Problematic Dell Vostro Audio System

Hi,
I am facing problems with the audio system in my Dell Vostro laptop. The sound loses clarity at a high volume and does not give a good listening experience. Can somebody give me a helpful suggestion?
Regards
Joseph White Wolf

Hello. Does it do it both with the speakers and also when listening through headphones? If just speakers then they might need to be replaced.
It would be helpful if you were to provide
> the full model name of your Vostro series laptop
> its operating system

Similar Messages

Dell Vostro New System Questions

I was looking into purchasing a Dell Vostro system for video editing with the Production Premium.
I heard that the XPS systems are made more specifically for video editing, but the Vostro I was looking into seems to have comparable specs to an XPS system.
Here are the main specs:
Intel Core 2 Quad Proc Q6600 (2.40GHz,8MB L2Cache,1066FSB)
4 GB DDR2 NON-ECC SDRAM 800MHz (4 DIMMs)
256MB NVIDIA GeForce 8600M GT
500 GB SATA Hard Drive (7200 RPM) (I know I may have to add another hd).
Has anyone had any experiences with the Vostro or would know if this should work well?
Thanks!

>Vostro's have (at least mine has) room for only one additional hard drive.
I'd pass by any prebuilt computer that doesn't allow you to have at least 5 total internal hard drives and two optical drives, or allow you to change out the power supply, or add in or otherwise change the GPU and sound card. Those features are pretty much standard with any decent case, and all prebuilt computers should have such a case.

