Problemen bij installatie Mountain Lion
Ik krijg bij de installatie van Mountain Lion de onderstaande foutboodschap:
Installatie mislukt.
OSX kan niet worden geinstallerd op de schijf "MacIntosh HD" omdat er geen herstel systeem kan worden aangemaakt.
Ga naar www.apple.com/nl/support/no-recovery voor meer informatie.
Herstart het systeem om terug te gaan naar het "oude" OSX.
Ik kan OS X Mountain Lion niet installeren.
Alles werkt normaal met OS X Lion.
Wat kan/moet ik nu doen om toch Mountain Lion te kunnen installeren?
Wie helpt?
Ik heb eigenlijk de zelfde setup en loop tegen het zelfde probleem aan. (dus ook een bootcamp installatie)
Is dit ooit opgelost?
Similar Messages
-
Niet tevreden na update Mountain Lion
Hoi,
Ik wil toch wel mijn ervaringen met Mountain Lion delen.
- na de installatie van ML werkten Imovie, Iphoto, Evernote enz... niet meer. Ik moest ze herinstalleren. Iphoto en Imovie moest ik echter AANKOPEN in de Applestore (gratis geleverd bij mijn Imac van 2011)!! Heb contact gehad met Apple, maar daar spelen ze eerlijk gezegd met mijn voeten.
- vanmorgen bij het uit zijn slaapstand ontwaken van mijn Imac, was ik niet meer verbonden met Internet. Systeemvoorkeuren gingen niet meer open. Ik heb mijn Mac moeten herstarten. Even opgezocht: ik ben niet de enige die na updating naar ML dit probleem heeft.
- ook parallels 6.0 werkt niet meer (maar dat wist ik vooraf) en ik oet hiervan een update kopen.
Wat heeft de update mij dus al gekost:
- ML + Iphoto +Imovie = 39 Euro
- Parallels: 49,9 Euro
= samen bijna 90 Euro + de problemen!!!!
Een niet tevreden Apple-gebruikerProblem partly solved with the aid of a good helpdesk employee at Apple Care. Thanks. Warning: M Audio drivers have a problem with Lion!!!!
-
HD beschadigd na installatiepoging Mountain Lion (..?..)
Ik heb een MacBook Pro (2010), vandaag poging voor installatie naar Mountain Lion gedaan. Eerst een back-up gemaakt via Time-Machine, back-up gemaakt op externe harddisk (LaCie Big Disk 1TB). Mountain Lion gedownload via de App-store, allemaal goed gegaan.
Tijdens de installtie van Mountain Lion krijg ik de volgende melding "installatie mislukt Macintosch HD beschadigd en kan niet worden hersteld". Herstarten en gekozen voor schijfhulpprogramma. Als ik het doelvolume (MacIntosch HD) controleer, dan krijg ik de melding "Deze schijf dient te worden hersteld, klik op herstel schijf". Echter kan ik deze optie nu niet selecteren omdat dit volume hetzelfde is als de opstartschijf. In dat geval kun je dit volume niet herstellen. Mijn idee is dus om vanaf de externe hard disk of installatie DVD op te starten, en dan de HD aan te kiezen voor "herstel schijf".
Als ik de installatie DVD van OS Leopard (10.5) wil gebruiken om op te starten vanaf de DVD, dan komt 'ie in een reboot-loop en blijft de MacBook herstarten. Kan ik überhaupt vanaf Leopard opstarten? Dit is de laatste fysieke installatie-DVD die ik heb, verdere updates (Snow Leopard) heb ik gedaan vanuit de Appstore. Of dien ik de installatie DVD te gebruiken die origineel bij de MacBook geleverd is (10.5.6) ?
Kies ik voor "opstartschijf selecteren" dan vindt hij alleen de Macintosch HD, en niet de externe LaCie. Kies ik voor de installatie DVD (even er in stoppen en herstarten) dan blijft hij in een loop en continue herstarten.
Wat nu?
Zijn er nog opties om te herstarten vanaf een installatie DVD, of externe HD. Of kan ik vanaf de externe HD de laatste back-up terug plaatsen?
HELP... -
Create a bootable Mountain Lion OS X Server installer ?
With Lion and Lion Server it was possible to create a Lion Server installer just bij adding a ServerVersion.plist file in the folder CoreServices.
Adding that enabled the normally greyed-out 'Customize'-button that installed the Server.app and ServerEssentails.pkg (nevertheless an internet connection was still required).
I don't go in details here too much but is a similar procedure possible for Mountain Lion ? To install OS X Server in one row ?Not that I am aware of. If you find a way please disclose.
I fear that this is no longer possible and the reason I say this is that we have already gotten a few BTO mini Servers arriving with Mountain Lion + Server.app installed. However, if you erase the drive and perform and Internet restore you no longer get Mountain Lion + Server.app installed. You get Mountain Lion and then need to go to the App Store, associate the device with an Apple ID which grants you access to Server.app for download. -
RoundCube Webmail Authenticating against Open Directory on Mountain Lion 10.8.x
Hello all,
I've been battling this issue for over a month with no success. Here is what we got:
Mac Mini Server running Mountain Lion Server 10.8.2 running Calendar, Contacts, Mail and Web services.
With there being no webmail present I've gone thru the process of installing RoundCube.
I'm using Postgres as the database.
When I test the ability to login I get the following error messages in the console.app
10/12/12 10:13:27.071 AM log[182]: auth: Error: od(andrew,::1): Authentication server failed to complete the requested operation.
10/12/12 10:13:27.071 AM log[182]: auth: Error: od(andrew,::1): authentication failed for user=andrew, method=DIGEST-MD5
The first line I find the most interesting but have had no success determinign exactly what it means.
I'm using open directory to authenticate and it is working perfectly with every other service so I'm led to believe it's an issue between RoundCube and Open Directory.
ANY help would be appreciated emmensely!Sorry about taking so long to get back on here working on this. I've switched over to MySQL. I had a hard time because mysql.sock was located under /tmp/ rather than /var/mysql/ but I fixed that by using the following command:
sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
Then I reinstalled roundcube. Here is my main.inc.php file:
<?php
+-----------------------------------------------------------------------+
| Main configuration file |
| |
| This file is part of the Roundcube Webmail client |
| Copyright (C) 2005-2011, The Roundcube Dev Team |
| |
| Licensed under the GNU General Public License version 3 or |
| any later version with exceptions for skins & plugins. |
| See the README file for a full license statement. |
| |
+-----------------------------------------------------------------------+
$rcmail_config = array();
// LOGGING/DEBUGGING
// system error reporting: 1 = log; 2 = report (not implemented yet), 4 = show, 8 = trace
$rcmail_config['debug_level'] = 1;
// log driver: 'syslog' or 'file'.
