Problema uscita audio HDMI

Ho un MacbookPro (inizio 2011) da 13" ed ho acquistato un adattatore HDMI. Al primo tentativo ha funzionato tutto perfettamente sulla mia TV fullhd Samsung 32". Poi ho formattato il mio MacBook e ripristinato con TimeMachine. Oggi invece l'icona dell'audio compare grigia e nelle impostazioni di uscita audio sotto la voce SAMSUNG HDMI compare "Il dispostitivo selezionato non dispone di controlli di uscita audio". Detto questo però l'audio esce dalla mia tv e funziona.
Secondo voi è un vizio di forma o è un problema vero e propdio? Grazie dell'aiuto.

Similar Messages

NO Audio HDMI on HP 17-j001eb with Windows 8.1 Pro to Sony Bravia KDL-40W5500

Hi,
When I connect my pc for watching movies on my tv, I have no audio.
This is my setup:
I've a Sony Bravia KDL-40W5500. He is connected to my Sony Multichannel AV Reveiver (output) (All my hardware -> decoder, BD player, ... Are conntected with the receiver (input). There is just one HDMI cable to my TV.
Receiver backside:
Problem:
When I conntect my PC ( HP 17-j001eb ) with HMI on the receiver (Sony STR-DH500) input (Exampel DVD or, SAT, or whatever ...). I select hdmi as a default output and I play a movie ( extention-> .mkv), there is video on the tv but no sound. I search on this forum en I try many solution but The problem is staying .
I play the movies with Cyberlink Power DVD.
I select my output on my pc to HDMI as default (my pc is in Dutch):
In power DVD is the audio HDMi as default selected.
I run Windwos 8.1 PRO.
What do I wrong?
Is there anybody who can help me?
Thanks in advance!
R.

@RW4HP ,
Hello and thank you for posting on the HP support forums. Lets see if we can get your sound issue resolved here.
First thing we will want to do is break down each step in the chain of components.
First thing you will want to try is to connect directly to the display with your notebook and try to play the movie.
If no sound go to the next HDMI input on the Display. NOT THE SONY. If no sound from each of the input ports on the Display. Change the HDMI cable.
Repeat the first steps.
Now if that fails try another DVD. If you are still having a no sound issue try a new media player.
Switch up to VLC media player. The only reason I suggest this one is due to the fact that is a free player and is loaded full of codecs that support almost anything.
VLC Media Player
If this fails to do the job then we shall move on to the removal of the drivers.
Now when you go to uninstall the HDMI driver you will want to do this from safe mode. This will make sure no other drivers or software are live to make a mess of the removal.
Before you remove the drivers though you will want to download the drivers that are the only supported drivers for your system from this link.
HP ENVY 17-j001eb Notebook PC Drivers
Now boot into safe mode and remove the HDMI drivers and the Graphics and Sound drivers.
Windows 8 Safe Mode
Once you have done all this the next thing is to follow the steps for troubleshooting HDMI.
Here are some links.
Connecting a Monitor, Projector or TV (Windows 8)
This next link resolved an issue with no sound when updating to windows 8.1.
HDMI output not working after Windows 8.1 update
Troubleshooting HDMI display and sound issues
Let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Mac 5.1 Audio HDMI In Premiere wrong channels

Hello
I'm trying to create a simple 5.1 mix and running into issues. I'm simply creating a new sequence and choosing 5.1 from the Tracks tab and from there I can drag a WAV onto either a stereo or mono track and in the mixer move the puck within the 5.1 area to send the audio to the desired speakers. It may seem like the front speakers and center are fine But if I move the puck to the the rear left surround speaker it'll come out of my front right speaker. Also If I were to move it to the right surround, it'll end up going to the subwoofer. I'm going audio HDMI out over a displayport to my amp. Amp is showing 7.1 multi channel in. I have also checked using the MIDI tool on the macbook as well and it's correctly mapped.
Just want to point out that the 5.1 channels work perfectly in Adobe Audition CS6 but the problem also persists in Premiere CS6. I must be doing something wrong for Premiere not to work, surely?
Any suggestions? Thanks in advance

I know it's nearly a year later, but I am having almost the exact same issue that you were having reconfig2501. It seems to still be present on Premiere Pro CC (2014) on Windows 8.1. It's great that Premiere is allowing 5.1 audio tracks, but how am I supposed to preview the 5.1 audio on my timeline? If I am editing for HD Broadcast that supports 5.1 channel audio, I shouldn't have to export to ac3 and burn a Blu-Ray/DVD just to preview the 5.1 audio.
See my new thread here with screenshots:
Output Mapping Preference for 5.1 Audio

Help with problems with my HDMI Output to my TV! Help Plz

Problem #1: Tv is overscanning (think thats what its called). It seems to be on top left and right. How do I fix this?
Problem #2: Audio thought HDMI Isnt happening at all Id like it to 5.1 surround sounds but its giving me no audio when I change it to HDMI Output in sound settings. (its detected and I can chose it, it just doesnt work )
Graphics Driver:
xf86_ati_dri
ATI Radeon 4730
Desktop Environment:
GDM
Gnome 3 Shell
XORG 1.11 (or which ever is the newest)
Last edited by kanazky (2011-11-06 01:43:29)

Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
LVDS connected 1920x1080+0+0 (normal left inverted right x axis y axis) 345mm x 194mm
1920x1080 59.9*+
1680x1050 60.0
1400x1050 60.0
1280x1024 59.9
1440x900 59.9
1280x960 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1600mm x 900mm
1920x1080 60.0*+
1920x1080i 30.0
1280x720 60.0
720x480 59.9
640x480 60.0
VGA-0 disconnected (normal left inverted right x axis y axis)
This is my xrandr

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

MPD: ERROR: problems opening audio device

Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error
ERROR: problems opening audio device
This is my mpd.conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/adriaan/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "adriaan"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
group "users"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
#audio_output {
# type "alsa"
# name "Sound Card"
# options "dev=dmixer"
# device "plug:dmix"
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"

milso wrote:
type "alsa"
name "equal"
device "default"
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
I have mine set to plug:plugequal as I use an equalizer with alsa, but when I set it to default it works fine, try that.
That didn't work out.
Mr.Elendig wrote:Tell mpd to be more verbose. And check that mplayer -ao alsa whatever works.
Here's the output of mpd -v
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: daemonized!
daemon: writing pid file
Doesn't contain anything unusual.
EDIT: oh, and mplayer -ao alsa works fine.
Last edited by arthd (2011-02-09 15:14:09)

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Issue / problem adding audio in Presenter 7 (PowerPoint 2010)

Since I got a new PC (Windows 7), I'm having an issue / problem adding audio in Presenter 7 (PowerPoint 2010).
It doesn’t happen every time, but randomly with many presentations...
In PowerPoint, right after I import audio (through Presenter) and click “ok”, I get the following errors:
Then, I can't get into the "import/sync/edit" mode, from the Presenter tab...
Already tried reinstalling Presenter, resaving new presentations, deleting the .ppcx/audio folders, importing the audio locally (vs from my network drive), etc.
Then sometimes, randomly, it will let me get back in and edit the audio, after numerous attempts…?!? I can't figure out what the pattern is, which is causing this new problem (never had this problem before, w/ my old PC - Win XP / PowerPoint 2003 / Presenter 6 & 7)
Anybody have an idea what the issue could be?
Thanks,
Mike P.

Hello,
I tried to reproduce this issue but I am not getting any error message. Please provide us following information; this might help to reproduce this issue:-
1) You are seeing this issue in PPT or PPTX
2) You seeing this issue in newly created presentations or its just old presentation which is not working properly.
3) OS and PowerPoint version
4) If this issue is consistent on any particular presentation then please share it.
5) Can we have exact reproducible steps
Regards,
Shubhi

Help urgently needed: bizarre problem - no audio in imported clip!

Hey there!
I have a bizarre - never the less urgent problem:
When I import some material (presentations) which I have recorded on Mini DV with my Canon MVX10i Camcorder the following problem occurs:
There is one particular presentation which somehow looses the audio during the import process!
That means the imported clip has no audio even though the audfio is on tape! Other clips before and after do not have this problem - the audio is available after the import.
A bizarre but serious problem for me. Any suggestions?
Thanks a lot in advance
Thorge

I had a similar problem. When I started the tape from the beginning no audio would import. To solve it I started the tape a few seconds in and It seemed to work.
Hope this helps.

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

Problem getting audio on a W540

Hi all I have been having some problems getting audio to work on my brand new W540. I have tried everything in terms of driver-updates, bios-updates, software-updates, registry cleaning (cc cleaner), removal and re-installation of drivers, etc. etc. but I am stuck with a little red cross on my speaker icon and the message "No audio output device is installed". I know this to be wrong though because at times I will have sound for a couple of days and then the little red cross pops back on. So I know that the sound works. It seems to be more of a software issue. Currently I am getting a warning that the "DDP UMDF Driver" is deactivated. A bit of googling around tells me that this means the driver (which happens to be an audio driver) is malfunctioning and should be re-installed, but all help as to how that can be done seizes to exist online past this point. Can anyone help me with this problem? I'd hate to have to send the laptop back in for maintenance because I am very dependent on it and because it works well in all other respects. Cheers Jakob

Having retried reinstalling with the recovery discs I was reminded what my problem was. I can't seem to get the system to boot up from the discs. Following the instructions from this link:
http://support.lenovo.com/us/en/documents/ht075445#win8_1 I go into the boot sequence and change it so that the external DVD drive (and anything that remotely sounds like it could be an external DVD drive) is on top (See below), but when I save and restart the computer simply restarts into windows instead of starting the recovery process with the discs. What am I doing wrong?

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

Problema uscita audio HDMI

Similar Messages

Maybe you are looking for