Probleme for writting in to the file
Hello, I have a problem in my applicaion and I need your help.
My problem is the following:
I have a vi Entrées Consignes1.vi, when I run this vi, It open the file for exemple : FAUX.txt (which contain the expression like name = value),after the opening, the differents values display in my Entrées Consignes1.vi. up until then , that's ok!!
But my problem is when I modify some values in my panel control and when I click to the button" Modifier Données" I' d like save it in the same file without affect the different name.I'd like just modify the values because in my solution,I don't know what make?
I send you the Entrées Consignes1.vi with the file FAUX.txt
Thanks you very much for your help.
My seconds question is what exactly is the difference of Labview and Labview Real time?
Attachments:
Dossier.zip 31 KB
Pardon, j'ai oblier l'attachment.
- tbob
Inventor of the WORM Global
Attachments:
Entrées Consignes1.vi 101 KB
Similar Messages
-
I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.
I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage. -
Hi
I have been using Mac's now for about 10 years and this is my first problem.
I have recently moved into an office that use PC's with a Windows server.
I have set up the network to transfer files and view the windows server and it works fine.
I have a problem in that my colleagues on PC need to be able to view my emails which I send and receive using Mail. They therefore need to have logical title names and the date sent and ideally who to or from. I view them and archive them using Mail which is fine for me.
I understand about the archiving and copying of mailboxes but this gives every email the un-fathomable title name 9944847 etc.
I can get round the problem by dragging and dropping every email I send and receive individually and it will automatically give it a more logical title of the subject heading however the date is when it was dragged not when sent. This is a pain if I am away or forget to save an email for a day or two and then the date is inconsistent.
Is there a way to batch copy emails from Mail to a finder window and for it to name the files as the subject heading or to archive the files in a similar way so they retain the detailed information my colleagues require.
And no I can not get to all change to Mac and I don't really fancy using Outlook, Entourage or Parallels.
Please help.
TobyQuit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in. -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Steady Stream of "Searching for movie data in the file..." Error Messages
My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
Once in a while, iMovie will ask for a different movie file, with the same problem.
Any ideas?I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past? -
Mozilla asks me if I want to compact, I click 'yes' and after a while I get this:
Alert
The folder 'inbox' could not be compacted because writing to folder failed.Verify that you have enough disc space, and that you have write privileges to the file system, then try again.
I have no idea what to do know. Please can someone help me?Try restarting your computer in windows safe mode. Links to Instructions here http://thunderbirdtweaks.blogspot.com.au/2014/02/basic-troubleshooting-for-thunderbird.html
See if compacting will work them -
Trying to download iTunes 10.7 in Windows 7 64-bit. When I click the download now button, it immediately goes to the "Thank you for downloading" screen, but the file has not downloaded. Popups unblocked. Any thoughts? Thanks!
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.
The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.
-
Where is saved the Preference for "Write XMP IDs to Files on Import"?
Hello,
In a Jsx, I test if the "CreateLayerMarkersFromFootageXMP" is activated in the AE preferences with:
app.preferences.getPrefAsBool( "Metadata", "CreateLayerMarkersFromFootageXMP" );
But I cannot do the same for this one:
"Write XMP IDs to Files on Import", which is also in the Preference Panel, but not saved in the Preference files I think.
Or if it's saved in, where? And how can I check it in ExtendedScript?
Thanks.It appears that the Metadata section only carries that one pref it seems.
["Metadata"]
"CreateLayerMarkersFromFootageXMP" = 01
The only other XMP prefs I've found in the AE CC files are:
"Adobe After Effects 12.1 Prefs.txt"
["Metadata"]
"Strip project XMP history from rendered output" = 00
"Strip project XMP history from saved projects" = 00
["XMP Writing"]
"Maximum retries" = "5"
"Seconds between retries" = "1.000000"
"Adobe After Effects 12.1 Prefs-indep-general.txt"
["Metadata"]
"CreateLayerMarkersFromFootageXMP" = 01 -
I have re- installed Firefox on 3 occasions recently; mainly in the hope of resolving problem with constant crashes. Yesterday, 22 August, I installed Firefox again to be met with the sqlite.dll3 problem. Ihave uninstaaled and re-installed (from the website) and am still getting the same message.
