Problema premiere pro

ho un problema con premiere pro, con versione più recente della 6.0 non riesco a far funzionare la mia scheda pinnacle dc 1000 come mai? è un problema di driver o del premiere pro? grazie

Did Jerry.K's reply in this thread: http://forums.adobe.com/thread/951845?tstart=0 not help?
Good luck,
Hunt

Similar Messages

Audio Export und andere Probleme Premiere Pro CS5

Ich habe folgende Probleme mit Premiere Pro CS5:
1. Sobald ich eine Sequenz exportiere (egal welches Format, auch wav als nur Audio) scheint der Ton verschoben. Ich habe Interviews zusammengeschnitten und die Schnittpunkte sind nicht so, wie ich sie in Premiere höre. Es ist, als wäre der Ton um ein paar Frames verschoben. Ebenso sind knackser im Audio zu hören, die ich in Premiere nicht höre. Woran liegt das?
2. Ich hatte mehrere mp3 in Premiere importiert. Die Arbeitsspeicherauslastung stieg auf 7,32 GB (8GB installiert), der Computer wurde langsam und Premiere reagierte nicht mehr. Die Festplatte schrieb andauend Daten in C/Benutzer/../AppData/Roaming/Adobe/Premiere/5.0/metadataCaches. Nachdem ich die Files in wav umgewandelt hatte und die mp3s ersetz hatte funktionierte alles einwandfrei. Premiere Pro CS5 scheint ein ernsthaftes Problem mit Audio Files zu haben, die ich bei 2.0 nicht festgestellt habe.
3. Woran liegt es, dass ich, wenn ich HD Files mit quadratischen Pixeln als mpeg2 für eine DVD raus rechnen will schwarze Ränder an den Seiten erscheinen. Stimmt da etwas mit der Umrechnung von 1920x1080 auf PAL nicht? FinalCut hat das Problem nicht.
4. Wenn ich eine Sequenz von Premiere in After Effects sende habe ich zwar eine Komposition in After Effects aber leider keinen Inhalt. Woran liegt das?
Vielen Dank für eine schnelle Antwort,
Frieder

Remix using the Laptop's internal speakers. They seem to be the more accurate.

Problemas premiere PRO CS3

en adobe premiere PRO CS3 vamos a editar un video. ruta:
1.- en el cuadro proyecto inicio una secuencia, y con raton derecho importar. fotos, videos... ya tenemos el material escogido en el cuadro de proyecto.
2.- doble clic sobre una de las fotos y aparece en el panel central, donde hay 3 pestañas de ORIGEN (cortar), CONTROL DE EFECTOS (muy bueno) y MEZCLADOR DE AUDIO.
3.- boton derecho sobre la foto..etc = INSERTAR. y directamente va a la barra de LINEA DE TIEMPO O SECUENCIA. es donde montaremos el video.
hasta aqui bien.
el insertar en esta barra, o lo hacemos con boton derecho INSERTAR o lo arrastramos desde el panel central hasta la pista que queremos utilizar.
por defecto hay 3 pistas de video y 3 de audio + una original.
es en estas pistas donde moveremos, juntaremos, aplicaremos transiciones..etc de los fotogramas, tramos de video, archivos de musica. desde esta barra saldra nuestra edicion.
MI PROBLEMA DE AHORA, antes no. al añadir un segundo fotograma desde origen (panel central) a la barra de tiempo. hay un fallo de (software.. hardware..configuracion)???? que hace se duplique la LINEA DE TIEMPO. es horrible.
si quiero mover fotogramas entre las pistas de video, igual!! se vuelve a duplicar la barra de LINEA DE TIEMPO. y lo hace en cascada. no vertical.
es imposible editar, perdon editar si por hacerlo en el panel central. es imposible montar un video, hacer la composicion, ya que muevo los fotogramas y cada vez se añade otra linea de tiempo. que deriva en que aquella barra vertical de "comodin" que nos indica donde insertar el fotograma en cualquiera de las pistas de video. esa barra se corrompe y no es real. es imposible hacer un montaje.
00:00:000 LINEA DE TIEMPO original
00:00:000 LINEA DE TIEMPO duplicada al mover cualquier archivo.
00:00:000 y vuelve a duplicar...
esto deriva en que las pistas de video y audio quedan solapadas en cascada y no hay manera de trabajar.
este problema es de ahora. hace unas semanas he formateado y lo tengo ahora. antes con el premiere PRO CS3 no lo tenia.
he bajado una version de prueba de CREATIVE SUITE 4. el adobe premiere CS4, el mas nuevo. CON EL MISMO ERROR.
edito videos por hobby. de eventos deportivos, familia.. tengo pendiente uno, y me esta cogiendo el toro...
he actualizado la tarjeta grafica, 2 x NVIDIA QUADRO FX 570 actualizada con drivers del 21-10.
quizas al tener 2 podria estar aqui el problema. desde el formateo no se ha conectado ni desconectado ningun cable. la misma pantalla. no he tocado nada de hardware...
puede alguien indicarme como puedo solucionar esto? que puedo hacer? donde esta el fallo?
muchas gracias
saludos
j ferrer