$rcmail_config['log_driver'] = 'file';
// date format for log entries
// (read http://php.net/manual/en/function.date.php for all format characters)
$rcmail_config['log_date_format'] = 'd-M-Y H:i:s O';
// Syslog ident string to use, if using the 'syslog' log driver.
$rcmail_config['syslog_id'] = 'roundcube';
// Syslog facility to use, if using the 'syslog' log driver.
// For possible values see installer or http://php.net/manual/en/function.openlog.php
$rcmail_config['syslog_facility'] = LOG_USER;
// Log sent messages to <log_dir>/sendmail or to syslog
$rcmail_config['smtp_log'] = true;
// Log successful logins to <log_dir>/userlogins or to syslog
$rcmail_config['log_logins'] = false;
// Log session authentication errors to <log_dir>/session or to syslog
$rcmail_config['log_session'] = false;
// Log SQL queries to <log_dir>/sql or to syslog
$rcmail_config['sql_debug'] = false;
// Log IMAP conversation to <log_dir>/imap or to syslog
$rcmail_config['imap_debug'] = false;
// Log LDAP conversation to <log_dir>/ldap or to syslog
$rcmail_config['ldap_debug'] = false;
// Log SMTP conversation to <log_dir>/smtp or to syslog
$rcmail_config['smtp_debug'] = false;
// IMAP
// the mail host chosen to perform the log-in
// leave blank to show a textbox at login, give a list of hosts
// to display a pulldown menu or set one host as string.
// To use SSL/TLS connection, enter hostname with prefix ssl:// or tls://
// Supported replacement variables:
// %n - http hostname ($_SERVER['SERVER_NAME'])
// %d - domain (http hostname without the first part)
// %s - domain name after the '@' from e-mail address provided at login screen
// For example %n = mail.domain.tld, %d = domain.tld
$rcmail_config['default_host'] = 'localhost';
// TCP port used for IMAP connections
$rcmail_config['default_port'] = 143;
// IMAP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use
// best server supported one)
$rcmail_config['imap_auth_type'] = null;
// If you know your imap's folder delimiter, you can specify it here.
// Otherwise it will be determined automatically
$rcmail_config['imap_delimiter'] = null;
// If IMAP server doesn't support NAMESPACE extension, but you're
// using shared folders or personal root folder is non-empty, you'll need to
// set these options. All can be strings or arrays of strings.
// Folders need to be ended with directory separator, e.g. "INBOX."
// (special directory "~" is an exception to this rule)
// These can be used also to overwrite server's namespaces
$rcmail_config['imap_ns_personal'] = null;
$rcmail_config['imap_ns_other'] = null;
$rcmail_config['imap_ns_shared'] = null;
// By default IMAP capabilities are readed after connection to IMAP server
// In some cases, e.g. when using IMAP proxy, there's a need to refresh the list
// after login. Set to True if you've got this case.
$rcmail_config['imap_force_caps'] = false;
// By default list of subscribed folders is determined using LIST-EXTENDED
// extension if available. Some servers (dovecot 1.x) returns wrong results
// for shared namespaces in this case. http://trac.roundcube.net/ticket/1486225
// Enable this option to force LSUB command usage instead.
$rcmail_config['imap_force_lsub'] = false;
// Some server configurations (e.g. Courier) doesn't list folders in all namespaces
// Enable this option to force listing of folders in all namespaces
$rcmail_config['imap_force_ns'] = false;
// IMAP connection timeout, in seconds. Default: 0 (no limit)
$rcmail_config['imap_timeout'] = 0;
// Optional IMAP authentication identifier to be used as authorization proxy
$rcmail_config['imap_auth_cid'] = null;
// Optional IMAP authentication password to be used for imap_auth_cid
$rcmail_config['imap_auth_pw'] = null;
// Type of IMAP indexes cache. Supported values: 'db', 'apc' and 'memcache'.
$rcmail_config['imap_cache'] = null;
// Enables messages cache. Only 'db' cache is supported.
$rcmail_config['messages_cache'] = false;
// SMTP
// SMTP server host (for sending mails).
// To use SSL/TLS connection, enter hostname with prefix ssl:// or tls://
// If left blank, the PHP mail() function is used
// Supported replacement variables:
// %h - user's IMAP hostname
// %n - http hostname ($_SERVER['SERVER_NAME'])
// %d - domain (http hostname without the first part)
// %z - IMAP domain (IMAP hostname without the first part)
// For example %n = mail.domain.tld, %d = domain.tld
$rcmail_config['smtp_server'] = 'localhost';
// SMTP port (default is 25; use 587 for STARTTLS or 465 for the
// deprecated SSL over SMTP (aka SMTPS))
$rcmail_config['smtp_port'] = 25;
// SMTP username (if required) if you use %u as the username Roundcube
// will use the current username for login
$rcmail_config['smtp_user'] = '';
// SMTP password (if required) if you use %p as the password Roundcube
// will use the current user's password for login
$rcmail_config['smtp_pass'] = '';
// SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use
// best server supported one)
$rcmail_config['smtp_auth_type'] = '';
// Optional SMTP authentication identifier to be used as authorization proxy
$rcmail_config['smtp_auth_cid'] = null;
// Optional SMTP authentication password to be used for smtp_auth_cid
$rcmail_config['smtp_auth_pw'] = null;
// SMTP HELO host
// Hostname to give to the remote server for SMTP 'HELO' or 'EHLO' messages
// Leave this blank and you will get the server variable 'server_name' or
// localhost if that isn't defined.
$rcmail_config['smtp_helo_host'] = '';
// SMTP connection timeout, in seconds. Default: 0 (no limit)
$rcmail_config['smtp_timeout'] = 0;
// SYSTEM
// THIS OPTION WILL ALLOW THE INSTALLER TO RUN AND CAN EXPOSE SENSITIVE CONFIG DATA.
