Probleme centre de solutions c4380

probleme centre solutions c4380

It will vary according to the type of video software you are using.  If you are using Quicktime, these are the commands:
Ciao.

Similar Messages

  • My iPhone 4 appears with no service every day, i have to restarted and a few hours later again the same problem, Any other solution please???

    my iPhone 4 appears with no service every day, i have to make restart and a few hours later again the same problem, Any other solution please???

    This is almost always a symptom of a phone that was jailbroken or hacked to unlock it.
    Where did you get the phone?

  • HT5654 after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions

    after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions?

    I had this problem.  I held down the power switch to power down completely.  Takes a few seconds.  Then use the power switch to turn on.  Might take a couple goes.
    Kirk

  • I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

    Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

  • When I try backing up to icloud it says that I have gone over the free 5gb. It shows that I have 4.6 gb of pictures in my camera roll when I barely have over 200 pictures! Any similiar problems or possible solutions?

    When I try backing up to icloud it says that I have gone over the free 5gb. It shows that I have 4.6 gb of pictures in my camera roll when I barely have over 200 pictures! Any similiar problems or possible solutions?

    You're welcome.  Given the number of people who seem to have problems restoring photos from their backup I wouldn't trust the iCloud backup for my photos anyway.  I always import them to my computer at least weekly.  That way I know I have them.
    You might want to check out the app PhotoSync.  It makes this pretty easy as it transfers them to your computer wirelessly and keeps track of which ones have already been transferred.

  • Nokia X3 Problem n need Solution

    Nokia X3 Problem n need Solution :
    the problem is,my nokia X3 ringtone sound so slow/soft...
    n the keypad button sound more strong then ringtone sound,n two of them at the full volume...
    but,i already put the volume to higher posible ( full volume )..

    Some devices may need to have their software reset in order to see the latest benefits, or to resolve other potential problems. - Ensure you have the latest version of Nokia PC Suite. - Backup your device memory to your PC using Nokia PC Suite - Copy your files (music, videos, documents, images etc) from the Nokia N91 hard drive to your PC (use of USB mass storage recommended). - Copy any original SISX, Java, etc. installation files for your applications, themes, etc. from your Nokia N91 hard drive or memory card to your PC. (Do not simply copy over the installed directories/files.) - If your device has an internal hard drive, format your Nokia device’s hard drive by selecting Tools > Hard drive > Options > Format hard drive > Quick format (instructions are also in user the guide). - After the device has completely started up again, reset your device memory by selecting Menu > Tools > Settings > Phone > General > Orig. Phone Settings and entering 12345. - Restore your device memory from your PC using Nokia PC Suite by selecting Backup from the PC Suite menu and then selecting Restore. - Copy any hard drive or memory card contents from your memory card or PC back to your clean hard drive or memory card. - Re-install your applications/themes. If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • My droid razr m suddenly developed a high pitched buzz while ringing and when callers are speaking. It doesn't buzz while on speaker. Any one have same problem or a solution to it?

    My droid razr m has developed a high pitched buzz while ringing and when callers are speaking. It does not buzz when on speaker. Anyone have this problem or a solution to it?

        Teakman lets make sure your device is clear as a whistle! There is not a known audio issue with the Droid Razr M so it appears this may be an hardware defect with the device. To make certain that's not an internal issue, I would recommend completing a Hard Reset http://vz.to/1kEchad .
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • The Norton Toolbar 4.6 is disabled in Firefox 4 while it is working in previous version of Firefox. In Firefox 4 it opens with massage Norton Toolbar is incompatible in firefox 4. Is this problem have any solution?? pls tell me.

    The Norton Toolbar 4.6 is disabled in Firefox 4 while it is working in previous version of Firefox. In Firefox 4 it opens with massage Norton Toolbar is incompatible in firefox 4. Is this problem have any solution?? pls tell me.

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have released an update for Norton 360 to make it compatible with Firefox 4, for details see http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about other Norton products, but if you run Norton LiveUpdate it should inform you if there are updates available. If no updates are available, you can downgrade to Firefox 3.6 if you want to use the Norton add-ons.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I cannot upload my iPhoto book to the Online Store.  I get an error message that I cannot connect.  Instructs me to try again later.  Apple support said servers are too busy. Anyone else have this problem and a solution?

    I get an error message that I cannot connect.  Instructs me to try again later.
    Try again later?
    LN

  • The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    I agree and I found your post because I did a google search ical typeface dim.
    If I find anything out, I will post back here.

  • HT1351 The music tracks I have up loaded to icould shows up on my ios devices but I cant play them ? Has anyone had a similar problem / knows a solution.

