Problema to upgrade iPad from 4.3.5 to 5.0.1

I tried several times to upgrade from 4.3.5 to 5.0.1 , but at the time finished download(732.1 mb) respond with the error that i have to check my network setting, i don't see any wrong with the net, any clue? But anyway according the document is not so critical to upgrade except for the battery life improvement

No, I didn´t , I´ll try disabling firewall my Kasperski
thank you

Similar Messages

BPEL problem after upgrading Jdeveloper from 10.1.3.1.0 to 10.1.3.3.0

The problem concerns upgrading JDev from 10.1.3.1.0 to 10.1.3.3.0. At the moment I’ve got both versions installed side by side, and when I fire up version 10.1.3.1.0 everything is fine. However when I try and rebuild any of the existing BPEL’s in 10.1.3.3.0, I’m getting errors such as this:
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Failed to read wsdl.
Error happened when reading wsdl at "http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL", because "Failed to read WSDL from http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL: HTTP connection error code is 407".
Make sure wsdl exists at that URL and is valid.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
If I put the URL http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL into my browser, it retrieves the file correctly; my settings in Tools -> Settings -> Web Browser and Proxy are identical in both versions.
The same or similar errors occur in just about every BPEL I have looked at.
Does anybody have an idea what the problem might be here?

Hi Ken,
Could you tell us how you've defined your proxy exception list ?
I'm havind the same problems in a 10.1.3.3 environment where I'm not able to deploy a bpel process with an external webservice because of http 407-error.
Kind regards,
Nathalie

The mis-mapping problem when upgrading OWB from 11.1 to 11.2.0.2.

Hi all,
Our OWB ETL program was developed initially on OWB 11.1 platform.
Then after upgrading it from 11.1 to 11.2.0.2, several mappings are mismatched in the deployment PL/SQL package as below:
CREATE OR REPLACE PACKAGE BODY "MAP_PRODUCT_LIFE_CRT" AS
CURSOR "T_T_PRODUCT_LIFE_c" IS
SELECT
/* T_PRODUCT_LIFE.T_T_PRODUCT_LIFE.INOUTGRP1 */
"T_T_PRODUCT_LIFE"."INS_TYPE" "ORGAN_ID$1",
"T_T_PRODUCT_LIFE"."START_DATE" "HOSPITAL_TYPE$1",
"T_T_PRODUCT_LIFE"."END_DATE" "UNIT_FLAG$1",
"T_T_PRODUCT_LIFE"."LIFE_RATE" "INS_TYPE",
You can see that the field mapping is wrong! We have about 100 mappings, but only some of them go wrong.
We have tried the Metadata Loader and Repository Assistant for the upgrading, but the results are the same.
We have released all OWB patches on 11.2.0.2, but the results are the same.
Please help on it!

Hi David,
Besides the mega patch 10185523, we also have applied other tens of patches, e.g. 10225308, 11671955, 11705023, 1768535, etc.
Now we find that the wrong field mapping just appears in the row-based part of the mapping package. So if the set-based mode works well for the mapping execution, no error will happen. That's why we just found the problems in several mappings.
And one thing is even worse. In the patched OWB 11.2.0.2 env., we tried creating totally new mapping. The result is the same: the wrong field mapping still appears in the row-based part of the mapping package.
So this problem seems not related to the upgrading.
Regards.

Problem upgrading iPad from iOS 4.2 to 4.3....