// ONLY ENABLE IT IF YOU'RE REALLY SURE WHAT YOU'RE DOING!
$rcmail_config['enable_installer'] = false;
// provide an URL where a user can get support for this Roundcube installation
// PLEASE DO NOT LINK TO THE ROUNDCUBE.NET WEBSITE HERE!
$rcmail_config['support_url'] = 'http://www.crawfordworks.ca/contact';
// replace Roundcube logo with this image
// specify an URL relative to the document root of this Roundcube installation
$rcmail_config['skin_logo'] = null;
// automatically create a new Roundcube user when log-in the first time.
// a new user will be created once the IMAP login succeeds.
// set to false if only registered users can use this service
$rcmail_config['auto_create_user'] = true;
// use this folder to store log files (must be writeable for apache user)
// This is used by the 'file' log driver.
$rcmail_config['log_dir'] = 'logs/';
// use this folder to store temp files (must be writeable for apache user)
$rcmail_config['temp_dir'] = 'temp/';
// lifetime of message cache
// possible units: s, m, h, d, w
$rcmail_config['message_cache_lifetime'] = '10d';
// enforce connections over https
// with this option enabled, all non-secure connections will be redirected.
// set the port for the ssl connection as value of this option if it differs from the default 443
$rcmail_config['force_https'] = false;
// tell PHP that it should work as under secure connection
// even if it doesn't recognize it as secure ($_SERVER['HTTPS'] is not set)
// e.g. when you're running Roundcube behind a https proxy
// this option is mutually exclusive to 'force_https' and only either one of them should be set to true.
$rcmail_config['use_https'] = false;
// Allow browser-autocompletion on login form.
// 0 - disabled, 1 - username and host only, 2 - username, host, password
$rcmail_config['login_autocomplete'] = 0;
// Forces conversion of logins to lower case.
// 0 - disabled, 1 - only domain part, 2 - domain and local part.
// If users authentication is not case-sensitive this must be enabled.
// After enabling it all user records need to be updated, e.g. with query:
// UPDATE users SET username = LOWER(username);
$rcmail_config['login_lc'] = 0;
// Includes should be interpreted as PHP files
$rcmail_config['skin_include_php'] = false;
// display software version on login screen
$rcmail_config['display_version'] = false;
// Session lifetime in minutes
// must be greater than 'keep_alive'/60
$rcmail_config['session_lifetime'] = 10;
// session domain: .example.org
$rcmail_config['session_domain'] = '';
// session name. Default: 'roundcube_sessid'
$rcmail_config['session_name'] = null;
// Backend to use for session storage. Can either be 'db' (default) or 'memcache'
// If set to memcache, a list of servers need to be specified in 'memcache_hosts'
// Make sure the Memcache extension (http://pecl.php.net/package/memcache) version >= 2.0.0 is installed
$rcmail_config['session_storage'] = 'db';
// Use these hosts for accessing memcached
// Define any number of hosts in the form of hostname:port or unix:///path/to/sock.file
$rcmail_config['memcache_hosts'] = null; // e.g. array( 'localhost:11211', '192.168.1.12:11211', 'unix:///var/tmp/memcached.sock' );
// check client IP in session athorization
$rcmail_config['ip_check'] = false;
// check referer of incoming requests
$rcmail_config['referer_check'] = false;
// X-Frame-Options HTTP header value sent to prevent from Clickjacking.
// Possible values: sameorigin|deny. Set to false in order to disable sending them
$rcmail_config['x_frame_options'] = 'sameorigin';
// this key is used to encrypt the users imap password which is stored
// in the session record (and the client cookie if remember password is enabled).
// please provide a string of exactly 24 chars.
$rcmail_config['des_key'] = 'Qw4jLYQK+MyNLPIRmON7Lq+Z';
// Automatically add this domain to user names for login
// Only for IMAP servers that require full e-mail addresses for login
// Specify an array with 'host' => 'domain' values to support multiple hosts
// Supported replacement variables:
// %h - user's IMAP hostname
// %n - http hostname ($_SERVER['SERVER_NAME'])
// %d - domain (http hostname without the first part)
// %z - IMAP domain (IMAP hostname without the first part)
// For example %n = mail.domain.tld, %d = domain.tld
$rcmail_config['username_domain'] = '';
// This domain will be used to form e-mail addresses of new users
// Specify an array with 'host' => 'domain' values to support multiple hosts
// Supported replacement variables:
// %h - user's IMAP hostname
// %n - http hostname ($_SERVER['SERVER_NAME'])
// %d - domain (http hostname without the first part)
// %z - IMAP domain (IMAP hostname without the first part)
// For example %n = mail.domain.tld, %d = domain.tld
$rcmail_config['mail_domain'] = '';
// Password charset.
// Use it if your authentication backend doesn't support UTF-8.
// Defaults to ISO-8859-1 for backward compatibility
$rcmail_config['password_charset'] = 'ISO-8859-1';
// How many seconds must pass between emails sent by a user
$rcmail_config['sendmail_delay'] = 0;
// Maximum number of recipients per message. Default: 0 (no limit)
$rcmail_config['max_recipients'] = 0;
// Maximum allowednumber of members of an address group. Default: 0 (no limit)
// If 'max_recipients' is set this value should be less or equal
$rcmail_config['max_group_members'] = 0;
// add this user-agent to message headers when sending
$rcmail_config['useragent'] = 'Roundcube Webmail/'.RCMAIL_VERSION;
// use this name to compose page titles
$rcmail_config['product_name'] = 'Tri Innovations Webmail';
// try to load host-specific configuration
// see http://trac.roundcube.net/wiki/Howto_Config for more details
$rcmail_config['include_host_config'] = false;
// path to a text file which will be added to each sent message
// paths are relative to the Roundcube root folder
$rcmail_config['generic_message_footer'] = '';
// path to a text file which will be added to each sent HTML message
// paths are relative to the Roundcube root folder
$rcmail_config['generic_message_footer_html'] = '';
// add a received header to outgoing mails containing the creators IP and hostname
$rcmail_config['http_received_header'] = false;
// Whether or not to encrypt the IP address and the host name
// these could, in some circles, be considered as sensitive information;
// however, for the administrator, these could be invaluable help
// when tracking down issues.
