Problèmes récurrents depuis changement de version sour 4S

Merci de m'indiquer quoi faire : depuis la dernière mise à jour iOs 6.--- sous Iphone 4S je n'ai plus ni WIFI ni bluetooth et ma batterie montre des signes récurrents de faiblesses ! Il serait bon qu'Apple se soucie des ses clients !

Just searching on écran gris check out this page
http://support.apple.com/kb/TS2570?viewlocale=fr_FR&locale=fr_FR

Similar Messages

  • Nous rencontrons en Polynesie Française des problèmes pour payer nos abonnements récurrents sur l'Appstore ou sur iTunes : est-ce que en France vous avez le même problème ?

    Hi,
    Nous rencontrons en Polynesie Française depuis mi-mars des problèmes pour payer nos abonnements récurrents sur l'Appstore ou sur iTunes : est-ce que en France vous avez le même problème ?
    Il semblerait que le prestataire monétique français de l'Appstore/itunes store ait modifié un paramètre et ne respecte pas la réglementation monétique française pour ce type de paiement, ce qui expliquerait les rejets !

    ah oui, voici l'etiquette que je souhaite faire imprimer... j'ai mis le fond bleu pour faire apparaitre le texte, sinon il est transparent..
    Helppp

  • Can't open current library, changes have been made in a newer version.

    I plugged my iPhone into it's dock and iPhoto opened as usual, but then a prompt popped up and said:
    "You can't open your current photo library using version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
    I understand what it means, but I don't have a newer version of iPhoto, so how did this happen? And, more importantly how do I fix it?

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Problème avec Indesign CC, je n'arrive pas à faire un PACKAGE complet, Message : cannot copy necessary linked files(s). Pourtant les liens sont bien mis à jour dans le document. Je n'ai jamais eu de problèmes avec mon ancienne version CS.

    Pouvez-vous m'aider?

    C’est justement ce que j’étais entrain de faire, revérifier tous les noms. Ça m’encourage si c’est ce que vous me suggérez aussi.
    Le 2015-04-30 à 11:19, jmlevy <[email protected]> a écrit :
    Problème avec Indesign CC, je n'arrive pas à faire un PACKAGE complet, Message : cannot copy necessary linked files(s). Pourtant les liens sont bien mis à jour dans le document. Je n'ai jamais eu de problèmes avec mon ancienne version CS.
    created by jmlevy <https://forums.adobe.com/people/jmlevy> in Forums en français - View the full discussion <https://forums.adobe.com/message/7498835#7498835>
    La première chose à faire est de vérifier si un des fichiers placés dans le document InDesign ne comprend pas de caractères « interdits » dans son nom (barre oblique, deux-points, etc.)
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7498835#7498835 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7498835#7498835
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Forums en français by email <mailto:[email protected]ed.jivesoftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=20 13>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Bjr, quand je branche mon Ipod Touch 1g a l'ordinateur, Itune ne le reconnais pas. Que dois-je faire? Et j'ai changer le cable d'alimentation, et et toujours des problèmes de rechargement!!!!!

    Bjr, quand je branche mon Ipod Touch 1g a l'ordinateur, Itune ne le reconnais pas. Que dois-je faire? Et j'ai changer le cable d'alimentation, et et toujours des problèmes de rechargement!!!!!

    Google translate:
    Bjr, when I plug my iPod Touch 1g computer, Itune does not recognize. What should I do? And I change the power cable, and still have problems and reloading!!
    See:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Also try another computer to help determine if you have a computer or iPod problem.
    Does the iPod work OK
    Does the iPod charge?

  • Problèmes avec OS X Mavericks

    Bonjour,
    Heureux propriétaire d'un Mac book Pro depuis à peu près une année, jusqu'ici j'avais pas du tout de soucis (ne serait-ce que le moindre Bug) avec mon Mac ni avec la version pécédente de l'OS X (Mountain Lion)... celà dit depuis peu j'avais décidé de mettre à jour mon OS pour migrer vers la version Mavericks chose que je commence sérieusement à regretter!! ... des messages d'erreurs récurrents pour donner l'autorisation au Cloud et au trousseau, avec des problèmes d'administrateur!! chose qui a été reglée par assistance téléphonique. Et dernierement un Bug bizarre  à répétition lors de la fermeture de la session invité: le Mac plante après fermeture de la session et on retrouve un écran tout gris avec le petit signe d'attente qui tourne en rond continuellement, après quoi il faut faire reset pour redémarrer le Mac.
    Je me demande est-ce le prix de la gratuité ? est-il nécessaire de sortir comme ça une version à la va vite avec quelques gadgets juste pour une question de Cloud et d'unification des iDevices?
    En tout cas personnellement je ne retrouve plus le sérieux d'Apple d'antan!! moi même étant utilisateur des iDevices depuis leurs sorties !!
    Cordialement.

