Probleme avec la carte d'aquisition video NIPCI-1407

Bonjour
Je vien de recuperer une carte d'aquisition video NIPCI 1407 que j'ai pu installer sans probleme avec les driver NI-IMAQ.
C'est a dire qu'aussi bien windows ou le logiciel NI measurement and automation reconnaisse la carte sans probleme.
Sur ma carte je prenche avec un BNC une camera ccd philips qui marche tres bien sur un ecran video.
Mon probleme est qu'au moment ou je veut tester de visionner une image avec par exemple le logiciel NI vision white balancing utility je recoie un message d'erreur du type:
Error 1074397153 occured at imaq start.vi , Impossible de detecter une source video reconaissable.
Bref je n'arrive pas a utiliser la carte video et je ne sais plus trop quoi faire.
Avez vous des idées et recomandations pour faire fonctionner cette carte.
en vous remerciant.

Bonjour lxia,
Avez-vous essayé de faire vos premiers tests d'acquisition sous Measurement and Automation eXplorer (MAX) au lieu d'utiliser NI Vision White Balancing Utility?
Avez-vous un fichier icd pour votre caméra? Ce dernier peut parfois être fourni par le constructeur de la caméra.
Je vous invite également à regarder le document suivant : Common Error Codes with NI-IMAQ
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Similar Messages

Probleme avec la carte PCI 6O14 et Nidaqmx base 1.4 sous Linux

Je n'arrive pas a faire tourner la carte PCI 6014 avec le driver Nidaqmx base 1.4 sous Linux (Suse 9.0). lsdaq reconnait la carte mais le programme d'exemple acquire1point renvoi une erreur de timeout. Le driver prend-il bien en charge cette carte ?

Bonjour,
Le driver NI-DAQmx Base supporte la PCI-6014 sur Linux.
Je vous joins un tutorial qui explique comment utiliser DAQmx Base sous linux... Vous pouvez configurer vos voies dynamiquement ou statiquement.
Assurez-vous bien que l'exemple que vous utilisez demande une voie physique ou une tâche.
http://zone.ni.com/devzone/conceptd.nsf/webmain/42B73A7B82F0FEC786256FB1007227EC#6
Essayez d'autres exemples. Si le problème persiste quelque soit l'exemple, si vous ne parvenez pas à utiliser l'utilitaire "mxbaseconfig", repostez un thread.
Bon courage,
David D.
Ingénieur d'Application
NI France

Acquisition video avec une carte NI PCI 6221

Bonjour,
je ne m'y connait tres peu en electronique et programmation.
sachant que je suis equipé d'une carte NI 6221, je voulai savoir si il etait possible d'utiliser une de ses entrées analogique pour recuperer le signale d'une camera video type webcam ou petite cdd et d'afficher l'image grace a labview.
Si oui, pouvez vous me guider vers l'information. Si non , pourquoi?
Merci

Bonjour,
Voici les differentes cartes d'acqusition video.
http://www.ni.com/vision/framegrabber/f/
Cordialement
Samuel G. | Application Engineer Team Leader
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Signal reseau toujours faible voir indisponible alors que avec meme carte SIM dans autre telephone , signal maxi. Que faire ?

ou que je me trouve, sur mon iphone 3GS j'ai toujours un probleme de force signal reseau alors que avec meme carte SIM dans autre telephone , signal maxi. Que faire ?
apparement depuis que ce telephone a ete dessimloque de chez orange depuis orange.fr et par itunes.

Bonjour
je viens d'acheter un iphone 5S et je rencontre les mêmes problèmes de faiblesse de signal pourtant signal max avec la même puce sur d'autre téléphone.
As tu trouvé une solution?