$rcmail_config['http_received_header_encrypt'] = false;
// This string is used as a delimiter for message headers when sending
// a message via mail() function. Leave empty for auto-detection
$rcmail_config['mail_header_delimiter'] = NULL;
// number of chars allowed for line when wrapping text.
// text wrapping is done when composing/sending messages
$rcmail_config['line_length'] = 72;
// send plaintext messages as format=flowed
$rcmail_config['send_format_flowed'] = true;
// don't allow these settings to be overriden by the user
$rcmail_config['dont_override'] = array();
// Set identities access level:
// 0 - many identities with possibility to edit all params
// 1 - many identities with possibility to edit all params but not email address
// 2 - one identity with possibility to edit all params
// 3 - one identity with possibility to edit all params but not email address
$rcmail_config['identities_level'] = 0;
// Mimetypes supported by the browser.
// attachments of these types will open in a preview window
// either a comma-separated list or an array: 'text/plain,text/html,text/xml,image/jpeg,image/gif,image/png,application/pdf'
$rcmail_config['client_mimetypes'] = null; # null == default
// mime magic database
$rcmail_config['mime_magic'] = '/usr/share/misc/magic';
// path to imagemagick identify binary
$rcmail_config['im_identify_path'] = null;
// path to imagemagick convert binary
$rcmail_config['im_convert_path'] = null;
// maximum size of uploaded contact photos in pixel
$rcmail_config['contact_photo_size'] = 160;
// Enable DNS checking for e-mail address validation
$rcmail_config['email_dns_check'] = false;
// PLUGINS
// List of active plugins (in plugins/ directory)
$rcmail_config['plugins'] = array();
// USER INTERFACE
// default messages sort column. Use empty value for default server's sorting,
// or 'arrival', 'date', 'subject', 'from', 'to', 'fromto', 'size', 'cc'
$rcmail_config['message_sort_col'] = '';
// default messages sort order
$rcmail_config['message_sort_order'] = 'DESC';
// These cols are shown in the message list. Available cols are:
// subject, from, to, fromto, cc, replyto, date, size, status, flag, attachment, 'priority'
$rcmail_config['list_cols'] = array('subject', 'status', 'fromto', 'date', 'size', 'flag', 'attachment');
// the default locale setting (leave empty for auto-detection)
// RFC1766 formatted language name like en_US, de_DE, de_CH, fr_FR, pt_BR
$rcmail_config['language'] = null;
// use this format for date display (date or strftime format)
$rcmail_config['date_format'] = 'Y-m-d';
// give this choice of date formats to the user to select from
$rcmail_config['date_formats'] = array('Y-m-d', 'd-m-Y', 'Y/m/d', 'm/d/Y', 'd/m/Y', 'd.m.Y', 'j.n.Y');
// use this format for time display (date or strftime format)
$rcmail_config['time_format'] = 'H:i';
// give this choice of time formats to the user to select from
$rcmail_config['time_formats'] = array('G:i', 'H:i', 'g:i a', 'h:i A');
// use this format for short date display (derived from date_format and time_format)
$rcmail_config['date_short'] = 'D H:i';
// use this format for detailed date/time formatting (derived from date_format and time_format)
$rcmail_config['date_long'] = 'Y-m-d H:i';
// store draft message is this mailbox
// leave blank if draft messages should not be stored
// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
$rcmail_config['drafts_mbox'] = 'Drafts';
// store spam messages in this mailbox
// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
$rcmail_config['junk_mbox'] = 'Junk';
// store sent message is this mailbox
// leave blank if sent messages should not be stored
// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
$rcmail_config['sent_mbox'] = 'Sent Messages';
// move messages to this folder when deleting them
// leave blank if they should be deleted directly
// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
$rcmail_config['trash_mbox'] = 'Trash';
// display these folders separately in the mailbox list.
// these folders will also be displayed with localized names
// NOTE: Use folder names with namespace prefix (INBOX. on Courier-IMAP)
$rcmail_config['default_folders'] = array('INBOX', 'Drafts', 'Sent Messages', 'Junk', 'Trash');
// automatically create the above listed default folders on first login
$rcmail_config['create_default_folders'] = false;
// protect the default folders from renames, deletes, and subscription changes
$rcmail_config['protect_default_folders'] = true;
// if in your system 0 quota means no limit set this option to true
$rcmail_config['quota_zero_as_unlimited'] = false;
// Make use of the built-in spell checker. It is based on GoogieSpell.
// Since Google only accepts connections over https your PHP installatation
// requires to be compiled with Open SSL support
$rcmail_config['enable_spellcheck'] = true;
// Enables spellchecker exceptions dictionary.
// Setting it to 'shared' will make the dictionary shared by all users.
$rcmail_config['spellcheck_dictionary'] = false;
// Set the spell checking engine. 'googie' is the default. 'pspell' is also available,
// but requires the Pspell extensions. When using Nox Spell Server, also set 'googie' here.
$rcmail_config['spellcheck_engine'] = 'googie';
// For a locally installed Nox Spell Server, please specify the URI to call it.
// Get Nox Spell Server from http://orangoo.com/labs/?page_id=72
// Leave empty to use the Google spell checking service, what means
// that the message content will be sent to Google in order to check spelling
$rcmail_config['spellcheck_uri'] = '';
// These languages can be selected for spell checking.
// Configure as a PHP style hash array: array('en'=>'English', 'de'=>'Deutsch');
// Leave empty for default set of available language.
$rcmail_config['spellcheck_languages'] = NULL;
// Makes that words with all letters capitalized will be ignored (e.g. GOOGLE)
$rcmail_config['spellcheck_ignore_caps'] = false;
// Makes that words with numbers will be ignored (e.g. g00gle)
$rcmail_config['spellcheck_ignore_nums'] = false;
// Makes that words with symbols will be ignored (e.g. g@@gle)
$rcmail_config['spellcheck_ignore_syms'] = false;
// Use this char/string to separate recipients when composing a new message
$rcmail_config['recipients_separator'] = ',';
// don't let users set pagesize to more than this value if set
$rcmail_config['max_pagesize'] = 200;
// Minimal value of user's 'keep_alive' setting (in seconds)
// Must be less than 'session_lifetime'
$rcmail_config['min_keep_alive'] = 60;
// Enables files upload indicator. Requires APC installed and enabled apc.rfc1867 option.
