Probleme mesure avec module 9205

Bonjour
une question sur un module compact daq 9205, je fais l'acquisition en tension d'un signal qui varie entre 0 et 50mV, la mesure se fait normalement avec un petit probleme.
la source de tension est stable ( par ex: 10mV) et lorsque je fais l'acquisition mon signal fluctue je dirai meme qu'elle est pertubée avec des pics de tension
est ce que mon module peut mesurer des tension aussi faible ? ou alors savez vous d'ou peut venir mon problème
merci

I'm not someone who posts new questions very often. I'm usually just replying to existing threads. And if I was starting a new thread, it is unlikely that I'd be going to one of those threads that seem to be missing from the drop down.
I agree the extra step of searching is kind of a nuisance. Though, I see the point of it by trying to force people to search for an answer before actually posting the question. Imagine how many more "how do I write my data to Excel" questions we'd be seeing then?
I agree the drop down needs to be fixed. I wonder how long it has been malfunctioning? It seems like it must have been a while. But I really suspect very few people actually use that dropdown, otherwise we probably would have heard of the issue before now and not with just the 2 or so recent threads that seem to mention it.
The broken dropdown/dialog box shouldn't be causing anybody to post in the wrong thread. Those threads that seem to be missing from the dropdown (an thus under the broken More? category) still have quite a few new threads being posted.

Similar Messages

Parasite avec module 9205

Bonjour
je possede un compact daq avec un module 9205, je fais l'acquisition d'une tension de 10mV, le probleme que lorsque je fais l'acquisition de mon signal je me retrouve avec des pics de tension alors que ma tension d'entrée est propre
en gamme d'entrée j'ai mis +-200mV, j'aimerai savoir si vous avez deja rencontré ce problème ou si la carte ne me permet de mesure aussi faible
merci

Duplicate
Samuel G. | Application Engineer Team Leader
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Probleme mesure avec SCXI

On a un souci avec deux mesure à effectuer par l'ensemble (châssis SCXI1000 + un module 1125,+2*1104
+un module 1102)
La première :
Il s'agit de mesurer la tension différentielle U2 (voir image jointe) qui est de l'ordre de 190V DC; Le 1125 nous donne une fausse valeur
509V. On ne comprend pas pourquoi l'1125 ne mesure pas cette valeur alors qu'on a essayé avec une DMM 4065 et un multimetre agilent
ça a donné un bon résultat
La deuxième:
Il s'agit de mesurer une tension différentielle aux bornes du capteur LEM CT04(voir datasheet ci-joint pour plus d'info) qui est
de l'ordre de 0.82 V AC Le module 1104 n'a pas pu mesurer cette valeur contrairement à la DMM4065 et le multimetre agilent.
Ma question pourquoi on a pas pu mesurer ces deux valeurs ? Est ce que la méthode de calcul et intégration des valeurs efficaces procédés
par la DMM n'est pas la même que celle du 1125 et 1104?
Merci de me répondre c'est trés urgent
Pièces jointes :
ct_e.pdf ‏974 KB
schema mes1.PNG ‏9 KB

Bonjour,
Pour la mesure avec le 1125, pourriez-vous nous indiquer les branchements que vous avez faits entre la carte SCXI et votre circuit électronique?
Pour la mesure avec le 1104, je crains que ce dernier ne soit pas fait pour mesurer des tensions variables, en effet, il possède un filtre passe-bas à 2Hz, cela pourrait expliquer que vous n'ayez pas réussi à mesurer une tension AC.
Cordialement,
Olivier L. | Certified LabVIEW Developer

Problem with develop module

I have LR 5.4 running on a mac OS 10.7.5. I am having problems with the software locking up in the Develop module. Sometimes a new image won't open and the preview screen stays black. I go back to the Library module and try to reneter the Develop module and get an error message saying there was an error trying to open the module. The entire LR screen is gray. I have to quit LR and restart the software to continue. I downloaded my software from Abobe and I was wondering if I can download a new version again and use my same serial number to reinstall the software.

