Problema Touch ID

El Touch ID me falla muchísimo al principio de comprar el iphone me iba bien no me fallaba nunca pero pasado un tiempo me siempre me falla. Al limpiar el botón mejora pero solo durante unas beses después vuelve a lo mismo. E probado con hacer un borrado y sigue igual. Alguna solución? Muchísimas gracias

Have you tried cleaning your thumb to remove oils and dirt that will cause recognition to deteriorate? Also clean the Home button thoroughly.
You also need to go through the entire touch setup that should capture you entire finger print instead of only catching a partial record.

Similar Messages

Oct 22, 2013 11:58 PM downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guid

Oct 22, 2013 11:58 PM
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........running 10.8.5 til today................???????? Can run in safe boot, but what do i do now ??? thanks
MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

Downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc'

downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........thanx
running 10.8.5 til today........................???????? Can run in safe boot, but what do i do now ??? thanks

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

IPhone 3GS Problem/Touch Controls no longer respond after random intervals

Hi all,
I need some answers regarding my iPhone 3GS 32gig, which was working perfectly until about a month ago, after I upgraded to firmware v3.1.
The touch screen 'locks up' i.e. it won't accept any input via the screen and seems to happen at random intervals, but the app continues to run. If I leave it long enough, it'll accept input again after a minute or two, otherwise, I hit the sleep button and then the home button to wake it, and it obeys my commands again. But only until the next time. It can occur using ANY app but really ***** when I'm de-stressing with a good game of Space Invaders Infinity Gene.
I've tried all sorts of things to correct the issue based on what I've read on the web, foremost, restoring the iPhone from a backup. That didn't help. I had about 500meg of free space left and thought maybe it needs more than that to function perfectly, so I deleted a lot of games and apps (mostly lite versions) and freed up enough space so that 1 gig was left available. Still no help. Tried restoring again, still no change.
When the 3.1.2 update came out, I hoped it would fix it. Alas, no.
Push notifications are turned off for my Mobile Me account, and for all the other apps that allow push notifications. I'm with Optus, not that that would make a difference (?).
Given that apps run one at-a-time, I can't believe any single app could be causing this behaviour, and I don't like the idea of trying to find out what that app might be if it is by copying them individually back to the iPhone just to see when the problem comes back again.
Oh yeah, and I've not jail broken my iPhone. Seriously.
Can anyone make any other suggestions? I imagine resetting all settings from the Settings screen will delete my progress on Space Invaders Infinity Gene, so I'd rather not if I can help it.
Thanks in advance!
- Alex

Not that it helps, but a me too here.
It randomly seems to stop responding for a while.
I often find I cant skip tracks in the music player etc.
This is a brand new stock phone, upgraded to 3.1.
Sleeping and turning on again seems to fix it, or waiting for ages

Problem touch screen IdeaPad U330

Hi!
I know this problem might be posted before, but I couldn't find it.. So I'm trying it this way.
Since a few weeks my Lenovo IdeaPad u330 has a problem with the touch screen. When I start my laptop, it works perfectly, but after a few minutes - or maybe an hour (it's quite random actually) the touch screen stops functioning, and I can't use it at all. I've used my laptop for over 10 months now, and the problem only started occuring a month ago, I think.
I think it might have something to do with the fact that my apps stopped working and that I had to 'restore the system'.
For the record, I'm still using Windows 8..
Anyone's got a clue?
Thanks in advance!

We've just started having a problem with the touch screen. The screen becomes unresponsive and while the trackpad works the cursor flickers so you can only see it while it's moving. After a bit of playing with it I realised that it was registering some presses at the bottom of the screen- you could see the touch feedback circles. If I moved the screen a little, holding it at the top, more or fewer touches registered, so it looks as if the screen housing is putting pressure on the touch screen. If you hold the screen just right then no touches register and it goes back to normal.
I'm just getting ready to return it. Probably try to get a refund because it looks like a design fault to me. Shame because it was a great laptop (despite windows 8)

Youtube buffering problem Touch 9800(v6.0)

Pls I hv problem watching youtube videos on my
phone. It was workin normally b4 but now I don't
know wat hpnd. After buffering 4 a long tym it
writes connection has been disconnected. I use a
BB touch. Pls wat can I do. Tanx!