Donde puedo encontrar una buena guía en formato pdf para practicar film look utilizando premiere cs3.
Gracias
Alain Tarbes
Venezuela
MAIL: [email protected] y [email protected]

Codec Problem Premiere Pro CS5

Hallo,
ich würde gerne ein Video mit Premiere Pro schneiden. Allerdings kommt beim Importieren die Fehlermeldung, dass der Codec fehlt oder nicht verfügbar ist. VLC spielt das Video aber ohne Probleme ab und gibt als Infos an:
Codec: Mpeg-1/2 Video (mpgv)
Auflösung: 1440x1080
Bildwiederholrate: 25
Der Container ist MOV.
Kann man da irgendwas machen um das Video zu schneiden? Es wundert mich ein wenig, weil ich schon HD MOV Videos ohne Probleme mit Premiere geschnitten habe.
Schonmal Danke für eure Antworten. Viele Grüße
Foma

Na wenn er das ganze auf dem Mac gemacht hat, dann ist die Datei auch nur dort verwendbar. Das ist ein uraltes bekanntes Problem, weil Apple sich eien eigene Version des HDV CoDecs gestrickt hat. In dem Fall wäre es sinnvoller, sich die Kamer nochmal zu borgen unds selber in Premiere alles nochmal zu capturen...
Mylenium

Audio Problem Premiere Pro-Jumps to clip start

Hey,
i am fairly new to premiere pro and during one clip which is just over 4 minutes, the audio jumps back to the beginning and plays the beginning audio section through again and then comes back into synch at the end...
thanks for reading.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Runtime error problem - Premiere Pro CS5

Just ran into a problem when trying to export a timeline as an .avi file. The process goes much more slowly than usual and when the progress bar gets to 95% an error message window opens. The title of the error is: Microsoft Visual C++ Runtime Library. The message is: This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. Then, I have no choice but to close Premiere.
I foolishly downloaded and intalled some Windows 7 updates over the weekend and am assuming they might be the culprit(s). I rolled by the system to a restore point immediately before the download, but still have the problem. Any ideas on how to correct this? Of course this happens as I'm trying to export two finished videos to show to a client today. I'm running Windows 7, 64-bit.
Thanks, Steve Pender

This may help:
http://kb2.adobe.com/cps/403/kb403090.html
I've also noticed that bearly all instances of this error come from bad versions of third-party components like drivers, so I recommend updating your drivers.

Playback and encoding problems premiere pro cs6 and lightroom4

BIG BLOCKY ARTIFACTS
the problem ocours in all videos(every 1sec) i recorded in my dslr d5100. 1080p 30fps .mov files. in media player classic it play flawless all videos as seen in my pics.
how to fix it? i tried unstalling codecs and nothing. will try installing quicktime. i think its codecs or maybe hardware.
my pc is i5-2500k gpu gtx560 8gb ram.
please help me. thanks

[URL=http://www.4shared.com/video/94VvVdUM/0511_videogasometro_002.html][IMG]http://dc584.4shared.com/img/94VvVdUM/0.4382360316505566/0511_videogasometro_002.MOV[/IMG][/URL]
its 280mb, original. worst artifacts at 13secs.

Saving Project Problem - Premiere Pro CS6

Hi I have a project created on CS6 Premiere. We have run in to an issue now where it takes almost 30mins to save. It loads up very fast but saving is painfully slow. If autosave kicks in (now turned off) it makes it unuseable throughout this time. We have tried creating a new project and importing in the data from the exsiting one still no joy. Tried the same on our CC Machine and still the same. Any help with this would be appreciated. The project file stands at 28mb in size, have we run in to a size threshold. Ideally we want all the sequences to be in one project but if this is causing too much of an issue I guess we will have to split it. Either way it does seem very odd that whilst it loads the data quickly in to actually save it out takes too long.

