Probleme avec "Load file WRL"

j'ai un probleme avec "load file WRL" , je veux ajouter un fichier .wrl importer via solidworks sur labview mais lors de l'execution j ai un probleme
"LabVIEW: This scene is missing expected nodes or contains nodes that LabVIEW does not support.
Method Name: Scene:Read Scene File"

oui bien sur, le voila :
Pièces jointes :
test Controle_caméra_prosilica_2.8_2121.vi ‏3752 KB
CalculateFPS.vi ‏12 KB

Similar Messages

MISALIGNMENT PROBLEMS USING "LOAD FILES INTO PHOTOSHOP LAYERS" FROM BRIDGE CC

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs. I was told the issue would be escalated... That was five days ago, and I've heard nothing.
Here is the problem: In ACR working on a bracketed group of five images shot from a solid tripod in Bridge CC. I carefully synchronize all parameters incl. crop, transform, exposure, etc. Then I go to Tools / Photoshop / Load files into Photoshop layers, and the images open in photoshop in a layered file..., BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not.
Photoshop CC & Bridge CC are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe two weeks ago. I have reset preferences, reset tools in Photoshop, even uninstalled and reinstalled Bridge CC 6.1.0.115 all to no avail. Any suggestions? I am desperate for some help.

I run Windows 7 Ultimate, I have 2.00GB of RAM with 1.74 usable, and I selected 40 images, each about 2MB.

Problem with loading file with SQL loader

i am getting a problem with loading a file with SQL loader. The loading is getting
terminated after around 2000 rows whereas there are around 2700000 rows in the file.
The file is like
919879086475,11/17/2004,11/20/2004
919879698625,11/17/2004,11/17/2004
919879698628,11/17/2004,11/17/2004
the control file, i am using is like:-
load data
infile 'c:\ran\temp\pps_fc.txt'
into table bm_05oct06
fields terminated by ","
(mobile_no, fcal, frdate )
I hope, my question is clear. Please help, in solving the doubt.
regards.

So which thread is telling the truth?
Doubt with SQL loader file wih spaces
Are the fields delimited with spaces or with commas?
Perhaps they are a mixture of delimiters and that is where the error is coming in?

Problem with loading file to BLOB column

I am attempting to load up a .gif gile into a BLOB column in my database.
I created the directory as below:
===
SQL> create or replace directory example_lob_dir as 'C:\temp';
Directory created.
===
Next I created the following procedure to load the file into the BLOB column:
====
create or replace procedure load_blob as
dest_loc blob; -- destination location
src_loc bfile := bfilename('example_lob_dir', 'example.gif'); -- source location
begin
-- Insert intial BLOB value
insert into test_blob(id, file_name, image)
values (1, 'test.gif', empty_blob())
returning image into dest_loc;
-- Open the source BFILE
dbms_lob.open(src_loc, dbms_lob.lob_readonly);
-- Open the LOB (optional)
dbms_lob.open(dest_loc, dbms_lob.lob_readwrite);
-- Load the file
dbms_lob.loadfromfile(
dest_lob => dest_loc,
src_lob => src_loc,
amount => dbms_lob.getlength(src_loc));
-- Close LOBs
dbms_lob.close(dest_loc);
dbms_lob.close(src_loc);
commit;
end load_blob;
===
The file is definitely in the C:\temp folder and is named correctly. I am working in WinXP with Oracle10gXE and both server and client are on the same machine.
The procedure compiles without any errors but when I attempt to run it I get an error message as below:
==
SQL> exec load_blob
BEGIN load_blob; END;
ERROR at line 1:
ORA-22285: non-existent directory or file for FILEOPEN operation
ORA-06512: at "SYS.DBMS_LOB", line 716
ORA-06512: at "FTM.LOAD_BLOB", line 14
ORA-06512: at line 1
==
Any help would be much appreciated.

