that I have no Databases setup

  • Getting 600EX-RT slave to fire only via Pop-up Flash

    I have a 600EX-RT set up as slave and contolled by 60D using pop-up flash.  I have the 60D settings set for the slave to fire only as per pages 140-141 of the 60D manual.  However, in this setting the pop-up flash will still fire.  At the end of page

  • Response.sendRedirect() from doEndTag() method

    Hi there, I am trying to call response.sendRedirect("url") in a custom tag doEndTag() method but for or some reason I cannot get access to the javax.servlet.http.HttpServletResponse object where this method lives. Does anyone know how I can do a resp

  • Processing a dimension error message failed to expand K2 function

    Hi SAP gurus, For  doing processing of a dimension i am getting the error message, Failed to expand k2 funtion for dimension P_ACCT'S member formulas Members invalid On Dimensin (RPTCURRENCY:LC) The error message is only when i am using  FORMULA in a