Probleme beim Factory Reset, Miix 2 - 8

Hi,
ich habe das Lenovo Miix 2 - 8, 32 GB, seit Juni im Einsatz und auch bereits einmal erfolgreich den Factory Reset durchgeführt. Jetzt wollte ich es wieder machen und nach dem anwählen im Bootmenü soll ich einen Windows Datenträger einlegen, da Dateien fehlen?
Habe auch Versucht über Windows den Reset zu machen, gleiches Ergebnis, benötigt Daten-CD.
Ich habe die Partitionen definitiv nicht verändert oder angelangt, sind alle 5 noch da.
Einziger Unterschied ist, dass ich auf Windows 8.1 upgedated bin. 
Gibts da noch was zu beachten bzw. wo kann das Problem sein?
Ich habe mir noch einen USB Stick bestellt (mikro) zum direkten anschließen. 
Ich wollte mal versuchen die 5. große Partition sichtbar zu machen, um dann über Windows einen Wiederherstellungsdatenträger zu erstellen. Dann booten und hoffentlich wird der Stick angezeigt.
Trotzdem blöd, kann ja eigentlich nicht sein. Kann ich sonst noch was tun? testen?
Wäre das ein Garantiefall?
Gruß
Hans

Hi,
I have the same issue... I can't play any game without come back to start unexpectedly.
Did you ever fix it?
Thanks

Similar Messages

  • Problem with factory resetting Airport Express

    I am trying to do a hard factory reset my airport express. I want to reset it to the factory default so that I can change the settings so that it connects to my comcast wirless modem. I followed the instructions on the apple support site. I held the reset button will the device was unplugged and then plugged it in while still holding the reset button. I held it until the green light flashed four times. But the stupid thing will not reset at all. Just the same blinking orange light. No green light. And of course, non identifiable on airport admin utility. This is really frustrating. Anyone know how to solve this problem.
    Thanks

    I have the exact problem described by AKAPLG. I've tried EVERYTHING with no good result.
    - My network does NOT show up in AirPort Utility (and even the old Airport Admin Utility)
    - Even after hard reset I can still see the old name of my network but am still unable to join it.
    - I've tried connecting directly with Ethernet to my MacBook Pro, but it is unclear what I'm supposed to do next, the manual doesn't mention this at all. When it's connected I do not see my AX in the AirPort Utility menu when I rescan.
    - The "Factory Reset" described by the booklet that came with the 802.11n device is inconsistent with what I see when I try it. I get a single green blink followed by a long solid yellow (sorry Amber) followed by blinking amber. I never see 4 green blinks, as described.
    This is the worst Apple experience I've ever had. Period. Any more advice please before I take this POS back to the store and trade it for a punch in the ribs or a hot stick shoved in my eye?
    Message was edited by: jpembert

  • Problem about factory reset my iphone 4s

    My boyfriends has very big problem after he try to download iOS 8. He forgot an Apple ID password so he tried to sign up new apple ID and found that iCould still ask about old Apple ID password. He tried to type every but it wasn't work and then it was LOCKED. Unfortunately, his old email was deleted. He can't reset his password and forget about questions for reset password in iforgot.apple.com. Eventually, iforgot.apple.com is also LOCKED. I don't know what should he do? it shows notify that "This apple id has been disabled security reasons".
    Any one can you help me? Thanks for your kindness suggestion

    I found in internet that factory reset can restore everything
              --> I try to reset in Setting> General> reset> Erase all Content and Settings. --> it ask for passcode I type usually passcode that use for unlock screen but it's not work. I don't know why?
              --> I try to use reset via iTune but it asked me to close "Find My iPhone" first. But I can't because, I don't know password for iCound .

  • [SOLVED] A3500-FL problem after factory reset

    after a hard reset/ factory reset i get boot, but after that , all I see is a black screen with a spinning/ rotating circle in the middle.
    I can acces the notification area, but i cannot acces settings or launcher.
    help, please!
    P.S. i've read everithing about this model and couldn't find a solution. Any help will be highly appreciated
    Solved!
    Go to Solution.

