Problems about Hold Data

Hi All,
I'm confused by the usage of "Hold Data" menu. I ran the t-code SE16 to check the table T002. In the selection screen I input "DE" in the SPRS field and then click on the menu System -> User Profile -> Hold Data. System indicates that "Data was held". But the next time when I enter the selection screen of table T002 in the same session, the SPRS field is still empty. Does anybody know the reason?
Thanks + Best Regards
Jerome
null

Hi Jerome,
If Hold data is not activated in the screen attributes, the menu entries like hold data, set data will have no effect.
Have a look at below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/07c05878a711d2958a0000e8353423/content.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Similar Messages

A problem about filter data in RPD by Roles

Dear All,
I face a serious problem.
How I set the filter in RPD if there are several member I dont want to receive in different Generation?
Assume I want receive A, B in Gen4, Accounts. C in Gen5, Accounts. And D, E, D in Gen6, Accounts?
I tried to set it up in a few way, but the result didnt come out right. Some Gen4, Accounts should show but it didnt.
Best Regards,
Martin

Hi Srihari,
Thanks for your reply.
And also I have tried with Object Model to display the report.
Here field catalog will not come into place.
Only the following lines involves for the ALV.
Yet the issue comes in the same way.
cl_salv_table=>factory( importing r_salv_table = gr_table changing t_table = IG_ALV ).
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'EDI IDOC').
gr_columns = gr_table->get_columns( ).
gr_table->display( ).

Problem about "huge" data

does oracle spatial can work with huge data, i am no trying to do overlay on two geometry column, one of them has more than twenty thousand record. I have valid these data but when i do overlay with SDO_GEOM.SDO_INTERSECTION() then the system halt without any responce, why ?????

I've found new solution. Use WebDocument for migration

Help! problem about jstl sql with "LIKE?" in query

Hi All,
I have a problem about getting data by using "LIKE" in my sql statment.
here is my case:
<sql:query var="tmp">
SELECT ...... FROM ...
WHERE a LIKE ?
<sql:param value="%${param.a}%"/>
</sql:query>
Once I used "LIKE" keyword, the query failed to use this critica.
and couldn't find any match cases
thx or help
Micheal

besides, i found that:
this works:
"AND a.block LIKE '%' + 'a' + '%'"
but these don't work:
"AND a.block LIKE '%' + 'a' + '' + '%'"
or
"AND a.block LIKE '' + '%' + 'cp' + '%'"
or
"AND a.block LIKE '%' + 'cp' + '%' + ''"
it seems '' is the casue of error... so strange, anyone has idea?
micheal

Problem About Date Format in Dashboard

Hi All:
I still have problem about date format in dashboard and dashboard prompt. When I use cast(dealdate as date) in dashboard prompt(coloumn formula of deal_date) and filter view(In edit view of filter coloumn formula) Then It converts the date format from mm/dd/yyyy to yyyy-mm-dd But I want format in dd-mm-yyyy.
ANd also one problem more that is when I use cast function in filter coloumn formula then how I give alias to it. Because it shows same like that cast(deal_date as date) on dashboard filter view.
Pluzz help me to solve this problem
Haroon

Changing the ini files should change the date format. Have you amended the correct instances of the date format? In dbFeatures there is one for every ODBC connection.
For example in my DBFeatures.INI
[ DATA_SOURCE_FEATURE = ODBC_300 ]
DATE_FORMAT = 'dd-mm-yyyy' ;
     TIME_FORMAT = 'hh:mi:ss' ;
     DATE_TIME_FORMAT = 'dd-mm-yyyy hh:mi:ss' ;
     IDENTIFIER_QUOTE_CHAR = '"';Also a file on the presentation side in OracleBI \web\Config called localedefinitions.xml.
Inside that there appears to be defaults for localisations - maybe it is possible to amend your locale in the Administration settings of the dashboard.
However, I haven't tried this sorry.

Have problem about grant assignment in Student Master Data

have problem about grant assignment in Student Master Data
i want to change grant detail in Student Master Data when i choose disbursement type to Pay Fixed Amount
and then go to Grant Evaluation Run it have result
But when i choose another disbursement type such as
1. Pay Up To a Certain Percentge
2. Pay Certain Percentage Up to a Certain Amount
3. Pay Up to a Certain Amount
and go to run Grant Evaluation it can run but not have result
I need help T_T i don't know why i can't change or i miss something

hello experts,
Our problem is still not fixed, but we have contacted SAP to have a look at this problem. In the mean time we have created a new way to calculate the grants by doing no check at all, because our client don't want to have prerequisites yet.
Therefor we made a custom function module from PMIQBP_GR_COND_EVALT_01. If the boolean ev_xok is true the system will calculate and post the grant amount.
Good luck and I'll keep you posted.
Kind regards,
Steve de Klonia

Problems by holding the typed Values in Fields by using "LEAVE TO SCREEN"