// By default refresh time is set to 1 second. You can set this value to true
// or any integer value indicating number of seconds.
$rcmail_config['upload_progress'] = false;
// Specifies for how many seconds the Undo button will be available
// after object delete action. Currently used with supporting address book sources.
// Setting it to 0, disables the feature.
$rcmail_config['undo_timeout'] = 0;
// ADDRESSBOOK SETTINGS
// This indicates which type of address book to use. Possible choises:
// 'sql' (default) and 'ldap'.
// If set to 'ldap' then it will look at using the first writable LDAP
// address book as the primary address book and it will not display the
// SQL address book in the 'Address Book' view.
$rcmail_config['address_book_type'] = 'sql';
// In order to enable public ldap search, configure an array like the Verisign
// example further below. if you would like to test, simply uncomment the example.
// Array key must contain only safe characters, ie. a-zA-Z0-9_
$rcmail_config['ldap_public'] = array();
// If you are going to use LDAP for individual address books, you will need to
// set 'user_specific' to true and use the variables to generate the appropriate DNs to access it.
// The recommended directory structure for LDAP is to store all the address book entries
// under the users main entry, e.g.:
// o=root
// ou=people
// uid=user@domain
// mail=contact@contactdomain
// So the base_dn would be uid=%fu,ou=people,o=root
// The bind_dn would be the same as based_dn or some super user login.
* example config for Verisign directory
$rcmail_config['ldap_public']['Verisign'] = array(
'name' => 'Verisign.com',
// Replacement variables supported in host names:
// %h - user's IMAP hostname
// %n - http hostname ($_SERVER['SERVER_NAME'])
// %d - domain (http hostname without the first part)
// %z - IMAP domain (IMAP hostname without the first part)
// For example %n = mail.domain.tld, %d = domain.tld
'hosts' => array('directory.verisign.com'),
'port' => 389,
'use_tls' => false,
'ldap_version' => 3, // using LDAPv3
'user_specific' => false, // If true the base_dn, bind_dn and bind_pass default to the user's IMAP login.
// %fu - The full username provided, assumes the username is an email
// address, uses the username_domain value if not an email address.
// %u - The username prior to the '@'.
// %d - The domain name after the '@'.
// %dc - The domain name hierarchal string e.g. "dc=test,dc=domain,dc=com"
// %dn - DN found by ldap search when search_filter/search_base_dn are used
'base_dn' => '',
'bind_dn' => '',
'bind_pass' => '',
// It's possible to bind for an individual address book
// The login name is used to search for the DN to bind with
'search_base_dn' => '',
'search_filter' => '', // e.g. '(&(objectClass=posixAccount)(uid=%u))'
// DN and password to bind as before searching for bind DN, if anonymous search is not allowed
'search_bind_dn' => '',
'search_bind_pw' => '',
// Default for %dn variable if search doesn't return DN value
'search_dn_default' => '',
// Optional authentication identifier to be used as SASL authorization proxy
// bind_dn need to be empty
'auth_cid' => '',
// SASL authentication method (for proxy auth), e.g. DIGEST-MD5
'auth_method' => '',
// Indicates if the addressbook shall be hidden from the list.
// With this option enabled you can still search/view contacts.
'hidden' => false,
// Indicates if the addressbook shall not list contacts but only allows searching.
'searchonly' => false,
// Indicates if we can write to the LDAP directory or not.
// If writable is true then these fields need to be populated:
// LDAP_Object_Classes, required_fields, LDAP_rdn
'writable' => false,
// To create a new contact these are the object classes to specify
// (or any other classes you wish to use).
'LDAP_Object_Classes' => array('top', 'inetOrgPerson'),
// The RDN field that is used for new entries, this field needs
// to be one of the search_fields, the base of base_dn is appended
// to the RDN to insert into the LDAP directory.
'LDAP_rdn' => 'cn',
// The required fields needed to build a new contact as required by
// the object classes (can include additional fields not required by the object classes).
'required_fields' => array('cn', 'sn', 'mail'),
'search_fields' => array('mail', 'cn'), // fields to search in
// mapping of contact fields to directory attributes
// for every attribute one can specify the number of values (limit) allowed.
// default is 1, a wildcard * means unlimited
'fieldmap' => array(
// Roundcube => LDAP:limit
'name' => 'cn',
'surname' => 'sn',
'firstname' => 'givenName',
'title' => 'title',
'email' => 'mail:*',
'phone:home' => 'homePhone',
'phone:work' => 'telephoneNumber',
'phone:mobile' => 'mobile',
'phone:pager' => 'pager',
'street' => 'street',
'zipcode' => 'postalCode',
'region' => 'st',
'locality' => 'l',
// if you uncomment country, you need to modify 'sub_fields' above
// 'country' => 'c',
'department' => 'departmentNumber',
'notes' => 'description',
// these currently don't work:
// 'phone:workfax' => 'facsimileTelephoneNumber',
// 'photo' => 'jpegPhoto',
// 'organization' => 'o',
// 'manager' => 'manager',
// 'assistant' => 'secretary',
// Map of contact sub-objects (attribute name => objectClass(es)), e.g. 'c' => 'country'
'sub_fields' => array(),
'sort' => 'cn', // The field to sort the listing by.
'scope' => 'sub', // search mode: sub|base|list
'filter' => '(objectClass=inetOrgPerson)', // used for basic listing (if not empty) and will be &'d with search queries. example: status=act
'fuzzy_search' => true, // server allows wildcard search
'vlv' => false, // Enable Virtual List View to more efficiently fetch paginated data (if server supports it)
'numsub_filter' => '(objectClass=organizationalUnit)', // with VLV, we also use numSubOrdinates to query the total number of records. Set this filter to get all numSubOrdinates attributes for counting
'sizelimit' => '0', // Enables you to limit the count of entries fetched. Setting this to 0 means no limit.
'timelimit' => '0', // Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit.
'referrals' => true|false, // Sets the LDAP_OPT_REFERRALS option. Mostly used in multi-domain Active Directory setups
// definition for contact groups (uncomment if no groups are supported)
// for the groups base_dn, the user replacements %fu, %u, $d and %dc work as for base_dn (see above)
// if the groups base_dn is empty, the contact base_dn is used for the groups as well
// -> in this case, assure that groups and contacts are separated due to the concernig filters!