    The music tracks I have up loaded to icould shows up on my
    ios devices but I cant play them ? Has anyone had a similar problem / knows a
    solution.
    The same tracks play fine on apple tv

    Done that . Been using paid service for a long time . Works for all my content just not working for 3 albums I added recently .
    they show up on all my devices But just can't play them . Any suggestions ?

  • Centre de solution HP

    Bonjour, j'ai un problème pour afficher le Centre de solution HP de mon imprimante HP Officejet j6400 tout en un.   Lorsque je clique dessus, la fenêtre apparait 2 secondes et disparait.
    HP me recommande de télécharger et d'installer le logiciel Adobe flash Player la version 9 ou ultérieure.
    Présentement j'ai Adobe flash player 10 activeX et Adobe flash player 10 pluging
    Je n'ai pas plus de résultat avec Adobe flash player 10 activeX
    J'ai Vista 32 bits et Internet Explorer comme navigateur.
    Je suis nouvelle sur le forum et je ne sais pas si j'ai écrie à la bonne place
    Comme HP n'a pas pu m' aider je me tourne vers votre site en espèrant règler mon problème une fois pour toute
    Une réponse en français serait appréciée.
    Merci
    Louise 2010

    Hello there,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • YouTube login & linking problems - one possible solution

    Rather than add this comment to one of the several topics concerning YouTube login and account linking problems, I'm starting this topic to isolate this particular problem and the solution that worked for me.
    * SKIP TO LAST LINE FOR MY SOLUTION ->
    The problem I experienced surfaced when I first tried to upload a video to YouTube from my iPhone 4. YouTube would no longer accept my YouTube password. My YouTube account was linked to my gmail.com account. Having read some of the suggestions in other threads, I unlinked the two accounts, but that did not help matters.
    I signed out of the YouTube app in order to sign back in, as suggested elsewhere, but then I could no longer sign in to the YouTube app.
    So I tried shutting down my iPhone and starting it up again, as was also suggested elsewhere. That didn't help.
    So, exasperated, I went to the YouTube site and tried to change my YouTube account password to itself - and therein lay the solution! YouTube told me the password has to be 5 to 20 characters long and my (old) password was only 4 (because I had created my YouTube account long ago before they had that requirement.)
    Once I set a new password that was long enough to satisfy this requirement, I was able to login to the YouTube app just fine and everything is working.
    * The solution -> MAKE SURE YOUR YouTube PASSWORD IS LONGER THAN 4 CHARACTERS
    Message was edited by: caf
    Message was edited by: caf

    No, it didn't work. After buying my MacBook Pro I updated everything including QT. As a result QT 7.2 simply didn't play any of my divx avi files. Before adopting the rude way, I obviously tried to update/replace all of the components including: Perian, DivX, Flip4mac. No way. I then forced a downgrade to ver. 7.1.6 using Pacifist (a package manager) and as a result I put the hole system in danger. It was in a total state of malfunction. I had to restore the system with the cd. Fortunately it kept my home! But I now run ver 7.1.6 and I do NOT have any intention to update it. I use Pro so I don't have any necessity of full screen support or else. Maybe if Apple will release a stable version I will consider the update. But for now, "nowing it is not installing it".

  • Vista "Problem Reports and Solutions" - Compatibility issues?

    The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
    ( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
    *The Problem Reports and Solutions control panel reports the following:*
    1. Download and install the driver for Apple performance counter
    This problem was caused by Apple performance counter, which was created by Apple Inc..
    2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
    3. Problem caused by Apple Desktop Null Driver.
    This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
    Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
    Mac OS 10.5.5 , bootcamp 2.1
    Message was edited by: noutram

    A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
    A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
    I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
    The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

Maybe you are looking for

  • Error message when trying login to Network Monitor "oops something went wrong"

    I am trying to get network monitor to work on my network. However, when installed I enter my credentials and get the error something went wrong. I am assuming we are blocking some traffic on the firewall or possibly even through a content filter. Wha

  • Can't edit in Design tab - "overflow: hidden (double-click to edit)" - cause, remedy?

    In the Design tab, the content of some web pages becomes uneditable (where it had previously been editable), even though it is in an editable region in the template. All of the uneditable text has a black background. When the cursor is floated over t

  • I think there is a bug in belle

    i recently connect my nokia 500 to a wifi connection all things are going good then i try to connect it by 3g nothing happens in the browser then i reinstall firmware than it say connection fails and then after few more trials nothing happens in the

  • Force roundtrip in SET_Attribute method

    Hi, i developed a small view with attributes like: STARTDATE - default = today ENDDATE - default = today + 7 If the STARTDATE is changed i developed in the SET_STARTDATE to set the new ENDDATE like this: date7 = <nval> + 7.       current->set_propert

  • Need a password

    I try to download Adobe Flash Player but it asks me for my computer password...where do I find that? It says it has something to do with racquetball