Problème de réinstallation Adobe Premiere Elements 10

Suite à une panne d’ordinateur sous Windows 7-64bit, j’ai désinstallé puis réinstallé Adobe Première Elément  10 avec les DVD et les Licences  valides ,la réinstallation se déroule sans erreur, mais gros problème ,le moniteur  de prévisualisation ne fonctionne pas quand on veut lire un projet (nouveau ou ancien),Ou quand on ouvre une scène (format MTS ) ou une photo de media importé. Alors que tout fonctionné avant. ???? J’ai paramétré mes préférences dans organizer .
Tous les pilotes sont à jour , carte graphique :nvidia GeForce GTX 670 - 2 Go
processeur :Intel Core i7 3930K /carte mère :Asus P9X79 DELUXE/ mémoire vive 16Go/ disque dur : 2xPlextor PX-256M5P
quicktime player 7.7 ;Reader 11.0 ,FlashPlayer 12,0,0,43 ;Adobe air 4.0.installés

cmoijml62,
Welcome to the forum.
The PrE 10, and the nVidia G-Force video card, throw up a red flag for me.
The newest video drivers from nVidia have a big problem, that shows up in PrE 10. The "cure" has been to rollback the nVidia video driver, to a previous one. Both Adobe and nVidia are aware of this problem, but so far, nVidia does not seem to have a "fix" for their driver.
Rollback the nVidia video driver (download and install a previous version from the nVidia Web site) to a previous version, reboot and test.
Good luck,
Hunt

Similar Messages

  • Installation Adobe Premiere Elements not working

    I'm trying to install the Adobe Premiere Elements 13 but it's not working. I downloaded the file for the trial version, after downloading i also had to download something called Akamai netsession Client ? I dont know what it is, but i installed it as well. But everytime i want to open the setup it says that an error occurred. I cannot open adobe premiere elements, what should i do? i did the installation 4 times now, it's still not working

    Update:
    Bin soeben beim Installieren. Falls mal jemand das selbe Problem haben sollte... nach Installation von SP2 für Vista (dachte ich hätte das schon gehabt) und Benutzung der selben CD wie für die Installation von PSE 8 funzt es nun... Darauf muss man erstmal kommen... 2 Programme, 2 CD`s die Beide gleich aussehen... und da soll man 2 Mal die Selbe nehmen... egaaal.
    Thread könnt ihr, wenn ihr wollt schliessen.

  • Problèmes dans l'installation d'adobe Premiere Elements

    Bonjour,
    Lorsque j’essaie d’installer adobe Premiere Elements je ai le message suivant:
    " Les problèmes suivants ont été rencontrés :
    Le programme d’installation a détecté qu’un redémarrage du système est en attente. Il est recommandé de quitter le programme d’installation, de redémarrer l’ordinateur, puis de relancer l’installation ».
    J’ai fait tout ce qui est indiqué est rien à faire ! Qui peut m’aider ?

    Ce forum d'installation concerne la suite de logiciel LiveCycle.
    Je te suggère de soumettre ta question dans le forums d'Adobe Premiere à http://forums.adobe.com/community/premiere
    Jasmin

  • Problème à l'installation de Adobe Premiere Elements 7 sur windows7

    Je viens d'installer Adobe Premiere Elements 7 sur windows 7 et cela ne fonctionne pas. Il est neuf (offert il y a longtemps) et j'ai un numéro de licence valide.
    Que faire ?

    It is not surprising if software that old does not work with a modern operating system.  You should see about upgrading to the most recent release, but try before you buy.

  • Failed Updates every time!! Error message: Adobe Premiere Elements 12.1 Update Installation failed. Error Code: U44M1P7  Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7

    Adobe Premiere Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Adobe Photoshop Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Failed updates everyone on an iMac 27" running Mavericks- what can i do to get the latest updates which include support for my Sony A7 digital camera?
    [email protected]

    Update 12.1 installation errors | Photoshop Elements, Premiere Elements

  • I have a installation disc of adobe premiere elements 10

    I want to install it on my IMac iMac (21.5-inch, Late 2013), I get the following error and warning messages:
    Exit Code: 7
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ... WARNING: DW016, DW036 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 7 error(s), 7 warning(s)
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 as it is already upgraded by the payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPackde_DE: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Smartsound2: Install failed
    I do not find any solution under Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
    What can I do?
    If I install the latest version 13, I can not use my serial number and I get only the trial version I do not want to use because you have a kind of watermark in the movie you create.
    Any help please?

    create a desktop folder and copy your installation files to that folder.  then click setup in that desktop directory.

  • Installation of Adobe Premiere Elements 10

    I got a pop up warning during intallation of Adobe Premiere Elements 10 that says This installation package is not supported by this processor type contact your product vendor

    Hi,
    It seems like you are trying to install a wrong package. There are different versions for 64 bit and 32 bit versions of operating system. Can you let us know which Operating system are you working on so that we can suggest a correct version.
    Regards,
    Anushree

  • Adobe Premiere Elements does not open after installation

    Hello,
    I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
    I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
    However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
    I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
    I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
    I hope you can help me out!
    Thanks!
    Inge

    Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
    The Photoshop Elements worked.
    I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
    thanks
    Inge

  • How do I re-install adobe premiere elements on the same computer? Original installation had error -

    How do I re-install adobe premiere elements 11 on the same computer. Original installation had error - missing dll file.