Hi Rodney,
No custom print templates and this is a relatively new problem. It just
started about a week ago. I have been using the software steady for months
now. It did it once or twice last week but this weekend and today it has done
it about six times so it seems the problem is getting worse. That¹s why I
think the software may have been corrupted. I didn¹t keep a copy of the
software I downloaded so I can¹t reinstall. That¹s why I was wondering if I
could download it again and use the same serial number as before. I have only
loaded the latest version on my desktop. I also have LR 4 still installed on
my laptop and desktop. I have a big project to complete and this is really
slowing me down.
Michael
Problem with develop module
created by Andrew Rodney <https://forums.adobe.com/people/thedigitaldog> in
Photoshop Lightroom - View the full discussion
<https://forums.adobe.com/message/6445126#6445126>
Do you have any custom print templates? That might be the case, it was an
issue at one time. Delete them and try using one of the default presets.
Crash?
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6445126#6445126 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Lightroom by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3316> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

Bug de répétition de mesure avec un oscilloscope Tektronix MSO 2024

Bonjour,
Je dois acquérir un grand nombre de mesures avec un oscilloscope Tektronix MSO 2024, mais lorsque je répète mes mesures (par une boucle for dans mon programme de base) mon programme plante au bout d'un certain nombre de mesures qui varie aléatoirement.
J'ai donc rendu mon programme minimaliste afin d'en trouver la cause mais sans succès.
Code d'erreur:
-1073807339
Message d'erreur:
VISA Read dans Tektronix DPO MSO 2000 4000 Series.lvlib:Error Query.vi->Tektronix DPO MSO 2000 4000 Series.lvlib:Fetch Waveform Measurement.vi->Tektronix DPO MSO 2000 4000 Series.lvlib:Read Waveform Measurement.vi->TEST BUG.vi
Pièces jointes :
Test Bug.JPG ‏88 KB

j'ai "trouvé" ceci ... peut-être un début de piste.
http://forums.ni.com/t5/LabVIEW/ERROR-gt-1073807339-occured-at-VISA-read-in-Labview-gt-Serial-vi/td-...
http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0

Problème d'acquisition de mesures avec un module 6219

Bonjour,
Je possède un module NI 6219 et je souhaite faire des mesures de température avec un thermocouple de type K.
J'arrive à connecter le module au PC mais les mesures que j'obtiens sont désordonnées et complétement incohérentes que ce soit sur LabView ou sur Max. J'ai également fait des mesures de tension et j'obtiens les mêmes résultats.
Pourriez-vous m'aider à résoudre ce problème ?

Hello,
Concernant ton vi, il y aurai pas mal de commentaires...., désolé je ne peux pas rentrer dans détail.
Les réponses précédentes te dirigent vers les exemples, pour être encore plus précis, je te conseil l'exemple "Cont Acq Thermocouple Samples-Int Clk.vi."
dans:
E/S materielles/DAQmx/Mesures analogiques/temperature/Cont Acq Thermocouple Samples-Int Clk.vi.
Tu y verra comment utiliser correctement la fonction de cadencement dont ont parle ci dessus.
Un autre point fondamental : dans ta config de voie, tu n'a pas câblé ni le type de thermocoule, ni la compensation de soudure froide.... C'est vital si tu veux que tes mesures de températures soient justes...
Quel module pour thermocoupe utilises tu dans ton châssis cDaq9181? Selon le hardware, les fréquences d'échantillonnages doivent parfois être contraintes à certaines valeurs (sous multiple de l'horloge, f maxi etc).
Bon courage
antoine

Tension mini sur module 9205

Bonjour
une question sur un module compact daq 9205, je fais l'acquisition en tension d'un signal qui varie entre 0 et 50mV, la mesure se fait normalement avec un petit probleme.
la source de tension est stable ( par ex: 10mV) et lorsque je fais l'acquisition mon signal fluctue je dirai meme qu'elle est pertubée avec des pics de tension
est ce que mon module peut mesurer des tension aussi faible ? ou alors savez vous d'ou peut venir mon problème
merci

Hi,
And thank you for posting
here. Please post in english on this english forum. If you want, you have a French
community on this link:
French community
I translate your post for
the others users.
Titi2010
want measure a voltage signal between 0 and 50 mV with DAQ9205. Nevertheless the
signal is disturbed (noise and voltage peak).
His
questions:
The
DAQ9205 is able to measure low voltage?
Where
does the problem from?
Could you give me more
details about your configuration?
What is your input configuration
(NRSE, DIFF, GRSE) ?
You can take a look on this
link :
groud loops and returns
Did you specify your
configuration in LabVIEW or MAX (NRSE, DIFF, GRSE)?
Did you use LabVIEW (DAQmx function
or signal express) or MAX?
Do you know the range of
your voltage peak?
Regards,
Samuel G.
Samuel G. | Application Engineer Team Leader
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Comment mesurer le temps d'évolution d'un signal dans un graphe et comparer ce temps mesuré avec une valeur connue?

