Probleme avec outil selection fleche noire

bonjour a tous
je suis novice sur illustrator
je n'arrive plus à redimensionner mes objets avec l'outil selection fleche noire ,cela ne fait que deplacer les objets.
quelle mauvaise manipulation ai je faite ?

merci . mais cela ne marche toujours pas avec la fleche noire .je me sers donc de l'outil mise a l'echelle .y a t'il un moyen pour reinitialiser les fonctions ?merci
je ne comprend pas ce que j'ai pu faire .au debut cela marchait bien ????
Message du 01/01/11 17:35
De : "Benoit Pennecot"
A : "jean pierre charles"
Copie à :
Objet : probleme avec outil selection fleche noire
Pour Redimensionner des objets, vous pouvez soit utiliser l'outil MISE À L'ÉCHELLE (Raccourci clavier S), soit utiliser l'outil de sélection (la flèche noire).
Pour utiliser L'OUTIL DE SÉLECTION, survolez une poignée de redimensionnement (un des 8 petits carrés blancs qui apparaissent autour de votre objet sélectionné) jusqu'à ce que votre pointeur se transforme en double flèche. Cliquez et glissez.
>

Similar Messages

Problem in multiple selections in a jList

I have two jLists. Now I have to select some items from one jlist and have to transfer in the other one. But while trying to do it in the runtime I am getting some unexpected runtime errors including "Exception occurred during event dispatching". When I try to transfer only one item it works fine but shows problem in multiple selections. Pleast give your suggestions.

[_First suggestion_|http://catb.org/~esr/faqs/smart-questions.html]
[_Second suggestion_|http://mindprod.com/jgloss/sscce.html]
db

Problem in AT selection screen validation

Hi,
I am having problem in AT SELECTION SCREEN Validation.
I have 2 radiobutton and 6 parameter. if i click first radio button all the 6 radiobutton should enable and take the user input, that is working fine for me.
if i click second radiobutton , out of 6 , 3 parameter should disable and remaining 3 should enable. thats also working fine.
My problem is program has written the validation for this 3 parameter in the AT SELECTION SCREEN.
For first radioutton all the validation working fine, for second validation as soon as i press the radiobutton it will display error message. Based on 2 parameter user is filling value for 3 rd parameter.
I want the same validation to be done for second radio button after user pressing enter.
PARAMETER: p_single RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND f1,
           p_multi RADIOBUTTON GROUP rad1.
PARAMETERS: s_pwwrk LIKE plaf-pwwrk.
PARAMETERS: p_lgort LIKE plaf-lgort.
PARAMETERS: p_kostl LIKE cobl-kostl.
here is my code:
AT SELECTION SCREEN.
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
    MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
    SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
    SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
    IF p_budat0(4) NE marv-lfgja OR p_budat4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
        IF p_budat0(4) NE marv-vmgja OR p_budat4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                            'is closed.
                                        Please try again.'.
        ENDIF.
      ELSE.
        MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                          'is closed.
                                      Please try again.'.
      ENDIF.
    ENDIF.
ENDIF.

For your Case ,
If i understand clearly,You can do the validation when you want on AT SELECTION SCREEN ON WP_FIELD.
If you say your validation to be done only for Selection of Second Radio Button, then..
AT SELECTION SCREEN.
if p_multi eq 'X'. "<- Make Validation to be done only if user select Second Button
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat+0(4) NE marv-lfgja OR p_budat+4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat+0(4) NE marv-vmgja OR p_budat+4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.
endif.

