Problème d'accès au dmz à partir de l'externe

Bonjour,
Comme je suis débutant dans le domaine, je vous prie de m'aider à résoudre mon problème. en faite j'ai un firewall ASA 5510 qui est encore neuf, l'objectif est de mettre en place une zone DMZ pour publier un serveur web dedans. depuis les recherches que j'ai fait, j'ai pu la mettre en place et établir ces accès:
DMZ ==========> outside OK
INSIDE ==========> DMZ OK
DMZ ============> Inside OK
le probème c'est que j'arrive pas à accéder à mon serveur web qui est dans la zone DMZ à partir de l'externe. Outside =======> DMZ NOK
Pour être plus claire, j'ai mit en joint le fichier "sh run". je vous prie de jetter un coup d'oeil et me dire à quel niveau le problème existe ?
Cordialement.

You would need to configure static PAT on port 80 as well:
static (DMZ,Foptique) tcp interface 80 10.10.10.2 80 netmask 255.255.255.255
(the above is assuming that your web server ip address is 10.10.10.2).
Actually, the following global statement should not include 10.10.10.2, if that is your web server ip address:
global (DMZ) 1 10.10.10.2-10.10.10.50 netmask 255.255.255.0

Similar Messages

  • How to access XML files on public part of an external library DC?

    Hi,
    I would like to put xml and xsd files into a public part of an external library DC, so that I can access these files within other DCs. But I don't know the path which I have to use in the other DCs, e.g. for creating a File object from such xml or xsd files. What do I have to do to get this running?
    I'm using NetWeaver CE 7.2 for Java.
    Thanks in advance for your help!

    An External Library DC is only intended to include jars. Using a Java DC may be a better idea, unless you put your xml files into a jar first (but you'd need a Java DC for that...).

  • Problème d'accès à iWork sur iPad 2 depuis maj du 7 décembre

    Je n'arrive plus à accéder aux 3 applications d'iwork depuis la dernière mise à jour du 7 décembre . Cela fonctionne sur mon iPhone 4 s mais pas sur mon iPad 2 , l'écran reste vide .... Help me please....

    Bonjour,
    Ce site est plutôt en anglais ... (pour avoir des réponses).
    Moi j'ai acheté le mien fin juillet à FNAC Cannes. Lion était installé et j'ai fait l'update ML quand il est sorti. J'aurais mieux fait de m'abstenir. Sous Lion je n'avais même pas vérifié si j'avais bien les 7 h annoncés...
    Si vraiment le votre vous a été livré avec ML installé usine, c'est que le problème vient des versions successives, 10.8.1 et 10.8.2.
    Il faut donc patienter jusqu'à la prochaine livraison ML (10.8.3 ?) et espérer que l'autonomie de départ soit restaurée !
    jm

  • Installateur : problème d'accés au clé registre

    Bonjour,
    J’ ai développé une application labview incorporant des clés registres. Actuellement le programme fonctionne correctement en local (machine avec labview). Mais lorsque je crée un exécutable et que je l’ importe sur une autre machine vierge (sans LV) il affiche : Accès au registre distant impossible donc impossible de créer la clé.
    Ma question est: Dois-t-on rajouter des modifications lors de la création du fichier .exe pour qu’ il prenne en compte les clés registres ou pas ?
    NB : je dispose des droits administrateur donc c’ est pas ça le problème
    Merci pour votre réponse
    Bien cordialement

    Salut,
    Je pense que Roderic a raison, c'est surement et simplement que le Runtime LabVIEW n'est pas installé.
    Pour installer le moteur d'execution sur une machine ne possedant pas LabVIEW, il suffit de créer un Installeur dans ton projet LabVIEW, de la même manière que tu as créé un Executable.
    Dans les propriétés de ton Installeur, n'oublie pas de rajouter ton executable dans les fichiers sources et coche "Selectionner automatiquement les installeurs recommandés" qui sont les moteurs d'execution LabVIEW et VISA. De cette façon, ce fichier Setup installe les moteurs d'execution et ton executable en même temps. (Pour se faire plaisir, LabVIEW permet également de personnaliser les informations des boites de dialogue, comme les messages de bienvenue ou les bannières personnalisées...)
    Installer un Runtaime LabVIEW pour la première fois sur un poste prend un peu de temps, de l'ordre de 10 ou 15mn, donc sois patient... ^^
    Bilsix

