Probleme mit Lenovo Settings Dependency Package unter Windows 81

Hi,
seit der Installation des Lenovo Settings Dependency Package Version 2.0.0.14 habe ich massive Probleme auf dem Rechner. Ständig funktioniert das WLAN nicht mehr (eingeschränkte Verbindung). Der Rechner bootet auch nur noch extrem langsam. Kennt jemand eine Lösung?
Gruß
Otto-Jörg

Hallo Marcel,
ich habe alles aktualisiert, was mir das System Update angeboten hat. Laut Gerätemanager sind folgende Treiber sind installiert:
1 x1 11b/g/n W-LAN-PCI Express-Half-Mini-Adapter, Microsoft vom 23.04.2013, Version 2008.5.423.2013
Intel Core i5-3230M CPU @2.60GHZ, Microsoft vom 21.04.2009, Version 6.3.9600.16384
Das Protokoll von Systemupdate sieht wie folgt aus:
ThinkVantage System für aktiven Festplattenschutz 1.78.0.11 3/1/2014 10:34:17 PI Installiert
ThinkPad Bluetooth with Enhanced Data Rate Sofü 12.0.0.9100 3/1/ 2014 10:34:36 PI Installiert
camera Driver - 8.1 (64)/8 [32,64) 1.0.0.19 3/1/ 2014 10:36:05 PI Installiert
Intel Chipset Support - 8/8. 1 [32,64) 9.3.0.1021 3/1/ 2014 10:36:33 PI Installiert
Lenovo Solution Center - 8. 1 [64) 2.3.002 3/1/ 2014 10:37:15 PI Installiert
Thinkvantage Fingerprint Software - 8.1 [64) 6.0.0.8102 3/1/2014 10:37:43 PI Installiert
Intel SATA Controller AHCI Driver - 8.1 /8 [64) 11.5.0. 1207 3/1/ 2014 10:38:00 PI Installiert
ThinkPad BIOS Update US [32,64) 2.60.1 .14 3/1/ 2014 10:38:08 PI Installiert
Dolby Advanced Audio V2 User Interface - 8/8.1 (3 7.2.8000. 17 3/2/2014 8:45:47 AIV Installiert
ThinkPad Hotkey Features Integration Package Set1 5.22.0000 3/2/2014 8:45:57 AIV Installiert
Auto Scroll Uti lity - 7 /8.1 (32,64)/8 [64) 2.10 3/2/2014 8:46:21 AIV Installiert
Viele Grüße
Otto-Jörg

Similar Messages

  • Lenovo Settings Dependency Package for Windows 8.1 - fails on T440s

    Hello everybody,
    I just tried to install the Lenovo Settings Dependency Package for Windows 8.1  on my T440s and it repeatedly tells me that it fails because mfplatt.dll is missing. Has anybody experienced that and knows how to proceed in this case?
    Thanks for your help

    I confirm the problem on T510 too.
    I have Windows 8.1 PRO N.
    I installed the windows Windows6.3-KB2835517-x64.msu windows media package.
    After this, I can restart Lenovo Settings Dependency Package and it works wright, without the error on MFPlat.dll
    And after it works, my camera started to work correctly!
    Bye

  • Lenovo settings dependency package & Lenovo Solution Center

    The Lenovo Solution Center showed error message about Battery on System tab,and suggested to install the Lenovo settings dependency package.But there is no Lenovo settings dependency package in the download page for T61p but yes for other models.In the attached Readme.txt, T61p is not supported model.What should I do?What do you think? Thank you for your attention.

    Yes, I use Windows 8.1.I'll try to install that package as you recommend,and report weather any problem occurs or not.Thank you, ColonelONeill.