MTRR allocation problem on Dell Vostro

Hello good people,
I am having MTRR messages from kernel and a warning that graphics performance may suffer. I know from the sparse mtrr documentation around that I can set them up as I want and everything should work but after trying several changes, the only thing I have managed to do it get a horribly slow laptop.
I am running 64bit Arch on Dell Vostro 3550. I have 6GB ram and a hybrid video card setup with an Intel card and an ATI one. I am using the proprietary Catalyst driver and I also have the intel driver installed.
Here we go...
Kernel message.
$dmesg | grep -i mtrr
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] MTRR variable ranges enabled:
[ 17.262434] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 17.262437] [drm] MTRR allocation failed. Graphics performance may suffer.
I noticed in /proc/config.gz that I don't have MTRR cleanup enabled by default so I tried adding enable_mtrr_cleanup to the boot line but I still don't get a good mtrr.
$zgrep MTRR /proc/config.gz
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
Now here is the mtrr I would like to repair. Notice that the memory range in reg 0 is 8192MB. Why? Reg 3 should be the range for the intel card since that's the address I get from lspci -vv as you will see. Similary, reg 4 is mapping for the ATI radeon card. According to what I have read, I want to have these as write-combining. The other ranges I have no idea why they are there which complicates my attempts at fixing the mtrr.
$cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back
reg01: base=0x0cb800000 ( 3256MB), size= 8MB, count=1: uncachable
reg02: base=0x0cc000000 ( 3264MB), size= 64MB, count=1: uncachable
reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable
reg04: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable
reg05: base=0x1afe00000 ( 6910MB), size= 2MB, count=1: uncachable
reg06: base=0x1b0000000 ( 6912MB), size= 256MB, count=1: uncachable
reg07: base=0x1c0000000 ( 7168MB), size= 1024MB, count=1: uncachable
Here is the lspci output.
$lspci -vv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f7c0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: f6800000-f78fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 49
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] (prog-if 00 [VGA controller])
Subsystem: Dell Device 04cd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f7b20000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at f7b00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Dell Device 04b3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f1104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
Subsystem: Dell Device 04b3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f7910000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Finally, here is the Xorg log.
$cat /var/log/Xorg.0.log
[ 22.722]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 22.744] X Protocol Version 11, Revision 0
[ 22.744] Build Operating System: Linux 3.2.2-1-ARCH x86_64
[ 22.744] Current Operating System: Linux bitlab 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[ 22.744] Kernel command line: root=/dev/mapper/arch--volume-lvroot ro
[ 22.744] Build Date: 29 January 2012 03:38:00PM
[ 22.744]
[ 22.744] Current version of pixman: 0.24.4
[ 22.744] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.744] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.744] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 19 10:29:00 2012
[ 22.807] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.828] (==) ServerLayout "aticonfig Layout"
[ 22.828] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 22.828] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 22.829] (**) | |-->Device "aticonfig-Device[0]-0"
[ 22.829] (==) Automatically adding devices
[ 22.829] (==) Automatically enabling devices
[ 22.881] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.881] Entry deleted from font path.
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 22.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22.882] Entry deleted from font path.
[ 22.882] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 22.882] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 22.882] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.882] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.882] (II) Loader magic: 0x7ccae0
[ 22.882] (II) Module ABI versions:
[ 22.882] X.Org ANSI C Emulation: 0.4
[ 22.882] X.Org Video Driver: 11.0
[ 22.882] X.Org XInput driver : 13.0
[ 22.882] X.Org Server Extension : 6.0
[ 22.883] (--) PCI:*(0:0:2:0) 8086:0126:1028:04cd rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 22.883] (--) PCI: (0:1:0:0) 1002:6741:1028:04cd rev 0, Mem @ 0xe0000000/268435456, 0xf7b20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 22.883] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.883] (II) "extmod" will be loaded by default.
[ 22.883] (II) "dbe" will be loaded by default.
[ 22.883] (II) "glx" will be loaded by default.
[ 22.883] (II) "record" will be loaded by default.
[ 22.883] (II) "dri" will be loaded by default.
[ 22.883] (II) "dri2" will be loaded by default.
[ 22.883] (II) LoadModule: "extmod"
[ 22.934] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.935] (II) Module extmod: vendor="X.Org Foundation"
[ 22.935] compiled for 1.11.4, module version = 1.0.0
[ 22.935] Module class: X.Org Server Extension
[ 22.935] ABI class: X.Org Server Extension, version 6.0
[ 22.935] (II) Loading extension MIT-SCREEN-SAVER
[ 22.935] (II) Loading extension XFree86-VidModeExtension
[ 22.935] (II) Loading extension XFree86-DGA
[ 22.935] (II) Loading extension DPMS
[ 22.935] (II) Loading extension XVideo
[ 22.935] (II) Loading extension XVideo-MotionCompensation
[ 22.935] (II) Loading extension X-Resource
[ 22.935] (II) LoadModule: "dbe"
[ 22.935] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.936] (II) Module dbe: vendor="X.Org Foundation"
[ 22.936] compiled for 1.11.4, module version = 1.0.0
[ 22.936] Module class: X.Org Server Extension
[ 22.936] ABI class: X.Org Server Extension, version 6.0
[ 22.936] (II) Loading extension DOUBLE-BUFFER
[ 22.936] (II) LoadModule: "glx"
[ 22.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.951] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 22.951] compiled for 6.9.0, module version = 1.0.0
[ 22.952] (II) Loading extension GLX
[ 22.952] (II) LoadModule: "record"
[ 22.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.957] (II) Module record: vendor="X.Org Foundation"
[ 22.957] compiled for 1.11.4, module version = 1.13.0
[ 22.957] Module class: X.Org Server Extension
[ 22.957] ABI class: X.Org Server Extension, version 6.0
[ 22.957] (II) Loading extension RECORD
[ 22.957] (II) LoadModule: "dri"
[ 22.958] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.965] (II) Module dri: vendor="X.Org Foundation"
[ 22.965] compiled for 1.11.4, module version = 1.0.0
[ 22.965] ABI class: X.Org Server Extension, version 6.0
[ 22.965] (II) Loading extension XFree86-DRI
[ 22.965] (II) LoadModule: "dri2"
[ 22.965] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.966] (II) Module dri2: vendor="X.Org Foundation"
[ 22.966] compiled for 1.11.4, module version = 1.2.0
[ 22.966] ABI class: X.Org Server Extension, version 6.0
[ 22.966] (II) Loading extension DRI2
[ 22.966] (II) LoadModule: "fglrx"