  • Problème d'accès aux outils

    Bonjour
    Je suis sur PSE6 et depuis peu, je ne peux plus accéder aux différents outils. j'ai uniquement la main à la place des outils sélectionnés.
    Avez-vous une idée de l'origine du problème et surtout comment le résoudre
    Merci d'avance et bonne année

    Vous pouvez choisir Fenêtre-> Outils, puis choisissez l'outil de la barre d'outils sur le côté gauche

  • Problème d'accès au dossier elements 13

    Bonjour,
    dans l'organizer elements 13, lorsque je clique-droit sur une photo, j'ai dans le menu déroulant la possibilité d'accéder au dossier contenant cette photo. Après l'avoir fait une fois, si je veux recherche une autre photo, le menu déroulant après cliquage-droit me montre "accéder au dossier" en grisé, et donc est inutilisable. J'ai beau cherche, je ne vois pas comment réinitialiser cette fonction.
    Merci pour votre aide
    Léon

    You would need to configure static PAT on port 80 as well:
    static (DMZ,Foptique) tcp interface 80 10.10.10.2 80 netmask 255.255.255.255
    (the above is assuming that your web server ip address is 10.10.10.2).
    Actually, the following global statement should not include 10.10.10.2, if that is your web server ip address:
    global (DMZ) 1 10.10.10.2-10.10.10.50 netmask 255.255.255.0

  • Problème pour accéder au menu 3D dans Photoshop CS6

    bonjour, je viens de télécharger la mise à jour de Photoshop CS5 par la CS6 et dans le menu je ne peux pas accéder au menu 3D. Je pense que ce doit être à cause du fait qu'il soit en 64 bits, comment faire pour changer en 32 bits ? merci

    Bonjour,
    La première chose est de vérifier si votre carte grahique a minimum 512Mb de mémoire.
    Vous pouvez faire un CMD+I sur Photoshop ,vous aurez le moyen de démarrer en 32bits mais cette option a disparu sur les derniers MAC OS .
    Cordialement ,

  • Problème d'accès au portail Training.

    bonjour. Je suis partenaire et je n'arrive pas à me connecter sur le portail training. Pouvez-vous m'aider ?

    You would need to configure static PAT on port 80 as well:
    static (DMZ,Foptique) tcp interface 80 10.10.10.2 80 netmask 255.255.255.255
    (the above is assuming that your web server ip address is 10.10.10.2).
    Actually, the following global statement should not include 10.10.10.2, if that is your web server ip address:
    global (DMZ) 1 10.10.10.2-10.10.10.50 netmask 255.255.255.0

  • In french please, thank: problème de connexion ou problème de compréhension de ma part? j'aimerai bien être remboursée!!!

    j'ai acquis en février dernier cette application, en ayant besoin aujourd'hui j'ai été surprise de constater que je n'étais pas reconnue. j'ai don refait l'acquisition. Est-ce normal? merci de me rembourser.

    "cette application" - c'est quoi?

  • J'ai un problème , j'ai voulu installer a partir de iTune "iOS 6 " arriver a la fin de l'installation , mon iPod Touch 4G reste bloqué sur le logo Apple et en dessous une barre de chargement , que faire pour qu'il sallume ?

    MOn ipod est bloqué sur le logo et en dessous une barre de chargement vide , est-ce-qu'il charge ? je ne sait pas ... . j'aimerait savoir comme je pourrait le rallumer ou au moin pouvoir  l'utilisé , j'ai voulu instaler 'iOS 6 " , sur iTune il me disent que l'ipod est normal , je ne vois aucun probleme d'ereur , je veut juste savoir que signifie , ce logo et cette barre de chargement ? merci .

    Google translate:
    MOn ipod is stuck on the logo below and a loading bar empty, do-it loads? I do not know ... . I would like to know how I could turn on the power or used moin, I wanted instaler iOS 6 "on iTune it tell me that the ipod is normal, I see no problem with ereur I want that just means the logo and the loading bar? thank you.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Using only part of an external hard drive from Time Machine?

