Probleme with macbook pro and avast

Hello,
please i have a macbook pro mi-2009 with mac os x 10.8.5 and i installed avast and then all the applications don't want to start unless safari and default software and when i restart my mac he don't want to start again and when i started with windows boot camp he start normal.
Sorry for my english
and thanks

i tell you that the machine don't want to start with mac os it start just with windows, and i don't have a time machine to restore to the backup

Similar Messages

Problem with Macbook pro and Airport Express!!!

I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
Is it an issue with having to re access the network I created with the Airport utility?
It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

Firestore Importing Problems with MacBook Pro and FCP

Hello,
I've encountered a problem trying to import my P2 files from my brand new Firestore and for some reason my trusty MacBook Pro doesn't acknowledge their existence. Here's my process so far:
1.) I captured the footage in P2 mode at 720/24P
2.) I initially just tried to plug the Firestore into the computer.
3.) Then I saw that I had to set it up into DD Drive mode. I did this before running the "Organize P2" utility.
4.) When I opened the Firestore's icon on the desktop I saw only the ten reel folders (numbered 0-9) and the log folder. None of these folders had any clips inside them.
5.) After checking the manual again I hit the "organize P2" utility. This did not make any files show up.
6.) I tried "Import Panasonic P2" inside of FCP, but it doesn't see the files either.
7.) The only encouraging factor is that I CAN playback the files on my HVX200 from the device.
BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
Thank you so much,
Stef

BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
FCP>main menu>file>Log & Transfer window

Printing problems with macbook pro and canon 4150

I have a Macbook Pro running 10.6.8. I also have a Canon imageclass MF4150 printer. I downloaded from the canon website the driver Mac-UFR II Printer Driver V2.25. When I try to print, I get an error message.
Can anyone suggest a generic printer driver that would work?
Thanks in advance for the help.
kate

I have a NetGear WGR614 that has worked without issue for a macmini, my MBP and direct-wired PCs and Linux towers. It only has issues when ATT DSL causes connectivity issues what require them fixing things in their connection centers.
WGR614 is a few years old, but they still sell it.
I was warned years ago against DLink.
LinkSys was recommended almost as more reliable then NetGear.
But then Airport Express is an Apple product and Apple has direct links to set them up from your Mac.

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

Hearing conflicting reports. What camcorders work best with macbook pro and imovie

I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
Thanks.

This forum is for mobile iMovie (iPads & iPhones).
you may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie

Weird problem with Macbook Pro 15" and Asus PB278 monitor

Hi there
I recently bought a brand new MacBook pro 15" the one with a dedicated nvidia 750 vid card. However I'm facing weird problems while connecting it to a external monitor Asus PB278 (1440p monitor). I use a mini display port to display port cable.
My problem is: Sometimes it works perfectly, but then if I put the laptop to sleep, sometimes it won't recognise the screen at wake up, at first I tried to restart the system, power on and off the monitor, connecting and reconnecting the cable... nothing worked. I even bought a expensier cable thinking it was probably a low quality cable. I found that then only way to fix this is to connect the monitor with a mini display to HDMI cable I have (won't support over 1080p), and then put the mini display to display port cable again... it is freaking bizarre.
This is very frustrating, I live outside the US and while the retailer will honor the guarantee I'm not sure if this is a Software or Hardware problem, It will take them about 3 weeks to replace my system which is unfortunate due to I have plenty of work to do. I don't want to send it on guarantee just to find out hey... display recognition is broken again. My questions are:
Is there a way to know if this is a hardware or software problem?
I've heard Yosemite is having some issues regarding external displays, is this one of those?
Have you found yourself experiencing this problem? Could you fix it?
Sorry if my english is a bit weird, thanks in advance.

Hi Gatobolo,
Thank you for contributing to the Apple Support Communities.
It appears that you've discovered unusual behavior with your MacBook Pro and an external display, where you need to temporarily connect a different display adapter before you can use your Asus PB278 again.
I can offer some additional tips to help resolve or further isolate the issue you're seeing.
First, try the following resets to see if they eliminate the behavior:
You can reset the Mac's parameter RAM and SMC.
Next, if the issue occurs again, try restarting your Mac into Safe Mode:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
You can find the steps above in this article:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
If your display is recognized in Safe Mode, or after restarting again, the issue may be due to a software conflict.
Another suggestion mentioned in the article above is to try a different type of display adapter, such as a Mini DisplayPort to Dual Link DVI adapter.
If the issue persists, you can also back up your data, erase your hard drive, and reinstall a fresh copy of OS X Yosemite.
OS X Yosemite: Erase and reinstall OS X
If the issue still occurs after a clean install, troubleshooting the hardware may be necessary.
Best Regards,
Jeremy

Problem of connection with macbook pro and panasonic TV

Hello,
I have a macbook pro and a panasonic TH-42PW*4. This TV has a VGA input. That's why I have bought a VGA adaptater and a VGA cable.
However, when I have tried at home. I copied the video and I can see the name of the model of my TV on my macbook pro. But, it doesn't work. There's nothing on my tv.
If somebody could help, that would be really great.

