Probleme de configuration de noeud de sous-vi
Bonjour,
J'utilise un sous-vi pour afficher un graphe dans une seconde fenetre de mon application. Comment rafraichir le graphe sans que celle-ci devienne active? (je voudrais que la fenetre principale de mon application reste active quand le graphe du sous-vi est rafraichie dans la seconde fenetre). J'ai regarde les options "Configuration du noeud du sous-vi" en faisant un clic droit sur celui-ci au niveau du diagramme + les options dans "Fichier / Proprietes du Vi / apparence de la fenetre" mais sans succes.
Merci,
JF
Bonjour,
Merci pour votre reponse. J'ai essaye de rajouter votre code mais ca ne correspond pas tout a fait a ce que je souhaite faire (j'ai peut etre mal compris votre code). Ci joint un exemple simple code avec Labview 8.2: le vi principal genere un sinus en boucle et l'affiche dans un graphe, ce graphe est egalement affiche dans une seconde fenetre via un sous-vi. Je voudrais que les donnees soient rafraichies dans les 2 fenetres sans que l'une ou l'autre passent en face avant quand elles recoivent les donnees (ie que je puisse passer d'une fenetre a l'autre uniquement par clic souris).
Merci,
JF
Attachments:
exemple.vi 51 KB
graph_window.vi 19 KB
Similar Messages
-
Problem in configuring Terms of Payment
Hello Friends,
I'm facing a problem during configuration of payment terms in which i give 15% discount to the customer if paid within 15 days & also the credit period is 15 days for net payment. When i try to configure the same i get an error message FC114 - Enter periods in ascending order, since the cash discount period & the credit period are the same.
Payment Terms - Within 15 days 15% discount, Within 15 days due net
Request your assistance.
Regards,
PadmanabhanHi Padmanabhan,
your requirement is not clear, for both the options are on the same day, there should be some difference in days for a discount and net payments in any business, try to collect correct requirement from your client. It may be further 15 days from the due date for discount, then it becomes 30 days.
How do you offer both options to your customers, in any business i did not heard such terms,
correct me if i am wrong.
Bye
Venkat Cheedalla. -
Problem with configuration of wifi newtork- dhcp
hi.
i've got a small problem with configuration of wi-fi network.
i use dhcp network.
there are some errors about network during boot up (but its to fast for my to write it down)
after log-in i have to setup network access by typing
iwconfig eth2 essid SpeedTouchBCE72F
and then i heve to run this command
dhclient
and after that i've got an access to internet
this is my rc.file
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="-u pl2"
CONSOLEFONT="lat2-16.psfu.gz"
USECOLOR="yes"
LC_ALL="pl_PL.UTF-8"
LESSCHARSET="UTF-8"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="linugrat"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth2="dhcp"
INTERFACES=(lo eth2)
ROUTES=(!gateway)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng ipw3945d network netfs crond)
# End of file
szymonHi Mariano
I think you need to <b>restart your portal Engine</b> after making correct settings.
Also please refer to the link below to get a better insight:-
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/719a425ffac46ae10000000a155106/frameset.htm
Regards
Navneet -
Problem in configuring sunoneportal
Hi all,
I am installing Sun java portal server 7 with JES 5 on windows xp and having problems in configuring it when i want to login to portal server console login then the authentication fails .I checked the log file I found this two exceptions
#|2007-10-25T15:08:00.303+0200|WARNING|SJS Portal Server|debug.com.sun.portal.admin.server|ThreadID=13; ClassName=com.sun.portal.admin.server.PASMechanism; MethodName=parse; |PSAD_CSPAS0000 : Exception stack trace for the message above
com.sun.identity.authentication.spi.AuthLoginException: Failed to create new Authentication Context: Naming Service is not available.
at com.sun.identity.authentication.AuthContext.login(AuthContext.java:516)
at com.sun.identity.authentication.AuthContext.login(AuthContext.java:356)
at com.sun.portal.admin.server.PASMechanism.parse(PASMechanism.java:169)
at com.sun.cacao.agent.auth.CacaoCallbackHandler.handle(CacaoCallbackHandler.java:98)
at com.sun.jdmk.security.sasl.plain.PlainServer.verifyAuthenticationCredentials(PlainServer.java:186)
at com.sun.jdmk.security.sasl.plain.PlainServer.evaluateResponse(PlainServer.java:118)
at com.sun.jmx.remote.opt.security.SASLServerHandler.consumeMessage(SASLServerHandler.java:124)
at com.sun.jmx.remote.opt.security.AdminServer.connectionOpen(AdminServer.java:176)
at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl.connect(ServerSynchroMessageConnectionImpl.java:51)
at javax.management.remote.generic.GenericConnectorServer$ClientCreation.run(GenericConnectorServer.java:383)
at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)
java.lang.NoClassDefFoundError: Could not initialize class com.iplanet.services.naming.service.NamingService
com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:690)
com.iplanet.services.naming.WebtopNaming.getNamingProfile(WebtopNaming.java:603)
com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:405)
com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:381)
com.iplanet.services.naming.WebtopNaming.getAMServerID(WebtopNaming.java:159)
com.iplanet.dpro.session.Session.<clinit>(Session.java:317)
com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:100)
com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:242)
com.iplanet.am.console.base.ConsoleServletBase.checkAuthentication(ConsoleServletBase.java:352)
com.iplanet.am.console.base.ConsoleServletBase.validateSSOToken(ConsoleServletBase.java:238)
com.iplanet.am.console.base.ConsoleServletBase.onBeforeRequest(ConsoleServletBase.java:188)
com.iplanet.jato.ApplicationServletBase.fireBeforeRequestEvent(ApplicationServletBase.java:1105)
com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:591)
com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)could any one help ? thanksThe easiest way to get Portal to run on Windows is by using the pre-configured zip file distribution. You simply unzip the file and run a quick setup script and then the entire portal with three samples is up and running. The JES installer is not needed.