'groups' => array(
'base_dn' => '',
'scope' => 'sub', // search mode: sub|base|list
'filter' => '(objectClass=groupOfNames)',
'object_classes' => array("top", "groupOfNames"),
'member_attr' => 'member', // name of the member attribute, e.g. uniqueMember
'name_attr' => 'cn', // attribute to be used as group name
// An ordered array of the ids of the addressbooks that should be searched
// when populating address autocomplete fields server-side. ex: array('sql','Verisign');
$rcmail_config['autocomplete_addressbooks'] = array('sql');
// The minimum number of characters required to be typed in an autocomplete field
// before address books will be searched. Most useful for LDAP directories that
// may need to do lengthy results building given overly-broad searches
$rcmail_config['autocomplete_min_length'] = 1;
// Number of parallel autocomplete requests.
// If there's more than one address book, n parallel (async) requests will be created,
// where each request will search in one address book. By default (0), all address
// books are searched in one request.
$rcmail_config['autocomplete_threads'] = 0;
// Max. numer of entries in autocomplete popup. Default: 15.
$rcmail_config['autocomplete_max'] = 15;
// show address fields in this order
// available placeholders: {street}, {locality}, {zipcode}, {country}, {region}
$rcmail_config['address_template'] = '{street}<br/>{locality} {zipcode}<br/>{country} {region}';
// Matching mode for addressbook search (including autocompletion)
// 0 - partial (*abc*), default
// 1 - strict (abc)
// 2 - prefix (abc*)
// Note: For LDAP sources fuzzy_search must be enabled to use 'partial' or 'prefix' mode
$rcmail_config['addressbook_search_mode'] = 0;
// USER PREFERENCES
// Use this charset as fallback for message decoding
$rcmail_config['default_charset'] = 'ISO-8859-1';
// skin name: folder from skins/
$rcmail_config['skin'] = 'larry';
// show up to X items in messages list view
$rcmail_config['mail_pagesize'] = 50;
// show up to X items in contacts list view
$rcmail_config['addressbook_pagesize'] = 50;
// sort contacts by this col (preferably either one of name, firstname, surname)
$rcmail_config['addressbook_sort_col'] = 'surname';
// the way how contact names are displayed in the list
// 0: display name
// 1: (prefix) firstname middlename surname (suffix)
// 2: (prefix) surname firstname middlename (suffix)
// 3: (prefix) surname, firstname middlename (suffix)
$rcmail_config['addressbook_name_listing'] = 0;
// use this timezone to display date/time
// valid timezone identifers are listed here: php.net/manual/en/timezones.php
// 'auto' will use the browser's timezone settings
$rcmail_config['timezone'] = 'auto';
// prefer displaying HTML messages
$rcmail_config['prefer_html'] = true;
// display remote inline images
// 0 - Never, always ask
// 1 - Ask if sender is not in address book
// 2 - Always show inline images
$rcmail_config['show_images'] = 0;
// compose html formatted messages by default
// 0 - never, 1 - always, 2 - on reply to HTML message only
$rcmail_config['htmleditor'] = 0;
// show pretty dates as standard
$rcmail_config['prettydate'] = true;
// save compose message every 300 seconds (5min)
$rcmail_config['draft_autosave'] = 300;
// default setting if preview pane is enabled
$rcmail_config['preview_pane'] = false;
// Mark as read when viewed in preview pane (delay in seconds)
// Set to -1 if messages in preview pane should not be marked as read
$rcmail_config['preview_pane_mark_read'] = 0;
// Clear Trash on logout
$rcmail_config['logout_purge'] = false;
// Compact INBOX on logout
$rcmail_config['logout_expunge'] = false;
// Display attached images below the message body
$rcmail_config['inline_images'] = true;
// Encoding of long/non-ascii attachment names:
// 0 - Full RFC 2231 compatible
// 1 - RFC 2047 for 'name' and RFC 2231 for 'filename' parameter (Thunderbird's default)
// 2 - Full 2047 compatible
$rcmail_config['mime_param_folding'] = 0;
// Set true if deleted messages should not be displayed
// This will make the application run slower
$rcmail_config['skip_deleted'] = false;
// Set true to Mark deleted messages as read as well as deleted
// False means that a message's read status is not affected by marking it as deleted
$rcmail_config['read_when_deleted'] = true;
// Set to true to never delete messages immediately
// Use 'Purge' to remove messages marked as deleted
$rcmail_config['flag_for_deletion'] = false;
// Default interval for keep-alive/check-recent requests (in seconds)
// Must be greater than or equal to 'min_keep_alive' and less than 'session_lifetime'
$rcmail_config['keep_alive'] = 60;
// If true all folders will be checked for recent messages
$rcmail_config['check_all_folders'] = false;
// If true, after message delete/move, the next message will be displayed
$rcmail_config['display_next'] = false;
// 0 - Do not expand threads
// 1 - Expand all threads automatically
// 2 - Expand only threads with unread messages
$rcmail_config['autoexpand_threads'] = 0;
// When replying place cursor above original message (top posting)
$rcmail_config['top_posting'] = false;
// When replying strip original signature from message
$rcmail_config['strip_existing_sig'] = true;
// Show signature:
// 0 - Never
// 1 - Always
// 2 - New messages only
// 3 - Forwards and Replies only
$rcmail_config['show_sig'] = 1;
// When replying or forwarding place sender's signature above existing message
$rcmail_config['sig_above'] = false;
// Use MIME encoding (quoted-printable) for 8bit characters in message body
$rcmail_config['force_7bit'] = false;
// Defaults of the search field configuration.
// The array can contain a per-folder list of header fields which should be considered when searching
// The entry with key '*' stands for all folders which do not have a specific list set.
// Please note that folder names should to be in sync with $rcmail_config['default_folders']
$rcmail_config['search_mods'] = null; // Example: array('*' => array('subject'=>1, 'from'=>1), 'Sent' => array('subject'=>1, 'to'=>1));
// Defaults of the addressbook search field configuration.
$rcmail_config['addressbook_search_mods'] = null; // Example: array('name'=>1, 'firstname'=>1, 'surname'=>1, 'email'=>1, '*'=>1);
// 'Delete always'
// This setting reflects if mail should be always deleted
// when moving to Trash fails. This is necessary in some setups
// when user is over quota and Trash is included in the quota.
