Problème de connection avec Safari, Itunes  & You Tube

Bonsoir,
Je n'arrive pas à me connecter avec Safari, ni sur You Tube ou Itunes. Quel est le problème ? Merci

A question in english is more likely to get you responses.
My french is rusty since I took 2 years in high school, 20 year ago.
I believe you are saying you can not connect to the internet with safari, nor view youtube video?

Similar Messages

  • HT201210 Mon iphone affiche la prise et itunes sur l' ecran ?   je restaure mais il finit toujours par   iphone non retauré et erreur 21    .  COMMENT Résoudre ce problème Je pense à un problème de connection avec la batterie ?

    Mon iphone affiche la prise et itunes sur l' ecran ?   je restaure mais il finit toujours par   iphone non retauré et erreur 21    .  COMMENT Résoudre ce problème Je pense à un problème de connection avec la batterie ?

    Illustrator CC uses the Pantone Plus series, there is no CMYK definition for the spot colours in these series.
    The CMYK conversion is now based on the CMYK profile in your Color Settings.
    This is a good thing, since most of the Pantone colours cannot be accurately reproduced in CMYK, colour management provides a way to simulate the spot colours as close as possible for your combination of ink, paper and press.
    The CMYK values that were previously given by Pantone were just one way of simulating the spot colours and would give different results when another ink, paper, press combination was used.
    Sometimes the CMYK values from Pantone were completely off and you give a perfect example with the Pantone 1797 U colour.
    Printing that ink on uncoated stock would never give you such a bright saturated red as the Pantone provided CMYK values would suggest
    If you want to have a better preview of the colour, use the Overprint Preview option, that comes closer to the final printed result. The Overprint preview in CC and CS versions give s you an almost identical preview (almost because the Lab values differ slightly).
    There are ways to use the old libraries, but why should you if Pantone itself stopped giving CMYK numbers?

  • HT1430 I suddenly can.t access you tube via videos via my iPad . Tried via safari and you tube app on iPad but it says no videos and  then ask me for  you tube password . Never had to use a pass word

    I suddenly can,t access you tube videos via my iPad. Tried safari and you tube app on iPad. I get no videos  and then it asks for you tube password. Not had that before.

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Wifi connected but can not open safari or you tubes

    Hi please please help! Have got my new ipod touch for xmas and have connected it to my wireless router (the little wifi icon is showing as "on" on the screen) but when i try to connect to safari it says can not find server. I see that lots of people have had this problem but none of the answers I have seen so far work for me.
    So, when I click on to the blue triangle next to wifi do I need to go to DHCP, BootIP or Static? There automatically appears an IP address and subnet Mask under DHCP but these are not the same as my pc. Which do I use?
    Many thanks

    Hi, not sure what MAC address is? I have an IP address for the wifi but it is not the same one that comes up automatically on the ipod DHCP setting, the one on the ipod is 169.254.1.12, it has a subnet mask setting of 255.255.0.0 and that is all´. My router begins with 192. Can you advise with this? Thanks

  • Watching videos through Safari on You Tube etc

    I can't seem to watch any videos through Safari for instance on You Tube. They begin loading but never play. Please help I'm getting desperate!! And please use basic English I'm not at all technically minded, thank you!

    Just to expand on Baby Boomer's good advice:
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
    Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.)
    In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
    If you get problems with viewing video on a website try moving this file to your Desktop:
    Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
    and then restarting Safari. If all now works, you can trash that file.
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • Firefox connection good, Safari/iTunes not so

    (I tried posting this in the iTunes forum earlier and have had no luck - thought I'd try again.)
    I'm not having any difficulty accessing the internet through Firefox, but iTunes (and Safari, for that matter) don't seem to be connected. I've tried checking the proxies for both of them and nothing appears set in the wrong way. I've got a wirless (cable) connection via a Netgear router. Any ideas?
    Thanks.

    Hi Lee,
    I'm not a wireless person, but if I were in your place I would have first did what you tried, see if other internet apps worked. Then I would make a list of all the things that I might have changed that would make things suddenly stop working. Safari and iTunes worked one day and then the next they stopped...?
    I would try running software update (from the Apple Menu in the upper left hand corner) just to see what happens. 1) its another internet app to test things with, and 2) maybe there's an update in there somewhere that will resolve your problem.
    Also, if you can hook the device that's currently wireless directly into the internet connection maybe you can lean a little more. This might not have anything to do with the wireless connection. If Safari still can't connect when plugged directly into the wall, I would think that eliminates some possibilities.
    A while back, Safari used to have problems with some ISPs. You would have to enter in the DNS (domain name servers) addresses manually in some preference panel somewhere. (I mention this since it might be worth doing a search for more detailed info on this...) However, I thought this was a problem that was worked out long ago.
    Hope this helps more than it distracts!
    Good luck,
    chuck

  • Ethernet is 'connected' BUT safari says 'you are not connected'...?

