Problemi Aggiornamento Garage Band 10.0.2

Gentili amici,
sto provando ad aggiornare la versione di Garage Band direttamente dallo store ma dopo aver completato in download, e aver inserito le mie credenziali per completare il download degli utlimi file audio, mi appare questo messaggio che non mi permette di proseguire e completare l'installazione :
GarageBand non è riuscito a completare il download. Verifica la connessione a Internet e riprova a scaricare.
La connessione è pari a 6 Mega effettivi, quindi escludo il problema legato alla connessione.
Precedente versione di Garage Band la 6.0.5
Potreste gentilmente aiutarmi?
Sistema Operativo OSX Mavericks 10.9.2
Grazie
PS Cliccando sull'icona Garage Band riparte nuovamente l'installazione e non mi permette più di utlizzare l'app.
Andrea

Ho appena fatto l'ennesima riprova seguendo l'iter tradizionale di aggiornamento (cioè semplicemente aggiornandolo dal sito, perché dall'app store non vedo alcun aggiornamento) e ha funzionato. Sul forum americano ho trovato questo, magari ti può essere utile.
I had the same problem with Garageband (not being able to download and install instruments & loops), called the tech. support. They wanted me to do the following:
- Click App store
- Click store on the top bar
- click "check for unfinished download". (at this point, I realized that I started and paused the download of Imovie and I photo earlier)
- Somehow the downloads were completed. (If not, complete all the updates you have started)
- Tech service asked me to run Garageband, said it will download the "instruments and loops" and work normally, which was actually the case.
- Tech. service explained that these softwares are a complete package (Ilife), so the paused updates caused the problem.
I hope it works for you and for the other people having the same problem as well.

Similar Messages

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

M-Audio Fast Track Ultra Problem with Garage Band

GB is not recognizing my Fast Track unit. Sometimes it does, other times it doesn't. I uninstalled and reloaded drivers as well plugging it in before/after starting up, before/after opening GB. I even tried changing my USB cable. It is very erratic. Any suggestions or anyone else have similar problems?

M-Audio's Fast Track Ultra appears to have some serious issues with the drivers. The unit does not like to stay connected or communicate with your PC. See this thread on the M-Audio site http://forums.m-audio.com/showthread.php?t=1174
I would NOT recommend this product until they get their problems figured out. You quickly will pick up on the thread that M-Audio's solution to an acknowledged hardware issue is to have the customer start messing with their system to see if it corrects the problem. Then if it doesn't, you have the privilege of calling their technical support. One poor chap from Costa Rica was put on hold for 41 minutes and was still waiting. Poor guy is probably still waiting.
I have read through many of the postings and did not find one person who was able to get their problem resolved; not one. Some of the folks had incredible patience with all of the "fixes" that M-Audio staffers were tossing out. They dutifully followed all advice but to no avail. I have to admit, M-Audio must have integrity because they are showing the postings on their website.

Uninstall Delete World Book and Garage Band without problems i.e Iphoto

With only 30GB, I want to free up space. I am concerned that by just dragging these two files to the trash, I will have problems (as mentioned in other discussions).
Can someone tell me "definitively" how to accomplish this without problems. According to the info on file report, these two programs and associated files take up probably 3-4 GB.
Thanks so much in advance for any guidance.
Skip

Skip
I know of no problems with iPhoto and trashing World Book.
Hwever, some folks have had problems with iPhoto when Garage Band is trashed - it fails to launch.
My suggestion is to keep Garage Band (the app itself, minus language resources is only about 80MB) but by all means trash the associated Sound Loops - which is where the Gigs of space go. In fact, trashing the app won't remove these - they're in an Application Support Folder.
Regards
TD

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanks

skim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Garage band (2.0.2) and MIDI - weird sound problems

hi, i have just bought a new keyboard (Yamaha PSR 450), as well as a USB-to-MIDI cable, to connect my keyboard to my mac, for garage band. the cable is "m-audio midisport UNO" (MIDI IN/MIDI OUT-to-USB).
when i connect my keyboard to my mac, open up garage band and try to play or record and play, the sounds coming out of garage band are weird. the track was the default software track (piano), but when i played, only about 30% of what i played came out right, the rest was either this (very) high-pitched piano sound or nothing at all, and at random intervals too, e.g. i press 'middle c', and no sound comes out my computer, i press it again, this time it plays, but high-pitched. i press it again, now it plays right etc. etc. there doesn't seem to be any pattern. also, most of the time when it actually played the 'middle c', once i let go, the sound continued for ages, like i had a huge sustain on or something.
what's more weird is, if i have a recording on my keyboard (it has 6 tracks) and press play, the sound comes out perfect on garage band, so it's just when i play "live".
I've been messing around with settings on both my keyboard and mac, but nothing seems to work.
i read in the Yamaha manual that if the USB - MIDI cable is longer than 15ft, there can be "noise and data errors". this sounds exactly like what im getting, but the cable is not 15ft. its about 7-8ft. maybe the cable is low-quality? it cost me £32! -_-
any info or help would be extremely appreciated.
thanks
peace