This procedure might work or might not work:
Download the free Ccleaner and repair your Registry (repeat until clear)
http://www.piriform.com/ccleaner/download/standard
Uninstall iTunes according to Apple's directions here
http://support.apple.com/kb/HT1925
Use Ccleaner and repair your Registry again just in case.
Then download/install iTunes again from the Apple website
http://www.apple.com/itunes/
Your iTunes content will not be removed,
Please regularly backup your iTunes content to external medium (hard drive, cd/dvd's) using the File>Backup Library in iTunes. Apple will not reissue new copies of content.
(Notice: this post is a copy/paste in a hope that a uninstall/reinstall and repair of your Registry may solve your particular issue, Windows issues are particular difficult to resolve due to multiple factors, so my advice is to be taken into advisement with others recommendations which may be more specific or experienced in resolving your issue. If it or others recommendations solve your issue, please respond back with a "Correct" or "Helpful" or not resolved responses so we can further refine our efforts in trying to successfully assist others. I receive no compensation for product mention.) -
I have windows 7 on a desktop. I had firefox before which worked fine then I attached a router to my computer that may have been defective and may have damaged the computer. I took the router off. Firefox suddenly reverted back to the start up page of when you are new to firefox, e.g. here's how it works, and stopped loading my normal home page. Even though I entered the tabs I wanted for my startup home page every time I shut down my computer it went back to the beginning thinking I had only just loaded it. I did lots of system diagnostics but nothing appeared to be wrong with my computer so I uninstalled Firefox, restarted, then downloaded it again. When I download it, it says run or save and I choose run. Then it extracts the file and a message comes up that says "7-Zip. Cannot find file. Then nothing more happens. No files are downloaded to my computer and it's as though I never tried to download it.
SAVE the installer to your hard drive (do not use the "Run" option); save it to your Desktop so that you can find it. When the download is complete, close whatever browser you have open, click or double-click the file you downloaded and see if it installs without a problem.
The downloader is a self-extracting archive and should not need or use 7-zip. I have 7-zip installed on my system and it does not interfere with nor is it used in the Firefox install process. Hopefully, you have not set the downloading of .exe files to be associated with 7-zip.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Scheduling Problem for uploading Data from Flat file to SAP
Hi guys,
I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
This folder lies in the \usr folder of SAP Production.
I have kept all the Flat files in the shared path "
Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
To give u exact directory structure..
Tis-mum-iz-s1 is the Server Name
usr is the SAP System folder used for uploads and downloads
usr |
...-> Migration |
-> SAP-INT |
-> leave -> (Flat Files)
Migration folder is shared with all rights.
Obviously, we cannot give shared drive as the variant in the scheduler.
So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
All my other download programs are working fine with this path as a variant...
But my this particular upload program does not work with this path....
I am giving u my code...
TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
REPORT : ZMIGRATE_ZLEAVE
DESCRIPTION : To Upload the Leave data. (ZLEAVE)
CREATED BY : Abhishek Bachhawat
CREATED ON : 01.09.2005
CONSULTANT : ANAND
REPORT ZMIGRATE_ZLEAVE.
TABLES: ZLEAVE.
data: begin of wtab,
MANDT(3),
ZLVID(8),
PERNR(8),
ZSTDT(8),
ZENDT(8),
ZDAYS(4),
AEDAT(8),
ERDAT(8),
end of wtab,
itab like WTAB occurs 0 WITH HEADER LINE.
data: temp like zleave occurs 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK file
WITH FRAME TITLE text-005.
parameters: file like rlgrap-filename Obligatory.
Concatenate File SY-DATUM '_Leave.txt' into File.
SELECTION-SCREEN END OF BLOCK file.
at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
CALL FUNCTION 'WS_FILENAME_GET'
IMPORTING
FILENAME = file.