    Just searching on écran gris check out this page
    http://support.apple.com/kb/TS2570?viewlocale=fr_FR&locale=fr_FR

  • Trois problèmes de compatibilité avec AE CC

    Configuration: Windows / Chrome 35.0.1916.153
    Marque : Sony VAIO
    Edition : Windows 8.1
    Processeur : Intel(R) Pentium(R) CPU 2117U @ 1.80 GHz
    Mémoire : 6 Go
    Système : 64 bits, processeur x64
    Carte graphique : Intel (HD) Graphics version 3.0
    Bonjour,
    Je rencontre trois problèmes de compatibilité avec AE CC
    1ère fenêtre qui s'affiche lors de l'ouverture d'AE :
    "Le lancer de rayon sur le GPU nécessite une carte graphique NVIDIA approuvée et CUDA 5.0 ou version ultérieure...."
    2ème fenêtre qui s'affiche lors de l'ouverture d'un template AE :
    Ce projet doit être converti depuis la version 10.0x388 (Windows 64). Le fichier d'origine restera inchangé
    3ème fenêtre qui s'affiche à l'ouverture du template AE :
    Les dépendance de calque suivantes sont manquantes : Calque de texte : famille de polices : "TypoSlabserif", Style de police : "Light"
    J'aurai souhaité savoir si il y a des solutions aux différents problème que je rencontre.
    Je vous remercie d'avance.
    Bien cordialement

    Bonjour Prooffice, En attendant la réponse d'un expert, voici la mienne dont le point 1.  ne te réjouira sans doute pas beaucoup. Mais tu auras des éléments de réponse. 1. Marque : Sony VAIO Carte graphique : Intel (HD) Graphics version 3.0 "Le lancer de rayon sur le GPU nécessite une carte graphique NVIDIA approuvée et CUDA 5.0 ou version ultérieure...." Avant d'installer un logiciel, il est toujours utile d'aller voir la compatibilité avec son matériel. J'ai aussi un Vaio avec une carte graphique ATI et dans les deux cas ces cartes ne sont pas compatibles avec le lancer de Rayon, c'est à dire avec la vraie 3D (via Cineware). 2.Ce projet doit être converti depuis la version 10.0x388 (Windows 64). Le fichier d'origine restera inchangé. Cela veut simplement dire que le template est un projet réalisé avec une version antérieure d'AE. Il suffit de dire OK et ensuite tu pourras écraser le projet initial, ou le sauver dans la version CC sous un autre nom ou même le sauver en version CS6. 3.Les dépendance de calque suivantes sont manquantes : Calque de texte : famille de polices : "TypoSlabserif", Style de police : "Light" Ce message veut simplement dire que le template comporte des polices qui ne sont pas installées sur ton Vaio. Il faut donc les chercher sur le net ou sur le Typekit d'Adobe et les télécharger après avoir fermé ton projet. En principe à la réouverture de ton projet, il retrouvera les polices installées. Je dis en principe car il m'est déjà arrivé, qu'il ne les retrouve pas, il faut alors sélectionner le texte un à un (les polices qui n'ont pas été téléchargées sont entre crochets), aller dans l'onglet caractère (= police) et après avoir trouvé la police nécessaire, cliquer dessus pour l'attribuer au texte. Tu peux aussi choisir une police qui te convient. Pour plus d'infos, il faut  prendre un peu de temps et suivre quelques tutos de base sur l'utilisation d'aftereffects. Bonne journée, Andres

  • Problème d'export depuis file d'attente de PPro vers AME

    Bonjour,
    Depuis quelques temps j'ai un souci avec PPro et AME. Quand je veux réaliser un export depuis la file d'attente de PPro vers AME, AME s'ouvre, mais PPro plante et ne répond plus!
    J'ai tenté de contacter l'assistance qui m'a demandé de tenter de créer un compte local sous windows 8.1 64b, et de voir si le problème perdurais.
    Apparemment non. Mais auparavant je n'avais aucun souci!
    D'autre part, à chaque ouverture d'une sessions PPro, mon espace de travail est complétement désorganisé, je suis obligé de le réinitialiser à chaque fois.
    Quelqu'un aurait une ou plusieurs solutions à ces problèmes récemment apparus?

