Problemes with the theme of the portal

Hi,
we have the problem that just the portal header load with the logo, the rest of the portal is white.
The 1st and 2sd doensn't load, also the content doens't load.
When we delete the temporary files it workes for an few hours, then the same probleme came back.
We use EP7 with SPS 14 and the probleme is only with IE 6.0.2800.1106 and with IE 7.0.5730.
With Firefox3 we have no problems.
Edit:
We have solved our Problem,the Problem was the EPCM was undefined
Cheers
Simon
Edited by: eBizStudent on Jul 18, 2008 10:01 AM

Rb,
follow the first method and check the code which you placed has all the functions of tool area. i did the same in our portal by merging tool area and masthhead area. follow these two links to solve this
[How to Add a New Link in the Masthead that Will Open an iView|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d07bf112-1705-2a10-1a9f-d0a705e550fa?QuickLink=index&overridelayout=true]
[How to Merge the Masthead and the Tool Area|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f058ef9c-b211-2a10-4fad-8b88d5a1fe74?QuickLink=index&overridelayout=true]
Regards
mahesh

Similar Messages

Problem with the portal on 64bit computer(s)

None of the replies fixed the issue but after doing more troubleshooting I am starting to narrow the issue down. I am going to start a new post with my new findings.
Hello
Wondering if this is a known issue or not. I am having troubles with windows 7 x64 machines getting a blank page when getting to the portal.
I can get to it just fine on my 32bit machine but when I login on a 64bit machine the silver light part does not load. I have tried adding the site to both trusted and/or local intranet zones with no change.
If this a known issue is there a work around?

You would need Silverlight for the 64bit browser, which I am not sure even exists. You probably have Silverlight for 32bit browser installed and working fine.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->

I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

Problem with the creation of the _pageflow folder in the portal project

Hi,
I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
Please help.
Thanks & Regards
Prakash.

Hi Dmitry,
What state are the tasks in? Are they in Active, Running, or Completed? There will only be output files if the tasks are in state running or completed.
Additionally, what is the status of the pool which the tasks ran on? If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost. This is because the files of the tasks reside on the VM which ran
the task.
Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
here - it also has some code snippets for how BatchExplorer performs the operations that it does.
Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

HT4972 People cannot hear me properly on my iPhone 4, although I can hear them very well. Would upgrading to iOS 5 perhaps sort this out, or any other software matter, or is it more likely to be a problem with the microphone?

People cannot hear me properly on my iPhone 4, although I can hear them very well. Would upgrading to iOS 5 perhaps sort this out, or any other software matter, or is it more likely to be a problem with the microphone?

Please... Anyone

I purchased an iPhone 4S on 5/3/2012. Yesterday (7/17/2012) the battery started draining very quickly. I make sure to close all the apps after I finish using them. I haven't had a problem with the battery until yesterday afternoon. Any suggestions?

I purchased an iPhone 4s on 5/3/2012. Yesterday (7/17/2012) the battery started draining very quickly. I always make sure to close and kill any apps after I finish using them. I haven't had any problem with the battery until yesterday afternoon. Any suggestions?
Thanks
Mary

Basics from the manual are restart, reset, restore from backup, restore as new.
Try these.
Here is more info:
Apple - Batteries - iPhone
If all else fails make an appointment at the genius bar.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Problems with the new Pages.

Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.

VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

Problem with the FOR statement.....again!

Hi everyone,
Well I'm still trying to do a car slideshow using external
files and can't seem to see the end. The current movie is here:
http://www.virtuallglab.com/projects.html
I also attach the code. My problem is I had originally set up
an animation with 2 pictures sliding in with some text, and then
wait 4 seconds before sliding out, and then next pictures and text
would slide in and so on, using a setInterval.
The problem is the FOR loop seems to skip the setInterval and
the function "wait", so it just loops quickly and jumps to last
picture, so on the example above, it just slides the last picture
(i=9) and that's it!
Can you not include another function within a FOR statement.
Or is there a way to tell the FOR loop to wait until all motion is
finished?
Any help greatly appreciated
import mx.transitions.*;
import mx.transitions.easing.*;
for (i=0; i<10 ; i++) {
var picLeft = "pics/"+i+".jpg";
var picRight = "pics/"+i+"b.jpg";
var txtToLoad = "text/"+i+".txt";
this.createEmptyMovieClip("leftHolder",1);
leftHolder.loadMovie(picLeft,i,leftHolder.getNextHighestDepth());
leftHolder._x = -200;
leftHolder._y = 15;
var leftTween:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, 10, 2, true);
this.createEmptyMovieClip("centerHolder",2);
centerHolder.loadMovie(picRight,i+"b",centerHolder.getNextHighestDepth());
centerHolder._x = 180;
centerHolder._y = 250;
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 15, 2, true);
text._x = 600;
myData = new LoadVars();
myData.onLoad = function(){
text.carText.text = this.content;
myData.load(txtToLoad);
var textTween:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 420, 2, true);
myInterval = setInterval(wait, 4000);
function wait() {
var leftTweenFinished:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, -200, 1, true);
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 250, 1, true);
var textTween2:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 600, 1, true);
clearInterval(myInterval);
***************************************************************************************** ***