[ 22.966] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.148] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 23.154] compiled for 1.4.99.906, module version = 8.96.4
[ 23.154] Module class: X.Org Video Driver
[ 23.156] (II) Loading sub module "fglrxdrm"
[ 23.156] (II) LoadModule: "fglrxdrm"
[ 23.156] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.183] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.183] compiled for 1.4.99.906, module version = 8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[ 23.192] (II) ATI Proprietary Linux Driver Release Identifier: 8.961
[ 23.192] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2012 23:06:21
[ 23.192] (++) using VT number 7
[ 23.195] (WW) Falling back to old probe method for fglrx
[ 23.260] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.263] (--) Chipset Supported AMD Graphics Processor (0x6741) found
[ 23.264] (II) fglrx: intel VGA device detected, load intel driver.
[ 23.264] (II) LoadModule: "intel"
[ 23.264] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.296] (II) Module intel: vendor="X.Org Foundation"
[ 23.296] compiled for 1.11.2, module version = 2.17.0
[ 23.296] Module class: X.Org Video Driver
[ 23.296] ABI class: X.Org Video Driver, version 11.0
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiDynamicMajor: found major device number 251
[ 23.298] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 23.298] ukiOpenDevice: node name is /dev/ati/card0
[ 23.298] ukiOpenDevice: open result is 7, (OK)
[ 23.298] ukiOpenByBusid: ukiOpenMinor returns 7
[ 23.298] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 23.300] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.301] (II) AMD Video driver is signed
[ 23.301] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 23.301] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.301] (II) fglrx(0): pEnt->device->identifier=0x100a450
[ 23.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.302] (II) intel(1): pEnt->device->identifier=(nil)
[ 23.302] (EE) Screen 1 deleted because of no matching config section.
[ 23.302] (II) UnloadModule: "intel"
[ 23.302] (II) Unloading intel
[ 23.302] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 23.302] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[ 23.798] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.801] drmOpenDevice: node name is /dev/dri/card0
[ 23.801] drmOpenDevice: open result is 12, (OK)
[ 23.801] drmOpenByBusid: drmOpenMinor returns 12
[ 23.801] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.801] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.801] (==) fglrx(0): RGB weight 888
[ 23.801] (==) fglrx(0): Default visual is TrueColor
[ 23.802] (**) fglrx(0): Option "Tiling" "off"
[ 23.802] (**) fglrx(0): Option "LinearFramebuffer" "on"
[ 23.802] (**) fglrx(0): Option "Shadow" "off"
[ 23.802] (II) fglrx(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.802] (**) fglrx(0): ChipID override: 0x0126
[ 23.802] (**) fglrx(0): ChipRev override: 9
[ 23.802] (**) fglrx(0): Chipset: "Sandybridge Mobile (GT2+)"
[ 23.802] (**) fglrx(0): Relaxed fencing enabled
[ 23.802] (**) fglrx(0): Wait on SwapBuffers? enabled
[ 23.802] (**) fglrx(0): Triple buffering? enabled
[ 23.802] (**) fglrx(0): Framebuffer linear
[ 23.802] (**) fglrx(0): Pixmaps linear
[ 23.802] (**) fglrx(0): 3D buffers tiled
[ 23.802] (**) fglrx(0): SwapBuffers wait enabled
[ 23.802] (==) fglrx(0): video overlay key set to 0x101fe
[ 23.802] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[ 23.802] (II) fglrx(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 23.802] (II) fglrx(0): Output VGA1 has no monitor section
[ 23.825] (II) fglrx(0): Output HDMI1 has no monitor section
[ 23.863] (II) fglrx(0): Output DP1 has no monitor section
[ 23.863] (II) fglrx(0): EDID for output LVDS1
[ 23.863] (II) fglrx(0): Manufacturer: LGD Model: 2e3 Serial#: 0
[ 23.863] (II) fglrx(0): Year: 2010 Week: 0
[ 23.863] (II) fglrx(0): EDID Version: 1.4
[ 23.863] (II) fglrx(0): Digital Display Input
[ 23.863] (II) fglrx(0): 6 bits per channel
[ 23.863] (II) fglrx(0): Digital interface is undefined
[ 23.863] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 23.863] (II) fglrx(0): Gamma: 2.20
[ 23.863] (II) fglrx(0): No DPMS capabilities specified
[ 23.863] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 23.863] (II) fglrx(0): First detailed timing is preferred mode
[ 23.863] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 23.863] (II) fglrx(0): redX: 0.613 redY: 0.371 greenX: 0.350 greenY: 0.606
[ 23.863] (II) fglrx(0): blueX: 0.152 blueY: 0.099 whiteX: 0.313 whiteY: 0.329
[ 23.863] (II) fglrx(0): Manufacturer's mask: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 76.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 810 v_border: 0
[ 23.863] (II) fglrx(0): Supported detailed timing:
[ 23.863] (II) fglrx(0): clock: 51.0 MHz Image Size: 344 x 194 mm
[ 23.863] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1564 h_border: 0
[ 23.863] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 814 v_border: 0
[ 23.863] (II) fglrx(0): PPCTF156WH4
[ 23.863] (II) fglrx(0): Unknown vendor-specific block 0
[ 23.863] (II) fglrx(0): EDID (in hex):
[ 23.863] (II) fglrx(0): 00ffffffffffff0030e4e30200000000
[ 23.863] (II) fglrx(0): 00140104902213780a09159d5f599b27
[ 23.863] (II) fglrx(0): 19505400000001010101010101010101
[ 23.863] (II) fglrx(0): 010101010101b01d56c650002a302430
[ 23.863] (II) fglrx(0): 350058c210000019ec1356c650002e30
[ 23.863] (II) fglrx(0): 2430350058c210000019000000fe0050
[ 23.863] (II) fglrx(0): 50435446803135365748340a00000000
[ 23.863] (II) fglrx(0): 00004131960000000001010a202000ef
[ 23.863] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 23.863] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 23.863] (II) fglrx(0): Printing probed modes for output LVDS1
[ 23.863] (II) fglrx(0): Modeline "1366x768"x60.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1366x768"x40.1 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 23.863] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.863] (II) fglrx(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.863] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.863] (II) fglrx(0): EDID for output VGA1
[ 23.887] (II) fglrx(0): EDID for output HDMI1
[ 23.926] (II) fglrx(0): EDID for output DP1
[ 23.973] (II) fglrx(0): Output LVDS1 connected
[ 23.973] (II) fglrx(0): Output VGA1 disconnected
[ 23.973] (II) fglrx(0): Output HDMI1 disconnected
[ 23.973] (II) fglrx(0): Output DP1 disconnected
[ 23.973] (II) fglrx(0): Using exact sizes for initial modes
[ 23.973] (II) fglrx(0): Output LVDS1 using initial mode 1366x768
[ 23.973] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.973] (II) fglrx(0): Kernel page flipping support detected, enabling
[ 23.973] (**) fglrx(0): Display dimensions: (340, 190) mm
[ 23.973] (**) fglrx(0): DPI set to (102, 102)
[ 23.973] (II) Loading sub module "fb"
[ 23.973] (II) LoadModule: "fb"
[ 23.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.133] (II) Module fb: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.0.0
[ 24.133] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.133] (II) Loading sub module "dri2"
[ 24.133] (II) LoadModule: "dri2"
[ 24.133] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.133] (II) Module dri2: vendor="X.Org Foundation"
[ 24.133] compiled for 1.11.4, module version = 1.2.0
[ 24.133] ABI class: X.Org Server Extension, version 6.0