  • Latest Settings Dependency Package (1.2.0.21) kills TP battery meter

    After installing the latest Settings Dependency Package (i.e. version 1.2.0.21)  the ThinkPad battery meter has disappeared from my Windows task bar.
    Downgrading to 1.1.1.15 -- which can still easily be found via Google -- brings it back.
    Bug (I guess) or feature? Does anybody have a solution or will I just have to wait for the next release of Settings Dependency Package to have it fixed?
    ThinkPad X1 Carbon (3460), Windows 8.1 Preview (had this issue /w stock Windows 8 as well, so it's not Preview specific)
    X1C (3460-2SG) , Windows 8 Pro

    >> Would you recommend staying with Windows' energy settings instead??
    Use Windows to manage power plans (e.g. Energy saver, balanced, high performance, etc) and settings (lid close action, power button action, sleep after XXX minutes, etc)
    Use the Power section of Lenovo Settings (the metro app) to manage ThinkPad-specific settings, such as Battery Stretch, 30 Day Standby, etc
    >> can you tell me how to uninstall the Windows 7 Power Manager? It does not show up in the installed applications control panel. 
    Lenovo Settings Dependency Package and Power Manager actually share the same app GUID and several common components.  To get rid of the old Power Manager remnants which don't belong on Win8, uninstall Lenovo Settings Dependency Package.  Then re-install it.

  • Settings Dependency Package?

    Is there any advantage to installing the Settings Dependency Package to my x220 Windows 8 pro system?
    Solved!
    Go to Solution.

    Read this thread
    As of now, no. I installed it on my upgraded W530. apparently, the Lenovo apps are coming eventually, but right now, the package is pretty useless.
    W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
    Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

  • [Yoga 13][Win 8.1] Unable to install the settings dependency package

    After upgrading to Windows 8.1, the extended settings for the camera (resolution and the like) disappeared from the Lenovo Settings app. The app correctly points out that I do not have the settings dependency package installed, but I have yet to find an installer for it that actually installs it (it points out that it's not a Thinkpad system).
    So, is there any way to return my camera to its former higher-quality resolution?
    If it helps, I'm running the latest drivers, and the lenovo settings app is v2.2~.

    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031994

  • Problems with starting App-v packages in Windows 10

    Hello, 
    I am testing some app-v 5 (sp3) packages on windows 10 (Build 9926). But with some packages I get this Error:
    “The application was unable to start correctly (0xc0000142)”. Click OK to close the application"
    This package contains Google Chrome 41.
    This is the error I can find in the Event Viewer:
    Log Name: Application
    Source: Application Error
    Date: 20/03/2015 13:06:42
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: %computername%
    Description:
    Faulting application name: chrome.exe, version: 41.0.2272.89, time stamp: 0x54fa819a
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00000000
    Faulting process id: 0x132c
    Faulting application start time: 0x01d06306529e9124
    Faulting application path: C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe
    Faulting module path: unknown
    Report Id: 917fe03e-cef9-11e4-ab38-00155d016404
    Faulting package full name:
    Faulting package-relative application ID:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-20T12:06:42.000000000Z" />
    <EventRecordID>895</EventRecordID>
    <Channel>Application</Channel>
    <Computer>%computername%</Computer>
    <Security />
    </System>
    <EventData>
    <Data>chrome.exe</Data>
    <Data>41.0.2272.89</Data>
    <Data>54fa819a</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>00000000</Data>
    <Data>132c</Data>
    <Data>01d06306529e9124</Data>
    <Data>C:\Users\%username%\AppData\Local\Microsoft\AppV\Client\Integration\F6864A3D-8FDB-49D4-9E52-062D22FEA3B5\Root\VFS\ProgramFilesX86\Google\Chrome\Application\chrome.exe</Data>
    <Data>unknown</Data>
    <Data>917fe03e-cef9-11e4-ab38-00155d016404</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    </EventData>
    </Event>
    If I start the same package in Windows 8.1, no problems occur. 
    Chrome is not the only package that I have problems with.
    I am still new in working with app-v.
    Has anyone experienced the same problem and found a solution for it?