There is no way to tell a for loop to wait. That is not what
they do.
The entire for loop will execute (if possible, and it doesn't
enter some kind of continuous infinite loop) completely before each
time the frame is rendered.
If you want to spread things out over time you need to use
the setInterval -- but not inside a for loop! If you do that you
immediately set however many intervals as your loop has. In this
case you will also assign the ids for those intervals to the same
variable, effectively overwriting the value so you will never be
able to clear most of those intervals.
So you need to rethink you whole structure. Set up some kind
of counter and limit like this:
var slidesToShow:Number=10;
var curSlide:Number=0;
Then have your setInterval increment the curSlide each time
it is called and check to see if it has shown all of them. That is
where your "loop" comes in.
As for the other part of your question -- yes you actually
have two different issues going on -- again you cannot make a for
loop wait for anything. So no there is no way to pause it while you
wait for your tween to end. But you can be notified when a tween
ends.
Check out the documentation about the tween class in the help
files. There you will find the onMotionFinished event. So you can
set up one of those to start whatever needs to be started when the
tween has finished.
You should also use the MovieClipLoader class to load your
images, because you have no idea how long it will take to load
them. Using that class you get a nice event (onLoadInit) that tells
you when the asset is ready to be used.
Finally I'm thinking you might want to use setTimeout instead
of setInterval. It only goes once, while setInterval repeats
forever. So I would think your algorithm would be something like
this.
1. load external asset
2. when ready animate in and set onMotionFinished handler
3. when motion is finished start loading next asset and
setTimeout for 4 seconds.
4. when 4 seconds is up or the clip is loaded (which ever
takes longer) go to 2 and repeat.
If this is going to be run locally on a hard drive or CD you
won't have any problem with the length of time it takes to load the
external assets, but if it is over the web it will take time.

I am having a strange problem with the awesome bar

The awesome bar/location bar is no longer as awesome as it used to be. When I start typing in an address it seems like it no longer checks through my history and gives a list of possible matches but just gives the stem of an address. For example, if I type in 'goo' it will complete this to 'google.com' if I then append this with an '/a' it will complete this to 'google.com/analytics' but that's as good as it gets, as I say, no list from the history or bookmarks.
I've checked the options and also about:config and all the settings are as they should be, as far as I can tell (and I certainly hadn't changed any of them when it started misbehaving). I've also disabled all extensions and plug-ins.
It's driving my slightly bonkers because I quite often use sites with long addresses and can't remember each of the components of each address. I'd switch to using Chrome but I also use Firebug a fair bit so don't really want to do this.

Hi cowtan, <br/>Sorry you are having problems with the awesome bar.
I imagine the new behaviour may be reversed by changing some pref but I have not looked that up.
Regardless of the new behaviour you seem to have some fault as my awesomebar still gives bookmarked items.
As a troubleshooting step try adding an asterisk in the awesomebar (as first character or anywhere) that should then filter the results in the dropdown list to bookmarked only items, does that work ?
* see [[Search your bookmarks, history and tabs with the Awesome Bar#w_changing-results-on-the-fly]]_changing-results-on-the-fly
You possibly have some extension interfering with the awesome bar, try Firefox in safe mode (but do NOT* at this stage try the Reset Firefox option)
<nowiki>*</nowiki>'''edit''' - personal opinion, if a user; such as you; is knowledgeable enough to use ''about.config'' the easy solution of ''FirefoxReset ''is probably not the best route, as it can have unwanted side effects that are avoidable.
* [[Troubleshoot Firefox issues using Safe Mode]]
Do your bookmarked items appear in safe mode ?
<u>Try a new Profile.</u><br/>The best method for troubleshooting this will be to set up a new Firefox profile, you can then: experiment, troubleshoot, alter settings or extensions installed in that profile without changing and potentially damaging your current profile.
* http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
I suggest to prevent unexpected problems you
* use a sensible name such as test 2012 for the profile name
* ensure an empty folder is used & do not then rename or delete the new profile (instead add or delete shortcuts to it)
* also see http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Hello, I have a problem with the iPod, is that the iPod does not sync all the songs that are on my Itunes. I have 373 songs on the iPod and iTunes 512 in ... What do I do?

Hello,i have a problem with the Ipod,is that the Ipod doesn't sync all the songs in my Itunes. I have 373 songs in my Ipod and 512 sons in my Itunes. What do i do?

Hello,
I take it you haven't unticked any of the songs listed on your iTunes Library? Also have you tried selecting all your songs which you wish to add to your iPod, and dragging them over your Devices "iPod Nano"; and seeing if that copies all songs on to your iPod?
Another idea is just check that your iPod has enough space for the rest of your songs to be added to your device.
Hope this helps.

PROBLEM WITH THE PHONE ORDERS

Hello,
Is there a problem with the orders which are done with an international credit card? I am asking this because my brother and I have been trying to place an order to buy Macbook Pro with Retina Display for 2 days.
We placed 2 online orders with my international credit card. In each order I inputted the international address provided by the Bestbuy web site(10780 Kempwood Dr. - Houston, TX 77043) to the billing address. And I inputted my brother's address in the US to the shipping address. Each time, at first,orders were accepted but after 1 minute we received an email that indicated orders were cancelled. Customer service told me that the shipping address and billing address on my order are same and there might be an issue on the system that causes this problem and suggested me to place the order over the phone. I replaced the order over the PHONE(WITH SALES DEPARTMENT) but again I received two emails, one of them is "We received your email" and the other one is "Your order has been cancelled".You can find the reason of the cancellation in the email below;
We're sorry, but an item on your order placed on June 12, 2014 has been canceled because we were unable to verify your information.
I am really tired of that,it is like a joke.
An authorized person should answer this; does BestBuy accept international credit cards or not?

Hello nbilgin,
Placing orders on BestBuy.com should be both exciting and easy, and I'm disheartened to read that you've run into these difficulties in trying to purchase your new Macbook Pro. Surely, this is not the experience that we strive to provide and I regret very much that you've been disappointed.
Using the information you provided when you signed up for our Community. I was able to locate your orders. I am investigating the situation now and as soon as I have additional details, I will let you know. I'm sorry that I must impose on your patience and good nature in the interim; I should have more details shortly.
I'm very grateful that you wrote to us about this situation.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Problemes with the theme of the portal

Similar Messages

Maybe you are looking for