$rcmail_config['delete_always'] = false;
// Directly delete messages in Junk instead of moving to Trash
$rcmail_config['delete_junk'] = false;
// Behavior if a received message requests a message delivery notification (read receipt)
// 0 = ask the user, 1 = send automatically, 2 = ignore (never send or ask)
// 3 = send automatically if sender is in addressbook, otherwise ask the user
// 4 = send automatically if sender is in addressbook, otherwise ignore
$rcmail_config['mdn_requests'] = 0;
// Return receipt checkbox default state
$rcmail_config['mdn_default'] = 0;
// Delivery Status Notification checkbox default state
$rcmail_config['dsn_default'] = 0;
// Place replies in the folder of the message being replied to
$rcmail_config['reply_same_folder'] = false;
// Sets default mode of Forward feature to "forward as attachment"
$rcmail_config['forward_attachment'] = false;
// Defines address book (internal index) to which new contacts will be added
// By default it is the first writeable addressbook.
// Note: Use '0' for built-in address book.
$rcmail_config['default_addressbook'] = null;
// Enables spell checking before sending a message.
$rcmail_config['spellcheck_before_send'] = false;
// Skip alternative email addresses in autocompletion (show one address per contact)
$rcmail_config['autocomplete_single'] = false;
// Default font for composed HTML message.
// Supported values: Andale Mono, Arial, Arial Black, Book Antiqua, Courier New,
// Georgia, Helvetica, Impact, Tahoma, Terminal, Times New Roman, Trebuchet MS, Verdana
$rcmail_config['default_font'] = '';
// end of config file -
I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.
If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
-
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
Cannot see my G5 server after upgrading to Mountain Lion. Help!
Hi everyone!
I upgraded to Mountain Lion on my MBP and now my G5 Power PC that I have as a Media Server with all my iTunes movies and music is no longer visible!! Really frustrating because there is a LOT on there. It worked fine with Lion! Am I going to have to downgrade to keep it working?
Please advise.
I have an iMac which is running Lion and it sees it fine. Apple TV sees it too. Not a connectivity issue.can it be something related to wi-fi? I have read other posts talking about loss of connection using wifi. I'm connecting my G5 through an airport express which is expanding my wifi generated from my Apple Time Capsule. It is quite difficult for me to relocate the server close to the Time Capsule and vice versa but if it works, at least that would be something. It was working with Lion about 3 months ago - showing up in Finder, etc.
-
IPhoto update impossible after upgrading to Mountain Lion?
I upgraded from Snow Leopard to Mountain Lion today and when I subsequently went into the iCloud settings I was surprised to learn my version (9.1.3) of iPhoto was not capable of supporting iCloud. The information stated if iPhoto had not been installed from the App Store, then one should go the the apple icon in the top left corner and select "Software Update" from there. When I do that, it is reported I do not have an update available. However, if I open iPhoto and check for an update from its menu, it indicates an update (two, actually) is available but when I click the "Open Software Update" button, I am directed back to the App Store where...no update available is the information provided.
I would really like to use iCloud Photo Stream and is one of the reasons I ponied up $20 to "upgrade" to Mountain Lion. Could someone tell me what I am doing wrong? I have been a MS/Windows user for 20+ years and this initial exposure to difficulties with the Mac OS is not what I expected.
Thanks.Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Try the download while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Will we be able to view our individual facebook accounts on our individual devices, all have our individual games with Mountain Lion or will it automatically synchronise to the same thing? If so, what do we need to do to separate our devices? Would we have to purchase separate Mountain Lions for each device if we did separate them?
Will we be able to view our individual facebook accounts on our individual devices, all have our individual games with Mountain Lion or will it automatically synchronise to the same thing? If so, what do we need to do to separate our devices? Would we have to purchase separate Mountain Lions for each device if we did separate them?
-
I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP
Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office. -
How do you stop Mountain Lion from making endless copies and backups of everything?!
I already have a similar topic on this when I needed to figure out how to stop Mountain Lion from making endless copies of my text edit files and I was going to try the disabling of it that someone in that thread suggested, but I can't find where the Versions backups are being stored.
Anyway, tonight I cam across a new problem, when I went into "about this Mac" and looked at my Storage, I had almost 1gb of data in the "backups" section. I just happened to have Finder open when I went into the Time Machine in the status bar and when it entered Time Machine, I had dozens of copies of my desktop. Thing is, I don't have my Time Machine hard drive connected and I don't have a Time Capsule router/hard drive. And don't give me this garbage about how "It's not real backups, it's just a snapshot" or whatever, because the ONLY things that I have stored on my computer that I have altered since I got mountain lion is two Text Edit files and the Finder Desktop (and yes, I have checked almost all the programs I use, and of the things that Time Machine will open in, those are the only things that have backups listed that I can access) and almost 1gb is being taken up completely needlessly with the computer backing up things onto itself. Obviously these are more than just snapshots and are obviously the real files because after throwing EVERYTHING on my desktop into a file, that file is only 3.8mb in size, so that almost 1GB in backups is coming from SOMEWHERE.
The solution I aluded to in my first sentence also depends on going into the Terminal to make each individual app stop auto saving Versions, however, since my desktop is being backed up, there's no program to stop Mountain Lion from doing that.
Can anyone help me figure out how to make it stop backing up? Seriously, almost 1 gb is being totally wasted on a series of desktop items that are 3.8mb in size, one Text Edit file that is 250kb in size, and another text edit file that is 41kb in size. What person in Apple would possibly have thought this endless backing up of files onto the main hard drive would have been a good idea? So in a year if I did nothing but go on the internet, save one picture to one file on my desktop and did nothing else with my computer, would I have 200 gb of desktop backups that the computer saved onto itself? Are you kidding me? OR failing that, can anyone tell me how to find this damned backup file and delete it? I'm not an idiot, I know how to plug in a hard drive or flash drive and backup my information, I don't need my computer to be making hundreds of copies of every single file on my computer that I change slightly onto itself that not only needlessly eats up it's own space, but if the hard drive died, all those "backups" would be gone too because it wrote the backups to itself.