IF SY-SUBRC <> 0.
ENDIF.
start-of-selection.
if file ne space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = ITAB.
else.
message e000(zps) with 'Specify a file'.
endif.
SORT ITAB BY ZLVID.
LOOP AT ITAB.
REFRESH TEMP.
CLEAR TEMP.
TEMP-MANDT = sy-mandt.
TEMP-ERDAT = SY-DATUM.
TEMP-ZLVID = ITAB-ZLVID.
TEMP-PERNR = ITAB-PERNR.
TEMP-ZSTDT = ITAB-ZSTDT.
TEMP-ZENDT = ITAB-ZENDT.
TEMP-ZDAYS = ITAB-ZDAYS.
TEMP-AEDAT = ITAB-AEDAT.
TEMP-ERDAT = ITAB-ERDAT.
APPEND TEMP.
SELECT SINGLE *
FROM ZLEAVE
WHERE ZLVID = TEMP-ZLVID
AND PERNR = TEMP-PERNR.
IF SY-SUBRC = 0.
UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
ZENDT = TEMP-ZENDT
ZDAYS = TEMP-ZDAYS
AEDAT = TEMP-AEDAT
ERDAT = TEMP-ERDAT
WHERE ZLVID = TEMP-ZLVID
AND PERNR = TEMP-PERNR.
ELSE.
INSERT ZLEAVE FROM TABLE TEMP.
COMMIT WORK.
ENDIF.
ENDLOOP.Hi,
open dataset file for input in text mode.
check sy-subrc = 0.
while sy-subrc = 0.
read dataset file into wa.
if sy-subrc = 0.
append wa to itab.
else.
exit.
endif.
endwhile.
close dataset file.
regards
Siggi
PS: check also the F1-help for open, read and close statements! -
OSB file Write, not naming the file with specific name.
Hi ALL,
I have a requirement, i should accept the data or XML file from from JMs queue and place it in a location specified. For this i have build the PS and BS.
Where PS will De-queue the JMS queue and route using Service call out to BS. And the BS will place the file in location. I could do this easily. BUT the thing is that i could not name the file perfectly with the intended file name. to build the BS i used .JCA file , .WSDL file, XML file from Jdeveloper. and imported to osb console. i could write the file as follows..
MY business Services:
services TYPE : ANY XML services
transport
Protocol ==> file
Load Balancing Algorithm ==> round-robin
Endpoint URI ==> file:///oracle/Middleware/user_projects/domains/Agile
Request encoding ==> utf-8
this is the file name i am getting:
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<file:filePath xmlns:file="http://www.bea.com/wli/sb/transports/file">
/oracle/Middleware/user_projects/domains/Agile/POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml
</file:filePath>
</con:metadata>
the file NAME : POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml ( POTest is prefix and .xml is Sufix)
3338620552690675292--411054fa.1363686ca89.3e8d i dont know y the this garbage file name is created...
please give suggestions to avoid garbage name
thanks --
ANILHi ALL,
I have a requirement, i should accept the data or XML file from from JMs queue and place it in a location specified. For this i have build the PS and BS.
Where PS will De-queue the JMS queue and route using Service call out to BS. And the BS will place the file in location. I could do this easily. BUT the thing is that i could not name the file perfectly with the intended file name. to build the BS i used .JCA file , .WSDL file, XML file from Jdeveloper. and imported to osb console. i could write the file as follows..
MY proxy services:
services type : any XML services
protocol :jms
MY business Services:
services TYPE : ANY XML services
transport
Protocol ==> file
Load Balancing Algorithm ==> round-robin
Endpoint URI ==> file:///oracle/Middleware/user_projects/domains/Agile
Request encoding ==> utf-8
this is the file name i am getting:
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<file:filePath xmlns:file="http://www.bea.com/wli/sb/transports/file">
/oracle/Middleware/user_projects/domains/Agile/POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml
</file:filePath>
</con:metadata>
the file NAME : POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml ( POTest is prefix and .xml is Sufix)
3338620552690675292--411054fa.1363686ca89.3e8d i dont know y the this garbage file name is created...