You might do better not posting your question on the "Using iPhone" board. Perhaps here: http://discussions.apple.com/category.jspa?categoryID=190

Problem with MacBook Pro

I have a MacBook Pro for 2 weeks.
Transfering all data, amail from the Lenovo to MacBook Pro and everything works fine until lunch time today.
Go to the meeting without any problem, return to my desk , lock the MacBook Pro then go out for lunch.
Come back the MacBook Pro is acting very slow, can not open any Applications.
Use Disk Utility to verify, take more than 1 hour to verify and it asks to be repaired?
Invalid Node structure
The volume Macintosh HD was found corrupt and needs to be repaired
Error: This disk needs to be repaired... then use Disk Utility to repair this disk.
Click on the Repair Disk Permissiond and it says that it will take 1 day and 21 hours to complete.
- Is the hard drive going bad?
- Will I loose all the data?
- Can Apple recover without destroying my data?
Moving to a Mac with the thought that it was better than IBM but my first impression is wrong....
Any suggestion or recommendation?
Thanks all.

Unfortunately if you were to take it into an ARS (Apple Retail Store) They wouldn't be able to assist you in recovering the data, Apple doesn't like to be liable for data loss if something happened and they weren't able to recover your data.
Seems like the issue in specific might be with the operating System, I'd reccomend booting into Lion Recovery (Hold the Command key and the letter R on startup) Hold those keys till you get to a screen that says Choose english as the main language, You'll see Utilities, Open disk utility try to run a repair there, If that doesn't work
I'd reccomend trying to do an Archive and Install, Just reinstall the operating system from this recovery partition, Your data will remain in tact.
If that doesn't work, You'll probably have to make a Genius Appointment.
Regards
~Shane

Issues with MacBook Pro and Asus VW266H

I own a 2.4 GHz 15 inch MacBook Pro,and an Asus VW266H (external monitor) that I wanted to connect to my Mac via VGA,since the DVI is connected to my desktop computer.So I went ahead and purchased Apple's MiniDisplay Port to VGA adapter,and connected my Mac to my display.At first,the Mac didn't recognize the display with its name and would only go up to a resolution of 1920x1080(while the maximum resolution of the display is 1920x1200). I restarted the Mac with the display plugged in,and once the laptop booted up,the resolution was 1920x1200 and the display was recognized, but immediately quite a lot of trembling was noticeable.When the display wasn't detected properly(as an Asus VW266H) this problem wasn't present. I'm guessing that this is a compatibility issue,which by the way wasn't fixed by the latest EFI update by Apple,which improved external display compatibility. Does anyone have any idea if the problem might be something else other than lack of compatibility and/or how to fix it?
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Wireless Router issues with MacBook Pro and Windows XP laptops

hello,
I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

Problem with macbook pro keyboard - MID 2011

Hi all, I have problems with my macbook pro keyboard.
I have several keyboard letter that bother me, the letters are e,y,d,h,c & n
When I hit letter 'e', it will come out as 'ey'..
When I hit letter 'y', it will come out as 'ey'..
When I hit letter 'd', it will come out as 'dh'..
When I hit letter 'h', it will come out as 'dh'..
When I hit letter 'c', it will come out as 'cn'..
When I hit letter 'n', it will come out as 'cn'..
please help me out..?

If it turns out to be a hardware problem with the keyboard and the repair is done through Apple, be prepared for a sticker-shock price to fix it. The problem is that Apple considers the keyboard as an integral part of the top-half of the aluminun enclosure (it's called the top case & is CNC milled and quite complex)...to Apple, it is considered one-piece and one part number (top case). The keyboard is held onto the top case with many (~60) very tiny screws and this entire top case is the part that will be replaced. They will NOT replace only the keyboard.
I had the power button quit on my Late 2011 MacBook Pro 13". To fix it through Apple would've cost well over $500. The power button is part of the keyboard assembly (it's not removable from the keyboard and uses the same flex cable assembly) so the keyboard itself needs to be changed. I found the exact replacement keyboard on eBay for ~$30 and changed it myself. There is absolutely nothing trivial about replacing it. It was a huge pain in the butt, especially swapping the keyboard on the top case with all of those teenie-tiny screws. It took me the better part of a day to do it but I've had experience with this type of work for at least 20 years now. If I need to do it again for some reason, it will likely be quicker.
Just beware that a repair could cost some big bucks, even if it's only "just the keyboard".

Quicken 2007 problems with MacBook Pro

I recently bought a MacBook Pro and downloaded Quicken 2007 for Mac. The program keeps freezing up on me -- cursor doesn't work, can't do anything. Has anyone had good or bad experiences with Quicken 2007?

If you plan on moving to Lion (OS X 10.7), you won't be able to take Quicken 2007 with you, as it won't run on that OS.

Probleme with macbook pro and avast

Similar Messages

Maybe you are looking for