I am so frustrated by this totally ridiculous and wasteful "feature" they put in, it does nothing but waste hard drive space with it's hundreds of copies of everything you alter slightly. And I am absolutely not starting any video editing projects until I figure out how to turn this off. If around 4mb of total text and desktop backups add up to almost 1gb in a few weeks, what the heck is a video editing project going to end up in with size? Am I the only one completely flustered by this ridiculousness? Is there any point in writing into Apple to complain or are they just going to say "No, we're brilliant, we think this is an amazing feature so you just have to deal iwth it and when your hardd drive fills up, too bad, jerk!"?? Help! Thanks!Well as I pointed out in my post, "Sadly, my Text Edit documents are still all there, every single time I opened them and made a small change, there is another copy stretching all the way back to the day I installed Mountain Lion." so if you can explain to me how July 26 - Aug 16 is a week, I will concede that it is a good idea. Short of that, no I have been capable of making my own backups since I was 16 years old (16 years ago) I don't need my computer to endlessly do it for me in a way I am completely unable to shut off. That's what I have external hard drives, flash drives, a DVD burner, Drop Box, E-mail (as in emailing copies to myself) and icloud for. If I am doing something and I don't have access to a single one of those options, I don't know why I brought my computer with me in the first place. And I don't see how you can say it's an illusory gain in disk space, hundreds of copies of text documents, garageband files, Final Cut files, Motion Files and basically any program that makes files onto my comptuer that I can myself make incremental changes to, those all need to be stored somehow. Again, if you can explain to me how July 26 - Aug 16 is a week, I will agree with you that that is a good thing because IF it only saved for a week, it wouldn't be an issue. Sadly, no matter how many links you post, I still have text edit backups stretching from today back to July 26. They're not going away and I have no reason to beleive any other file I edit is going to go away either since they haven't been. They're all there eating up HD space and this imaginary "week" limit is simply not coming into effect. I hate it and there needs to be a simple way to simply shut it off. I didn't spend hundreds of dollars on external drives just for my main hard drive to be filled up with hundreds un useless, undeletable backups of stuff I already have backed up.
-
Emails from one account don't appear in the Inbox of Mail since upgrading to Mountain Lion
I have a couple of email accounts - one is Gmail and one is a domain for my business. Previously Mail would show the Inbox and then a subfolder for each account under Inbox. Any messages received in the accounts would appear in both their own subfolder and also the Inbox. All my rules worked properly and life was good. Now, try as I might I cannot get my domain email account messages to show in the global/unified Inbox.
Originally the domain email folder was totally separate to the Inbox. By changing the IMAP Prefix (removing 'Inbox') I was able to get the folder at least under Inbox.
I purchased a new iMac and used Migration Assistant to move everything, therefore the problem persists. I had additional problems that my address book, rules and On My Mac folders didn't appear - but I solved that by finding the Containers folder and it is like a duplicate of Mail. I moved things from there to the Library/Mail and those particular issues resolved. But for the inbox issue, I have removed data from the Users/Library/Mail and from Library/Containers and started afresh - even deleted the Mail App and reinstalled from my original disc, but as soon as I set up the account it happens again.
Recently I have also started receiving errors when sending to use the Connection Doctor. I don't know if all this is related to a bug in Mountain Lion, the way I have things set up, or my domain/ISP.
Any suggestions on what to try, what it may be or ways around it would be great. I do have a Smart Mailbox for a Total Inbox, but of course the Rules don't work automatically on it. I'm getting sick of running Rules manually. Help please!!I called the support service and she told me to delete my email address and re-enter it. I have no problem since then on receiving and sending emails.
-
How many times can I install mountain lion on my macbook pro?
My Macbook pro came with lion pre-installed. However, I bought at a time that allowed me to update to mountain lion for free. Therefore, I wanted to know if I will have to pay to re-download mountain lion on my Macbook pro if I have to restore the system to its factory settings?
No, since you have already "purchased" (even if for free) 10.8 on the App Store with your AppleID, you own it, so you can reinstall as much as you want.
Matt -
How many times can you reinstall Mountain Lion?
Since I bought the Early 2013 15" MacBook Pro retina laptop used only 17 battery cycles on it now (2.7 with 16GB ram running Mt. Lion) computer I have not reset it. I spoke to Apple and it is registered in my name, I made a new Admin. account and password and Apple had me delete the original owners. I took off anything he had left on it. Applecare also I bought in my name. Apple said I didn't have to reset it and would be fine so I left it. They deauthorized the previous iunes account and the previous owner gave me his ID to deauthorize the computer. It was already deauthorized when I checked. He then changed his password for his security. It runs beautifully and has a Samsung screen.
I deleted the iLife apps and were going to buy them in my name (as his ID came up for updates) but now can't redownload in my name as it says I need Maverick OSon it to do so. I left the Mountain Lion 10.8.5 on it. If I contact Apple will they give me a redemption code for my name or how do I get older versions?
If I reset to new how many times am I able to reinstall Mountain Lion? If I decide to sell it later will I be able to reset it again with no problem for the new owner?
Thank you for your help. This forum is a source for many of us new owners to solve things.As long as you do the download with your Apple ID, it'll be in your name. Reverting back can be a little involved. If you have that in mind, you should make a full backup of your clean install of ML and save it somewhere. Then you can just copy the image back with Carbon Copy Cloner. External drives are cheap, that's how I'd do it.
Maybe you are looking for
-
Sync phone book and calendar by iTunes
After I install Mavericks in my iMAC, I cannot sync my phone book and calendar from iPhone to Mac by iTunes, how can I do?
-
Audio insert editting from FCP to DigiBeta clicks at insert point
Punching in audio on a DigiBeta deck gives a small click in the sound. This is probably due to no audio being played before the punch is made, so the DigiBeta can't crossfade the sound. When syncing the DigiBeta to Pro Tools the punch is seamless. Th
-
IP address is coming in Entered by field in control tab of MO?
Dear SAPIENTS, In the control tab of maintenance order I am able to see IP adress in the field ENTERED BY. Its observed that only to those orders types which are created automatically like preventive maintenance orders or calibration order only this
-
How do i talk to someone about my accont on app store ?
i've been charged several times and i dont know why ...
-
Device identifier is invalid error 200220
I developed a program on one computer using LabView 8, DAQmx 8 and a USB-6008 device. It worked fine at my desk. Then I save the program as a project sent it acroos the street to our shop, took the device over there plugged it in and tried to run the