    Hello,
    Since Windows 10 is in technical preview I would guess that this is not supported by anyone.
    Had one googled this the Three following top-topics would have showed up;
    https://support.microsoft.com/en-us/kb/2777003?wa=wsignin1.0
    https://packnowledge.wordpress.com/2014/04/28/launching-a-network-executable-inside-an-app-v-5-virtual-environment-revised/
    http://blogs.technet.com/b/gladiatormsft/archive/2013/06/11/app-v-5-0-on-these-0xc0000142-errors-and-where-they-are-coming-from.aspx
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • Aplicacion Lenovo Settings no arranca

    Hola!
    Hoy al intentar arrancar la aplicación Lenovo Settings descubro que no abre.
    He desinstalado la aplicación y reinstalado las dependencias (Lenovo Settings Dependency Package for Windows 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - Laptop) y vuelvo a instalar la aplicación desde la tienda de microsoft y sigue igual.
    ¿Como se soluciona este problema?
    Mi equipo es un Lenovo B590 con Windows 8.1
    Gracias por vuestra atención.

    Quizás quitando la app y quitando el setting dependecy para verificar si existe alguna actualización de Windows en general e intentar de nuevo con la instalación.
    Cuando utilizas la app de Lenovo esta te indica que descargues settings dependency te indica esto?.
    Sucede lo mismo de que se quede colgada con alguna otra app?.
    De las funciones que ofrece Lenovo settings que es lo que necesitas de ella?, para algunos modelos esta es limitada solo poder controlar ciertos aspectos de audio, micrófono, hostpot, planes de energía aunque solo es un acceso que te lleva a las configuraciones de Windows que ahora se encarga de esto para tu ordenador.
    Un saludo.
    @Antony_Vamu
    Comunidad en Español  English Community  Deutsche Community  РусскоязычноеСообщество
    Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

  • Mobile Hotspot in Lenovo Settings does not start sharing

    I have a X1 Carbon running Win 8 64. The Mobile Hotspot used to work when I got the system for couple of months. It is very useful when staying at hotels which allow only one device per login ID. I usually update drivers on regular basis using System Update 5.02. At one point I noticed that Mobile Hotspot will not start sharing. My network adapter is set to share the connection and I also disabled the Intel Connection Utility that came with one of the WiFi adapter updates. Updated Lenovo Dependency Package and Lenovo Settings Dependency Package several times. Still, the problem persists.
    Any ideas? Thanks
    Just updated one more time. After Start Sharing does not go anywhere a message comes, "Failed to start Internet connection sharing. Please check if another application is hosting or check your network setting"

    I had an X230 with Mobile Hotspot. I found that the Intel application had to be enabled for Lenovo Hotspot to work. Hotspot woudl error out if Intel was not running. Enable the Intel Application, restart the computer and then run System Update again. After all that, restart and test again.
    ... JDH

  • Setting Dependency Package resets sata port 0 when shutting off DVD

    The Lenovo Settings Dependency Package shuts oof the DVD after some time to save battery.
    Everytime the DVD is switched off I get an event log warning storeahci ID 129 resetting "\Device\RaidPort0".
    The same happens if I use the intel driver.
    Can I ignore this warning or must I remove the Settings Dependency Package from my system?
    Am I the only one with this behaviour or have others the same issue?
    Best regards
    MIchael

    MINA2
    I already replied to this same question in the other thread but I can reply here also.
    In short, there is not any fix for this issue.
    Win8/Win8.1 changed the way optical drive power management is handled.  The DVD drive in your system cannot handle the new Win8/Win8.1 method, so this error happens.  I looked into the possibility of DVD firmware update for your system, but the DVD supplier has gone out of business so firmware update is not possible.
    As long as no side-effect happens, I think you can safely ignore the message.  Otherwise you can uninstall the Settings Dependency Package.  But let me be clear that proper fix for this issue on Win8/Win8.1 is not possible.  Sorry for this inconvenience.