    Tout d'abords, merci pour vos réponses, ça fait plaisir
    Les VIs qui sont appelés par référence (ici D-MGR Journaux.vi) doivent être ajouté manuellement dans le Builder. Pour faire ça, dans "Sources Files" de ton Build, tu dois les mettre dans la liste "Allways included"
    C'était déjà fait !
    ... Et juste un truc, le chemin change entre le mode développement et le mode exécutable. C'est peut-être ça le problème.
    Essaie d'appeler les VIs avec récupération du chemin dynamique comme dans l'image annexe.
    Comme ceci, ça marche en local très bien, mais pas en exécutable (dans le sens ou la face-avant de s'ouvre pas...)
    Donc le problème ne vient pas du "lancement" mais plutôt de l'affichage. Parce que je pense que le vi tourne mais sans la face-avant affiché.
    Dans le vi appelé (D-MGR-Journaux.vi) voici par quoi commence le code, pour forcer l'affichage de la face avant. (Sur les autres vis ça semble fonctionner).
    J'ai même tenté le simple noeud de propriété "État" de la face avant que le met à Standard. Mais même en éxecutant ça ne fonctionne pas, face avant toujours fermée.
    peut-être as-tu utilisé la commande "create sub-vi"
    Dans ce cas, les terminaux se placent à "la distance" qu'ils avaient lors de la sélection.
    Avec "create sub-vi" ... point de vue code, aucun soucis ... mais le résultat graphique n'est pas toujours parfait (il faut le re-travailler)
    Je passe par le menu "Edition > Créer un extrait de VI à partir de la sélection". Même sans sélectionner les fils d'erreur en entrée et sortie, il les reprends et les places là ou y'a une autre fonction ou un tunnel si c'est dans une structure (boucle ou condition). ça serait bien qu'il fasse un "nettoyage" du code sélectionner et des commandes/indicateurs ajouter, avec un prévisualisation. Car des fois, c'est un peu n'importe quoi ^^.

  • Que faire pour résoudre les problèmes de ventilateur-chauffe-décharche de batterie ? Vidé NVRAM, ouvertures automatique et quitter appl. déjà fait...

    Depuis des mois, je n'arrive pas à résoudre le problème de chauffe de mon macbook pro, si ce n'est temporairement en vidant la mémoire NVRAM.
    Dernier problème en date (lié ?) demande de réparation par Disk Utility en redémarrant l'ordi comme pour faire une réinstallation. Résultat : plantage complet, impossible de réinstaller un nouveau système - Lion 10.7.8 ou 10.8 (page noire, caractères blanc et demande de redémarrer).
    J'avais essayé une réinstallation à partir d'une sauvegarde : même résultat.
    Problèmes liés ou séparés ? Que faire ?

    Quelle est la version de ton MBP?
    J'ai rencontré des soucis de surchauffe liés à la carte graphique, entraînant le remplacement de la carte mère, sur des C2D.
    Sinon, as-tu également fait une RAZ de SMC?
    Voir ici http://support.apple.com/kb/HT3964
    Ou ici http://www.macbidouille.com/news/2011/04/20/de-l-interet-de-faire-un-reset-smc-d e-son-mac-defaillant
    Sur mon Mac C2D qui présentait les mêmes symptômes depuis Mavericks, ça a réglé la question.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I currently have iPhoto '08 version 7.1.5 and need to update. However, will I loose any of my saved calendars or books?

    I currently have iPhoto '08 version 7.1.5 and need to update. However, will I loose any of my saved calendars or books?

    In gereral no - iPhoto '09 and iPhoto '11 both have the same themes as iPhoto '08 - there may be some changes necessary depending on themses used, fonts user, etc
    Before upgrading be sure you have a good backup in cae something goes wrong
    LN

  • Is it possible to change the version of Flash Player that Adobe Reader 9 uses?

    I'm currently attempting to put some flash content within a pdf using the new Rich Media extensions.  I have a working Flash .swf  that uses some of the newer methods that only Flash Player 10 supports.  The file can run on its own within Flash Player 10, but inside Adobe Reader 9 the flash player version is set to WIN 9,0,159,0 and the .swf file does not work.  Is there any way to change the version of the Flash Player used in Adobe Reader 9?