Pour mon application, je suis obligé de mesurer le temps d'évolution d'un signal acquis (de t1 à t2) par une entrée analogique d' un module NI 9203, et comparer cette valeur avec une valeur connu afin de juger si ce temps d'évolution est correct ou non.
J'espere que vous me donner un exemple qui figure la situation citée ci-dessus.

Hello.
To get an answer on this part of forum you should post in English. Another possibility is to post on the french forum here.
Could you explain us more which problems you have? Could you attach your code and explain to us where are you bloked? It should be helpfull.
Thanks in advance.
Best Regards.
Message Edité par R_Duval le 04-23-2008 12:14 PM
Romain D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
NIDays 2010 : Conférence mondiale de l'instrumentation virtuelle
>>Détails et Inscription<<

Data acquisition problem with NI-DAQmx 9205 and SignalExpress

Hi everyone,
I am using a NI-DAQmx 9205 connected via ethernet to my computer and Labview SignalExpress running to acquire data. I am working with EMG and I use an amplifier system from GrassTechnologies (http://www.grasstechnologies.com/products/ampsystems/ampsystems.html). The way it works is the electrodes are plugged on the amplifier system and the amplifier is plugged to the NI-DAQmx 9205.
I don't know how to setup the system to be able to read properly the emg signal on SignalExpress.
Does anyone know how to use it?
Thank you for youe help
John

Hi John,
If I were an Applications Engineer I'd probably be able to figure this out on my own but would you mind elaborating on your hardware setup a little? You mention plugging into a "NI-DAQmx 9205", however the NI-DAQmx is the data acquisition 'driver', the [NI]9205 is an Analog Input Voltage module. Do you mean to be plugging into a Compact DAQ or cRIO?
Also, I'm not familiar with EMG readings or the amplifiers/electrodes you're working with.
What is the signal type going into the amplifier from the electrodes, and what is the signal type and range (amplitude) of the signal coming out of the amplifier; AC, DC? I'm assume it's all voltage?
Straight voltages are pretty easy to work with provided you can scale it to usable units.
Lets get your hardware and signal types figured out then we'll be able to tell Signal Express how to handle those signals.
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

[Solved] Very strange problem with kernel-modules & NTFS write speed

I was getting very low copying speed when copying files to NTFS partitions, around 8-10 MB. But, when I commented the modules section in /etc/rc.conf file, the speed dramatically improved upto 5-6x. Now, it also created some problems for me. Like vboxdrv is required by Virtualbox to function & cpufreq_ondemand is required by my AMD processor. Please help me & tell what I'm doing wrong. I'm also posting the output of my /etc/rc.conf file here
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Kolkata"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#MOD_AUTOLOAD="yes"
#MODULES=(microcode powernow-k8 cpufreq_ondemand cpufreq_powersave vboxdrv vboxnetflt )
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="AX-64"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=192.168.1.2
netmask=255.255.255.0
gateway=192.168.1.1
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock @acpid syslog-ng network netfs dkms_autoinstaller sshd @crond @alsa dbus hal gdm @cpufreq @cpu)
Last edited by tarun.hellknight (2012-02-04 16:55:39)

Sorry for replying late.. Was very busy.. So, the thing is that I disabled every module & loaded only microcode & powernow-k8 in /etc/rc.local. Now, I'm getting good speed while copying data but the problem is that the processor is running & full speed i.e. 3.0 GHz. I checked it via cat /proc/cpuinfo. Also, there is a message in the bootime, that i'm posting here..
grep: /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_governors: No such file or directory
If it helps, here's the output of cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 5
model name : AMD Athlon(tm) II X4 640 Processor
stepping : 3
microcode : 0x10000b6
cpu MHz : 3000.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 6002.74
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Last edited by tarun.hellknight (2012-02-01 18:49:55)