Probleme avec lexmark P4330

Je n'avais aucun probleme avec ma Lexmark P4330 series sur Tiger. Depuis ma mise a jour Leopard, ma LExmark est bien reconnue mais elle bloque a l'impression. J'ai téléchargé le pilote Lexmark mais toujours rien.
Avez vous une solution
merci

Pardon mon français, mais je recommend le video suivant:
http://ca.youtube.com/watch?v=D6cs7Z07k1g
Pedro

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Problem with Shopping cart's currency

Hello,
I've got a problem with shopping cart's currency. I create the shopping cart with 1 item currency "EUR", I see in my backend ECC 5.0 , my purchase requisition have got a currency in "CHF".
System SRM : SRM 5.5
System ECC : 5.0
The scenario for approval shopping cart is automatic, the workflow WS1000060 is active.
Can you help me please, thanks very much.
Lionel

Hi Sambit,
Yes I found the solution.
You must implemente this BADI BBP_CREATE_BE_RQ_NEW with method FILL_RQ_INTERFACE.
You can see my code :
METHOD if_ex_bbp_create_be_rq_new~fill_rq_interface.
DATA : wa_requisition_items TYPE bbps_badi_rq_item,
         wa_item TYPE bbp_pds_transfer_item,
         w_tabix TYPE sy-tabix,
         w_check.
LOOP AT cs_rq_document-it_requisition_items INTO wa_requisition_items.
    w_tabix = sy-tabix.
    READ TABLE is_sc_document-item INDEX w_tabix INTO wa_item.
    IF wa_requisition_items-currency NE wa_item-currency.
      wa_requisition_items-currency = wa_item-currency.
      wa_requisition_items-c_amt_bapi = wa_item-gross_price.
    ENDIF.
    MODIFY cs_rq_document-it_requisition_items FROM wa_requisition_items INDEX w_tabix.
    CLEAR : wa_requisition_items,
            wa_item.
ENDLOOP.
ENDMETHOD.
I hope that will help you.
Kind regards.
Lionel
Edited by: Lionel Lacotte on Jun 24, 2008 2:22 PM

Probleme avec localiser mon mac "en ligne, aucune position disponible"

Bonjour,
J'ai un soucis lorsque je vais sur icloud.com, Mon mac ne se localise pas.
Voici le message d'erreur "en ligne, aucune position disponible"
J'ai formater le systeme une fois, sans faire de restauration (installation clean)
Comment faire
A noter que je ne peux pas non plus regler l'heure comme je veux :
Dans "date et heure" je coche la case "regler le fuseau horaire automatiquement en fonction de mon lieu actuelle"
Il me repond: impossible de determiner le lieu actuel pour l'instant.
Merci !
Bonne journée !

Si vous la recommencez (la navigateur), qu'est-ce qu'il se passe? Ca me semble probleme avec Adobe Flash -- avez vous Flash advertisements ou programmes courant la?
On peut trouver un "plug-in" pour Safari qu'arreter ces morceaux de Flash. On peut aussi aller a www.adobe.com et voir s'il y a un nouveau plug-in pour vous.
(On doit pardonnez moi, le Francais n'est pas mon langue permier et il y avait beaucoup de temps depuis que j'avait la chance a la practiquer).

TS3367 I already try these steps but I still got the problem I can't make a video call at all or receive .

I already try these steps but I still got the problem I can't make a video call at all or receive .

Here som other steps you can try;
Make sure that you have an internet connection
Make sure that you have a valid Apple ID (check here: myinfo.apple.com). Note that your Apple ID to register FaceTime on iPad 2, iPod touch, or FaceTime for Mac must be an email address. You can create a new Apple ID or make changes by visiting myinfo.apple.com and using the “Manage your Account” part.
Tap Settings > FaceTime to see that your email address is verified. If your status is saying “verifying,”; then try toggling FaceTime off and on (Settings > FaceTime OR FaceTime for Mac: FaceTime > Preferences)
Try turning FaceTime off and on again using the following (iOS: Settings > Phone OR FaceTime for Mac: FaceTime > Preferences)
Make sure that FaceTime is enabled (Settings > FaceTime.)
Make sure that the camera for FaceTime is not restricted (Settings > General > Restrictions.)
Tap Settings > General > Date & Time to check date and time are set correctly.
Make sure that you are using the correct method for calling the person. iPhone user: Use the phone number; iPad 2, iPod touch, or FaceTime for Mac user: Use the email address

On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook. When I click the links, I get a message saying: "Flash Player upgrade required." and under it, it says, "You need to download and install the lastes vers

On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.