[ 24.133] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.133] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.133] (==) fglrx(0): Default visual is TrueColor
[ 24.133] (**) fglrx(0): Option "DPMS" "true"
[ 24.133] (==) fglrx(0): RGB weight 888
[ 24.133] (II) fglrx(0): Using 8 bits per RGB
[ 24.133] (==) fglrx(0): Buffer Tiling is ON
[ 24.133] (II) Loading sub module "fglrxdrm"
[ 24.133] (II) LoadModule: "fglrxdrm"
[ 24.133] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.133] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.133] compiled for 1.4.99.906, module version = 8.96.4
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiDynamicMajor: found major device number 251
[ 24.134] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.134] ukiOpenDevice: node name is /dev/ati/card0
[ 24.134] ukiOpenDevice: open result is 13, (OK)
[ 24.134] ukiOpenByBusid: ukiOpenMinor returns 13
[ 24.134] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.135] (**) fglrx(0): NoAccel = NO
[ 24.135] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.135] (--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
[ 24.135] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x04cd)
[ 24.135] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.135] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 24.135] (--) fglrx(0): MMIO registers at 0xf7b20000
[ 24.135] (--) fglrx(0): I/O port at 0x0000e000
[ 24.135] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.157] (II) fglrx(0): AC Adapter is used
[ 24.236] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 24.236] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 24.236] (II) fglrx(0): PCIE card detected
[ 24.236] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 24.236] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 24.241] (II) fglrx(0): Using adapter: 1:0.0.
[ 24.248] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 24.274] (II) fglrx(0): Interrupt handler installed at IRQ 55.
[ 24.274] (II) fglrx(0): RandR 1.2 support is enabled!
[ 24.274] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 24.274] (==) fglrx(0): Center Mode is disabled
[ 24.274] (II) Loading sub module "fb"
[ 24.274] (II) LoadModule: "fb"
[ 24.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.274] (II) Module fb: vendor="X.Org Foundation"
[ 24.274] compiled for 1.11.4, module version = 1.0.0
[ 24.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.274] (II) Loading sub module "ddc"
[ 24.274] (II) LoadModule: "ddc"
[ 24.274] (II) Module "ddc" already built-in
[ 24.388] (II) fglrx(0): Finished Initialize PPLIB!
[ 24.396] (II) fglrx(0): Eyefinity capable adapter detected.
[ 24.397] (II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 6 configurable heads and 0 displays connected.
[ 24.397] (==) fglrx(0): PseudoColor visuals disabled
[ 24.397] (II) Loading sub module "ramdac"
[ 24.397] (II) LoadModule: "ramdac"
[ 24.397] (II) Module "ramdac" already built-in
[ 24.397] (==) fglrx(0): NoDRI = NO
[ 24.397] (==) fglrx(0): Capabilities: 0x00000000
[ 24.397] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 24.397] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 24.397] (==) fglrx(0): UseFastTLS=0
[ 24.397] (--) Depth 24 pixmap format is 32 bpp
[ 24.397] (II) LoadModule: "glesx"
[ 24.458] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 24.594] (II) Module glesx: vendor="X.Org Foundation"
[ 24.594] compiled for 1.4.99.906, module version = 1.0.0
[ 24.594] (II) Loading extension GLESX
[ 24.606] (II) fglrx(0): [DRI2] Setup complete
[ 24.606] (II) fglrx(0): [DRI2] DRI driver: i965
[ 24.606] (II) fglrx(0): Allocated new frame buffer 1408x768 stride 5632, untiled
[ 24.610] (II) UXA(0): Driver registered support for the following operations:
[ 24.610] (II) solid
[ 24.610] (II) copy
[ 24.610] (II) composite (RENDER acceleration)
[ 24.610] (II) put_image
[ 24.610] (II) get_image
[ 24.610] (==) fglrx(0): Backing store disabled
[ 24.610] (==) fglrx(0): Silken mouse enabled
[ 24.610] (II) fglrx(0): Initializing HW Cursor
[ 24.666] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 24.667] (**) fglrx(0): DPMS enabled
[ 24.667] (==) fglrx(0): Intel XvMC decoder enabled
[ 24.667] (II) fglrx(0): Set up textured video
[ 24.667] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[ 24.667] (II) fglrx(0): direct rendering: DRI2 Enabled
[ 24.667] (WW) fglrx(0): Option "VendorName" is not used
[ 24.667] (WW) fglrx(0): Option "ModelName" is not used
[ 24.667] (WW) fglrx(0): Option "Shadow" is not used
[ 24.667] (WW) fglrx(0): Option "Tiling" is not used
[ 24.667] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.667] (==) fglrx(0): hotplug detection: "enabled"
[ 24.668] (II) Loading extension ATIFGLRXDRI
[ 24.668] (II) fglrx(0): doing swlDriScreenInit
[ 24.668] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiDynamicMajor: found major device number 251
[ 24.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.668] ukiOpenDevice: node name is /dev/ati/card0
[ 24.668] ukiOpenDevice: open result is 15, (OK)
[ 24.668] ukiOpenByBusid: ukiOpenMinor returns 15
[ 24.668] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.668] (II) fglrx(0): [uki] DRM interface version 1.0
[ 24.668] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 24.668] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 24.668] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9e27b95000
[ 24.668] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 24.668] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 24.668] (II) fglrx(0): swlDriScreenInit done
[ 24.668] (II) fglrx(0): Kernel Module Version Information:
[ 24.668] (II) fglrx(0): Name: fglrx
[ 24.668] (II) fglrx(0): Version: 8.96.4
[ 24.668] (II) fglrx(0): Date: Apr 5 2012
[ 24.668] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 24.668] (II) fglrx(0): Kernel Module version matches driver.
[ 24.668] (II) fglrx(0): Kernel Module Build Time Information:
[ 24.668] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.3.6-1-ARCH
[ 24.668] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 24.668] (II) fglrx(0): Build-Kernel __SMP__: no
[ 24.668] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 24.668] (II) fglrx(0): [uki] register handle = 0x00004000
[ 24.699] (II) fglrx(0): DRI initialization successfull
[ 24.699] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
[ 24.699] (II) fglrx(0): Intel display surface mc addr for AMD: 8fce0000
[ 24.700] (==) fglrx(0): Backing store disabled
[ 24.700] (II) Loading extension FGLRXEXTENSION
[ 24.700] (**) fglrx(0): DPMS enabled
[ 24.700] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 24.700] (**) fglrx(0): Textured Video is enabled.
[ 24.700] (II) fglrx(0): GLESX enableFlags = 848
[ 24.700] (II) fglrx(0): GLESX is enabled
[ 24.700] (II) LoadModule: "amdxmm"
[ 24.701] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 24.709] (II) Module amdxmm: vendor="X.Org Foundation"
[ 24.709] compiled for 1.4.99.906, module version = 2.0.0
[ 24.709] (II) Loading extension AMDXVOPL
[ 24.709] (II) Loading extension AMDXVBA
[ 24.709] XvScreenInit: screen devPrivates ptr non-NULL before init
[ 24.721] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 24.723] (II) fglrx(0): Enable composite support successfully
[ 24.723] (WW) fglrx(0): Option "VendorName" is not used
[ 24.723] (WW) fglrx(0): Option "ModelName" is not used
[ 24.723] (WW) fglrx(0): Option "Shadow" is not used
[ 24.723] (WW) fglrx(0): Option "Tiling" is not used