    Hello, I am baffled. I am helping my Mum and Dad's to set up their new iMac. All OK bar the connection to the Internet.
    They have a new Broadband account with the ISP 'Talk Talk' (I know they are not necessariliy the best!). It is a DSL connection and I am using the 'Built in Ethernet' as the link to the Ethernet port of the SmartAX 882 Modem, as supplied by the ISP. In networking the Built in Ethernet is showing blue - "you are connected to the internet", Yet when I load Safari it does not connect and the page "your computer is not connected to the internet" comes up after a couple of minutes.
    The modem 'link' light is steady green and the LAN light shows solid amber. I have added and saved the settings in the modem many times. The ISP support folks have said that the link light should go solid amber though this does not happen. I have rebboted and reconnected all the kit many times - still no joy.
    So, any idea where the problem may be? is it the modem settings? is it the network settings?
    PS: I have tried typing in the IP adress of a web page (e.g. http://17.254.70.0.91 etc..) to check whether there is a problem with DNS server settings, though no page loads.
    Many thanks folks - any help on this would be appreciated.
    Graham
    PPS My Dad's Mac is a 17" intel iMac OS 10.4.9
    iMac G5   Mac OS X (10.3.9)  

    Hi iGraham!
    I have no familiarity with that setup, but the problem sounds similar to some who use the wrong port on the router.
    Perhaps you can find a specific answer to your problem in this forum
    edit-
    An alternative resolution to using a different router port would be to setup the Network panel of System Preferences with a LAN configuration instead of with an Ethernet configuration. After clicking on the "Assist me..." button, instead of clicking on the "Diagnostics..." button, click on the blue "Assistant..." button and then choose a LAN connection rather than ethernet. The result will be that you will end up with an entirely new "Location" rather than just another edit of your current "Location" - then to change from one "location" to another switch the "Location:" selector and hit the "Apply Now" button to avoid making unnecessary edits. Once you've switched the location and "applied" it, you'll see that your other settings are different than the ones necessary to make your original "Location" work.

  • Problème de connection avec creative cloud

    Je n'arrive plus a me connecter sur mon creative cloud même après avoir fait les étapes de dépannage....
    Quoi faire???
    merci!

    A question in english is more likely to get you responses.
    My french is rusty since I took 2 years in high school, 20 year ago.
    I believe you are saying you can not connect to the internet with safari, nor view youtube video?

  • Help cannot use safari or you tube

    have lost connection somehow.youtube says cannot play movie and safari comes up cannot connect cannot find server,it has been working fine until last week

    Which iPhone do you have? The same thing happened to me after I updated to 2.0 (I have first gen 8gig) I could not connect to server, and I had no voicemail. I took it to the Apple store and they instantly replaced my iPhone - no questions asked, I feel there may have been a bug when updating to 2.0 that affected many iPhones.

  • Safari to you tube

    tried to upload a video, many times, many days, to youtube. keep getting same message:
    Safari can’t open the page “http://v130.youtube.com/myvideospost”. The error was: “POSIX error: Is a directory” (NSPOSIXErrorDomain:21) Please choose Report Bug to Apple from the Safari menu, note the error number, and describe what you did before you saw this message.
    any ideas?

    You're welcome.
    Try the upload in Safari from another User Account.
    If you do not have a second user account established, then follow thisguidance from Apple on how to set up the account. You can ignore step 7 in the article.
    Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
    Log-on to the new account and start Safari. If the upload works in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
    Post back with results.

  • I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes

    I recently updated my IPhone to IOS 7 and now it will not connect to my iTunes.

    You updated you're phone to 7.0.6? Thats impossible since you can only update to the newest OS version Apple released which is currently 7.1.1. Unless you updated before April 22 and just now posting you're question.

  • TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

    When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' .  My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

    I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work.  i can't find an automatic update of time zones on my itouch to turn this off.

  • Je connect mon facebook avec safari et il ce deconnect immediatement

    je connect mon facebook avec safari et il ce deconnect immediatement

    See if you can restore the iPod >  iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you can't restore, try Windows diagnostics..
    iTunes for Windows: Gathering and using iTunes Diagnostics

  • My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • TS1368 I'm trying to help my sister in law with Itunes and you tube on her ipod touch.  When I press the itunes icon on the menu it says "cannot connect to the ipod store".   I've updated the latest software.  Any suggestions?

    I'm trying to help my sister in law get Itunes on her ipod touch.  When I press the itunes icon on the home page it says "cannot connect to the ipod store".  Similarly when I press the You Tube icon is says "Cannot connect to You Tube".  I'm able to access the web through safari.  Any ideas out there?  Thanks.

    Can't connect to the iTunes Store
    Try powering off and then back on the router

Maybe you are looking for

  • Input ready query is not showing loaded data in the cube

    Dear Experts, In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered thro

  • Saving to Windows Phone Documents Folder

    Greetings, I tried to look through the forum but could not find anything on saving to the Windows Phone Documents folder. From what I researched online on the Windows Phone 8 it was not possible to do this as Microsoft had blocked the ability to do t

  • Automatic Clearing Program -

    Hi All, I am trying to execute Automatic clearing program to clear some of the open items and there are some open items in vendor account. But in additinal log it is displaying like "Account blocked by Payment proposal(Table REGUS)". To complete auto

  • FM for migo against outbound delivery

    call function 'BAPI_GOODSMVT_CREATE'   exporting     goodsmvt_header             = gmhead     goodsmvt_code               = gmcode   TESTRUN                     = ' ' IMPORTING     goodsmvt_headret            = mthead   MATERIALDOCUMENT            =

  • Problem to read/write and Analyse/Regenerate Signal

    hey, i would like to do a complex platform. i have a RF signal, i would like to save it in a binary File (like TDMS file) and after that, i would like to regenerate it, but i have a problem with that. My configuration: Labview 8.5 with modulation too