Probleme with PCI Express Root Complex

I bought an hp 15t - j100 with Windows 8.1 but on windows 8.1 but i needed change to windows 8 and now i have a problem with PCI Express Root Complex code 28. The drives i have donwload for hp site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
I need help to solve that problem
thanks
and i waiting for help
This question was solved.
View Solution.

Hi:
You need this driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

Similar Messages

Missing driver on PCI Express Root Complex

missing driver all it says is unknown driver on PCI Express Root Complex

Hi:
It is probably this, but I will need the hardware ID from the device if this isn't the driver you needed.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en...

PCI Express Root Complex

UnKnown Devices on PCI Express Root Complex
The drivers for this device are not installed.
i need this drivers

Hi: See if the W8.1 driver works. There isn't any for W10 yet. http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132986_1

PCI Express Root Complex driver

Hello i cant find the driver for this device : here is the descripcion ACPI\HPQ6007\3&11583659&0
and everytime i click on "scan for hardware changes" my laptop freezes and drop this error :
VIDEO DXGKRNL FATAL_ERROR
Some help please

Install the Intel chipset driver and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
See if this intel graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-129523-1&cc=us&dlc=en&lc=en...

Problem with Regular Expression

Hi There!!
I have a problem with regular expression. I want to validate that one word and second word are same. For that I have written a regex
Pattern p=Pattern.compile("([a-z][a-zA-Z]*)\\s\1");
Matcher m=p.matcher("nikhil nikhil");
boolean t=m.matches();
if (t)
          System.out.println("There is a match");
     else
          System.out.println("There is no match");
The result I am getting is always "There is no match
Your timely help will be much appreciated.
Regards

Ram wrote:
ErasP wrote:
You are missing a backward slash in the regex
Pattern p = Pattern.compile("([a-z][a-zA-Z]*)\\s\\1");
But this will fail in this case.
Matcher m = p.matcher("Nikhil Nikhil");It is the reason for that *[a-z]*.The OP had [a-z][a-zA-Z]* in his code, so presumably he know what that means and wants that String not to match.

I have a late 2008 unibody Macbook Pro with PCI express slot.

I have a late 2008 unibody Macbook Pro with PCI express slot, running MAC os 10.6.8 . also I have a Sonnet Tempo Sata Express card plugged in. but only one port works at about 100/mbs with an external HDD. 2nd port wont work, anyone can explain? thank you for your help!
(Ps: the port at the bottom of the express card works, one on top doesnt)

AirPlay Mirroring is compatible with OS X Mountain Lion > http://support.apple.com/kb/HT5404 Make a backup, open App Store and purchase OS X Mountain Lion

Problem with Airport express N (2nd gen)

Problem with Airport express N (2nd gen)
Firmware 7.6.4
ISP - 20 Mbps ethernet cable
I have MacBook Air 13 mid 2013 os x 10.9.5, ipad 4 ios 8.0.2, ipad4 ios 7.1.2 , iphone 5 ios 7.1.1
When i try to use speedtest.net from my Macbook i got good results of download speed and incredible upload http://www.speedtest.net/my-result/3801286946 (connection 300 Mbps) , both ipads got terrible speedtest download result and incredible uploadhttp://www.speedtest.net/my-result/i/981631804 (connection 150 Mbps), iphone 5 got bad download and great uploadhttp://www.speedtest.net/my-result/i/981695357.
All these tests were done near airport express with really good signal and 5ghz. I tried to choose different channels, 802.11 mode, guest ssid, 5ghz ssid ...
I think that something is wrong with my new airport express. Can anyone help me to solve this problem?
ps sorry for my bad english

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Problems with EL expressions

Hi all,
Actually i have a problem. I am working with Tomcat 5.0.XX and when i create a new web app inside webapp directory and define any jsp with EL expressions, these ones don�t evaluate to theirs values.
For instance, this is the code of one.jsp:
<%@taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<html>
<body>
<h1>DATAS</h1>
<table border="5">
<tr><td><b>NAME:</b></td><td><i><c ut value="${param.name}"/></td></tr>
</table>
When i try
http://localhost:8080/webDir/one.jsp?name=Charly
the output is
NAME: ${param.name}
In my WEB-INF/lib dir i have placed jstl.jar and standard.jar
Curiossly, when i put this jsp inside webapps/jsp-examples, all is ok
Thanks in advance

This is caused by your web.xml file.
For backwards compatibility, if you specify web.xml as version 2.3, it disables EL evaluation.
To fix, you need to update your web.xml with the servlet2.4 header.
Look at the example one under ROOT to see the new syntax.
Your web-app tag should look something like this:
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">Cheers,
evnafets

Problem of PCI express link width and speed

hello,
I instantiate the pci express core v1.7 into a pci express endpoint and the core was configured as GEN I x8 or GEN II x4. By using the example design Xilinx offered in the ipcore dir, I could read and write device by PIO mode.
However, when I check the device’s link width and speed by using lspci –vvvv in Linux, I found that no matter what configurations I set, the device link is always trained as GEN I x1, which means the throughput of device, reduce 8 times. May the most important problem is that all logic in the user layer upon transaction layer are written at 250MHz, and if link width and speed are limited 2.5G/T and x1, I need to change user logic circuit which is a huge work.
So my question is how to change the PCI express link width and speed in OS side, or I need to change a new motherboard?
(I guess it related with motherboard, and I check that the PCI express slot in motherboard support GEN II X16. Another issue, when I insert a PCI express GEN II x8 device, the device is also trained as GEN I x1).
lscpi -vvvv
01:00.0 RAM memory: Xilinx Corporation Device 6018
Subsystem: Xilinx Corporation Device 0007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfcff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Device Serial Number 00-00-00-01-01-00-0a-35
Kernel driver in use: card

I also have this issue of the user_link_up is high and everything looks good but the LnkSta widht is 1x. did you ever get any guidance about this?