    INCREDIBLE!!!
    the problem was that I was holding the tablet in portret orientation while it boots.
    So, I ACCIDENTALLY keep it in LANDSCAPE mode and, voila! it enters the welcome settings. So easy!
    I hope this will help others

  • Time capsule setting up problem after factory reset

    What's the next step after factory reset to set up my time capsule again???
    i did factory reset for 4-5 times and i cant use my time capsule to create a network, join an existing network or anything else.
    i also tried normal reset but still nothing can be done.
    There is always a message at the end " an unexpected error occured. Try again"

    Plug the TC into the computer by ethernet..
    Make sure the computer has no other network running and nothing else is plugged into the TC.. just TC Lan port to the computer ethernet.
    Now press reset and open airport utility.
    Generally you will have no issue once it is isolated. Do the setup and then you can disconnect and put it back in the network.
    If it doesn't work, is the LED on the TC flashing amber or what??
    Is the ethernet port connectivity LED on?

  • Problems with Factory Reset on EPC3925

    After performing a factory reset on my router, I am unable to log into the router in order to set up or change my wireless settings.
    The default admin/password login does not work (I've tried all combinations), and I am only able to login as a guest user (blank username/password), which does not let me change any settings.
    It is also stuck on bridged mode (router page is 192.168.100.1 instead of 192.168.0,1), which I am unable to change both due to both the lack of admin account as well as the fact that the factory resets do not revert it to router/non-bridged mode.
    Any help at all on how to log in and change these settings would be very much appreciated -- thanks!

    Hi CheshireCat and Welcome to the Cisco Home Community.
    The EPC/DPC3925 is an internet service provider (ISP) supported product. In other words you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
    However I did a search and found the DPC3925/EPC3925 manual that may help you: http://manual.upc.ro/pdf/epc_3925.pdf
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • IOS 7 upgrade problem forced factory reset

    I decided to try IOS 7 on my iPad 2. That was a huge mistake! After several attempts to download, it finally completed. The Install button was finally active, so I tried to install, and it indicated that the update was not available. I tried this several times with no luck. Finally I decided to try it from the PC. I loaded iTunes and saw that there was an IOS software update available, but in order to do that I had to upgrade iTunes to 11.1. Well, the Download iTunes Update button clicks but doesn't actually do anything. I eventually wound up just going to iTunes and downloading it again. It went through the install and finally updated.
    So I connected the iPad and it tried to load the IOS 7 update. In the middle of that iTunes just closed, no errors, nothing. Opening it back up, it tells me I must reset my iPad to factory settings. At this point I'm boiling, but I went ahead with it because I figured I would be able to just restore from a backup, which I fortunately created before all of this started.
    Well, iTunes was able to load the IOS 7 update on the iPad, but after it restarted from the factory reset, things have once again taken a turn for the worst. Now when I connect the iPad, it tries to access iTunes store, and tells me it can't, and to check the network and try again. Everything else that I do online is working fine from the PC so I know it's not that, but I restarted anyway. No change.
    So now I have an iPad 2 with IOS 7 in factory reset state, that I can't restore from backup or even get connected in iTunes. I only bought this iPad in the last month, so I supposedly have 90 days support from Apple, but every method I try to get support for it is either to send it in or take it to an Apple store. This is a nightmare. What should I do?

    My iPad 3 downloaded ios7, rebooted, started to execute the installation (same as my iPhone did).
    Then it got hung up half way through the execution.
    Have stared at the boot screen with a bar showing half-loaded for 12 hours.
    Several times tried hard reboot. Keeps getting stalled at half way.
    About to turn it into a discuss and throw it into the ditch!!
    Whiskey Tango Foxtrot!!

  • Problems after Factory Reset (Os X 10.8.5) (Quicktime)

    I've been having problems with my wi-fi and problems with my Macbook Pro shutting off and not wanting to power on over the past few weeks.  So, today I did a factory fresh install of my OS.  I noticed a problem with Quicktime videos stuttering when I maximize or minimize the video.  It only does it during that task.  I can fast forward it or rewind it without problems.  My wi-fi seems to be back to normal, but my Thunderbolt to Ethernet adapter is quite slow.  Not sure why..  Other than that, everything seems to be fine.  Starts up and shuts down good, and doesn't shut off randomly.  The Quicktime issue is not a huge one, but very annoying and I was wondering if anyone else has experienced this.  I am a DJ and I like to preview all of the videos I get. 
    My laptop is
    -2.3 quad i7
    -8 gb ram
    -1 gb gt 650m

    Can't remember if the Display menu bar icon was removed in Mountain Lion like it is in Mavericks, which makes it harder to switch between Extended Desktop and Mirroring.
    First try going to Apple > System Preferences > Displays > Display tab and see if checking "Show displays in the menu bar" is still available..?
    If it is, then you should still be able to select between Extended Desktop (Mirroring Off) and Mirroring On from the menu bar or by opening the Display Preference from there.
    If it is not, try > Mac App Store - Display Menu which will give you the Mirror Displays option on your menu bar.