[ 24.723] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[ 24.723] (II) fglrx(0): X context handle = 0x1
[ 24.723] (II) fglrx(0): [DRI] installation complete
[ 24.736] (--) RandR disabled
[ 24.736] (II) Initializing built-in extension Generic Event Extension
[ 24.736] (II) Initializing built-in extension SHAPE
[ 24.736] (II) Initializing built-in extension MIT-SHM
[ 24.736] (II) Initializing built-in extension XInputExtension
[ 24.736] (II) Initializing built-in extension XTEST
[ 24.736] (II) Initializing built-in extension BIG-REQUESTS
[ 24.736] (II) Initializing built-in extension SYNC
[ 24.736] (II) Initializing built-in extension XKEYBOARD
[ 24.736] (II) Initializing built-in extension XC-MISC
[ 24.736] (II) Initializing built-in extension SECURITY
[ 24.736] (II) Initializing built-in extension XINERAMA
[ 24.736] (II) Initializing built-in extension XFIXES
[ 24.736] (II) Initializing built-in extension RENDER
[ 24.736] (II) Initializing built-in extension RANDR
[ 24.736] (II) Initializing built-in extension COMPOSITE
[ 24.736] (II) Initializing built-in extension DAMAGE
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiDynamicMajor: found major device number 251
[ 24.737] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.737] ukiOpenDevice: node name is /dev/ati/card0
[ 24.737] ukiOpenDevice: open result is 16, (OK)
[ 24.737] ukiOpenByBusid: ukiOpenMinor returns 16
[ 24.737] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.513] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 25.597] (II) fglrx(0): Enable the clock gating!
[ 25.597] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 25.834] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 25.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.834] (II) LoadModule: "evdev"
[ 25.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (II) Module evdev: vendor="X.Org Foundation"
[ 25.840] compiled for 1.10.99.902, module version = 2.6.0
[ 25.840] Module class: X.Org XInput Driver
[ 25.840] ABI class: X.Org XInput driver, version 13.0
[ 25.840] (II) Using input driver 'evdev' for 'Power Button'
[ 25.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.840] (**) Power Button: always reports core events
[ 25.840] (**) Power Button: Device: "/dev/input/event6"
[ 25.840] (--) Power Button: Found keys
[ 25.840] (II) Power Button: Configuring as keyboard
[ 25.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 25.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.840] (**) Option "xkb_rules" "evdev"
[ 25.840] (**) Option "xkb_model" "evdev"
[ 25.840] (**) Option "xkb_layout" "us"
[ 25.868] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 25.868] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.868] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.868] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event12"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 25.869] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Video Bus: always reports core events
[ 25.869] (**) Video Bus: Device: "/dev/input/event11"
[ 25.869] (--) Video Bus: Found keys
[ 25.869] (II) Video Bus: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input11/event11"
[ 25.869] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.869] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.869] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.869] (II) Using input driver 'evdev' for 'Power Button'
[ 25.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.869] (**) Power Button: always reports core events
[ 25.869] (**) Power Button: Device: "/dev/input/event4"
[ 25.869] (--) Power Button: Found keys
[ 25.869] (II) Power Button: Configuring as keyboard
[ 25.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 25.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 25.869] (**) Option "xkb_rules" "evdev"
[ 25.869] (**) Option "xkb_model" "evdev"
[ 25.869] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 25.870] (II) No input driver specified, ignoring this device.
[ 25.870] (II) This device may have been added with another device file.
[ 25.870] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 25.870] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Sleep Button'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Sleep Button: always reports core events
[ 25.870] (**) Sleep Button: Device: "/dev/input/event5"
[ 25.870] (--) Sleep Button: Found keys
[ 25.870] (II) Sleep Button: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 25.870] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.870] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event8)
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
[ 25.870] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
[ 25.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: always reports core events
[ 25.870] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event8"
[ 25.870] (--) Laptop_Integrated_Webcam_FHD: Found keys
[ 25.870] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
[ 25.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8/event8"
[ 25.870] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD, id 11)
[ 25.870] (**) Option "xkb_rules" "evdev"
[ 25.870] (**) Option "xkb_model" "evdev"
[ 25.870] (**) Option "xkb_layout" "us"
[ 25.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[ 25.871] (II) No input driver specified, ignoring this device.
[ 25.871] (II) This device may have been added with another device file.
[ 25.871] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 25.871] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 25.871] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.871] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.871] (**) Logitech USB Receiver: always reports core events
[ 25.871] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[ 25.871] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 25.871] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.871] (--) Logitech USB Receiver: Found relative axes
[ 25.871] (--) Logitech USB Receiver: Found x and y relative axes
[ 25.871] (II) Logitech USB Receiver: Configuring as mouse
[ 25.871] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.871] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.871] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.871] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.0/input/input1/event1"
[ 25.871] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 25.871] (II) Logitech USB Receiver: initialized for relative axes.
[ 25.871] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.871] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 25.872] (II) No input driver specified, ignoring this device.
[ 25.872] (II) This device may have been added with another device file.
[ 25.872] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 25.872] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) Logitech USB Receiver: always reports core events
[ 25.872] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 25.872] (--) Logitech USB Receiver: Found 1 mouse buttons
[ 25.872] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 25.872] (--) Logitech USB Receiver: Found relative axes
[ 25.872] (--) Logitech USB Receiver: Found absolute axes
[ 25.872] (--) Logitech USB Receiver: Found keys
[ 25.872] (II) Logitech USB Receiver: Configuring as mouse
[ 25.872] (II) Logitech USB Receiver: Configuring as keyboard