Problem in my Select query

Hi Experts,
I need a clarification in my Select query.
Have created a custom search help and my requirement is I have Request ID, Last and First Name as my search parameters. I need to fetch the values from my Ztable on search with the above said search parameters, where its workflow status = 30.
   * Get Request ID
lv_pattern = <ls_query_params>-request_id.
IF lv_pattern CA '*'.
    REPLACE ALL OCCURRENCES OF '*' IN lv_pattern WITH '%'.
ENDIF. " IF lv_pattern CA '*'
IF lv_pattern IS INITIAL.
    lv_pattern = '%'.
ENDIF. " IF lv_pattern IS INITIAL
** Get NACHN - Lastname
    lv_last_name = <ls_query_params>-nachn.
    IF lv_last_name CA '*'.
      REPLACE ALL OCCURRENCES OF '*' IN lv_last_name WITH '%'.
    ENDIF. " IF lv_pattern CA '*'
    IF lv_last_name IS INITIAL.
      lv_last_name = '%'.
    ENDIF. " IF lv_pattern IS INITIAL
** Get VORNA - First Name
    lv_first_name = <ls_query_params>-vorna.
    IF lv_first_name CA '*'.
      REPLACE ALL OCCURRENCES OF '*' IN lv_first_name WITH '%'.
    ENDIF. " IF lv_pattern CA '*'
    IF lv_first_name IS INITIAL.
      lv_first_name = '%'.
    ENDIF. " IF lv_pattern IS INITIAL
*Selecting the RequestID/Last and First Name values with workflow status as 30.
SELECT zzreq_id " Internal number for appropriation request
            nachn
           vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( ( zzreq_id LIKE lv_pattern ) and
                 ( nachn like lv_last_name ) or
                  ( vorna LIKE lv_first_name ) )
       AND zzstatus = lv_workflow_status.
My problem is, ofcourse this query is selecting all the records where status = 30 and even it works correctly, If I searches with Request ID(* or *3*).
But am not able to select the records, if I searches with Last or First Name. Guess I did some thing wrong in select query.
Please advice me.
With Regards,
Ram.

Re: Problem in my Select query
Krishna kumar Jun 9, 2014 7:52 AM (in response to Ramakrishnan Murugan)
Hi Ramakrishnan,
                     Can you just try the below Select Query,
SELECT zzreq_id
            nachn
           vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( zzreq_id     LIKE    lv_pattern               and
                     nachn         LIKE    lv_last_name         and
                   vorna          LIKE     lv_first_name )    and
                      zzstatus = lv_workflow_status.
Cheers,
Krishnakumar B.
I think the above suggested query is same as your solution.

Problem in standard select query in fagll03

Good Morning frndz,
I m facing a problem while runnin fagll03. when executed it gives timeout error.
When I debug it , it gets stuck in a select query
SELECT SINGLE * FROM t800m INTO CORRESPONDING FIELDS OF ls_b
WHERE totable = ls_t800a-ntable
AND fromtable = 'ACCIT_GLX'
AND tofield = id_glflex_fieldname
AND seqnr = space.
The content in variable ls_t800a-ntable was FAGLFLEXA and in id_glflex_fieldname was USNAM.
When I cheked in table t800m, the entry could not be found. But in the report instead of setting
sy-subrc = 0 , it is stuck in the select query itself....kindly suggest y it is happening so
Regards,
Vincy

Re: Problem in my Select query
Krishna kumar Jun 9, 2014 7:52 AM (in response to Ramakrishnan Murugan)
Hi Ramakrishnan,
                     Can you just try the below Select Query,
SELECT zzreq_id
            nachn
           vorna
INTO TABLE lt_select_list
FROM ZTABLE
WHERE ( zzreq_id     LIKE    lv_pattern               and
                     nachn         LIKE    lv_last_name         and
                   vorna          LIKE     lv_first_name )    and
                      zzstatus = lv_workflow_status.
Cheers,
Krishnakumar B.
I think the above suggested query is same as your solution.

Problem in displaying selected page items in the title in Graph

Hi There;
I have a problem in displaying selected value of named page item in the graphs.
Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet title and value of selected page item "Location" in my example.
But when I use the same (&WorksheetName &Location) in the title of graph or Axis of the graph, it would show up only the name of the worksheet but not the value of page item "Location", instead it would print "&Location"
Any idea why it is not able to reference the select page item in Discoverer graph? I am using Oracle BI Discoverer 10.1.2.1.
Thanks in Advance,
Regards,
Nidhi Jethoo