When you create objects on the database they are stored in the data dictionary by default in UPPER case.
So in this line:
src_loc bfile := bfilename('example_lob_dir', 'example.gif'); -- source location
you need to reference the name of the directory object in upper case. e.g.
src_loc bfile := bfilename('EXAMPLE_LOB_DIR', 'example.gif'); -- source location
;)

Problem in Load File into BI-Integrated Planning

<b>Hi Marc,
When I am running the URL for file upload in BI Integrated Planning, I am getting the below message ( we have created the variable on navigational attribute):</b>
Note
The following error text was processed in the system BWD : /BI0/OICOSTCENTER__0SALES_DIST is not a valid attribute type.
The error occurred on the application server ma1ua231_BWD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE_INFO~ADD_ATTRIBUTE of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: WDDOMODIFYVIEW of program /1BCWDY/780RZKQ35587UCX2RCTU==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/780RZKQ35587UCX2RCTU==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
<b>In System we are getting Short dump as:</b>
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and therefore caused a runtime error.
The reason for the exception is:
/BI0/OICOSTCENTER__0SALES_DIST is not a valid attribute type.
I went through your blog. Just curious to know when can we expect Version 2 of the how-to solution will support a direct upload from Excel without the need to launch a browser.
Thanks
Kamlesh Mishra

Hi Marc,
Thanks for your support and great help for the problems we are facing in IP. Now we are able to get the browser screen for selecting the file, but we are facing new issue, When we are uploading file, the system is giving dump saying "THE ASSERT CONDITION was violated" in the below source code:
LOOP AT n_t_charsel INTO l_s_charsel WHERE sign = 'I' AND opt = 'EQ'.
ASSIGN COMPONENT l_s_charsel-iobjnm OF STRUCTURE <l_s_data> TO <f>.
ASSERT sy-subrc = 0.
IF <f> IS INITIAL.
    <f> = l_s_charsel-low.
ENDIF.
ENDLOOP.
(We are unable to open the Blog, it is showing us "No Authorization" message)
Thanks,
Kams

Problem With Loading Files On Android

Hi,
I am using the below code to load video which is packaged within my app. It works fine on IOS and the desktop, but not on Android. It appears that the nativePath property is null for some reason on Android. Does anyone know the reason for this?
thx
var videoFile:File;
var videoPath:String;
var description:String = contentXml.text;
var videoUrl:String = contentXml.media.source.(@type == "large_image");
var videoPathStr:String = "data/cmms/images/" + cmmsAssetId + ".mp4";
videoFile = File.applicationDirectory.resolvePath(videoPathStr);
videoPath = new File(new File(videoFile.url).nativePath).url;

Looks like nativePath is always null on Android... didn't see mention of that in documentation. Anyway fixed it with new File(videoFile.url).url

Problem with applet file loading

I have a problem with loading files into a java applet. import java.applet.*;
import java.awt.*;
import java.io.*;
import java.util.*;
import java.net.*;
public class main extends Applet {
     private static ArrayList<String> SGM;
     public void init() {
          SGM = new ArrayList<String>();
          String gameDir = getParameter("game_dir");
          try {
               File fHandle = new File(gameDir+"game.sgm");
               Scanner fScanner = new Scanner(fHandle);
               while(fScanner.hasNextLine()) {
                    SGM.add(fScanner.nextLine());
               //System.out.println(SGM.get(0));
          } catch(Exception e) {
               System.out.println("Applet threw error: "+e);
...The problem is with File fHandle = new File(gameDir+"game.sgm"); I tried putting File(gameDir+"/game.sgm"); and appending / to the folder in the <PARAM> tag, but it still changes it to \, which means I can only run it locally, and in Windows. Why is it doing this, and how can I fix it?

This file you were hoping to load: it's on the server, right? Not on the computer where the applet is running in a browser?
(At least that's a common mistake made by people when they write their first applet.)
If that's the case then you can't use a File object to access a file on a different computer. To access a file on the server, first you will have to put the file in a place on the server where it can be downloaded. Then in your applet you need to get a URL for the file. (The getDocumentBase() method can be used to prevent you from having to hard-code the full URL for the file.) Next, "this.getClass().getResourceAsStream(URL)" gets you an InputStream from which you can read the data from the file.