    Hi. I have a Western Digital external hard drive that I currently use as back-up for some PC files. Can I partition that external hard drive and use part of it for Time Machine? Apple seems to recommend that the external hard drive be used 100% for Time Machine, but perhaps others have successfully done this? If it is risky, I'll just get another external HD, but I thought I'd first check if I could use the one HD for both PC and Mac. Thanks!

    yes, you can. there is certainly no requirement that the whole drive be dedicated to TM. what IS advisable however is to dedicate the whole partition to TM. You can keep other stuff on a TM partition but I wouldn't recommend it.
    However, keep in mid that the whole drive needs to have correct partition scheme (GUID for intel macs and APM for PPC mac). Your drive is almost certainly partitioned with MBR partition scheme. If that's the case it will have to be completely reformatted before you can use it for TM. you can reformat it and make two partitions. one formatted mac os extended to be used for TM and the other formatted FAT so that you can use it both on a MAC and a PC.
    P.S. Keep in mid that the partition formatted FAT will not be backed up by TM.
    Message was edited by: V.K.

  • Spare parts and Equipment [ External service]

    Experts,
    Would like to check the process to handle the external service for equipment [w/o material master] and for spare parts.
    Scenario is that these equipments / spare parts are send out for service outside country and then come back after servicing.
    Alok

    HI
    The closest process that suits your requirement is sub contractor process in SAP or else you might need your ABAP team for creation of new transaction for the process
    well the sub contractor process involves creating a PO with Item cat L and entering the required materials and issuing the goods to subcontractor for service, later u receive it through MIGO and Then MIRO
    Regards
    John

  • Can't access part of an external drive

    Hi
    I have an external drive plugged into my Mac and, today, I've not been able to access just one folder with the drive. I ran Disk Utility and it told me the drive was damaged and could not be repaired without reformatting.
    I'm keen to recover the data within the folder. Can anyone suggest a way of doing this, please?
    Cheers
    Phil

    Phil:
    I've not been able to access just one folder with the drive.
    Does that mean that you were able to access/recover everything else?
    See if Dr. Smoke's FAQ Data Recovery helps. You can download DataRescue 3 and see if can locate the folder. If it does you will need to purchase the license to recover it.
    cornelius

  • How do I part ion an external hard drive used for time machine?

    I have a Seagate 1.5 T external harddrive I'm using for Time Machine. I would like to partition it so I can store other files and photos on it. How do I do it??
    Thanks,
    JD

    In Disk Utility
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1725.html
    Message was edited by: b j t

  • Splitting my music library --part on my computer, part on an external HD

    I currently am running out of memory on my laptop computer and need to move some of my music to an external hard drive. However, I would love to be able to retain about half of my music to the hard drive and leave half (the half I listen to most frequently) on my laptop. Maybe this is an easy question, but when I tried to move music folders a while back, I really messed up my library.
    thanks in advance

    I recommend using two library ITL files for this.
    One ITL would be all your content, all stored on your exHD. That ITL file itself should also be on the exHD, so you can only open it when the exHD is attached to the laptop. You'd use these directions to consolidate the library to the exHD, but skip steps 11 & 12. A word of advice, name the exHD something pretty far down in the alphabet like M: so Windows doesn't change it on you when you plug something else into a USB port.
    http://support.apple.com/kb/HT1364
    The second ITL file would be on your laptop's ITL C: drive. It would start out being the entire library, but then you'd delete the songs you don't want on your laptop.

Maybe you are looking for

  • Iphone 2.0 software update HELP ME PLEASE

    Hi I have original Iphone and have downloaded the update as described on many forums but although I follow the instructions posted ITunes gray's out the open button even with the IPSW extension on folder is this because it is a US update and not UK?

  • PDW : DWLoader in Execute Process Task, Success Value return code

    Hi, I'm using SSIS Execute Process Task to call DWLoader. It seems the Success Value return code is 2. Which is working fine except that after all data are loaded in my table a 0 return code is sent. And so my task fails. Any idea how to handle this

  • Remove Spots Cursor Problem

    I have a strange problem with Remove Spots on my desktop PC (WinXP, Core Duo 2.4, 4Gb Ram) running LR 1.3.1 The remove spots cursor seems to have some sort of crazy damping effect (the best way I can describe it). If I move the cursor then stop, the

  • Is my iTunes store password & Apple ID the same thing?

    I want to change my iTunes store password. If I do this am I also changing my Apple ID password? (Are they one & the same?) Ideally I'd like a different password for iTunes to my Apple ID one, just checking if they're the same thing?

  • Running dragon naturally speaking with parallels

    I just bought a new mac book running snow leopard and after doing all the appropriate transfers of data from my previous mac I tried to run the dragon medical speaking program that had worked very well on the first mac. The first problem I had was th