Before I start, I can confirm that I have successfully upgraded my iPhone4 from 4.2 to 4.3.
In regard to the iPad, when I click on the 'Check for update' button in my iTunes device summary page, it states that 4.2 is the 'Current Version', even though I know that iOS 4.3 is available. Therefore to try and force an update I selected the 'Restore' option in the same summary page and it prompts me if I am sure that I want to restore etc... which I confirm with the RESTORE, then I get an error message of _'There was a problem with downloading the software for the iPad "iPad". The requested resource was not found.'_
Anyone have any ideas how to get around this issue, or why iTunes is telling me that 4.2 is the latest version.
Thanks in advance.

here's a tip from another thread http://discussions.apple.com/thread.jspa?threadID=2777490&tstart=0

Problems after upgrading LMS from 4.1 to 4.2.3

After the upgrade of the LMS we have the situation that all our deviced are visible in the subnet groups but not in "all devices".
When I want to launch an inventory collection the following message is displayed:
"ICSU0025: Problem with JRM. The JRM server may not be running. Check ICServerUI.log for more details. See the user guide Administration of CiscoWorks LMS for the log file location."
When I do a Discovery, the deviced are being discovered but they are unreachable.
And all the host names are changed into their IP addresses.
I can't seem to find the problem. Even after roaming the forum here.
I'm not able to pinpoint the exact cause of the problems...
Any ideas?
regards,
W

That is a healthy normal state for ANIServer. I checked some similar cases and it seems most of them were transient and got resolved once daemon was reatarted.
I would suggest to follow this procedure once additionally :
> Stop Daemon manager
> Regenerate SSL certificate
> Do a transaction log for RME DB
> Start the daemon
For 2nd and 3rd check my this post for process :
https://supportforums.cisco.com/message/3597059#3597059
If this is Solaris/linux, for transaction log, check this link (under Recovering From a Server Crash).
-Thanks

Document Problems when upgrading B1 from 2004 to 2005

When upgrading from B1 2004 to b1 2005 any documents over 2 pages cause B1 to crash - anyone found the same problem or a solution.

Hi clive
When you say it crashes, does it just close and no error. i've came across that problem when making complex documents. If you have made your document as an A4 document, check what the default printer is? Go to file->page setup .You'll see the printer it will print with and it's page size (letter,A4,etc). Make sure that is the same as the one you have set in the pld in the document.
Hope this helps

Problems after upgrading ASA from 8.4.5 to 9.1.1

Hi,
We are having problem with behavior of nat statement after upgrading ASA. Here are results of packet tracer in our testing environment:
object network onBK028VRRP
host 1.1.1.111
object network onSIEMServers
host 1.1.1.1
object service osSyslog
service tcp source eq telnet
object-group network ognBK028ClientsOutside
network-object 10.0.0.0 255.0.0.0
nat (inside,outside) source static onBK028VRRP onSIEMServers destination static ognBK028ClientsOutside ognBK028ClientsOutside service osSyslog osSyslog
ASA 8.4.5
packet-tracer input OUTSIDE tcp 10.1.1.1 50000 1.1.1.1 80 detailed
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   1.1.1.0         255.255.255.0   inside
Phase: 2
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group IZOUTSIDE in interface outside
access-list IZOUTSIDE extended permit tcp any any eq www
Additional Information:
Forward Flow based lookup yields rule:
in id=0xce99ccc8, priority=13, domain=permit, deny=false
        hits=0, user_data=0xc91bc540, cs_id=0x0, use_real_addr, flags=0x0, protocol=6
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=80, dscp=0x0
        input_ifc=outside, output_ifc=any
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xcb53d948, priority=0, domain=inspect-ip-options, deny=true
        hits=42, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
        input_ifc=outside, output_ifc=any
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Reverse Flow based lookup yields rule:
in id=0xcb561758, priority=0, domain=inspect-ip-options, deny=true
        hits=40, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
        src ip/id=0.0.0.0, mask=0.0.0.0, port=0
        dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
        input_ifc=inside, output_ifc=any
Phase: 5
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 43, packet dispatched to next module
Module information for forward flow ...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_tcp_normalizer
snp_fp_translate
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Module information for reverse flow ...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_translate
snp_fp_tcp_normalizer
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: allow
ASA 9.1.1
packet-tracer input OUTSIDE tcp 10.1.1.1 50000 1.1.1.1 80 detailed
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   1.1.1.0         255.255.255.0   inside
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (no-route) No route to host
Which option change this?
BR, M.

