Probleme monitor l1906

probleme monitor l1906 blinking and not connect vga. what solution
http://www.youtube.com/watch?v=tUb-5ASy8ls

Hello softrif,
I have watched your video depicting what your monitor is doing and the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Similar Messages

Tiger Installation Problems, Monitor Doesn't Have Picture

*Originally Posted in Tiger Support Discussions but no response.*
Hi every1,
I'm having problems as well trying to install Tiger on my power mac G3. I did the software exchange thing where I got CD's in place of the DVD. During installation,I restart the computer w/ the CD in drive, the computer starts but my monitor doesn't come on.
I've been looking through the discussions and no 1 is having the same problem i'm having. I downloaded the firmware but when I go 2 install it, A message says the firmware is the latest and doesn't need 2 be upgraded. Could it be a problem w/my Viewsonic LCD VE701b Monitor. Do I need 2 upgrade the video card or is there some other problem?
Power Mac G3 350mhz
1gb Ram (PNY Technologies)
Tempo ATA 133 PCI Card
Western Digital80gb hard drive, 4 partitions
currently using Mac OS 9.2.2 on main HD (8gb, 6.40gbs remaining)
Partition I want 2 install Tiger is 23.30gb
Any info will be helpful.
Thanks every1,
Andrea
Pt. 2
Hey every1,
I see U are stumped as well but anyway, I've been doing research and here's what I did.
1. I reset the PRAM, Nothing.
2. I reset the PMU, Still Nothing.
3. Emailed Tech Support at ViewSonic, (Awaiting a response).
Anybody have any other suggestions? Could it be corrupt CD?
Thanks,
Andrea

Take a look at this thread for useful stuff about the Oxford chipset:
http://forums.macosxhints.com/archive/index.php/t-55470.html
Your computer cannot give you USB2, and USB1 is very very slow, useless for tasks like backing up that involve transfers of large chunks of data. With what is built in on a B&W, your only choice is FW.
The Oxford chipset is not the only one that works, but we know it does and those enclosures give you both stability and the ability to boot from the external drive.
p.s. I responded to this earlier this morning. Are posts getting lost?

Video card problems, monitor distortion

Hi, I have a 17 inch Apple Studio Display (ADC Connector). It's about three years old now. Just recently after I woke up my computer, the monitor suddenly had this crazy distortion that's a kind of banding that goes down the screen. I took a picture and posted it here:
http://www.kickinthehead.org/temp/monitor_distortion.jpg
It actually looks a lot worse now. It's not just limited to the bands, really the entire image has crazy weird artifacts everywhere. Plus if I have a finder window open and then drag it around the screen, the window will be a nonsensical mess of randomly colored pixels. If I minimize the window and bring it back it will refresh somewhat and only be distorted like the rest of the monitor. Same goes for if I'm on a web page and scroll using smooth scrolling
I've tried reseating the card a number of times. The first time it worked for a few hours, but the last time I tried it was only working for a few seconds then went back to being heavily distorted. I tried also dusting out my computer and the card itself in hopes that would do something, but my monitor now probably looks worse than the picture I linked to.
I jiggled the connection, and at one point it looked all right if I put downward pressure on the cord (the screw wasn't in the slot so there was some room to move). My dilemma is I don't know if a new card will solve this problem, or if the connection problem is on the side of the motherboard. I can't really test it unless I get my hands on another card.
has anyone run into this problem before?
Thanks
Dual 2Ghz Power Mac G5 Mac OS X (10.4.6)

I am experiencing the same exact problems and anomolies as Derek with my 9800 pro 128mb and I am having the same conclusions while trouble shooting. I can tell you for sure that it is not a display conection problem for I am seeing it on 2 screens with a dual monitor set up on both a apple 23" lcd and an analog CRT.
During start up the boot screen displays clusters of virtical white lines running the length of the screen. While on the desktop I see this same blocky checkerboard type pateren that randomly changes but is also affected by on screen movement.
The problem first occured Saturday afternoon upon waking from sleep and got progesivly worse within minutes eventually rendering the computer unusable. The distortion flickers about randomly but also seems to be affected when the card is touched. I seem to recall waking from sleep to this problem in the past but it was fixed by a reboot. No such luck this time. I also tried reseating the card to find the distortion temporarally fixed, but then it came back worse then before.
The card is 2 years old now and has never been modified but has been overclocked by 5% for the past year or so using ATIcellerator II with no other problems.
Also, I am a bit concerned about the heatsink being burning hot to the touch within minutes of boot up.
So far this is the only forum I have been able to find concerning this problem. Any comments would help. In the mean time I am going to go shopping for a new card. Hopefully this is not more serious then a bad card.