  • Lenovo Settings - Windows 8.1 App

    Hallo zusammen
    Habe die App "Lenovo Settings" installiert.
    Dieses versucht immer eine Aktualisierung durchzuführen. Diese Aktualisierung wird jedoch nie beendet und ich kann dann die App auch nicht mehr öffnen, sobald die Aktualisierung gestartet wurde. Sie startet automatisch nach jedem OS-Start nach ca. 3min. Selbst wenn ich in der APP die Einstellung für die automatische Aktualisierung deaktiviere, versucht Lenovo Settings die Aktualisierung durchzuführen. Auch die Deinstallation und anschliessend wieder Installation der APP hat keine Besserung gebracht.
    Weiss da jemand Rat?

    Hallo Yanick,
    ich empfehle dir, das aktuellste Settings Dependency Package manuell von der der o.g. Downloadseite zu installieren. Du kannst dann diese Komponente als Grund ausschließen, warum sich das automatische Update der Settings-App nicht installieren lässt.
    Die Versions-Änderungen sind weiter unten auf der Downloadseite aufgeführt:
    Version 2.3.2.27
    (Fix) Fail to launch Fingerprint reader SW on Fingerprint reader section click.
    (Fix) The "Privacy" mode of camera is turned on unexpectedly after sleep or hibernation.
    (Fix) Sound Effect profiles may not be controlled properly while voice communication is active.
    (Fix) Camera Plus features may not work after the system shutdown.
    (Fix) Sound Effect profile setting may not be recovered after changed automatically.
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • No download for ThinkPad Yoga 12 dependency package 1.6.32.00?

    Our ThinkPad Yoga 12 OEM boxes (also X1 Carbon Gen 3) have dependency package 1.6.32.00 pre-installed (i assume it is for Lenovo Support & Lenovo Companion Metro apps).
    we are trying to rebuild enterprise loads, but in the support website, the only one that can be downloaded is a old version 1.6.28.0 (2014/08/14) for older models ThinkPad Yoga , Yoga 11e, X1C, X1C Gen 2 from http://support.lenovo.com/en/downloads/ds034404
    It is not listed in model 20DK device matrix download page either (only settings dependency package for Lenovo Settings Metro app) http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-...
    is it located in another place? or we have to call enterprise support to get it?
    Solved!
    Go to Solution.

    yipcw wrote:
    Our ThinkPad Yoga 12 OEM boxes (also X1 Carbon Gen 3) have dependency package 1.6.32.00 pre-installed (i assume it is for Lenovo Support & Lenovo Companion Metro apps).
    we are trying to rebuild enterprise loads, but in the support website, the only one that can be downloaded is a old version 1.6.28.0 (2014/08/14) for older models ThinkPad Yoga , Yoga 11e, X1C, X1C Gen 2 from http://support.lenovo.com/en/downloads/ds034404
    It is not listed in model 20DK device matrix download page either (only settings dependency package for Lenovo Settings Metro app) http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-yoga-series-laptops/thinkpad-...
    is it located in another place? or we have to call enterprise support to get it?
    i figured it out, you can get the latest one, 1.6.36.00 is at
    http://download.lenovo.com/lenovo/content/windows8/download-dependency-81.htm

  • W530 with windows 8.1 - how to enter Lenovo settings app?

    I made the big mistake of putting 8.1 on my W530.  I have manged to banish 99% of metro and its apps, to turn the machine back into a developers work station, but one thing I have not worked out how to deal with is the levovo settings.  I can launch it, and it launches a metro window, but it says "an update is available for this app" or simlar, and gives a ok and cancel button. Theither buttons are clickable, and there is no way to "exit" or run this app, or to update it. I have all automatic updates switched on, but I can find no way to actaully update this god forsaken metro abomination to use it.
    I would pay if someone brought out the essential lenovo apps as proper desktop apps for windows 8, like they are for windows 7.  Why would lenovo abandon its desktop power users?