Specific Problem with Library Module 1:1 Preview Loading

Hi everyone. I've spent hours searching Google & forums for specific tips to try but I've found nothing that solved my problem. I have a very specific problem loading 1:1 previews in Lightroom 3.3 while zoomed to 1:1.
When I initially import a shoot (usually 3000 to 6000 images), I always render 1:1 previews during import. My understanding is that this activity writes full-sized previews to the "Previews" folder, but I also have observed that .DAT files are created in the "Camera Raw Cache" folder. I have my Lightroom Previews folder and my Adobe Camera Raw Cache folder on the **same** solid-state hard disk, which is dedicated to Lightroom.
When I browse these newly-imported images in the Library module in Loupe view at 1:1 zoom, it's very zippy and fast to switch between images. The images load without any message at a lower resolution, and then "snap" to full resolution after 0.25 to 0.5 seconds. No "Loading" message appears.
However, once the previews have "sat around for a while", even if they are still supposedly available in the Previews folder, loading the image at 1:1 in Loupe as described takes 3-5 seconds. Shortly after going to an image, the message "Loading..." is displayed (it doesn't say where from), and 3-5 seconds later, the full res image appears.
This has nothing to do with changes to image settings requiring re-rendering of the preview. These are images that I've imported but haven't browsed in a while. I know that the previews are valid, because I can go to "Library > Previews > Render 1:1 Previews", and the task will complete within 20 or 30 seconds without re-rendering any photos after examining them and apparently finding that there are still valid 1:1 previews for all 4000 of them. After doing this "re-render," the slow loading behavior is the same as before, because the re-render process always completes without actually updating the previews that it found are already there and presumably decided were still valid. Discarding previews by "Library > Previews > Discard 1:1 Previews" and then trying to re-render them also does nothing, because LR3 apparently doesn't immediately delete the discarded previews, so they are picked back up again As-Is by the re-rendering process.
If I had to guess at the reason for this behavior based on the symptoms, I would say that it seems like Lightroom is forcing itself to re-render 1:1 previews upon browsing to images that are older than a certain age (very possibly the same "30 days" after which the 1:1 previews are supposed to be discarded).
Now, I've also observed that deleting the DAT files in the Camera Raw Cache folder has no adverse impact on load speed (which is what I would have expected to see if LR3 was looking for and loading images from this cache instead of the Previews folder).
What this means to me is that once the image previews reach this "outdated" state, I can't get fast 1:1 browsing performance in Loupe with any reliable procedure other than manually deleting [in Windows Explorer] the entire Preview folder and then re-rendering the 1:1 previews for this shoot. This is of course terribly inconvenient when there are recent previews that I want to save.
Note: I do not have any slowness under any circumstance when browsing at "Zoom to Fit". This is only a problem when I'm browsing at 1:1 zoom (like when I'm comparing sharpness between a set of photos).
Note: For images with the slow behavior described, once the image has been loaded once at 1:1 zoom, it's henceforth snappy again when returning to the image (as if Lightroom was once again accepting the Preview file as valid).
So, here's a summary:
Previews (X:\Lightroom Catalog Previews\) and Camera Raw Cache (X:\Lightroom Cache\) are on same, dedicated, fast drive
1:1 previews from recently-imported files load full-res at 1:1 zoom in less than 1/2 second.
Older 1:1 previews take 3-5 seconds to load full-res at 1:1 zoom, even though the previews are supposedly being loaded from still-valid 1:1 previews in the Previews folder.
I'm really tired, so i hope this makes sense. I don't see how this could be a hardware problem, because I get good performance with recently-imported images. I'm running LR3.3 on Win 7 Pro x64 with 8 GB of RAM and a 2.4 GHz Intel Core2 Quad CPU. Never had LR3 beta installed - upgraded to 3.0 from the last 2.X version. After upgrading, in response to this exact issue, I deleted my entire previews folder and rebuilt, but I continue to have the exact same problem on every shoot that I import. It's most noticeable on the large shoots, because I end up having to browse at 1:1 zoom to compare a set of similar images.
Only workaround I've found: in Windows Explorer, manually delete the Previews folder. Return to Lightroom and rebuild 1:1 previews. This forces the previews to be rebuilt for all images.
Another possible workaround I am going to experiment with: setting the Previews to "Do Not Discard", in case the defualt "Discard after 30 days" that I've used is causing or contributing to the problem. If Lightroom is actually discarding the images after 30 days but forgetting that it had discarded them when asked to re-render 1:1's, maybe setting to "Do not discard" will bandage that problem by never discarding them to begin with.
All right, I'm falling asleep at the keyboard. I'm afraid to add more details as they may become incoherent. Hope to hear some good news, as fixing this problem would make my LR3 experience so much more pleasant.
Can anyone assist with this problem?
- Tyson