-
Problem in configuring third party JMS provider
Hi,
I am having a problem in configuring Sun MQ 4.4 JMS provider with weblogic 10.3.I tried the following method:-
1. Created a new outbound connection pool.
2.In the properties for the connection pool :-
ConnetionFactory Location :- myTestCF (this is the remote connection factory JNDI)
Factory properties :- java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory;java.naming.provider.url=file:/C:/my_object_store;java.naming.security.principal=admin;java.naming.security.credentials=admin
3.Provided the username and password also.
But when I am testing it from a SOA composite through a JMS adapter, it is giving me an exception indicating it could not locate the connection factory.I am clueless why this is happening.I've also tried with putting the sun mq jar files inside the <%wl_home%>/user_projects/domains/<%my_domain%>/lib folder.But it did not work.Please help.
Thanks,
RahulIn third party process SO / PR / PO should be in integrity. Your manual modification violates this I think (you are making one PO item from two SO item...).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/560287545a11d1a7020000e829fd11/frameset.htm
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order.
Regards,
Csaba -
Problem parsing configuration/hibernate.cfg.xml
I am trying to integrate struts with hibernate. I have created a plug-in for that and copied all the necessary jars & xmls to the classpath. I am providing the full stack trace, can any one say what could be the problem
net.sf.hibernate.HibernateException: problem parsing configuration/hibernate.cfg
.xml
at net.sf.hibernate.cfg.Configuration.doConfigure(Configuration.java:963
at net.sf.hibernate.cfg.Configuration.configure(Configuration.java:902)
at net.sf.hibernate.cfg.Configuration.configure(Configuration.java:888)
at com.plugin.HibernatePlugIn.initHibernate(HibernatePlugIn.java:72)
at com.plugin.HibernatePlugIn.init(HibernatePlugIn.java:54)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServle
t.java:869)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.
java:1029)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:86
2)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContex
t.java:4013)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4
357)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase
.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:80
7)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDep
loyer.java:277)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:625
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:431
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java
:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl
eSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478
at org.apache.catalina.core.StandardService.start(StandardService.java:4
80)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:231
3)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Caused by: org.dom4j.DocumentException: hibernate.sourceforge.net Nested excepti
on: hibernate.sourceforge.net
at org.dom4j.io.SAXReader.read(SAXReader.java:358)
at net.sf.hibernate.cfg.Configuration.doConfigure(Configuration.java:958
)Looks like a problem with Hibernate itself parsing the config file?
Here's a posting from the Hibernate forum that sounds similar:
http://forums.hibernate.org/viewtopic.php?p=2256871&highlight=&sid=e1090f717891db4535310102c61bec25
-steve- -
FAcing problems in configuring multiple macs(imac and mac book) pro) on time capsule
FAcing problems in configuring multiple macs(imac and mac book)
You may find these links useful:
http://pondini.org/TM/Time_Capsule.html
http://pondini.org/TM/4.html
Ciao. -
Problem in Configuring the Object Editor User Interface
Hi,
I m using NetWeaver 7.0.11 & facing the problem in Configuring the Object Editor User Interface.In the Configuration Browser ,when i click on Object Editor & choose New Configuration & try to select service,it shows the flollowing error:
com.sap.caf.rt.exception.CAFBaseRuntimeException: Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject.
at com.sap.caf.rt.ui.cool.generic.ServiceFacade.init(ServiceFacade.java:121)
at com.sap.caf.rt.ui.cool.generic.ServiceFacade.<init>(ServiceFacade.java:50)
at com.sap.caf.rt.ui.cool.generic.ServiceFacadeFactory.getFacadeInstance(ServiceFacadeFactory.java:51)
at com.sap.caf.ui.utils.cool.CoolUtils.getServiceFacade(CoolUtils.java:123)
at com.sap.caf.ui.ptn.objecteditor.ObjectEditorCC.getServiceFacade(ObjectEditorCC.java:505)
at com.sap.caf.ui.ptn.objecteditor.wdp.InternalObjectEditorCC.getServiceFacade(InternalObjectEditorCC.java:245)
at com.sap.caf.ui.ptn.objecteditor.config.OEconfiguratorLayout.onActionSelectModule(OEconfiguratorLayout.java:322)
at com.sap.caf.ui.ptn.objecteditor.config.wdp.InternalOEconfiguratorLayout.wdInvokeEventHandler(InternalOEconfiguratorLayout.java:300)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Can anybody please tell,what can be the problem?
regards
SumitHello Sumit
This is most probably the result of metadata corruption on runtime.