The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.

HAving problem with this HP Desktop no video

Ok here is the computer that was purchased HP Debranded TS-0006P-AMDX605. It was bought from newegg, and here is the product page. http://www.neweggbusiness.com/Product/Product.aspx?Item=N82E16883148037
Operating system is windows 7 home premium 64bit
Now when I first got this computer it would not turn on. I procedded to take memory out and put back in and then I got video.
Everything went smooth until I upgraded the memory. Purchase an extra one gigabyte and when I first plugged it in no video.
It was becuase of this post http://h30434.www3.hp.com/t5/Desktop-Hardware/Upgrading-Memory/m-p/1068519#M40677
that i figuredout why there was no video. Once i placed the memory chips in the right slots it started up with no problems.
Now this computer was for a friend who was elderly, did not have that much money, and did not understand computers too much. Whenthis computer is on it runs great and he loves it.
Now here is the problem, he would go to turn it on via the power button, and it would not send video to the monitor, he would then hold the power button for about 5 seconds to shut it down, the try again. It would take him about five tries to get it to come on.
I figured it might be the memory, so i went to his house and took out the memory. Seemed to work ok. Now he is having those problems again, where sometimes when he goes to turn it on, it just does not send any power to the monitor.
Now what I told him to do was, to turn the computer on in the morning and leave it on. Just let the monitor go to sleep. When he is done with the computer in the vening, just turn it off. Now this is working for him, but this should not be happening.
His symptoms are that SOMETIMES when he turns the computer on there is no video signal sent to the monitor.
Please does anyone have a solution, or tell me what to check. I have already put another brand new power supply in which did not fix the problem. Also removed the extra memory that was purchased seperately. Still same issues.
Oh and here is the motherboard that is in the HP Desktop http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01925486

How many GB of ram, and how many slots did the computer come with and were the ram chips the same brand? Say you have 2 ram chips, one has 1 gb and the other has 2gb. Most of the time you wont have a problem but putting equal amounts of ram in each slot is the best thing to do, otherwise your computer could start acting funny. Also never mix different brands of ram chips together. . What I would do is put one chip in the computer and see how it runs. If you still have a problem then swap it out with another. If you still have a problem after only putting one chip in than the ram is not the problem. Coould be a faulty video card and it could be going out on you. Could be a number of things really, but its a process of elimination. Try hooking it up to a different monitor. Let me know.

Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il

Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il me semble que j'ai un conflic de CODEC je suis incapable de solutionner SVP m'aider a corriger le probleme

Ok, je n'avais pas ouvert ton fichier.
Je pense que le problème vient plutot de la construction du cluster. Je suis même étonné que tu n'ais pas d'autres données propres au format Cluster.
As-tu essayé soit d'appeler 3 fois ta fonction d'écriture (1 fois avant pour la donnée 8888 d'initialisation, 1 fois pr le tableau, et 1 fois pr la donnée de fin) mais je pense que cette solution n'est pas très optimisée côté performance.
Ou sinon de modifier ton tableau en incluant tes données de début et fin directement dans le tableau avant de l'écrire dans le fichier?
Je regarde de mon côté également.
Cordialement,
Olivier L. | Certified LabVIEW Developer

Hi, i have problem, when i press " File Import Video Frames to layers " please i need solve it fast. waiting.....

hi, i have problem, when i press " File > Import >Video Frames to layers " he say to me [could not complete the video frames to layers command because photoshop does not support video on this version of windows] so please i need solve it fast...

We can't know. You have not provided any system info, no details about your video files nor do we actually know what version of what program you are referring to.
Mylenium

Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

I'm having the same problem. I have downloaded Itunes again but still the same problem.

Probleme avec la carte d'aquisition video NIPCI-1407

Similar Messages

Maybe you are looking for