Problème Image Noir / Black Screen

Bonsoir, j'essaye la version d'essai de photoshop CC, j'ai plus l'utiliser deux, trois fois, mais là, quand j'ouvre une image, celle-ci devient noir alors que la miniature affiche bien la photo normale. J'ai déjà essayé d'aller dans Edition / Préférences / et de désactiver " open GL " et de remettre en normal mais cela n'a rien changé, c'est toujours pareil. Je suis sur un ordinateur portable MSI, avec une AMD Radeon HD 7970M. J'aimerais bien résoudre ce problème au plus vite afin de tester cette version d'essai pour peut être l'acheter plus tard, mais bon, pour le moment c'est plutôt mal parti ...
Donc, toute aide est bonne à prendre.
Cordialement, salutations.
Hello, i'm trying the trial version and i have a problem, when i open a picture, it appears in black and the miniature appear normal ( it's the picture i have open ). I have trying to change the Performance and the open GL but anything make it, the picture stay in black. I'm on a laptop computeur and i have a HD Radeon 7970M and it's an MSI.
Please, can ou help me, because i whish to take adventage of the trial version to buy it later.
Thanks a lot, Good Bye !

Hello
Try to reboot (sometimes works miracles ).
Update to the latest graphic driver: http://www.amd.com/fr/Pages/AMDHomePage.aspx.
Does your system meet the requirements: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html#Photo shop%20CC%20system%20requirements
Photoshop CC system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2 GHz or faster)
Microsoft® Windows® 7 with Service Pack 1 or Windows 8
1 GB of RAM
2.5 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with OpenGL® 2.0, 16-bit color, and 512 MB of VRAM (1 GB recommended)*
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.†
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7 or v10.8
1 GB of RAM
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024 x 768 display (1280 x 800 recommended) with OpenGL 2.0, 16-bit color, and 512 MB of VRAM (1 GB recommended)*
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.

Similar Messages

Image capturing black screen

I connected a usb to labview using the IMAQdx. At first, it would run but would produce timeout errors after 5 pictures. Now, I manage to get the cycle to run 50 times but the image only comes out as a black screen. What could be the cause of this and how can I fix this?
Solved!
Go to Solution.

Thank you for your reply. Attached are two attempts that both produce the timeout error
Attachments:
PIV1.png ‏114 KB
PIV2.png ‏111 KB

Audio but NO images show - black screen -up in the canvas viewer window????

Hi all,
I'm a newbie having problems with a file in FCP where the audio plays and but no image shows up in the Canvas window. I imported the audio from my camera and had some kind of a problem in the browser window where the sequence didn't show up with the actual length of time...it read 00:00:00. I reimported the quicktime file into FCP Express, and then it showed up fine. When I reopened it in FC Pro, this time, the sequence shows the full amount of time of the file, but I'm still getting all black in the canvas window. I'm at a loss to explain this. I have a feeling I did something wrong during the initial import, and so the actual source file is somehow corrupted. But when I open the source file in quicktime, it plays fine. It's only within FCP that it's all dark.
Help!!!!!
Thanks in advance
Message was edited by: Gary King3

sounds like you do not have a source file that FCP recognizes.
What camera and what codec does it shoot? did you convert to a prores or standard QT format before or after ingesting?
bogiesan

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

I cannot view images in iphoto - only black screen

I had problems being unable to boot my iMac this week and ended up having to take it to the Apple store where they re-installed the operating system and all seemed fine. Now however, although I can view thumbnails in iPhoto, when I click on them I just get a black screen.
I've checked the images do still exist in the file folders and I had a slideshow running as a screensaver - this still shows the images but I cannot access them through iPhoto.
Can anyone help?
Thank you

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

No image when embedding a video/movie into my PDF file,just a black screen?

I cannot embed videos with an image on my computer into my Acrobat Pro 8 file. I get only a black screen, which I must click on to play the video. How do I import the visual image along with an arrow for playing or a navigation bar at the bottom for play/pause?

If you're creating video content in Acrobat 8 then it's "legacy media", which has a different structure to the Rich Media Annotations created by Acrobat 9 and later. RMAs use Flash Player and there are inbuilt choices for the play control buttons when you create a new annotation, but legacy media hands over control of the video rendering to whatever external application it can find installed on your computer, so what you see will vary.
The poster frame for a video can be controlled when the annotation is created - either sampled from the video or selected manually from an image file.

I want image instead of black screen when video ends.

Hi guys,
I am wondering how you place an image at the end of a VC video. I tried placing several images at the end of a recording but it always ends with a black screen when it is produced. Here is the video I am working on and I want the last text you see to stay on screen instead of the black screen.
Thanks Gary Garnett

Gary and all,
See response here for your question:
http://groups.google.com/group/TeachMeVC/browse_thread/thread/d557f284b35e911c#
And consider joining our Disussion Group for VC users at http://www.TeachMeVC.com

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I want images instead of black screen on VC video.

Hi,
I made a video with VC but I want an image instead of a black screen when it is producd. I tried ending my production with various images but when it is produced there is always a black screen. Any help would be appreciated. Here is my video I am working on- http://www.computertuneupvideos.com
Thanks
Gary Garnett

Gary and all,
See response here for your question:
http://groups.google.com/group/TeachMeVC/browse_thread/thread/d557f284b35e911c#
And consider joining our Disussion Group for VC users at http://www.TeachMeVC.com

Help! Image Capture scanning detected images solid black! Screen cap inside.