i am getting this error when i process test from proxy services then i may use route and change it as Use Routing Options on the Service Callout and override the header (jca.file.FileName).
but the thing is when i test from Business services also i am getting the same garbage name on both window and linux.
please give suggestions to avoid garbage name
thanks --
ANIL -
How to write content of the file under folder
Hi Experts,
I have following scenario, I have list of files under folder in local desktop(for eg D:\mani)
I have only filename, using this filename i want to search and get content of the particular file and write in some other location? how to do that? give your suggestions?
Regards,
P.ManivannanYou could go two ways here:
The first possibility requires that (a) you know what operating system you are working with, and (b) you only need to copy the file, and not do anything else with the contents of it. In this case, probably the easiest way to do this is to use a Runtime exec command for the file you want to copy:
java.lang.Runtime.getRuntime().exec( "cp D:\mani D:\mani2" );Otherwise, if you need your code to be portable, you can't assume anything about the operating system. Since java.io.File doesn't provide a copy method, you will need to read the entire contents of the file into the vm, and then write them out to a new file. Also, if you need to use the contents of your file in some other way, as well, then you also need to read the entire contents into the vm. In this second case, how you read the file may depend on what kind of data the file contains.
In general, the following code should work for you:
final FileInputSteam fis = new FileInputStream ( new File( "D:\mani" ) );
final FileOutputStream fos = new FileOutputStream( new File( "D:\mani2" ) );
final byte [] buf = new byte[ 1024 ];
int bytesRead;
while ( ( bytesRead = fis.read( buf ) ) != 0 )
fos.write( buf, 0, bytesRead );Don't forget to catch or throw IOException.
Hope this helps.
- Adam -
Has anyone had a problem with memory cards switching the file from EOS to EKS?
My camera memory cards have suddenly switched from an EOS file to an EKS file and are no longer readable. I don't know if the problem is my computer, my card reader, my memory cards, or my camera. It doesn't seem probable that two cards would become corrupted or go bad at the same time. I have two large capacity cards and two new high capacity cards that I haven't tried yet, but I'm afraid to try to use any of my other cards until I know what is going on with these two. The camera I'm using a 5D Mark II. Can anyone please help! This is a serious problem for me!
Thank you to everyone for your help and assistance!
Best regards,
WindsailsLightroom should recognize your camera (assume it's LR3 or later) automatically without pointing it to the DCIM directory. The files you are referring to is system file I think and not the photos; thus OS cannot read the file.
Do you have a card reader? For some reason, if you connect your camera into Lightroom directly, sometimes LR doesn't show the preview of your images. Instead you'll get ? next to a gray box. If you don't have a card reader, just plug your camera in, ignore the ? and the gray box (this is LR problem, not your camera), then import them anyway. You should see your test shot once it's done importing.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide
Maybe you are looking for
-
Download older version of a file from SharePoint Document Library using CSOM and 404 error
Hi, I am trying to download previous versions including Major and Minor versions of documents from SharePoint Online using CSOM. I get 404 error when I try to download the file. I found several posts on various discussion forums where people are gett
-
Hey, I have an Apple Remote and I would like to use it with Spotify. I know it works, but I'm experiencing one problem with the play/pause button. When I push this, iTunes is automatically launched. Is there a solution to prevent iTunes from being la
-
My ipod nano 6 will only play one or two songs then I have to force the next song to play. It will then start several songs before settling on one. This just started and I havent changed anything. How to I make it go back to playing songs continuousl
-
All of a sudden when I burn a dvd in idvd the motion menu fails to encode and burn. It is there in the preview mode and I see it encoding but when I place the finished dvd in a player there is no motion background. my movies will play but the menu is
-
IMovie - corruption with external disk
I used a Canon HD30. I plugged firewire from the camera to the G5, put the tape in the video camera, launched iMovie, created a new project and selected the external hard drive as always so the hard drive doesn't run out of space. I movie recognized