I can't say if those will help or not, but they are two different processes, both of which will totally wipe out all of your data, apps, etc. So be sure you start with a good backup.
KB18998 How to reset the BlackBerry smartphone to factory defaults
For reloading the OS, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem : touch screen compatibility with photoshop

Hello , I have Sony vaio touch screen and i have windows 8.1 and photoshop cc 14.0 installed in my system , the touch screen works in all PS interface but it doesn't respond in work area
Please help me to solve the problem !

This should tell you what you can and can't expect
Photoshop Help | Touch gestures

Windows 8 upgrade problems (touch screen and audio)

my　computer is HP touchsmart 600 1005xt and recently upgraded from windows 7 to windows 8 (64-bit)
after up grading I noticed that the touch screen does not work and and the speakers also did not work

HI,
Here are a few tips that might help you to get your touch screen working:
Activate Windows and install updates by pressing the Windows logo key + W. Type "Activate Windows" into the search field, and then click on the Activate Windows icon that appears in the upper left corner of the screen. In PC Settings, click on Activate Windows, wait for your computer to connect to Microsoft, and then follow the onscreen instructions. Restart the computer. Press the Windows logo key + X, and select Control Panel from the menu. In the upper right corner of Control Panel, select Large Icons from the View by drop down. Click Windows Update. Install touch and/or graphics driver updates. Restart the computer.
Another thing to try: Go to the HP Support and Drivers site and click Drivers and Software. In the search field, enter your product name or number, and then click Next. Select your operating system from the drop-down, and then click next. (If you don't know if your operating system is 32- or 64-bit, press the Windows logo + X key again and select System from the menu.) Follow the onscreen directions to install any appropriate drivers. Restart the computer.
If the touch still doesn't work, try this: Press press the Windows logo + X key, and select Device Manager from the menu. In Device Manager, click the little triangle next to Display Adapters to expand the list. Right-click on the graphics card and select Disable. When asked if you want to disable the card, click yes. Restart the computer. You may have to tinker with your screen resolution.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

PHONE PROBLEM TOUCH IN DOCK

HELLO EVERYONE,
I cannot push icons on dock or in other app,the phone style work fine but not to use the warehouse because the tactile screen does not work in the bottom zone,I have buy this at st Martin (French west indees) with an orange coverage of 600 US dollars, I leave now in spain what i can do
because Orange said to go back st martin (Orange Caraibes not same Orange FR????)
SO i send the phone to the shop i by they said the phone cannot be change and they send me back the phone with just a letter sorry we cannot do anything for you ????
tell me what i can do apple still pay by the shop and make profit....
thankS

The screen need to be replaced. Contact Apple nearest you and ask for Customer Relations. Explain the situation to them and they should come up with an answer. If that phone was unlocked by anyone other than Apple or Orange, your warranty is no good. You do have an option of getting the screen replaced from a third-party source for around $200.00 though.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group 
Creator of Mac611 - Mobile Mac Support (designed exclusively for an iPhone/iPod touch)

Zen Touch Problem: Touch Pad stopped work

so yeah, my Touch Pad on my Zen Touch has stopped working
any one have any possibles fixes in mind?
thanks in advance

Please remember to keep your language clean when posting here.
If your player is still under warranty, as SSR said, then you can get it replaced by us. You can contact us by e-mail or phone for more detail:
Americas Customer Support
European Customer Support
Asia Customer Support
Cat

Multiple problems: Touch Screen and Power Button on my Iphone 4S.

My power button on my iphone will click but it doesn't recieve any response from my phone. Also, my screen isn't working at all. The only button that works is the home button. The phone is only a couple of weeks old. I recieved it in the mail from apple and it has run smoothly up until now. It is a very random occurence and I would like to have it resolved quickly. Any suggestions?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Make an appointment at an Apple store to have the phone checked out. Or call Apple Support.