I know this is not a forum for Image Capture, but there is no dedicated forum for it, and I figure there are smarter people here with regards to images.
Image Capture is scanning ~some~ detected images solid black. It presents an overview scan just fine, but than the final files are black.
Here is a screen capture:

iPhoto earlier than iPhoto 9 (11) does not support Grayscale because it adds a color profile name Dot Gain 20%. This profile is not compatible with iPhoto. You can either rescan those photos as color photos or change the profile to sRGB or RGB.
I've created an Automator workflow application, Convert to JPG and Embed sRGB profile, that will convert B/W files to a jpg file with the sRGB profile. However, is doing so it adds an additional jpeg compression level to the file resulting is a smaller file size but not a smaller image size. You can download it from Toad's Cellar.
The conversion will have to be done on the photos outside of iPhoto before they are imported. So you will have to export the original files to a folder on the Desktop, run the application on them and then reimport the new files.
OT

When I select an image, why do I see a grey warning triangle and black screen?

When I select an image, why do I see a grey warning triangle on a black screen? I can see the image in the Event review, but it won't let me see it independently.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Windows Server 2012r2 WDS capture image hangs at black screen

Ok so i upgraded my server to 2012r2 and i am using the boot.wim from windows8.1 pro iso. I create a deploy image and it boots up on my fujitsu stylistic machine. It also boots on my lenovo thinkpad yoga.
I go and create a capture image and at first fails so i added the usb3.0 lenovo dongle driver. It then shows me the windows logo and just hangs at black screen. I have downloaded the entire sccm driver package off lenovo site and nothing has
helped. It also does not load on the fujitsu machine either.
I have been going nuts any help is much appreciated
thanks
Dave

Hello,
Where did you get the original image? If you download it from MSDN or technet, can you provide the link?
And is update 1 integrated with the original image or you install it manually after installation?
In order to address the issue, we need collect some more informaiton.
Thank you.

Black screen, can vaguely see image

About 2 years ago applecare replaced my lcd screen (actually the neck and everything)
I can't BELIEVE the inverter is gone....
is there some other thing it could be?
I booted from an external hard drive last night, ran disc utility ,
rebooted back to main drive. The computer was fine.
I woke up this morning....black screen!
boooohoooooo:(
thanks
laura

Hey Laura,
I booted from an external hard drive last night, ran disc utility ,
rebooted back to main drive. The computer was fine.
I woke up this morning....black screen!
So this morning was that booting from the internal drive?
If not that could be like #2 below.
This is from the Service Manual:
"Screen is dark, fan is running and the hard drive is spinning. You may hear the startup chime as well.
1. Reset parameter RAM. Press Command-Option-P-R during startup before “Welcome to Macintosh” appears.
2. The system software could be damaged. Start up from the system CD that came with the computer.
3. Remove the user access panel on the bottom of the computer. With the unit powered on, check if a red LED is visible in the access door. If the red LED is on, power is on. If you don’t see the LED glowing red, follow the steps under the symptom “No Power”.
4. Disconnect the A/C power cord. Place the unit in the service stand and remove the user access plate.
Press the PMU reset button on the logic board. Refer to “Resetting the PMU on the Logic Board” mentioned earlier in this chapter.
5. Check for external video. Connect an external monitor to the mini-VGA port. If you don’t have external video, replace the main logic board. If you do have external video, go on to the next step.
6. Open the bottom housing and verify that all the cables are securely attached. Pay special attention to the video cable (located near the modem). If the cables are securely attached, go on to the next step.
Warning: Whenever the bottom housing is opened for service, you must do two things:
• You must clean the original thermal film from the surfaces joining the thermal interface layer and
reapply thermal paste to the thermal pipe.
• The bottom housing has four torx screws that must be tightened to at least 17 in.-lbs. If you do not
have a torque driver, you will have to make sure these screws are tightened by hand FIRMLY, BUT
NOT FORCIBLY. Or, purchase the service tool (076-0899) in order to ensure the thermal pipe is
firmly mated with the top base. If the bottom housing is not securely attached to the base in this
fashion, the CPU may overheat and become damaged.
7. Check the connection of the video cable to the LCD flat panel display (under black tape).
8. Replace the inverter board.
9. Replace the LCD display. Important: If you are replacing the display, be sure to install the new display
shield and EMI gaskets that come with the new LCD panel. Installation instructions are included with
the new display panel. Additional display shields/gasket kits are also available separately as a kit, part
#076-0958.
10. Replace the neck assembly
11. Replace the logic board.
12. Replace the power supply board."
So my money is on the PMU, inverter cable, inverter board or that connection on the back of the display.
Richard
Message was edited by: spudnuty
null
Message was edited by: spudnuty

IPhoto 09 - Black screen after download of new images

Hoping someone can help me with this problem.
After downloading new images from my digital camera (Canon EOS 400D) I am unable to open any images in iPhoto, either the new ones or older ones (which I have opened previously.) I can see the thumbnails but when I click them all I see in the iPhoto image pane is black. No image, just blackness.
If I quit iPhoto then restart it I am able to open all the images old and new as before without any problem. This is not a terminal problem but it is very annoying. Any helpful ideas would be greatly appreciated. Thanking you in anticipation.
Regards,
Rikx

Control-click on one of the problem thumbnails and select Show File. If you are taken to a folder with the original image file in it then they are safely in the library. In that case Backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the first two and last three options.
Click to view full size

Black screen on iPad only showing a image of a charging lead and iTunes logo

I have recently upgraded the software on my iPad second generation and now it's totally unresponsive . There is a black screen showing a lead needing to be connected to iTunes. I have tried a reset but nothing and it won't switch off or on. Any suggestions please?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Problème Image Noir / Black Screen

Similar Messages

Maybe you are looking for