hey, thanks.
i downloaded the latest driver, but it still has the same problems.
maybe my MIDI setup is wrong.
when i open my MIDI setup panel in the utilities folder, it has:
IAC Driver (don't know what this is, can't really change anything anyway)
Network (again, i don't know what this is for, i havent touched anything)
USB Uno MIDI Interface. i can't change any info on this either, but i clicked it and then pressed "Test Setup" and this short continous bleep noise went off, untill i clicked "Test Setup" again to turn it off. im guessing this means it's working?
i even double checked that the MIDI IN/OUT plugs were in the right sockets in my keyboard!
either garage band doesn't properly support my keyboard or the cable
or
the cable is low-quality and i need to get the recomended yamaha one.
i cant think of anything else that could be wrong. of course i know next to nothing about MIDI so there may be loads of things i have not figured out yet.
are there any free/demo MIDI music software for mac i could download to test it?
thanks for helping
peace

Sample Rate Problems going from Logic to Garage Band

I've downloaded the Trial Version of Logic Express. When it launched it changes the i/o sample Rate that is required by Garage Band (I'm using a digi002 i/o). The result is that garage band plays back at a fraction of it normal rate (sounds like crap).
It wasn't a problem until the trial ran out on Logic Express. I could change the sample rate back inside Logic. Hummm ... what to do? I don't see any place to change the rate in the garage band preferences or in the core audio interface. Any suggestions would be appreciated.
G4 1.25 dual, mirror Mac OS X (10.4.6)
G4 1.25 dual, mirror Mac OS X (10.3.9)

updated

Sample Rate Problems going from Garage Band to Logic Express

I've downloaded the Trial Version of Logic Express. When it launched it changes the i/o sample Rate that is required by Garage Band (I'm using a digi002 i/o). The result is that garage band plays back at a fraction of it normal rate (sounds like crap).
It wasn't a problem until the trial ran out on Logic Express. I could change the sample rate back inside Logic. Hummm ... what to do? I don't see any place to change the rate in the garage band preferences or in the core audio interface. Any suggestions would be appreciated.
G4 1.25 dual, mirror Mac OS X (10.4.6)
G4 1.25 dual, mirror Mac OS X (10.3.9)
G4 1.25 dual, mirror Mac OS X (10.4.6)

I've never had any such problem with Logic Express. GB files just load up, and work fine. Did you change anything in Logic Express? There are setting for that there, but even songs I open after I changed LE to 24 bit, work fine.
Wait, are you saying LE is changing the sample rate, and then it stays that way when you open GB? Hmmm, What do you have LE set for? I think mine is set at 24/96, but I'd have to look to be sure. But I am not using the same interface as you are. It might be something you just have to live with. Have you tried posting this in the LE7 forum? Maybe one the gurus there knows what you can do.
Oh, and I am using GB 2, not GB 1, but I am not sure that is relevant.

Con la nuova versione di Garage Band ho problemi a salvare i file come anteprima iLife o a salvarli su iTunes senza che me ne tagli un pezzo, qualcuno mi sa dare qualche soluzione?

Con la nuova versione di Garage Band ho problemi a salvare i file come anteprima iLife o a salvarli su iTunes senza che me ne tagli un pezzo, qualcuno mi sa dare qualche soluzione?

Permissions problems with sound track pro and garage band

I am having a problem with the loops and sounds in Garageband and SoundTrack Pro. When I attempt to use a sound in garage band, I get an error "an eror occurred result code = -5000 File = Garageband-Temp-54E281E". When I do a search there are about 58 separate folders with loops or effects in them. If I isolate the one I want to use and change the permissions of the folder to everyone read and write I can use the sound, but I don't want to manually change the permissions for 58 seperate folders. I ran repair permissions using disk utility but that did not fix it. Any suggestions, I have a lab of 22 imacs, if it was just one I would just fix the permissions on it but for 22 separate machines, I would like some automation. Thanks in advance for your help.

I'll also add that I'm pretty sure I used this microphone along with the iMic USB a few years ago when I had my 'quicksilver' Mac G4 and it worked with that machine. As noted above, I've tried it with both a 2 channel and both the mono channel settings in Garage Band; but I am using a 1/4" to 1/8" jack adapter in order to plug into the iMic's 1/8" receptacle. The adapter is stereo to stereo, meaning it has both contacts for r & l. That shouldn't make a difference should it? In my experience if you are using mono equipment (like a single microphone) the sound will still be delivered through one of the two channels.

Garage Band Problem: I can not open my existing files on Garage Band. They appear in a light gray. I can only open recent files. How do I open the existing files?