  • Recovery problem or factory resetting error

    I have HP pavilion dm4 - 1070ee. I tried to recovery as factroy setting but recovery manager display that u don't have recovery partiton. but i alredy have recovery partition and recovery disk too. both are not supported. i tried by many diffrent way like: f11 key system restore but i can't . now i have change BISO driver too and some other drivers may be change too but all driver i installed from swsetup from my laptop. Pease give me the ideas that how do i can solve it?

    If you boot from disc 1 of the recovery set, it should start the recovery process.
    Put disc 1 in the drive and close it, restart the PC and when you see the HP logo start tapping F9 repeatedly and fast, you should get a boot device menu, select the cd/dvd drive from the list and hit enter key a few times, is should boot from that disc and load HP recovery.

  • How can I factory default - MiiX 2

    Hi, Today I had to buy the product - Miix 2
    I have a problem, that is don't know how to do factory reset MiiX 2
    Is there a way to do a factory reset?
    please help ... 

    Thank you for your reply, SEMAYAN
    but, I'm still having problem factory resetting,
    I can't find menu in the next step from "System Recovery" ... ;-(((((((
    I was checking out "System Recovery Partition" through Disk Manager on Windows
    I  guess it is not loaded on the system.
    How do I ?
    Next ... "Please wait" ... come on ! come on ! come on ! please ... !!!!!!!!!
    But, What is this? "Windows Recovery Menu" prompt on the screen ... :--((((((((((

  • Windows 8.1 update not shown after factory reset

    I had the windows 8.1 update shown on my app store but due to some problems i factory reset the laptop. when i opened it after the restore i was unable to find the update on my store. Rather it shows 96 apps to be updated

    Hi,
    If you want to install Windows 8.1 Update 1, there are two requirements:
    •Windows 8.1 is a prerequisite (vs Windows 8 RTM)
    •KB2919442 is a pre-requisite update - released in March 2014 – you'll need this before 2919355 will be recognized
    http://support.microsoft.com/kb/2919442/en-us
    Alex Zhao
    TechNet Community Support

  • Verizon...Stop with the "Do a factory reset" garbage...It does NOT work!!!

    Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says!  Get a new script for your customer service call center and delete the factory reset verbiage.  IT DOES NOT WORK.....PERIOD!

    randallg wrote:
    Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says!  Get a new script for your customer service call center and delete the factory reset verbiage.  IT DOES NOT WORK.....PERIOD!
      I do believe for some problems a Factory Reset is the right answer, but not when it comes to missed calls/text messages.

  • Problems with a new IP phone 7906 after factory reset

    Hi Guys
    I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
    http://www.youtube.com/watch?v=vvCLtwIAwVw
    I used this command I found on the net:
    Hold down
    while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking.  Then
    release # and type 123456789*0# in sequence.
    I was trying to switch my phone to sip and it also dont want to take tftp setup either.

    Tim,
    Found this on the net
    http://www.cisco.com/en/US/ts/fn/620/fn62949.html
    Might be woth giving it a go
    6.Pull power on the phone (even if power is PoE).
    7.Hold down the # key on the phone.
    8.Continue holding down the # key and re-apply power.
    9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
    10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
    3491672850*#
    Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
    * Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
    Additional Diagnostic Steps:
    - Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
    - Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
    Regards
    Alex

  • My ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

    my ipad automatically jumps from one app to other. it automatically types things randomly. i dont know what it wrong. Have shown it in a service center. they have done factory reset but problem still persist.

    Likley a defective touchscreen.

  • My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

    My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

        We want you to enjoy the best reliability with your Droid 2 Jaxie! What specific problems are you having with the device? Is your software up to date? The latest version available is: 4.5.621.A955.Verizon.en.US. If the software is up to date, we recommend running the device in safe mode to determine if third party apps may be causing the issues. I hope this information is helpful.
    http://bit.ly/IPw5jE
    http://bit.ly/o5McAQ
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

Maybe you are looking for