Hi Michael;
Thanks a lot. It might not have been considered necessary but you do require, e.g in my case I am plotting Average value of a Parameter and it does make sense in including the name/value of Parameter(surface water temp/bottom watter temp) as an Axis instead of just a constant Parameter or say Average Parameter. So that user can plot the variation of different parameters by changing the page items and when user changes the value of parameter and export the graph he/she has the parameter name(actual value) in the graph.
But I can include all the parameters (&Parameters) or all the page items(using &PageItems) in graph then why not individual page-item and individual parameter.
I would log a SR and see what they say.
Thanks again,
Nidhi

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

Probleme avec localiser mon mac "en ligne, aucune position disponible"

Bonjour,
J'ai un soucis lorsque je vais sur icloud.com, Mon mac ne se localise pas.
Voici le message d'erreur "en ligne, aucune position disponible"
J'ai formater le systeme une fois, sans faire de restauration (installation clean)
Comment faire
A noter que je ne peux pas non plus regler l'heure comme je veux :
Dans "date et heure" je coche la case "regler le fuseau horaire automatiquement en fonction de mon lieu actuelle"
Il me repond: impossible de determiner le lieu actuel pour l'instant.
Merci !
Bonne journée !

Si vous la recommencez (la navigateur), qu'est-ce qu'il se passe? Ca me semble probleme avec Adobe Flash -- avez vous Flash advertisements ou programmes courant la?
On peut trouver un "plug-in" pour Safari qu'arreter ces morceaux de Flash. On peut aussi aller a www.adobe.com et voir s'il y a un nouveau plug-in pour vous.
(On doit pardonnez moi, le Francais n'est pas mon langue permier et il y avait beaucoup de temps depuis que j'avait la chance a la practiquer).

Problem with the selection screen in submit program

Hi Friends,
i am facing the problem wih the selection screen in submit program. in my Module pool program i am using the submit program statement, When i execute the program , The module program display the submit program selections creen.
I have implemented the code same as below.
submit ztest with tknum =p_tknum and return.
Can you pleaes help me how to avoid the submit program selection screen.
Thanks,
Charan

Hi Charan,
You have to give the selection screen values when you submit a job.
Press F1 on submit and you will see more details.
Here is an example from ABAP Documentation.
Program accessed
REPORT report1.
DATA text(10) TYPE c.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
     DATA: text(10)   TYPE c,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Jovito.

Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il

Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il me semble que j'ai un conflic de CODEC je suis incapable de solutionner SVP m'aider a corriger le probleme

Ok, je n'avais pas ouvert ton fichier.
Je pense que le problème vient plutot de la construction du cluster. Je suis même étonné que tu n'ais pas d'autres données propres au format Cluster.
As-tu essayé soit d'appeler 3 fois ta fonction d'écriture (1 fois avant pour la donnée 8888 d'initialisation, 1 fois pr le tableau, et 1 fois pr la donnée de fin) mais je pense que cette solution n'est pas très optimisée côté performance.
Ou sinon de modifier ton tableau en incluant tes données de début et fin directement dans le tableau avant de l'écrire dans le fichier?
Je regarde de mon côté également.
Cordialement,
Olivier L. | Certified LabVIEW Developer

Big problem with a select using remote database

Hi Guy.
I have a big problem with a simple query, but this is a scenario.
Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 installed on Red Hat As 4.5 placed in Milano Italy . Ttwo networks are connected via two adsl cisco router with firewall and Vpn functions. In Egypt there isn't a very good adsl.
In Alexandria, I'm trying to connect to database in Italy with sqlplus. The sqlplus connected I write.. select * from addetti and all work fine.
My problem is that when I try to make the same select on a table with many columns oracle database kill me a session.
My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.
So I began to change my query I start to
select field1 from ic_lav... and work
select field1,field2,field3,..........field50 from ic_lav and work
select field1,field2,field3,..........field70 from ic_lav and doesn't work
the select work with 68 columns
problem: the query with more then 1064 byte for row doesn't work.
I've tryed with anoter big table with the same problem, but the select fwork with 65 columns...
Iit is obvious that there is any problem with the limit of the query.
The same query (select * from ic_lav) in localMilano)l work fine.
The same query (select * from ic_lav) in vpn with a better adsl line and openvpn software (NO CISCO firewall) WORK FINE.
The same query connectetd in Milano with a vpn make with analogic modem and remote access by windows work fine.
the query (make on my laptop connectet with vpn by cisco doesn't work.
In cisco firewall we haven't any error (cisco man tell me so)
on database 9 I found :
*** 2009-06-12 09:49:45.509
*** SESSION ID:(66.44406) 2009-06-12 09:49:45.497
FATAL ERROR IN TWO-TASK SERVER: error = 12152
*** 2009-06-12 09:49:45.509
ksedmp: internal or fatal error
Current SQL statement for this session:
select * from ic_lis where ditta
----- Call Stack Trace -----
but I don't understand why the lost connection problem (bug 3816595 A processstate dump is produced for a lost connection (12152) ) is caused by len of row
Anybody have some idea ?
Thank you