Looks like you are hitting the following bug: CSCud64705
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud64705

Problems after upgrading catalog from LR4 to LR5

After upgrading a LR 4 catalog to LR5, I moved some files around between sub folders. I then went to sync up the parent folder. The dialog box said that I would be importing 12,000 photos and deleting 12,000 missing photos. My folder structure for a ctalog is a parent folder named for the year and the sub folders with the date and shoot description. I was synchronizing the parent (year) folder. When it finished, the folder structure was correct and the photos were in their new(correct) folders. However, all of my LR4 adjustments that had been made in LR4 were gone. There was no history either. It was like I was importing for the first time.
I upgraded the original catalog again and the photos were in the original locations just like the first time I upgraded. I tried to sync an individual folder and it imported 50 new files and deleted 50 missing files. Again the LR adjustments were gone. Any suggestions on how to sync an upgraded catalog without losing my prior version adjustments?
Mac OS X 10.9.2
LR 5.3

Yes, synchronizing is not the tool you should be using in this case, when you move photos from one folder to another. The proper method is to reconnect your photos in Lightroom after you moved them via: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. But your current catalog has lost its edit information, so this will not help on your current catalog. So ...
I hope you have a backup of the catalog file before you did the synchronization, or otherwise you will have to upgrade your LR4 catalog again. Open one of those and then reconnect as in the link.
As side advice, perhaps you might want to consider using an organizing technique that does NOT require moving phtoos/folders from here to there. You might want to consider using organizing and searching via keywords and captions and other metadata, which does not require moving photos, and does not require re-linking photos, and gives you the ability to place photos in more than one "category" (keyword), rather than with folders where a photo can be in at most one "category" (folder)

HT4623 Trying to upgrade iPad from ios5 to ios6. Yet software upgrade button says "all up to date, ios5."

How do I get the latest software om the device? The software upgrade button does not show ios6 as available. It shows ios5 as current.

The first generation iPad is incapable of running iOS 6.
(88422)

HT1848 Upgrading iPad from 4.3.3 to 5.1 and retaining bookmarks

I have an iPad running OS 4.3.3 and I want to upgrade to 5.1. Can I retain my bookmarks and how do I backup my music?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Having problems with syncing iPad from iTunes

I am trying to sync a playlist from my itunes to my ipad but every time i do, it won't upload onto my ipad. It actually takes music off. I don't know if i need to restore the ipad and resync the whole thing or if there is a way i can just get it to resync my music. When I go to the tab of "on this ipad" this is what i get I understand that the cirlces on the left of the songs are the songs that aren't available on my ipad but how to i re upload them??? every time i try to sync nothing happens at step 6 other then "waiting for changes to be made" and it finishes. i haven't seen any songs go onto my ipad. and everything is updated.
Please help.

I know that it is time consuming and a bit of a pain in the butt to have to do it, but I would backup the iPad, restore to factory settings and then restore from the backup, and sync everything back to the device. It's going to take a while because you have a ton of music on the iPad, but IMO, that would be your best option now.
You could try unsyncing all of the music, and then resync it all again, but that takes time as well. If you are going to spend that much time trying to fix it, you may as well restore the device ...IMO once again.
Use iTunes to restore your iOS device to factory settings

I'm experiencing problems updating my ipad from ISO4 to ISO5.

It is saying that the network will not allow it to update. Any solutions?

It is saying that the network will not allow it to update. Any solutions?

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

Hi guys I have a iPad 2 I recently upgraded it from iOS5 to ios7. Since then it only uses the 8ta network but in the top left hand corner it says no service with 3G next to it how am I able to fix this? Could it be a hardware problem?

Since I upgraded my iPad from iOS5 to ios7 my iPad will only work on one network.
However in the top left hand corner is says no service with 3G next to it.
I took it to Apple istore in clearwater mall and they couldn't help me.
Please advise me on how to sort the problem out.
Kind Regards

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?

I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

Problema to upgrade iPad from 4.3.5 to 5.0.1

Similar Messages

Maybe you are looking for