Wierd problem, monitor no signal.

ok, this is a pretty wierd story...
I was sitting at the computer, worked great with win x64, i turned it off and then i went on a vacation for 2 weeks.
Later when i come home i wanted to use the computer but when i put on the power (power off during vacation) and the cpu fan starts (it always do for some reason) and i press the power on/off button everything dies and i couldn't boot the computer at all anymore. i tried to reset cmos and change dimm slot for my 512 mb memory and it worked so far. now i can boot up, and shut it down when holding the power on/off for a couple of secs but my graphic card wont work. monitor keep says no signal even though i tested 2 different graphic cards and 2 different 512 mb memory compenents. anyone have any experience of this problem or similar problem i would be greatly appreciated if you replied in this thread.
Grettings Golgor

sorry SAB, i cant!
no monitor and btw i just rebuilded my computer with my older asus a7n8 card with all the same components (Not cpu as a7n8 is a socket A) and it works excellent. Either it is the cpu or the motherboard's fault and i guess the cpu cant make the monitor go black?
perhaps something wrong with the agp slot or something. ill try to return it, if i cant i dont know what i'll do...
thx for reply anyway

Mac Mini VGA monitor problem: monitor powers off after 15s

Hi
Trying to hook up a Mac Mini to an ancient VGA monitor (Logix). Bought a Mini Display Port to VGA Adapter. On power up the apple logo displays on the monitor, but then the monitor screen goes black and the power light on the monitor flashes.
Is this the Pin 9 problem referred to here?
http://en.wikipedia.org/wiki/VGA_connector
The monitor only has a VGA input. If the solution is to go buy a new monitor that is fine, but seek advice on which type (budget is an issue)
thanks

Update: I have determined that this is due to a bad connector on the internal fan. One of the wires in the connector popped out, and when I put it back in, the first time it went in backwards, so when I tried to attach the fan cable, it crimped the end of the wire connector. That means that it doesn't securely fasten to the internal board. I can situate it to the point where it touches for awhile, and during this time, the Mac Mini does boot up with a solid power light, and stays on. However, eventually the wire goes loose, shutting down the fan, which in turn shuts down the Mac Mini.
Things I've tried:
- I've searched for a fan replacement on the web, but it cannot be found for purchase (not even on eBay).
- I went to Frys Electronics, but they don't have the fan nor that connector.
- I went to the genius bar at the local Apple store, and was informed that Apple nor Apple Authorized businesses are "allowed" to sell me the part. They did confirm that the fan not properly connected would cause the symptoms I'm experiencing.
I guess at this point, I need to do one of the following:
1. Find an unauthorized Apple repair business would be willing to sell me this part.
2. Figure out how to fix the connector on the wire so that it securely attaches to the prong.
3. Pay Apple over $100 to fix what is basically a $5 repair (this option is largely undesireable).
4. Find someone who is throwing out a broken Mac Mini where I can scavenge for the fan.
Any other suggestions, or any help in accomplishing my goal would still be greatly appreciated.

Problems monitoring audio with a m-audio Firewire 410 card

So I have a M-Audio 410 hooked up through the firewire port on my G5, But it geeks out (audio turns to loud noise, strange defects, spinning ball of slowness appears) everytime I try to monitor audio out of final cut, also when I play LARGE quicktime files!!! The card works fine for all other applications I have on my mac, Cubase, iTunes etc... Anyone else have heard of this, or know what to try. I have most of my video on an external drive, a LACIE media drive, which is my only option as I am working with large amounts of video.
I am thinking this is an issue with the bandwith of firewire on the computer. Maybe too much information between the audio card, and accessing the drive through the other firewire port. Any thoughts?
Cosmos

Hello, I was just about to post the following when I saw your recent post, Wondering if you ever found a solution for what you're running into? (BTW, I went to UO a looooong time ago. Go Ducks!)
We'd like enhance the audio end of our edit suite and are thinking of adding an "FireWire 410" from m-audio for I/O. And ProTools.
But we've read here and there in forums that there may be a problem with Firewire I/O (and maybe the m-audio "FireWire 410" in particular?) and confusion with decks like the DSR-11, etc. Disturbs the video on an external broadcast monitor.
One note: we don't think we'd necessarily be sending audio from the DSR-11 to the "FireWire 410" (and on to headphones and speakers) via firewire.
Anyone out there using FCP and the "FireWire 410" who could comment?
Thanks,
Brad