function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The behaviour after previews have been around for a while (i.e. previews for unedited images) is not normal. There have been a few other reports of similar behaviour, but no real clues as to why it happens.
Yes - this is my problem. Previews should still be valid, and "Library > Previews > Render 1:1 Previews" says the images are still valid, but then Loupe rebuilds them anyways.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
If everything was working correctly, the setting for discard shouldn't have any effect on whether the previews go stale or not. ...
My understanding is that if everything were working as intended, the "setting for discard" that I was referring to (Edit > Catalog Settings > File Handling > "Automatically Discard 1:1 Previews") should be the sole determinant of whether 1:1 previews must be rebuilt for images with unmodified settings.
For example, if I import an image and render a 1:1 preview, and if I set the "Auto Discard 1:1" setting to "30 Days", and if I make no changes to the image's settings, then I would expect that the image should render quickly (under 1/2 second) at 1:1 zoom in Loupe view for the next 30 days. On the 31st day, I would expect the image to take longer to load as a new 1:1 preview was rendered and stored, and then I would expect this new preview to be retained for another 30 days.
I would furthermore expect that the 30-day counter would be reset every time the image was re-rendered (i.e. if I go into Develop and change something).
To a certain extent, this is functioning correctly on my system. When I go to one of these "problem images" that inexplicably load slowly, returning to them subsequently is quick. I think my problem is just, as Rob suggested, that some part of Lightroom's "brain" has wacky ideas about whether an up-to-date 1:1 preview exists or not.
If I choose to "Never" automatically discard 1:1 previews (which is what I just switched to), then I should "Never" see unmodified images taking 3-5 seconds to "Load" at 1:1 zoom in Loupe.
Since I just nuked my Previews folder again last night and re-rendered 1:1's overnight for a 3000 image shoot, it might be a while before I start encountering this bug again. I will certainly post any further related experiences here and will keep checking for anyone who has further insight.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
...we know that Lr3.4 RC fixed the manual discard bug, so, if I were you I would focus any further tests on Lr3.4RC.
Thanks for pointing this out. I will upgrade to 3.4RC - at least then I will be able to force a rebuild of previews from one shoot without having to manually delete the previews for my entire catalog. I'll no longer have to throw out all the food in the refrigerator just because something smells funny.
function(){return A.apply(null,[this].concat($A(arguments)))}
Ian Lyons wrote:
The DAT files are created at the same time as Library previews. However, they are only used in Develop module.
Yes, I definitely agree with this (although, the Cache is probably also used while rendering new previews after "Quick Develop" changes in the Library module....). I posted my observations to this effect just in case someone else wondered the same thing I did. It is clear that the DAT files get written every time a preview is rendered for RAW file. Rob, now that I'm thinking with a clearer mind, I think the only thing these Cached files are used for is if you "return" to recently rendered settings in Develop or Quick Develop - then, that particular combination of settings yields a match in the cache, and LR loads the image from the Cache into Previews and onto the screen. It is logical that the cache wouldn't help us when going to new settings, because the new settings would create a partially or completely different rendering than any other combination of settings. Adobe may be going to more advanced levels of "reusability" than this, but I'm sure this is the general state of things.
You may want to open back up write access to that Cache folder...
Thanks, Rob & Ian!
So, my question, or bug report, still remains for now - why am I biting into a bag of chips marked "Fresh" and finding them Stale? And why does it say "Paper Jam" when there is no paper jam?