    When you start Lenovo Settings for the first time, it will notify you of the missing dependency package and launch your default browser straight to its download location. But since you removed 99% of the ModernUI apps, I'm guessing you broke some links in the process, thus it doesn't launch for you.
    To my knowledge, the TVSU doesn't fetch this package, and shouldn't, because not everyone uses the Lenovo Settings app, and therefore it's controlled by the Settings app itself through its Auto-Update functionality.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • USB Thinkpad Tastatur mit Trackpoint - Scrollen unter Windows 10

    Ich bin gerade von Windows 8.1 auf Windows 10 umgestiegen.Ich habe das Thinkpad USB Keyboard compact with trackpoint.Ich kann nicht im Windows Explorer, Notepad++ und MusicBee scrollen. In Chrome und Firefox funktioniert es. Unter Windows 8.1 dürfte das alles funktioniert haben, sonst wäre mir das wohl aufgefallen.Installiert habe ich tp_compact_keyboard_1500.exeKann ich demnächst mit einem Treiber Update rechnen?

    Hi ihr Lieben, also ich übernehme keine Verantwortung für meinen Lösungsvorschlag, aber ich habe nun Windows 10 drauf und es hat so funktioniert: 1. Man führt das Update ganz normal auf Windows 7 aus. 2. Wenn Windows 10 den PC neu starten lässt, hält man die Fn Taste gedrückt und drückt immer wieder F2. 3. Das Bios öffnet sich. Und genau hier scheint das Problem zu liegen. Windows 8/10 benötigen andere Einstellungen, als Windows 7. Darum gehen Maus und Tastatur wohl nicht. 4. Man geht mit den Pfeiltasten ganz nach Rechts auf Exit. Dort wählt man unter "OS Optimized Defaults" "Other OS" aus. Und geht anschließend etwas weiter drüber auf "Loard Default Settings". Dann auf "Exit And Change Settings", Der PC startet neu und nun sollte das mit dem Tastaturlayout nicht mehr kommen. Bei mir ging das Upgrade dann weiter. Viel Erfolg.

  • Windows 8.1 update problem on LENOVO Y510P

    Hey guys, 
    Can't find anything similar to my problem and exhausted my options on this, so decided to ask. If it has been answered I couldn't find, so please point me out on the right direction.
    Back history:
    Have a lenovo y510p
    Bought caddy & SSD drive and installed it onto laptop
    Couldn't find a good doc about how to proced so my idea was
    1-restore factory settings,
    2-Copied the Windows C: partition and the SYSTEM_DRV partition to the SSD using Macrium reflect
    3-Went on the BIOS boot order and set the SSD to boot first.
    4-Voila, works fine, boots C: on the SSD and it's super fast.
    Problem:
    Windows 8.1 update can't install on C:. Bummer
    I receive a notification saying that I can update to windows 8.1, which I want to do.
    1 Hit ok to download,
    2 it starts the update process,
    3 finishes installing,
    4 says it needs to restart
    5-RESTARTS TO THE OLD DRIVE, changing the boot order on the BIOS (**bleep**???)
    I then check that nothing was installed even on the old drive, proceed to shut down computer, change boot order back to SSD drive, start windows and receive a message that it couldn't be installed and it has reverted the installation.
    Has anyone ever experienced that?
    My idea now is to 
    Back up my computer again
    Restore factory settings (on old drive)
    Install windows 8.1 to old drive
    Clone windows partition over 
    Change BIOS to boot up on SSD.
    HOWEVER my question is: What happens when I want to install Windows 10 ? Do you think I'll face the same issue? 
    Should I somehow format the old drive's windows partition to prevent this from happening ? 
    Any help is welcome and I thank you all in advance,
    Cheers

    Did you erase the recovery partition on the old drive? My best guess is to create recovery discs or thumbdrive take the old drive out and put the new drive in and use the discs or thumbdrive to restore the system. Then run the updates and then copy your personal information from the old disc to the new disc.
    As for Windows 10, I do not know if they are going to be doing a clean install with the update to windows 10 or doing an in place update so it is hard to know what problems you will encounter.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

Maybe you are looking for