Help in load file...

Guy, i have a problem in loading file. It got stuck in the reading function code. I cannot post the code here because it take about 3 pages and it need the *.txt file. If anyone willing to help me, i will send the code to your email.
Thank you very much.

Hi,
This is my email id :
[email protected]

How to load multiple .wrl (VRML) files?

Hi all,
I need to load four components of a coffee table into the virtual universe, the four components are top, base, left leg and right leg. I use four parts not one whole single object because in this way when I change the size of this furniture, I can make the thickness of the edges fixed, which is a must. The four parts consist a table correctly in the design software TopSolid, but when I load the four .wrl ojbect files seperately in the application, they cannot compose a table correctly. I guess the reason is the four components have been resized and translated automatically in the VRML loader. I have reviewed the source code of the VRML loader and some related source code but not be able to find where the auto resize code is.
I have used four Wavefront .obj files instead to do another technical demonstration, if I disable the ObjectFile.RESIZE flag, and just scale the four parts by myself using the same scale factor, I can get a perfect coffee table, with every part in correct location. But my supervisor insist on using VRML .wrl files in our project.
I hope someone can give me some kind instructions or advises on how to do it in VRML97 loader (https://j3d-vrml97.dev.java.net/).
Any help will be highly appreciated.

Answered here : http://www.java.net/forum/topic/javadesktop/java-desktop-technologies/java-3d/trying-load-multiple-wrl-vrml-files-same

"Load Files into Photoshop Layers" persistent misalignment problem

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs.
I'm working in Bridge CC in ACR, synchronizing all parameters incl. crop, transform, exposure, etc. of a bracketed group of images shot from a solid tripod. When using the Tools / Photoshop / Load files into Photoshop layers command, the images open in photoshop in a layered file, BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not. Photoshop and Bridge are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe less than two weeks ago. I have reset preferences, even uninstalled and reinstalled Bridge CC 6.1.0.115 to no avail. Any suggestions?

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Load files into Stack Problems

So what happen was this. I make GIFs as a hobby. But what happen was that 3 days ago, I opened my Photoshop CS5.1 Extended version 12.1 (x64) and did the usual thing.
I went to Scripts and to Load Files into Stacks. I loaded my files and pressed OK. So here's the funny part, usually, the pictures will load by itself and eveyrthing will be in order. But what happen was that the layers load to around 6 to 7 layers and everything just disappear. Literally disappear. Like I didn't even load anything. No canvas, no images, nothing. I thought it was a bug or something so I reinstalled my CS5 but the problem remains.
So I try with my CS6 Extended version 13.0 x64. (That I barely use because I'm still more comfortable with CS5.) And the same thing happens.
I decided to Google it and nothing comes up. I do not know whether is it my laptop or something went wrong somewhere. This has never happen before for the amount of time I have CS5.
I even change my scratch disc space. Last time it was on (C) with around 20GB space and nothing happens. So I changed it to my D drive and it has atleast 150GB space. I even tried closing every applications I have to test whether is it something related to my ram. But nothing happens. The problem remains.
So I require some help because I asked around and it appears that none of my friends knows whats wrong.
Here's my system information:
Window 7 Ultimate Service Pack 1
Intel (R) Pentium (R) CPU B970 @ 2.30GHZ
6.00 GB Ram
Running on 64-bit OS
Graphics:
Intel(R) HD Graphics Family

When you start having problems with Photoshop. Most of the time its because of something external to Photoshop or your user id Photoshop preferences. Reinstalling Photoshop seldom fixes these problem. For User preferences survive across the reinstall. Third party plug-in may as well. Since you have the problem with both CS5 and CS6 it may have to do with the files your loading into the stack. For that something both version are trying to process. CS5 and CS6 haves separate Preferences and third party add on must be installed into each though they may share plug-in if you use Photoshop Preferences to and a additional plug-in path and you use the same path for CS5 and CS6.