Problem in using module AF_Modules/StrictXml2PlainBean in xml to file scena

Hi Expert ,
I have problem in converting XML to CSV in the following structure.
MT_EAN_MASTER
       -E1WBB01
              -E1WBB03
                       -EAN_MASTER
                                -Item_no
                                -Item_desc
                                -ean
I am using AF_Modules/StrictXml2PlainBean in receiver communication channel.
modulekey               parametername                                         parametervalue
abc                          EAN_MASTER.fieldSeparator                    , (comma)
abc                          recordTypes                                              EAN_MASTER
I have to use 3 level hierarchy structure because of a requirement where an item can have multiple ean.
CSV is not getting generated as it is giving me an error in RWB as
The element nesting level for the structure EAN_MASTER is too deep (reference: 3 levels, found: 4 levels): com.sap.aii.af.modules.conversion.xml2plain.ConversionException: The element nesting level for the structure EAN_MASTER is too deep (reference: 3 levels, found: 4 levels) at XML element MT_EAN_MASTER,E1WBB01,E1WBB03,EAN_MASTER
Please provide some solution to generate a CSV with end seperator as newline.

For this scenario,
First I have used FCC for the same structure and CSV is also generated, but the CSV when opened with NOTEPAD it is not showing endSeparator , i.e my first row last element is concatenated with second row first element,there is no row seperator.
But the same when opened with WordPad,we can see the data, row wise
now the destination system open the file in notepad only.
for that i tried using this Bean specified above but it is not fulfilling the requirement.
The parameters I have mentioned in FCC are as follows:
Recordset Structure : E1WBB01,E1WBB03,EAN_MASTER
NAME                                      VALUE
EAN_MASTER.fieldSeparator     ,   (comma)
EAN_MASTER.endSeparator     'nl'
E1WBB03.fieldSeparator            ,
E1WBB03.endSeparator             'nl'
E1WBB01.fieldSeparator            ,
E1WBB01.endSeparator             'nl'
Please provide a solution,why thr endSeparator is not shown in notepad.
Thanks

Lightroom 5.0 on Windows 7 - Photo Caption problem in Book Module

Using Lightroom 5.0 on Windows 7, I have produced a 76 page book in the Book Module with multiple photos on most pages, but two photos were not showing their captions, and did not print same in a proof PDF print run. I had the photo captions in the Meta Data, but have subsequently entered the pertinent photo caption via Custom Text from the left control panel, and also directly into the photo caption print box without success. I have changed the photo size, without a successful outcome, but when I did an auto cell fill of the photo the caption appeared within the photo, but disappeared when sizing was reduced back. I have exhausted all help avenues at this stage.

Frustrated Beginner wrote:
Thanks for your input and efforts to assist. I have resisted removing and replacing, as the 1966 passport photo has a lengthy (approx 60) adjustments showing in the history, as a result of its age. Hence I think that I will just have tolerate these somewhat minor, I suppose, aberrations and just send it off to Blurb as is, as restoring so many old photos to a more presentable print status has taken me 3 months as it is.
I don't understand why this a problem. You are removing a page from the book and adding back again. You are not removing the photo from the catalog, therefore you would not loose you are adjustments. Books are just another way of rendering photos.

Problem importing a module and finding it's commands?

Hi,
I have a problem. I'm trying to import the DFSR module and use it's commands in my PS session.
But, I can't get the commands to show.
I've looked in my system32 directory and I can see the DFSR module folder.
But when I run the command to import the module nothing happens, and it's not showing in my Module window in the ISE.
What could be going wrong?
Thanks

Get-Module -List DFSR
Where did you save the module to?
Modules should be saved to the Modules folder of the profiles folder.
dir "$(Split-Path $profile.CurrentUserCurrentHost)\Modules"
dir "$(Split-Path $profile.AllUsersCurrentHost)\Modules"
¯\_(ツ)_/¯

Having problem with develop module

When I take a pic from library to develop module, I get the "loading" message but then it doesn't go off (and doesn't load); this is a new problem; hasn't happened before; I don't know if recent loading of 2.6 version caused a problem. Thanks for any insight.

Is there anyone that can help? This is frustrating to say the least. The edits are taking effect, but only showing on the filmstrip. If I go back to library the edits are there, and will then show in develop when I take it back again. This makes it just about impossible to apply anything like cloning, or minute edits, because I can't see them when they happen!!

Probleme mesure avec module 9205

Similar Messages

Maybe you are looking for