Check both the screen shots.
Close all the timeline, highlight project panel and then export.
Regards,
Vinay

"Reveal in project" greyed out and match frame problems (Premiere Pro CC 7.0)

I'm trying to reveal a clip in project window by right clicking a clip in timeline and choosing "Reveal in project", but the function is greyed out. Is it because the clips are merged? The clips have one track of video and 1-3 audio tracks depending on clip. When option+right click either only video or audio, i get the "Reveal in project" available, but when clicked, nothing happens.
I also have problems with match frame. When i put a new (merged) clip on the timeline, it works, until i try the match frame again on different time. So it kind of works only on the clip that was previously edited to the timeline, and only once. Works fine with regular clips.
Clips were merged using in or out point as the sync point, and "Remove audio from AV clip" checked. Audio and video sources don't have matching timecodes.
I'm using CC 7.0 on Mac OS 10.7.5.

Is it because the clips are merged?
Yes. Match Frame does seem to have issues with Merged Clips as well.

Problem Premiere Pro CS6 CD Book Anaya Multimedia

in the CD would not come audios , videos ... just come to me .prproj and with that I can do nothing .
Could someone give me all content ( video , audio) that is in the CD to develop the exercises in the book ?
regards

Hi Gildegarn,
in the CD would not come audios , videos ... just come to me .prproj and with that I can do nothing .
Could someone give me all content ( video , audio) that is in the CD to develop the exercises in the book ?
Contact the publisher of the book. They might have the assets you are looking for.
Thanks,
Kevin

Problem opening Premiere Pro project after upgrades to 4.1.0 and Shockwave

I cannot open my project. During this project which has many CS4 AfterEffect pieces and with the Premiere Pro 4.1.0 upgrade and with the installation of the Shockware and updating the Flash Player to 10.0., I am no longer able to open my project!! I have been working on my problem for a many days/weeks - talked to Tech Spt twice - and followed instructions - the KB408983 - and when they told me to uninstall my QuickTime and install the new Quicktime, this caused other problems later with Aftereffects for some reason...recreated the Plug-ins, but nothing worked - maybe all this created more problems. When I finally found files in the AutoSave folders, they all opened last week but now, they are in the same situation - cannot open any of them now!!! I finally found one file in the TEMP folder and was able to open it and tested each file which I had imported initially - then found one file that may have corrupted during this Update procedures - so I removed it and inserted another AAE file - but now, none will work after I initiated the KB408983 steps!!! So now, I no longer have any files that I can open.
Problem: Premiere Pro opens my project - goes thru the process of loading but gets stuck about 3/4 length - it will sit there forever, without any error message!!! I left it for 2 1/2 hours and it just hung in there. So, I believe now that with all these updates and changes to the Adobe products, I may have corrupted some of the AfterEffects files or maybe other files? I have worked extensively on this project and need desparately to open it so I can finish it!!
Last month, I had similar problems and Tech Spt asked me to uninstall CS4 Premium Production software and reinstall it. During the uninstall process, it wiped out my CD Rom driver so I was unable to Re-install my CS4 software - finally found out how to fix the CD Rom corruption in my Register and was able to reload and it worked at that time but now, I cannot open it. So, all this has been a nightmare.....!!
Does anyone have any solution?????
Thank you!
Jean

It sounds like your app isn't activated anymore. When it's in that state, the MPEG codec options aren't available, and unfortunately the RED presets
use the MPEG codec for preview rendering (at least on HD sized presets). So the upshot is that when the MPEG codec isn't available, the RED presets
fail to load.
Reactivating your serial number should fix the problem. Or if it doesn't, you'll need to sort out with tech support why your MPEG isn't coming back online. (You're probably looking at more reinstallation fun unfortunately )

Premiere Pro CC 2014.2 crashes when "locating media"