A possible workaround for this situation is:
Undeploy all the metadata DCs of all the CAF applications you have
deployed (these are the components which names end on "/metadata", excl.
caf/core/metadata and caf/tc/metadata (which are part of CAF itself)).
And then deploy the CAF applications again.
Regards,
Désiré -
Facing some problem while configuring Workflow Manager 1.0.
Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh AgravatRajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation. -
i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = kull )
my database name is kull
please somebody helpBiswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database". I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias lsn
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 05-JUL-2013 19:08:06
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor -
Problem in configuring Apache Web Server v2.2
Hi,
I am facing problem in configuring apache web server with tomcat 7.0. I want to configure the web server in such a way that I can access the application only using the localhost(without appending the port to it). Ex I want to access the application through "http://localhost" instead of "http://localhost:8080".
I tried to configure it using the concept of vertical clustering and "load balancer", but failed to do that.
Can anyone please tell me steps to configure apache web server with tomcat or provide any useful link / urls to do that one.
Thanks in advanceThe only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun -
i have just downloaded a new version of Iphone software on my iphone 3 . but i'm facing problem in configuring it . also tried to configure it with itunes but it always says that there's no sim card in your phone and previously i was using same sim without any problem . need solution . kindly help .
Hello ashharuddin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Have a nice day,
Mario -
Problem to configure Blink Pro (App). Error SSL certificate verification error (PJSIP_TLS_ECERTVERIF) (503)
Hi, William
My question is if you can help me and support me to configure the Blink Pro App, I have a Mac Book Air, OS X 10.9.1.
hope for your answer -
Problem in configuring Portal 3.0
Hi,
I am using Oracle 9iAS Rel 1.0.2.2.2a with 9i database Rel 9.0.1 on windows2k server. I am able to login with "sys" in normal mode by adding
"O7_dictionary_Accessibility = True" to the parameter file. But the problem is that the portal needs "shared_pool_size = 31457280", whereas, I have given "shared_pool_size = 33554432" which is heigher than the required size.
I have tried even with Oracle 9iAS Rel 1.0.2.2.0 but i still get the same error.
Please help me to come out of this problem and configure the portal.
Can mail to [email protected]
Thanks,
Ravindramust apply patch for bug 2014354, base bug: 1874284, on this platform.
-
Problem in configuring collaboration rooms.
Hi Experts,
I have a problem with configuration of collaboration rooms. I took the standard iview of room creation wizard. After the room is created we get a message xxx room is created and a link Enter room.
When we click the link of Enter room , we will be able to enter the room with the left hand side showing Detailed Navigation, My Rooms, Related rooms, Members list etc.,
But in my case i am getting all errors in that place. also the main view of next meeting iview is also not there. The below is the error::::::
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/506ee645-ab53-2a10-d7a3-88fd2e384f19/workset/MeetingRoom/com.sap.netweaver.coll.RoomMemberList_1
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Thanks
kavitha.
Message was edited by:
kavitha harikaHi,
Logon to portal as Administrator.
Goto System Admin>Permissions>Portal Permission>Portal Content>com.sap.ip.collaboration & assign permission...
More info refer this link
http://help.sap.com/saphelp_nw70/helpdata/en/f6/2604f005fd11d7b84200047582c9f7/frameset.htm
Regards,
Senthil K.
Maybe you are looking for
-
How to update the acknowledgement numbers of Qtly statements in TDS cert?
Dear All, In the TDS certificate printing for India, there is a field to fill teh acknowledgement numbers of all the quarterly statements of TDS. How do we update this field. What is the transaction or the setting to do this. Kindly provide your valu
-
Report obsolete returns diff results when backups are UNAVAIL vs AVAIL
Hello from Nova Scotia, Canada: I'm wondering if someone out there who lives and breaths rman (10gR2) for a living can shed some light... We are finding that report obsolete (as well as delete obsolete) are returning different results depending on if
-
Not able to attach file above 5MB after increasing attachment size to 10 MB
Hi, My environment, Exchange 2007 Exchange 2010 Migration is in process. Max Send size is set to 10 MB Max Receive size is set to 10 MB. Issue:- After increasing my sending and receiving size, exchange 2010 users are unable to add attachment in outlo
-
[svn] 4918: Missing file from previous checkin.
Revision: 4918 Author: [email protected] Date: 2009-02-10 13:56:12 -0800 (Tue, 10 Feb 2009) Log Message: Missing file from previous checkin. Modified Paths: flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/djapi_en.propertie s
-
I'm using the 3.6.10 version of firefox Mac OSX 10.5.8 the spell checker is not working correctly although all the settings needed are correct, the dictionary's installed, the Spell checking is enabled from the "Browsing" section of "General" tab und