Problem in loading few jsp files

Hi,
I am facing problem in loading very few jsp pages. The situation is something like this.
Server: WebSphere
I have a top frame and bottom frame.
When the user keep on clicking the same link in the top frame, not giving time to get loaded in bottom frame,
on the server the error "Servlet Error: Connection reset by peer: socket write error: java.net.SocketException: Connection reset by peer: socket write error" was coming.
My bother is not on the server-side. but on the client side.
On the client side, the html of two requests are getting overlapped and displaying(see at the end for sample output of html). In this HTML, if you observe, you can find the line "Error 500: Connection reset by peer: socket write error
". Above to this is the half-content of the previous request and bellow is the actual page need to be loaded. And the output was a merge of actual page with the code of the previous request.
Is it the problem of Websphere or coding?
Can you help me resolving this problem?
thanks
naveen
Output HTML (for example):
     Contract Name:</td>
     <td class="Label" ><input type="text" id="contractName"
size="25" maxlength = "100"></td>
     <td class="Label" >Owner:</td>
     <td class="Label" colspan="2"><select id="owner" class="Label"
size="1" style="WIDTH:200px">
     <option value="_______________">_____________</option>
     </select></td>
               </td>
Error 500: Connection reset by peer: socket write error
<html>
<head>
<title> welcome </title>
<link rel="STYLESHEET" type="text/css" href="Scripts/SSheet.css">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">

.... and so on
</html>

Hi
I have Observed that "java.net.SocketException: Connection reset by peer" is caused due to manual malfunction performed by the user in the browser like sending multiple request to the server stopping, moving forward, moving backward when a request is placed to the server and waiting for it to get it done.
More clearly if the User Selected an option from the browser and send a request to the server and followed by sending another request immediately to the server and by this time Server is processed the first request and is started writing the result to the JSP/Browser (Same client), by this time the 2nd reqest from the same Browser/Client is interrupted the first one and ohhhhhhh..... problem , you got an error "java.net.SocketException: Connection reset by peer".
If any one could figure out more Please update me too appreciate !
[email protected]
Sr. Software Architect

URGENT: Problems Loading files with SQL Loader into a BLOB column

Hi friends,
I read a lot about how to load files into blob columns, but I found errors that I can't solve.
I've read several notes in these forums, ine of them:
sql loader: loading external file into blob
and tried the solutions but without good results.
Here are some of my tests:
With this .ctl:
LOAD DATA
INFILE *
INTO TABLE mytable
REPLACE
FIELDS TERMINATED BY ','
number1 INTEGER EXTERNAL,
cad1 CHAR(250),
image1 LOBFILE(cad1) TERMINATED BY EOF
BEGINDATA
1153,/opt/oracle/appl/myapp/1.0.0/img/1153.JPG,
the error when I execute sqlldr is:
SQL*Loader-350: Syntax error at line 9.
Expecting "," or ")", found "LOBFILE".
image1 LOBFILE(cad1) TERMINATED BY EOF
^
What problem exists with LOBFILE ??
(mytable of course has number1 as a NUMBER, cad1 as VARCHAR2(250) and image1 as BLOB
I tried too with :
LOAD DATA
INFILE sample.dat
INTO TABLE mytable
FIELDS TERMINATED BY ','
(cad1 CHAR(3),
cad2 FILLER CHAR(30),
image1 BFILE(CONSTANT "/opt/oracle/appl/myapp/1.0.0/img/", cad2))
sample.dat is:
1153,1153.JPEG,
and error is:
SQL*Loader-350: Syntax error at line 6.
Expecting "," or ")", found "FILLER".
cad2 FILLER CHAR(30),
^
I tried too with a procedure, but without results...
Any idea about this error messages?
Thanks a lot.
Jose L.