    What computer? What exact error? Details are everything...
    Mylenium

  • Installation of Adobe Premiere Elements 12 always fails

    During the installation of my Adobe Premiere Elements 12, I always receive an error message (during the processing of linked components) which says:" During the installation an error has occured."
    I have purchased Adobe Premiere Elements online and use the appropriate key provided by the retailer.
    My Adobe Premiere Elements 10 works fine though but I would rather like to get my new program going.
    I have tried all Adobe error correction proposels already but unfortunately in vain.
    Any suggestions how to proceed?

    Thanks for your fast reply. I have already solved the problem and everything works fine.
    Von: kglad [email protected]
    Gesendet: Donnerstag, 28. November 2013 15:48
    An: Weblogger
    Betreff: Installation of Adobe Premiere Elements 12 always fails
    Re: Installation of Adobe Premiere Elements 12 always fails
    created by kglad <http://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5882899#5882899

  • Adobe Premiere Elements installation fails

    I get the following error when installing Adobe Premiere Elements:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 8 error(s), 7 warning(s)
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
    ----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Smartsound3: Install failed
    ERROR: DW050:  - Photoshop Camera Raw for Elements 10: Install failed
    ERROR: DW050:  - Smartsound1: Install failed
    ERROR: DW050:  - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Premiere Elements 10_LangPacken_US: Install failed
    ERROR: DW050:  - Smartsound2: Install failed

    Can you follow the steps in below mentioned article :-
    http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

  • While installing Adobe Premiere Elements 10 for Mac my installation encountered errors.

    While installing Adobe Premiere Elements 10 for Mac my installation encountered errors. Got about 42% and then crashed with an Exit error Code 7.
    The summary says:
    DW036: Payload cannot be installed due to dependent operation failure.
    I have screengrabs:

    This is the correct forum http://forums.adobe.com/community/premiere_elements
    And, some information to help with install problems
    http://www.adobe.com/support/contact
    In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7
    and
    New forum for Download & Install & Setup problems
    http://forums.adobe.com/community/download_install_setup
    Chat http://www.adobe.com/support/download-install/supportinfo/
    When you get to the correct forum, provide more information about your computer
    These questions below may be for a different product... but the information you need to supply is the same, for the products you use
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406

  • Im trying to install Adobe Premiere Elements on Window 8.  The Windows Installer is not working.. some window pops up with an error message and it does not install

    I get the following window pop up after trying to install Adobe Premiere Elements.  After it prompts me to select the language i get this:

    I think I figued it out... But why installations instructions didn't come up when I inserted the disk was very annoying. And because they didn't, Adobe should post th installations instructions somewhere on their support site. Not here now, which is also annoying. 

  • I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time?

    I just purchased adobe premiere elements 12 and at the end of the installation it mentioned to go to apple . com and get quick time? I'm interested in doing time lapse video. Not sure as what to do... Any and All help would be Greatly Appreciated, Thanks, in advance.

    EuGene
    What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update? If not, please do so using an opened project's Help Menu/Update.
    The latest version of QuickTime is a requirement for Premiere Elements. Among other things, without it you will not have QuickTime export presets when you get to the Publish+Share/Computer/QuickTime exports. So, please download and install latest version of QuickTime to computer with Premiere Elements 12/12.1. QuickTime like Premiere Elements requires that it be run with you as Administrator. Is your User Account one with Administrative Privileges?
    Apple - QuickTime - Download
    Some reading material if your interest is in Premiere Elements and Time Lapse video
    http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
    ATR Premiere Elements Troubleshooting: PE: Numbered Stills in Time Lapse and Other Animations
    Please update us on your progress when you get a chance. Any questions or need clarification, please do not
    hesitate to ask.
    ATR

  • Adobe Premieres Elements 10, problème d'importation

    Dans Adobe Premieres Elements 10, je ne parviens pas à importer le format 16-9 malgré le paramétrage à cet effet. L'image obtenue est toujours en 4-3 et le moniteur en 16-9. Au déplacement, du clip video vers le moniteur, celui-ci bascule en 4-3. Ma caméra video est une JVC Everio GZ-MG 630RU.    Solution?

    Merci pour la réponse. En effet, la méthode suggérée m'a permis de réaliser les ajustements nécessaires. Votre  aide  a été grandement appréciée.
    Rmag
    Envoyé de mon iPad
    Le 2014-05-24 à 15:41, "A.T. Romano" <[email protected]> a écrit :
    Adobe Premieres Elements 10, problème d'importation
    created by A.T. Romano in Premiere Elements - View the full discussion
    rmag
    I suspect that your JVC is recording .mod widescreen. And, this is the classical story of the file's 16:9 flag missing or not recognized by Premiere Elements (any version).
    Set your Premiere Elements 10 project preset in the new project dialog to PAL DV Widescreen and import your .mod widescreen into the project using Premiere Elements 10 Get Media/Files and Folders. In Project Media, right click the thumbnail of the file, select Interpret Footage. In the Interpret Footage dialog, go to the Pixel Aspect Ratio section and dot the Conform to: Then change the Conform to field to
    DV/DV PAL Widescreen 16:9 (1.4587).
    If there are any black borders in the Edit area monitor image after that, click on the monitor to bring up the image's bounding box. Then drag on a bounding box handle to scale the video image to just fit the space in the monitor to no black edges.
    The 16:9 flag issue is one part of the JVC .mod matters. If you have problems importing the file, rename the .mod file extension to .mpg before import into Premiere Elements.
    Please review and consider and then let us know the outcome.
    Thank you.
    ATR
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6406840#6406840
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for