Nokia Lumia 720 Touch not working even after repla...

Hi ,
I had bought lumia 720 on 31/05/2013 , but on 28/12/2013 the touch was not working or the touch was working on its own. Since my phone was in warranty then, they replaced the touch free of cost. But again from 20/08/2014 my phone is having the same problem, touch not working. When i showed it to Nokia care, they told that again they need to replace the touch , it will cost around Rs. 7950 (since my phone was out of warranty this time)... My question is, within 1 year 2 months , twice the touch pad has problem. What kind of phone it is .... Please think before buying Nokia touch phones, I think still they are far behind in touch screen technology ( no offense :-) )....
Not only me, one of my friend also facing same problem with Lumia 720 ....

Not beeing familiar with other countries consumer laws and consumer rights, I can only speak for my self and Norway. But as far as I'm concerned I would have expected extended rights for the new parts and the labour. - If however the fault can relate to the parts involved with the mentioned replacement.
But if this is not possible in your country, there isn't much to do other than repair it for pay or leave it.

Torch 9800 touch screen only works when slid open.

Hello everyone, this is my 1st post but I've been lurking the forum for some time. I'm running a Torch 9800 on AT&T right now on v6.0.0.600
This is what's happened with my phone: as the subject notes, my touch screen only seems to work when I slide open the phone.
What I've tried so far that doesn't work: rolling back software, rolling the software forward again, hard resets, soft resets, adjusting intervals for the touch screen.
The weird part is that I saw an older thread that had the exact opposite problem(touch screen only worked when the phone was slid closed). I have a level/ruler app for my phone and it's showing that the phone knows when it's tilted/angle/orientation. I've also closed the phone, opened it slightly (about the width of my thumb) and it stays horizontally oriented + I'm able to use the touch keyboard that way.
Anybody have a suggestion as to what I can try next to fix this? I haven't gone so far as to just go and get a 9810 yet, but i'm considering it.

Thanks for the post.
Has it in anyway fallen or pressed hard at any point? It could be the belt, which would just need you to go with it to a certified repair center and get it secured.
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Toch screen problem

i have iphone5s problem touch screen not working problem i done all software and all that but still some part of screen is not working

This sounds like a hardware issue.
You can rule out a software problem altogether by restoring as a new device.
Connect it to iTunes on your computer, backup your iPhone and restore the iOS software.
This will redownload and reinstall iOS 7.0.6.
After the restore, set it up as a new device (not a backup). If the problem still exists it is most likely a hardware issue and you will need to make a Genius Bar appointment or contact Apple for repair.

Touch Screen Un-Responsive

Problem: Touch Screen not fully responsive at all times.
I broke one screen trying to answer calls before the ring sequence timed out.
After missing 7 calls over a few hour time span, I tried harder and harder presses on the screen.
Lesson learned - take it back anytime it hiccups. The phone was 5 to 6 weeks old.....
That phone was sent off for out-of-warranty repair.
The replacement (luckily I had a line up for upgrade) has the same problem, but not as severe.
The problem seems to be worse under high humidity weather conditions.
Problem: Repaired Phone now unable to be brought out of standby
The original arrived back from repair.
The screen was replaced, and the LCD was reported to be damaged in shipping, so it was also replaced.
The phone now will not wake from standby, under any circumstances. You have to remove the battery and restart.
I have the screen timeout set for 30 minutes. At least it lets me do some things via WiFi.
I have done a Full Reset, format SD Card and format Phone Storage.
I have also done a complete firmware reload.
Anyone have any ideas?

Yuy can try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restor to factory defaults/new iPod.
If you still have the problem that points to a problem like bad digitizer. Apple will exchange your iPod for $99, $149 or $199 depending upn the capacity.
A third-party place may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replae the screen yourself
iPod Touch Repair – iFixit

Problema Touch ID

Similar Messages

Maybe you are looking for