> So you think that if one person put an "urgent" in the subject is screwing the problems of
other people?
Absolutely. As you are telling them "My posting is more important than yours and deserve faster attention and resolution than yours!".
So what could a typical response be? Someone telling you that his posting is more important by using the phrase "VERY URGENT!". And the next poster may decide that, no, his problem is evern more import - and use "EXTREMELY URGENT!!" as the subject. And the next one then raises the stakes by claiming his problem is "CODE RED! CRITICAL. DEFCON 4. URGENT!!!!".
Stupid, isn't it? As stupid as your instance that there is nothing wrong with your pitiful clamoring for attention to your problem by saying it is urgent.
What does the RFC's say about a meaningful title/subject in a public forum? I trust that you know what a RFC is? After all, you claim to have used public forums on the Internet for some years now..
The RFC on "public forums" is called The Usenet Article Format. This is what it has to say about the SUBJECT of a public posting:
=
The "Subject" line (formerly "Title") tells what the message is about. It should be suggestive enough of the contents of the message to enable a reader to make a decision whether to read the message based on the subject alone. If the message is submitted in response to another message (e.g., is a follow-up) the default subject should begin with the four characters "Re: ", and the "References" line is required. For follow-ups, the use of the "Summary" line is encouraged.
=
([url http://www.cs.tut.fi/~jkorpela/rfc/1036.html]RFC 1036, the Usenet article format)
Or how about [url http://www.cs.tut.fi/~jkorpela/usenet/dont.html]The seven don'ts of Usenet?
Point 7 of the Don'ts:
Don't try to catch attention by typing something foolish like "PLEASE HELP ME!!!! URGENT!!! I NEED YOUR HELP!!!" into the Subject line. Instead, type something informative (using normal mixed case!) that describes the subject matter.
Please tell me that you are not too thick to understand the basic principles of netiquette, or to argue with the RFCs that governs the very fabric of the Internet.
As for when I have an "urgent" problem? In my "real" work? I take it up with Oracle Support on Metalink by filing an iTAR/SR. As any non-idiot should do with a real-life Oracle crisis problem.
I do not barge into a public forum like you do, jump up and down, and demand quick attention by claiming that my problem is more important and more urgent and more deserving of attention that other people's problem in the very same forum.

Problem with loading Danish dictionaries files.

Hi,
I want use Danish spell check for my project and when my app start load
spell check files I get exception. Files are here http://www.stavekontrolden.dk/main/top/index.php.
Please tell me is thare any way to use Danish spell check in flex application?
And alos I can't find Finnish spell check that I could use with flex.
Is flex support Finnish spell check ?? If no will flex support it?
Error decription:
Main Thread (Suspended: Error: null cannot be parsed to a squiggly dictionary)
Thanks,
Vladimir

As Ned said the problem might be with the file structure on the server. Other problems may be with spelling. You computer may not be case sensitive to the names of the .swf files that you are loading, but your server might. So, on your computer when you are testing, second.swf is the same as Second.swf, or even second.SWF. But, on the server each of these variations is seen as a different file. Another problem is that when you are loading files from the same computer in testing, those files are close and so they load very quickly from your computer. When the files have to travel from the server, there will likely be a measurable period of time before the file is ready to be shown. This is particularly problematic with video that is embedded into an .swf. The whole file will need to be downloaded and uncompressed before it is available to play. If you stream the video as an external file, you can shorten the wait considerably.

Problem generating manifest. Could not load file or assembly or one of its

Dear all,
i am using visual studio 2008 on windows7 (32 bit). my project was running very fine but today i received the following error when i build my project
"Problem generating manifest. Could not load file or assembly or one of its dependencies. An attempt was made to load a program with an incorrect format"
i have deleted all the refrences and then added all one by one , all refrences added successfully, but when i added "CrystalDecisions.ReportSource" and build the application i found the above error. '
i will be very thankfull if anyone could help me
Regards.

What version of Crystal Reports?
- Ludek

Probleme avec "Load file WRL"

Similar Messages

Maybe you are looking for