Problem with Application Express

Good Morning,
I installed Oracle Application Express, but I have a problem with the first login and the creation of my workspace.
During login using the username 'admin' and pwd as the sys's user because until now the only pwd I configure when I installed Oracle Express 10g and Oracle Application Express.
When I go to login, the page seems not to take any command.
I look a your help. Thanks

Check out the {forum:id=137} forum you'll probably get better help there.
By the way, welcome to the forum! :)

I have problems with pci-gpib card under windows me, What I need to know what to do in order to fix this problems?

Hi, I have installed a pci-gpib card in my computer, I have a problem with
installation, the message of troubleshooting wizard is as follow:
"One or more missing GPIB interfaces.
There are several reasons why you might encounter this problem:
Reason: Your GPIB interface is incorrectly installed.
Solution: Please verify that your GPIB interface is correctly installed
and rerun the NI-488.2 Troubleshooting Wizard.
Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
to add the interface to your system properly.
Solution: Click th
e Add Hardware button and the Add GPIB Hardware wizard
will guide you through the process of adding GPIB hardware.
Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
must be working properly in order to use the GPIB interface.
Solution: Click on the System Details button for details about the USB and
1394 host controllers.
Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
must be working properly in order to use the GPIB interface.
Solution: Use the Windows Device Manager to verify that your PCMCIA host
controller is functioning correctly. Start the control panel by selecting
"Start>>Settings>>Control Panel", open the System icon and select the
Device Manager page. If you select "View devices by type", you can look at
the PCMCIA socket properties to ensure it is correctly enabled."
And on system details the message is the next:
"USB Driver type: USB universal host controller"
"This version of windows does not su
pport IEEE 1394."
I am using Windows Me, so i want to know what i need to do to fix this
problems.
Best regards.

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

Problem with file dialog (root frame)

Hi guys
I�m having a problem with open up a filedialog.
I have a rendered jlist and the are some items inside. The user, can right click any item and choose from a list some commands (print, save, update etc)
Everything works fine but when he clicks the SAVE option (again, right click and choose save)
FileDialog fd = new FileDialog(new JFrame(),"Save PAX list",FileDialog.SAVE);
I cannot use new JFrame() (as I did above) because it might block the application.
For this I�m trying to get the root by:
Component c = SwingUtilities.getRoot((Component)e.getSource());
JFrame myFrame = (JFrame)c;
And than:
FileDialog fd = new FileDialog myFrame,"Save PAX list",FileDialog.SAVE);
This get me a null frame :- (
Anyone?

The following worked on a "normal" menu item. I didn't test it on a "popup" menu item:
JMenuItem mi = (JMenuItem)e.getSource();
JPopupMenu popup = (JPopupMenu)mi.getParent();
Component c = SwingUtilities.windowForComponent(popup.getInvoker());
System.out.println(c);

MOVED: Onboard graphic card simultaneous with PCI Express graphic card

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=161634.0

Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03499587#N432
It clearly says:
*Integrated video is not available if a graphics card is installed.
Supports PCI Express x16 graphics cards.
Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
You don't need to disable the integrated video chip (or onboard video).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Notation Problems with Logic Express 8

Hello there,
I´m a new member here and have a question about a notation problem with Express 8.
When I´m trying to double measure bars (is this correct? In german we call them "Doppelstriche". They are to divide one part from another... hope anyone understands this), they disappear. I don´t know why, but it happens after about a minute after writing them into the Complete Set... it never happened in Logic 7, it´s a new problem for me...
I thought that perhaps I pushed a wrong button by accident, but even when I did it correctly, securing everything, locking screensets, it disappeared...
hope anybody does know anything about this,
Alex

We just call them 'double lines' although a double 'bar' line is the thick/thin pair that ends a piece.
I did a simple test myself, just ran some notes in the Piano roll and got some 'score' to edit and dragged and dropped the double lines in place, no problems. I closed, opened, resaved, and played the 'piece' for a few minutes on loop, nothing went wrong.
Perhaps I am missing something but i don't seem to be able to see them dissappearing.

BIG5 Problem with WebLogic Express 6.1

          Hi,
          I found some problem with Chinese Big5 when using JSP. All big5 code convert in
          a wrong format and can't view by browser.
          My server setting is:
          OS: Solaris 8
          Weblogic: Express 6.1
          JDK 1.3.1
          Anyone know how to solve this problem?
          I have tried different way like creating a new string in different encoding type.
          Actually the BIG5 work fine with Solaris 8, JDK1.2.2_05a and Weblogic 5.1. However
          I WEblogic 6.1 only support JDK1.3 or above. Anyone can help me out. Thanks.
          Pls email me at [email protected]


The download binary is the same for WL Full version and WL Express. It's the
license that matters. Contact BEA to obtain / buy a WL Express license.
Ben
"Rajendra" <[email protected]> wrote in message
news:[email protected]..
We have WebLogic 6.1 licensed software. I need to work with WebLogic
Express.
I installed on win2K using the installer available with the CD. Now, what
exactly do I need to do (restricting license..) to work with WebLogic
Express?
I need this info urgently. Any help in this regard is greatlyappreciated.
>
Thanks
Rajendra.
"Michael" <[email protected]> wrote in message
news:[email protected]..
Hi.
WebLogic Express is WebLogic Server with a different license that limits
some of
the WebLogic Server features, such as EJB. Downloading WLS effectively
downloads
WebLogic Express.
Regards,
Michael
raj wrote:
Hi,
does anyone know if it's possible to download weblogic express 6.1 ? icouldn't
find any link on the bea website.
thanks
Raj

Probleme with PCI Express Root Complex

Similar Messages

Maybe you are looking for