[ 25.872] (II) Logitech USB Receiver: Adding scrollwheel support
[ 25.872] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 25.872] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb2/2-1/2-1:1.1/input/input2/event2"
[ 25.872] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 25.872] (**) Option "xkb_rules" "evdev"
[ 25.872] (**) Option "xkb_model" "evdev"
[ 25.872] (**) Option "xkb_layout" "us"
[ 25.872] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[ 25.872] (II) Logitech USB Receiver: initialized for absolute axes.
[ 25.872] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 25.872] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 25.872] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.872] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.872] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.872] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.872] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.872] (--) AT Translated Set 2 keyboard: Found keys
[ 25.872] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.872] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 25.872] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 25.873] (**) Option "xkb_rules" "evdev"
[ 25.873] (**) Option "xkb_model" "evdev"
[ 25.873] (**) Option "xkb_layout" "us"
[ 25.873] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.873] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 25.873] (II) LoadModule: "synaptics"
[ 25.873] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.883] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.884] compiled for 1.11.0, module version = 1.5.0
[ 25.884] Module class: X.Org XInput Driver
[ 25.884] ABI class: X.Org XInput driver, version 13.0
[ 25.884] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 25.884] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "Device" "/dev/input/event10"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 25.884] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 25.884] (**) Option "TapButton1" "1"
[ 25.884] (**) Option "TapButton2" "2"
[ 25.884] (**) Option "TapButton3" "3"
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.884] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 25.884] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[ 25.884] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 25.884] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 25.884] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.885] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
[ 25.885] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 25.885] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) DualPoint Stick: always reports core events
[ 25.885] (**) DualPoint Stick: Device: "/dev/input/event9"
[ 25.885] (--) DualPoint Stick: Found 3 mouse buttons
[ 25.885] (--) DualPoint Stick: Found relative axes
[ 25.885] (--) DualPoint Stick: Found x and y relative axes
[ 25.885] (II) DualPoint Stick: Configuring as mouse
[ 25.885] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 25.885] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.885] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 25.885] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 16)
[ 25.885] (II) DualPoint Stick: initialized for relative axes.
[ 25.885] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 25.885] (**) DualPoint Stick: (accel) acceleration profile 0
[ 25.885] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 25.885] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 25.885] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[ 25.885] (II) No input driver specified, ignoring this device.
[ 25.885] (II) This device may have been added with another device file.
[ 25.885] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 25.885] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 25.885] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 25.885] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.885] (**) Dell WMI hotkeys: always reports core events
[ 25.885] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[ 25.885] (--) Dell WMI hotkeys: Found keys
[ 25.885] (II) Dell WMI hotkeys: Configuring as keyboard
[ 25.885] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 25.885] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 25.885] (**) Option "xkb_rules" "evdev"
[ 25.886] (**) Option "xkb_model" "evdev"
[ 25.886] (**) Option "xkb_layout" "us"
[ 25.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 39.128] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 39.128] (II) fglrx(0): Printing DDC gathered Modelines:
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 39.128] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 52.382] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 52.382] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 52.382] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 53.649] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 53.649] (II) fglrx(0): Printing DDC gathered Modelines:
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 53.649] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.483] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.483] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.483] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.551] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.551] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.551] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.619] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.619] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.619] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.686] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.686] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.686] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.751] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.751] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.751] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.816] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.816] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.816] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 54.900] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 54.900] (II) fglrx(0): Printing DDC gathered Modelines:
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 54.900] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.376] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.377] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.377] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.459] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.459] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.459] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.460] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.547] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.547] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.547] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.625] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.625] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.625] (II) fglrx(0): Modeline "1366x768"x0.0 51.00 1366 1402 1450 1564 768 771 776 814 -hsync -vsync (32.6 kHz)
[ 55.697] (II) fglrx(0): EDID vendor "LGD", prod id 739
[ 55.697] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0 76.00 1366 1402 1450 1564 768 771 776 810 -hsync -vsync (48.6 kHz)
[ 55.697] (II) fglrx(0): Modeline "1366x768"x0.0