M93p dual monitor problems; monitor turns off and cannot be turned on again

Hi,
we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5) keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
Maybe there is something wrong with DVI power/DVI signal?
- Monitor independent, as far as I can see
- Independent from Windows energy saving modes
- BIOS updates did not help
[todo]: Try Intel/(AMD?) drivers, let users test.
I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Dual-monitors-problem-VGA-and-Displaypor... is related.
Anyone?
Thx

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Problem Monitoring on TV using the Canvas

I'm learning the process for monitoring a clip/sequence from the timeline/viewer/canvas on a CRT TV.
I captured from tape and was able to view on TV -- using either the Viewer or the Canvas. Then somewhere along the way -- probably when I did some color correction -- I was no longer able to get the clip/sequence to play on the TV using the Canvas; I was still able to do so via the Viewer.
I then noticed that a re-render was needed; I did so but still am only able to monitor through the Viewer, and not the Canvas.
Any tips for understanding what I'm doing wrong?
Thanks.

I'm in the process of trashing my preferences using the how-to from http://www.apple.com/support/finalcutexpress/ which takes me to "Final Cut Express 2: How to Delete the Preference Files" -- http://docs.info.apple.com/article.html?artnum=93690.
In this older doc, Step 9 says to, "Drag the file named "Final Cut Express POA Cache" to the Trash."
I'm running v3.5 and I don't have a file named "Final Cut Express POA Cache": I do have "Final Cut Express Prof Cache.fcpch.
Would you please guide me this last step so I don't create a different problem?
Thanks.

Problem monitoring idoc for some interface

Hi all
I have implemented the "Business process Monitoring" to monitor 10 interfaces.
The communication is between SAP Pi and SAP ECC. SAP PI send idocs type acc_document to SAP ECC. I would to monitor the status of inbound-idoc in SAP ECC System for all interface so I have created 10 Customize Monitoring Object in SAP ECC with transaction BDMO using for the filed
u201CMessage Typeu201D acc_document. The problem is that all interfaces use acc_document so if the idoc of interface 1 generate the error this error is detect to all interface. So, how can I monitor those interfaces correctly?
Thanks a lot for collaboration

Hi Maurizio
Is it impossible to distinguish IDOC content by partner number ?
By the way, it seems you use old technique. In latest BPMon, you can use application monitor for IDoc monitoring.
In more detail, please download the document of IFMon from following link.
http://www.service.sap.com/bpm
=>Media Library
=>Technical Information about "Setup Guide - Interface Monitoring "
=>Customer Information "Interface Monitoring - Overview "
Best Regards
Keiji

Two Strange Problems (monitor resolution acting screwy, firewire problems)

the firewire ports in my dual gig powermac g4 (10.4.10) died randomly. so i put in a pci firewire card, which works fine...but now my monitor resolution resets to 1024x768 every time i restart. it does not remember that i use 1280x1024, and i have to change it every time i turn it on.
the other problem, ever since the firwire died: if i go to "system profiler" and click on "firewire," the system profiler instantly crashes.
i don't know why either of these things are happening, does anyone have any suggestions? thanks!

Ok
I've got a PCI combo fw + usb2 adapter on this G4 mdd 1,25. If I open system profiler and check FireWire nothing detected and sys prof crashes immediately, as yours. Fw works fine, Usb2 not very well, as I can deal with BlueTooth or Pen drive, memory sticks, but not ext hd LaCie 250Gb Usb boxed. After reading a lot I've find that chipset on PCI adapter(s) HAS to be NEC / OPTI branded for
good working on my Mac. The PCI combo card I'm using now has got ALI chipset, tried also another one VIA chip (worst)
If your FW port(s) dead for something wrong, it maybe necessary a PMU reset
Rob

Efi Update problem, Monitor blackout

Hi
I have a MBP running 10.6.8. I also use a 21" Aluminium Apple montor to view.
I ran the MacBook Pro EFI Firmware update version 2.7, and now after the restart the monitor is black!
tried restart again
tried a command, option, p, r, reboot. NO JOY monitor still blacked out.
Does anyone have any light they cn shed on this issue please. Thanks
Arnoux59

Yes, I'm sure all the program downloaded is right. While runing the EFI update program, system always notify no need to update, however, it do need to update from 0055.B06 to 0055.B08.