The problem;
Premiere Pro CC 2014.2 crashes when "locating media". I am working on a project that has not given me any problems for the last 200 hours. About a week ago I notice that the .proj file size was 276mb and found this odd because my largest project to date was never larger than 80mbs. I thought that the premiere was running slow because of the project size. As luck would have, when my client made their their final changes 2 days ago, I opened the project and premiere would hang on the locating media window and then would crash. I called Adobe and spent an hour on the phone with them to no avail.
Project workflow
- 700gb of 5d footage
- 20 sequences under 5 minutes
- Dynamically linked files with AE
- Warp Stabilized about a dozen clips of under 5 sec
- On every sequence color correction adjustment layer with RGB Curves, Three way color corrector and sharpen filter
- I kept old versions of the sequences (I was in version 5 before the crash)
What I have tried;
- Unsuccessfully tried to open auto-save files for this project.
- Successfully opened other older non relevant project
- Removed Mercury playback engine in the project settings
- Cleaned out media cache database through pp in media Preferences
- Manually deleted cache files in /Common/Media Cache Files and /Common/Media Cache
- Tried importing sequences into new .proj file; it would crash as a result.
What "worked".
I was able to open it on another computer. save it under another file name. bring it back to my original computer and open it without problem. I lost about 3 days working through this problem, I missed my deadline. and angered the client. I was able to use a friends IMAC to "fix" the problem, however I can't always count on him being there if it happens again.
Questions.
- What the hell happened? Why could I open it on one computer and not on the other?
- Is there a way to fix a corrupted .proj files on a PC?
- What should the average file size be, before it becomes unstable? (I'm pretty that my file size was bloated by all the previous versions of the sequences)
Windows 8.1 64bit
Premiere 2014.2
Intel Quadcore i7-4770 3.40GHz
16gb Ram

Hi,
I would suggest the following steps:
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Run a disk permission repair on your boot drive, and
Reset Home Folder permissions and ACLs Error | Apple Support Communities
Thanks,
Rameez

Premiere pro will only exports 2 files Audio and Video

Hi i'm jared i have a serious problem premiere pro is exporting 2 file an audio and a video file I've tried to use multiplexing and it wouldn't work please help.

Yes that is correct: video files (mp4). They are not separate.
Just export and see what you got.
Start with a small segment of your timeline.

Failure to import fcp7 project's xml into Premiere Pro 2014. Details below. Why is it crashing? Any thoughts?

Here are the details of my problem:
Premiere Pro 2014 (up to date)
Mac book Pro OSX Yosemite 10.10.1 with 2.8 GHz Intel Core i7 processor
Source footage includes a variation of codecs as follows: H.264 in a .mov container, 1920 x 1080 Apple Pro Res 422, Linear PCM
There are no error messages, the import into Premiere Pro 2014 begins normally but the "progress bar" never starts and then after about 10 seconds a blank white box appears followed by the pinwheel.
When the problem occurred I was trying to import a fcp7 project's xml file into Premiere Pro.
I emailed Adobe Support Tech the fcp7 xml file and it crashed his computer, however, I was able to successfully import one clip from fcp7 (an Apple ProRes 422, Linear PCM, duration 1 minute) from the fcp 7 project into Premiere Pro, but not the whole project or the bare essentials (the cut itself).
I am not running other software
Do you have any third-party effects or codecs installed? Not that I know of...
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). ??????
I am using Mercury Playback Engine GPU Acceleration
The problem only happen when I try to import the FCP7 xml project file into Premiere Pro

Hi Lynn,
Have you inspected the XML file for any anomalies? That might be a way to see if any third party effects were used.
Thanks,
Kevin

Trouble with Premiere Pro and what to reinstall the program.

I have a Creative Cloud membership for photographers. Now I´m starting to use Premiere Pro that is installed throught this membership. But when I upload .MOV files to Premiere Pro I get a Error message, that premiere Pro doesn´t support this file? Witch i kind of odd? I know that this is an approved fileformat. Saw on a forum that you might get rid of that problem by installing the program again. How do I do, to reinstall Premiere pro? I can only see that I can install a testversion but I´m not interested in this. Because I already have a membership. I did change one of my disks in my desktop a few week ago, and maybe that´s whats causing this problem.

Premiere Pro is not part of the photography bundle, so beyond the trial you won't be able to use it. The rest we can't know. You have not provided any system info or otehr details like the source and type of your MOV files and whether you can e.g. import them in Photoshop. MOVs are Quicktiem files, so if you haven't even installed that, this is the first thing to do.
Mylenium

Problema premiere pro

Similar Messages

Maybe you are looking for