Hello,
i get the same messages without any problems for my intel card.
You can read more about it in this thread:
http://forums.gentoo.org/viewtopic-t-85 … ec66f93bf2
There are a fair amount of people who have posted their /proc/mtrr there, you can compare yours to them.
In the end they come to the conclusion, that uncachable entries are not a problem, for the most systems.
However uncachable regions of 1024MB seem to be too large.
On my mtrr the biggest uncachable entry is 64MB.
So you might get improvement from solving this.

My Mouse pad alway error ( Stop Working ) when I use firefox browser ! I Try To Reinstall Firefox And Reinstall my OS but it Can not helps ! My Computer Is : Dell Vostro V 130 , Windows 7 64-bit Home Premium !! Pls Help Me !!

My Mose Pad Has Stop Working ! But My external mouse ( laser Mouse ) can work , i try to install other version of firefox ( thunder bird, aurora) but it still the same , even if I reinstall my windows ( my OS is Windows 64-bit Home Premium ) My Computer is Dell Vostro V130.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

XNET and Dell Vostro

I've had a problem for quite awhile trying to use my Dell Vostro 1510 to connect to a PXI system but now it has become imperative that I get this to work since I need to make changes to a system offsite.
Once I load NI-CAN and NI-XNET, I can no longer connect to my PXI, Remote Systems goes away in MAX, error regarding "canexperts" is displayed, and no Software is even listed in MAX.
I have no problems when using my Dell desktop.
I've downloaded "Dependency Walker" and have attached the file. I've downloaded and installed all the latest drivers for MAX.
Not sure where to go from here. I need to get this laptop working with the PXI. Any clues would be appreciated!
Attachments:
NIMaxTS.txt ‏708 KB

I've attached some screen shots. NoCAN.jpg shows the software installed with just XNET.
Clickonsw.jpg shows the error message that appears when I click on the + in front of software.
NoRemote.jpg shows how MAX looks after I answer NO to the error message. I didn't capture it on the first picture but my remote system shows up before I install the CAN software. After, it disappears.
GPIB Guru, I believe there is only one version of XNET (1.0) which includes CAN 2.7. A different message used to occur with earlier versions of CAN (a dll failed to initialize or something close).
I'm leaning toward a problem with the BIOS of the laptop. I'm not going to install on another machine since it works on my desktop. The main issue is that I need it on my laptop because I have to travel out of the country to make changes on a PXI system and I cannot lug a desktop with me! Unfortunately the only other laptop available here at work is the exact same model that we use for PLC type machines.
I'm hoping I can find a workaround for this issue.
Thanks for the input! Any more thoughts are appreciated.
Attachments:
NoCAN.jpg ‏530 KB
Clickonsw.jpg ‏85 KB
NoRemote.jpg ‏36 KB

Troubles with dell vostro 1400

recently buy a dell vostro 1400 with vista, first install ubuntu and then with internet install arch, but something strange happen with arch, the processor fan work too much, ok, runung kde s normal, but with an base install(no X,kde) the fan work at full, use cpudyn/cpufreq to control the speed but happen, with ubuntu not troubles, and even with vista the fan doesn work to much, only when see movies, but with arch even with init3 the fan enouth for me, meybe do something wrong or miss ??
currently my installation use cpudyn.

Is your CPU overheating? I'd install lm_sensors and see how high the temperature is going. You should do this for all three (Ubuntu, Arch, Vista) if you can and compare what the temperatures are. My guess is that the arch install just has a more cautious approach to cooling. If the temperature is staying constantly above 65C then that would be the problem. Try scaling your CPU down further using cpufreq. Check that it's working by doing as root:
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
This will tell you what your current CPU speed is. If it never goes below maximum then that is the problem.

JMF on Dell Vostro 200 JMF not working

We have new Dell Vostro 200 and the JMF does not work.

Gee. Tom_Jansen, what a useful response. The audio chipset in the Vostro appears not to be compatible with JMF, a software product that hasn't been updated in several years. The user is looking for some assistance, maybe a firmware update someone knows about or has tested, or a patch to JMF. You have an unfortunate existence if the extent of your knowledge is to post responses like that.

Dell vostro a860, headphones mute the speaker but no sound

Hello all,
I just installed latest arch, updated to the latest. Using ALSA for sound.
Everything works fine, just when I plug in the headphones - they mute the speakers - but no sound in the headphones.
The headphones work for sure.
alsamixer -> everything there is unmuted and volume raised to 100.
The laptop is dell vostro a860, sound chipset: HDA Intel Conexant CX20561 (Hermosa).
Any suggestions?
Thanks,
Ivo

If you are using hda-intel audio driver, try adding
options snd-hda-intel model=
followed by one of this model name in your /etc/modprobe.d/modprobe.conf.
For example you can try with "options snd-hda-intel model=auto" and the if it doesn't work try another one that can match with you card model.
Last edited by Babets (2009-08-13 08:35:14)

Dell Vostro 3500 laptop imaging

We are running ZCM10.3.1 on the server. We purchased several new Dell
vostro 3500 laptops with exact same hardware configuration. We created
an image off one of the laptops. Then test the image by pulling the
image down to a different laptop (exactly the same hardware
configuration Dell vostro 3500) and then got the error saying hardware
changed and cannot boot. We put a dell restoration disk to have the
laptop boot into the disk and did repair from the disk. The laptop boot
up fine after the repair.
Can someone give me some idea what might be going on? I am clueless.
Thanks a lot!