My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.Do you get any error?
If the query length is a problem, you could create a view and query the view instead to see if this problem is resolved.

Probleme avec la carte d'aquisition video NIPCI-1407

Bonjour
Je vien de recuperer une carte d'aquisition video NIPCI 1407 que j'ai pu installer sans probleme avec les driver NI-IMAQ.
C'est a dire qu'aussi bien windows ou le logiciel NI measurement and automation reconnaisse la carte sans probleme.
Sur ma carte je prenche avec un BNC une camera ccd philips qui marche tres bien sur un ecran video.
Mon probleme est qu'au moment ou je veut tester de visionner une image avec par exemple le logiciel NI vision white balancing utility je recoie un message d'erreur du type:
Error 1074397153 occured at imaq start.vi , Impossible de detecter une source video reconaissable.
Bref je n'arrive pas a utiliser la carte video et je ne sais plus trop quoi faire.
Avez vous des idées et recomandations pour faire fonctionner cette carte.
en vous remerciant.

Bonjour lxia,
Avez-vous essayé de faire vos premiers tests d'acquisition sous Measurement and Automation eXplorer (MAX) au lieu d'utiliser NI Vision White Balancing Utility?
Avez-vous un fichier icd pour votre caméra? Ce dernier peut parfois être fourni par le constructeur de la caméra.
Je vous invite également à regarder le document suivant : Common Error Codes with NI-IMAQ
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Bonjour j'ai un probleme avec mon ipod touch des que je clique sur une application celle ci se referme immédiatement et je n'est donc plus accès a safariet au autre de mes application

bonjour j'ai un probleme avec mon ipod touch des que je clique sur une application celle ci se referme immédiatement et je n'est donc plus accès a safarie et au autre de mes application

Google translate:
hello I have a problem with my ipod touch as soon as I click on the application it closes immediately and I is no longer access to safarie and my other enforcement
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Probleme avec shared technologie

bonjour
mon ordi à bloqué ,donc obligation de réinstaller windows,ainsi que pse11 ,et probleme avec (shared thecnologie) d'aprés ce que j'ai vue,il y a un gros bins chez adobe ,j'ai décoché les entrées au démarrage,désactivé mon anti-virus,,,mais rien n'y fait...y a t'il comme (magix...logiciel de montage) un anti dote,car ce probléme n'est pas d'aujourd'hui!!!! toujours est'il que je suis trés déçus ,,,il est certain que si j'avais eu vent de ce probleme,je n'aurai pas investis dans ce logiciel ,qui me reste sur les bras,(trés chére le DVD),un membre aurait'il trouvez l'astuce,,merci à l'avance

just let it rollback the installation. Restart the machine and try again. http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

Probleme avec "Load file WRL"

j'ai un probleme avec "load file WRL" , je veux ajouter un fichier .wrl importer via solidworks sur labview mais lors de l'execution j ai un probleme
"LabVIEW: This scene is missing expected nodes or contains nodes that LabVIEW does not support.
Method Name: Scene:Read Scene File"

oui bien sur, le voila :
Pièces jointes :
test Controle_caméra_prosilica_2.8_2121.vi ‏3752 KB
CalculateFPS.vi ‏12 KB

Probleme avec outil selection fleche noire

Similar Messages

Maybe you are looking for