Problem monitoring server with Azure

Hi,
I'm using Application Insights to monitor one application on Windows Azure, I've followed all the instructions and installed and configured Monitoring Agend on the machine, everything seems fine, but no data was generated about the server! I verifyed the
connections on the URLs f5.services.visualstudio.com,dc.services.visualstudio.com and can connect by telnet normally, I've checked the Event Viewer but nothing! Anyone can help me please?
Wilson Teixeira ALM Consultant

Hi Anastasia,
First of all, very thanks for your help, I verified the web.config and the keys are the same on Azure Portal, I founded the module below on the web.config:
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<remove name="ApplicationInsightsWebTracking"/>
<add name="ApplicationInsightsWebTracking"
type="Microsoft.ApplicationInsights.Extensibility.Web.RequestTracking.WebRequestTrackingModule, Microsoft.ApplicationInsights.Extensibility.Web"
preCondition="managedHandler"/>
</modules>
<validation validateIntegratedModeConfiguration="false"/>
</system.webServer>
I've comment the lines below in web.config because was breaking my application, but if I uncomment no result too and application breaks:

In the Azure portal I can see some diagnostics as Page Viewes and Exceptions.
I can use Fiddler, I just need some time to learn about and use in homologation environment first.
Update:
I installed the same web application on my machine and works perfectly, with the same web.config with the keys commented, I runned fiddler on both machines, in my workstation everthing is fine, but in server I can't capture events related to azure, maybe...
the requests its not working.
Thanks,
Wilson
Wilson Teixeira ALM Consultant

Problem monitoring audio

I have an external NTSC monitor while I edit, but the audio is coming out of the tiny monitor speaker, not through the desktop speakers hooked up to the Mac. Not sure what connection is necessary. I am going through an ADVC 100 that sends A/V to the monitor. Should I try rerouting audio out from the ADVC to the input in the computer? Sounds complicated, and I don't see why I should have to buy more cable connectors. There is no input on my desktop speakers. Shouldn't it be a setting in FCE somewhere?
One thing I know, it's apparently not the Digital Cinema Desktop preview setting under the View menu, as I got a full screen I couldn't exit from, and had to trash prefs and reboot after that. And Canvas Playback doesn't seem to do it either.
Again, how to play audio through desktop speakers while editing and watching video on external monitor. Used to be able to do it with older NLE I used for years.
Also, of course, with DV converter off, I get audio out of the speakers when watching in FCE interface View and Canvas windows
thanks,
Keith

By "desktop speakers" do you mean the speakers you have connected to your computer? If so, that's not how you want to be monitoring the audio.
Nearfield or reference monitors are made for critical evaluation of audio and used primarily in recording studios and post-production facilities. They are made to have a flat response so you actually hear what the audio is really like without any coloring (bass, trebble, etc) that typical consumer speakers will have.
If you don't have the budget for that, get as good a pair of speakers as your budget allows and use those, just keep in mind that they won't be very accurate. Leave the computer speakers for the computer.
-DH
http://tinyurl.com/8s826c

Problem Monitor and print different colours

As a newbie to colour management and my monitor showing one shade? of colour and the print another, I have bought Spyder express 2 suite to try and bring to two together I am using photoshop 7 and XP.
My printers are an Epson R200 & R2400
In the color settings window in photoshop currently are a custom setup working spaces spaces RGB 1998; euroscale coated; gray gamma 2.2 and dot gain 20%
Color management all set to preserve embedded profiles
Are these settings an acceptable starting point or are their better settings
Sorry if this question is to basic but I would like to reach the bottom rung on the ladder to what you see is what you get
Thanks in advance
DaveH

What print settings are you using?
Set the Espon to 'let photoshop manage colour ' and scroll the printer profile down to either stylus photo R200 or stylus photo R2400 . This give better results when using canned profiles.
I have custom printer profiles for my 3800 and the colours are now spot on when they previously had a nasty magenta bias.
If that fails - try ' let printer manage colours ' and do a test print with various colour changes within the driver.

Problem monitoring BPM

Hi Friends
I have made the File to File scenario using BPM ,
I can se the file is being picked up by the sender cc , but no further things happened
When I try to monitor the BPM wih SXMB_MONI_BPE it says no work item exists.
I can se message in SXI_MONITOR , but when I click in the tab PE it shows 0 in the number of queu and number of entries displayed
Do i need to do any settings before executing any BPM scenario?
Please let me know.

Hi Prateek
Thanks for the quick answer.
the cache shows green.
it is a simple File to File scenario , we have installed a new PI system and I want to try to run BPM , and I found the blog Walkthrough with BPM
by Krishna Moorthy P
is there any special thing I have to set up.
best regards
Fadel.

Probleme monitor l1906

Similar Messages

Maybe you are looking for