April,
> We are running ZCM10.3.1 on the server. We purchased several new Dell
> vostro 3500 laptops with exact same hardware configuration. We created
> an image off one of the laptops. Then test the image by pulling the
> image down to a different laptop (exactly the same hardware
> configuration Dell vostro 3500) and then got the error saying hardware
> changed and cannot boot. We put a dell restoration disk to have the
> laptop boot into the disk and did repair from the disk. The laptop boot
> up fine after the repair.
>
Can you try the same thing with the latest imaging (10.3.3 or 11). Ie do a
manual image same/restore with an imaging CD. Saves you having to update
all of your backend.
If it works then, then we will know how to proceed.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Dell Vostro 1310, Close lid, Freeze

I just installed arch on my old Dell Vostro 1310.
It is a very fresh and simple install. The only packages I have installed are wget and sshd.
I.e I have no acpid running.
I have set HandleLidClose to ignore in logind.conf, but when I close the lid something happens and the laptop freezes.
ssh access also dies, and fans stop, so it is not just the screen.
What could be the issue here?
[EDIT]
Just noticed a strange workaround. If I have an active SSH connection to the machine, I can close the lid without problems.
If I close the ssh connection while the lid is closed, it is also still fine. But if I close it without any SSH connection, it freezes.
Last edited by inferred (2012-12-11 15:49:16)

I have c600, and I used to have some kind of the same problem with it. I had acpi, and it had difficulties to suspend to RAM and to HDD... there were always problems doing this kind of things. But i reconpiled mu kernel (2.6.10 rc1) with apm support, and dissabled acpi. Now all of this (standby, suspend, etc) is working just fine. When I close the lid, tc PC get asleep.. somekind of suspend to RAM, ot god-knows-where. When I open it, it wakes up... And all of the function buttons are working too... maybe just apm is "native" for this kind of systems.
good luck

DELL Vostro 1015 Window 7 wont start

When I turn on my Dell Vostro 1015 laptop, here is what happens:
1. Dell icon and loading message (which is normal)
2. Black screen and "Windows is loading files" (never happened before)
3. Then the Microsoft Corporation loading bar stays on screen for some minutes
4. Screen with blue background, green leaf and a white bird appears. And then the Startup Repair runs saying: "checking your system for promblems"
5. After that, Startup Repair cannot repair this computer automatically
What should I do?
I really need help Masterss!

Hi,
Have you many any changes to your PC, system changes? software changes or hardware changes?
Can you successfully boot your PC into safe mode?
see this link:
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
You can also try other startup options, like last known good configuration. it can starts Windows with the last registry and driver configuration that worked successfully
Advanced startup options (including safe mode)
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7
What is the result?
Regards
Yolanda
TechNet Community Support

Dell Vostro 1500 Laptop - MS Update Issues w/ 7 Pro

I've got a weird one here. Dell Vostro 1500 which is practically new. Windows updates fail in various stages, and with no real pattern, no error messages, nothing. When I view the update history, it's random updates that fail including security updates, IE 11 update, .NET updates, etc. This is a fresh installation of Windows 7 Pro, and I've tried both 32bit and 64bit versions from completely different installation media (OEM and DELL). Same results every time. Windows installs flawlessly, then when I update it takes literally all day to search, about 5 minutes to download and the installation fails on various updates. I assumed it was my network connection at the house last week, so I brought it to the office where I have crazy fast fiber. Saaaame results. I've installed no other software, just the OS and updated. System passes all...
This topic first appeared in the Spiceworks Community

I have a script that reads email in Outlook for Web, generates the folder structure by parsing the subject line, then downloads the file into the folder it just created.C#foreach (Item myItem in findResults.Items) { if (myItem is EmailMessage) { Console.WriteLine((myItem as EmailMessage).Subject); string strSubject = (myItem as EmailMessage).Subject; string[] strDelimiters = { " - ", " - " }; string []strTemp; string []strFolders; string strFileUrl; strTemp = strSubject.Split(strDelimiters, StringSplitOptions.None); strDelimiters[0] = " "; strDelimiters[1] = " "; strFolders = strTemp[1].Split(strDelimiters, 2, StringSplitOptions.None); strFolders[1] = strFolders[1].Replace('', '_'); //strFolderPath = preDownload(strFolders[0], strFolders[1]); // get message body PropertySet psPropset = new PropertySet(); psPropset.RequestedBodyType = ...

Run both Macbook and Dell desktop audio?

I just got a macbook...and also have a Dell 8400 desktop with their subwoofer and audio system. Is there some kind of a/b box I can get to plug both the mac and the dell into that will connect to the audio system? ARe there compatibility issues?
TIA

hey there tmenyc, welome to Discussions
i use an old switch box i puchased @ Radio Shack about 15 years ago to switch between my DP G5 analog out & my HDTV monitor audio out to feed my desktop computer speakers. box uses RCA connections. i think you could use any of several styles of a-v switch box w/ RCA connectors, such as those sold @ Wal-Mart, Target, etc... you just need the proper connecting cables. i can't imagine there would be compatibility issues.... speakers & amps don't really care about OS's.
good luck.

ITouch Firmware Upgrade - Can no longer connect to car audio system

I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

IPhone 5S with ios8 fail to connect my Bluetooth car audio system

Dear apple users and developers,
I have read many threads about this issue mostly for iPhone 5 (ok i have the 5S) perhaps this makes a difference. With the ios7 i had no issue and always connected to my MHV-8300BT Pioneer device in my car. After update, when i get connected, i says "Calling My number" and when i push the button on my device to answer it drops the line, it keeps the connection but i do not hear, speak. Then i have to change the source voice system and i set the speaker or the iPhone.
On my fathers Bluetooth, a Motorola, it works, at the beginning i made a reset only for the Network settings,
Do not know what else to do
Thanks for reading my post
Nikos

Hi MJM 1,
If you are having issues pairing your iPhone 5s to your car audio system via Bluetooth, you may find the following articles helpful (the first article also includes instructions on removing paired devices):
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Regards,
- Brenden

Problematic Dell Vostro Audio System

Similar Messages

Maybe you are looking for