I would like help opening my existing files in Garage Band? I recorded 22 songs earlier this month which I want to edit, but I can not open these files.
The only files I can open are the more Recent files.
Please advise me what to do?
Thanks,
Bonnieta

It's not an apple solution but you can try MailRaider by 45 RPM software. I have not used it personally but it was one of the hits that came up when I did a google search for .msg on Mac.
Hopefuly the link posts but if not then just head over to macupdate and do a search for MailRaider
http://www.macupdate.com/app/mac/31845/mailraider
Hope this helps.

Garage Band 10.0.2 problem VST

Hello there,
I was surprises this morning, with the update Marverick 10.9 to have a new Garage Band.
However, it's totally different from where my precious Garage Band and my VST (Miroslav Philharmonik) have disappeared, and I can't edit or access ... I don't know how to do, if someone want to helot me please ?
Thanking you.
[Bonjour, J'ai eu la surprise ce matin, avec la mise à jour Marverick 10.9 d'avoir un nouveau Garage Band. Cependant celui-ci est totalement différent du précédent où mes VST (miroslav philarmonik) ont disparu, je ne peux plus les éditer ou y avoir accès... J'ignore comment faire, si quelqu'un veux bien m'aider s'il vous plait ?
Vous en remerciant.]

I have found audio unit and DLS, but what should i DO NEXT ?
In the panel, select the VST plug-in. (where it says "Banque de sons")
If your VST is not showing there, it is either not installed correctly in the ~/Library/Audio/Sounds/Banks/ folder, or it is incompatible with the current GarageBand version.
GarageBand 10.0 can only use 64bit VST plug-ins, that conform to the "sandboxing" requirements. Check at the manufacturer's site, if you have the newest versions of your plug-ins, or if there are updates available. If yes, update. (GarageBand for Mac (v10.0): Unexpected behavior with Audio Units plug-ins)

Problem with guitar lesson nr.7 Garage Band '09

Garage Band '09 cannot complete download of 7th guitar lesson. What can I do?

Ok now it runs perfectly after I have repaired permissions.

Non ricordo l'account per scaricare aggiornamento di garaGE BAND E IPHOTO. COME FARE?

non ricordo l'account per scaricare aggiornamenti di garage band ed iphoto. come posso fare?

Disclaimer - Per me le Comunità di supporto Apple sono uno internazionale utente al forum assistenza tecnica tra utenti. Come un uomo dal Messico la mia prima lingua è lo spagnolo. Non parlo inglese, comunque io scrivo in inglese con l'ausilio del controllo ortografico di Mac OS X e controlli grammaticali. Vivo anche in una cultura molto diversa da quella che si trova nella maggior parte delle nazioni del mondo 1 °, come ad esempio che nei due paesi dominanti del Nord America. Linguaggio scritto non ha alcun tono. Quando offre consulenza nel ASC, i miei commenti non sono fatti per essere qualcosa di più che utile e certamente da non prendere come insulti.
L'ID Apple che è stato utilizzato per registrare il Mac è originariamente l'ID utilizzato per aggiornare le applicazioni iLife in dotazione con il Mac.
Hai comprato questo nuovo Mac, o hai comprato usato? Se quest'ultimo viene usato, quindi le applicazioni di iLife sono registrati al proprietario originale.
(Google Translate)

Garage Band is recognizing ".aif" format loops but not ".aiff" format loops

All of the ".aif"-formatted loops (from Jam Packs, etc.) are showing up fine in the Loop Browser, but other loops I bought from third-party vendors that are in the ".aiff" format are not showing up at all in the loop browser. They are all in the same correct folder for loops on my system along with the working Jam Pack loops. I tried dragging and dropping a bunch of these loops onto the blank space on an open session based on some advice I read on the internet, and Garage Band processed them (and created new instrument tracks on the screen for each loop) but they did not subsequently show up in the loop browser as I had hoped. Do I need to reformat these to ".aif" somehow? Any help with this would be greatly appreciated.
Thanks.

Just to follow up, draggging the loop folders into the loop browser didn't work exactly on its own, but I got it to work in the following manner. First I went to the finder and deleted the apple loop indexes in each of the two locations where apple loops are stored in my computer (note to Apple: why multiple different folders for Apple Loops?). Then I dragged all of the Apple Loops that were stored in the second loops folder (in the Library under "Audio") to the first Apple Loops folder. Then I dragged both entire Apple Loops folders (required even though the second one was now empty) into the loop browser. Upon dragging the second one in, Garage Band automatically began reindexing my loops and then everything showed up in the loop browser correctly, finally. Apparently both (or all) locations where Garage Band stores loops must be individually dragged into the loop browser to trigger the reindexing process. This process was harder than it should be and I feel like it represents an annoying bug in Garage Band, in addition to the help from this post I also had to google research the problem for quite some time to figure out this process.

Problemi Aggiornamento Garage Band 10.0.2

Similar Messages

Maybe you are looking for