    Try code like this:
    <pre><nowiki>#window-controls .toolbarbutton-icon {
    width: 25px !important;
    height: 25px !important;
    </nowiki></pre>
    The three buttons have these IDs:
    <pre><nowiki>#minimize-button
    #restore-button
    #close-button</nowiki></pre>

  • Mass Changing a Version Name

    Is there a way to select a group of photos and mass change the Version Name? For instance, I have multiple pictures of Germany that currently have a version name of IMG_XXX.JPG - I'd like to change all these to just Germany.

    This advise works if you didn't give the photos a version name during importing . I gave about 160 photos the wrong version name due to my failure to check. when i imported, it listed my previuos version name from other photos. now i try a batch change but it only adds the new version name to the one i don't want ,I've tried replace instead of append with no luck. any advise to delete existing version name and add a new version name. wayne

  • OWB Change Management/Version Control Best Practice

    Hi
    I am about to start developing a data warehouse using OWB 10g R2, and I've been doing quite a lot of research into the various deployment/change management/version control techniques that can be used, but am still unsure which is the best to use.
    We will have 2-3 developers working on the project, and will be deploying from Development, to Test, to Production (each will have a separate repository). We want to be able to easily identify changes made between 1 release and the next to have a greater degree of control and awareness of what goes into each release. We also wish to use a source control system to track changes (we'll probably use SVN, but I don't think that the actual SCS tool makes a big difference to our decision at this point).
    The options available (that I'm aware of), are:
    1. Full MDL export/import.
    2. Snapshot MDL export/import.
    3. Manual coding of everything using OMB Plus.
    I am loath to use the full MDL export/import functionality since it will be difficult, if not impossible, to identify easily the changes made between 1 release and the next.
    The snapshot MDL export/import functionality is a little better at comparing releases, but it's still difficult to see exactly what has changed between 1 version and the next - particularly when a change to a transformation has been made. It also doesn't cope that well with tracking individually made changes to different components of the model.
    The manual coding using OMB Plus seems like the best option at the moment, though I keep thinking "What's the point of using a GUI tool, if I'm just going to code everything in scripts anyway?".
    I know that you can create OMB Plus code generation scripts to create your 'creation' scripts, but the code generation of the Alteration scripts seems that it would be more complicated than just writing the Alteration scripts manually.
    Any thoughts anyone out there has would be much appreciated.
    Thanks
    Liffey

    Well, you can also do per-object MDL exports and then manage those in your version control system. With a proper directory structure it would be fairly simple to code an OMB+ Script that scans a release directory tree and imports the objects one by one. I have done this before, although if you are using OWB as the primary metadata location for database objects then you have to come up with some way to manage object dependency order issues.
    The nice thing about this sort of system is that a patch can be easily shipped with only those objects that need to be updated.
    And if you force developers to put object-level MDL into your version control system then your system should also have pretty reporting on what objects were changed for a release and why.
    At my current job we do full exports of the project MDL and have a deployment script that drops the pre-existing deployed version of the project before importing and deploying the new version, which also works quite well - although as you note the tracking of what has changed in a release then needs to be carefully managed elsewhere. But we don't deploy any of our physical database objects through OWB. Those are deployed from Designer, and our patch script applies all physical changes first before we replace the mappings from the OWB project. We don't even bother synching the project metadata for tables / views / etc. at deployment. If the OWB project's metadata for database objects is not in sync with Designer, then we wind up with deployment errors. But on the whole it works pretty well.

  • Troubles with ACR 8,3 (Mac) - Problèmes avec Camera Raw 8,3

    Hi
    I installed the ACR 8,3 and I face several troubles (I am working with CS6)
    I downloaded and installed ACR 8,2 which was OK.
    But ACR 8,3 is still there and opens by default.
    How to get rid of it?
    Thanks for your help
    Hervé
    Bonjour à tous,
    J'ai récemment installé la version 8,3 de Camera Raw pour Mac et je rencontre plusieurs problèmes (je travaille avec CS6).
    J'ai téléchargé et installé la 8,2 qui fonctionnait correctement.
    Mais la 8,3 s'ouvre par défaut.
    Comment la désinstaller ?
    Merci de votre aide.
    Hervé

    here's info on acr, http://meefirst.blogspot.com/2012/07/manually-installing-adobe-camera-raw.html

Maybe you are looking for