Hello Experts,
I have created a Dynpro with many field.
Some Fields are Fields without searchhelps and a part of this Fields have searchhelps.
One of this Field has a special function.
It is a Field where you can choose a key value ( an ID number) about the searchhelp.
After choosing I get the other values for this ID-Number in the returnparameter of the Searchhelp function
( values like name, surname ....)
I set this return values to the Fieldvariables in the PBO.
For jumping to PBO I use "Leave to Screen" to the same screen.
But the Problem is I can not hold the values wich I have typed before in the Dynpro Fields (Field without serachhelps).
After using the Field with the Searchhelp (for ID) the Fields with typed Value go away.
Please Hel me . Thanx in Advance
Cetin

Hi,
In SE80 double click on your Screen Number and go to the Attributes Tab and Select Hold Data Check box,
The Help Obtained from F1 Help is as follows, Kindly note this is Copied from F1 Help provided by Standard SAP,
You too can Check it out
"SAP Says --->
If you activate this option, the following functions are supported for
the screen at runtime:
System -> User profile -> Hold data
-> Set data
-> Delete data
The Hold data function allows you to hold onto any entries you have made
on the screen. When the screen is next processed (even in a different
mode), the system then automatically redisplays the data in the input
fields.
If the option is not activated, these functions are ineffective at
screen runtime.
The "Hold Data" option is not supported for include screens
(subscreens). The automatic insertion of held data is exclusively
controlled by the main screen.
Cheerz
Ram

HT1414 It has some problem about my iphone. When I turn off the phone and then turn on, it shows the screen of apple page and then show the loading page many times. What happen with my iphone?

I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?

Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore

Can you help me about change data captures in 10.2.0.3

Hi,
I made research about Change Data Capture and I try to implement it between two databases for two small tables in 10g release 2.MY CDC implementation uses archive logs to replicate data.
Change Data Capture Mode Asynchronous autolog archive mode..It works correctly( except for ddl).Now I have some questions about CDC implementation for large tables.
I have one senario to implement but I do not find exactly how can I do it correctly.
I have one table (name test) that consists of 100 000 000 rows , everyday 1 000 000 transections occurs on this table and I archive the old
data more than one year manually.This table is in the source db.I want to replicate this table by using Change Data Capture to other stage database.
There are some questions about my senario in the following.
1.How can I make the first load operations? (test table has 100 000 000 rows in the source db)
2.In CDC, it uses change table (name test_ch) it consists of extra rows related to opearations for stage table.But, I need the orjinal table (name test) for applicaton works in stage database.How can I move the data from change table (test_ch) to orjinal table (name test) in stage database? (I don't prefer to use view for test table)
3.How can I remove some data from change table(name test_ch) in stage db?It cause problem or not?
4.There is a way to replicate ddl operations between two database?
5. How can I find the last applied log on stage db in CDC?How can I find archive gap between source db and stage db?
6.How can I make the maintanence of change tables in stage db?

Asynchronous CDC uses Streams to generate the change records. Basically, it is a pre-packaged DML Handler that converts the changes into inserts into the change table. You indicated that you want the changes to be written to the original table, which is the default behavior of Streams replication. That is why I recommended that you use Streams directly.

Yes, it is possible to capture changes from a production redo/archive log at another database. This capability is called "downstream" capture in the Streams manuals. You can configure this capability using the MAINTAIN_* procedures in DBMS_STREAMS_ADM package (where * is one of TABLES, SCHEMAS, or GLOBAL depending on the granularity of change capture).

A couple of tips for using these procedures for downstream capture:
 1) Don't forget to set up log shipping to the downstream capture database. Log shipping is setup exactly the same way for Streams as for Data Guard. Instructions can be found in the Streams Replication Administrator's Guide. This configuration has probably already been done as part of your initial CDC setup.
 2) Run the command at the database that will perform the downstream capture. This database can also be the destination (or target) database where the changes are to be applied.
 3) Explicitly define the parameters capture_queue_name and apply_queue_name to be the same queue name. Example:
 capture_queue_name=>'STRMADMIN.STREAMS_QUEUE'
 apply_queue_name=>'STRMADMIN.STREAMS_QUEUE'

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

A problem about calling Labview vi in VB

Hi all:
I meeting a problem about data transfer and parallel operation between VB and Labview.
Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
But the question is :
1. If I use "Call" method of ActiveX in VB, and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
2. I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
3. Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
Does anybody know something about it? Thanks a lot
Message Edited by hanwei on 11-07-2008 03:18 PM
Attachments:
vb_labview_error_message_1.JPG ‏14 KB
VB_to_LV.zip ‏10 KB

I sure hope OP has solved it by now.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Problem in importing data in oracle 10g from 9i backup

Hi ,
Am trying to import data in oracle 10g..but it does not importing constraints, and stop doing anything by the msg.
About to enable constraints.....
after this msg it does not work.
plz help,
Regards,
Neha

Hi Neha,
You have a lot of options. I'll supose you can test first, and you're using an export file.
First forget about the data, think in your database structure. So you can do this:
exp userid=... file=exp_norows.dmp full=y rows=n statistics=none
Now you have the structure of your database. Create the database, in 10g, empty, check you have all filesystem, etc. for you new datafiles. And do the import with parameter ignore=y, you'll see a lot off errors on SYSTEM schema, don't worry about it.
Now you have the structure of you database in 10g. You can take a look in the import log file, looking for some possible errors come from your schemas. so check the objects, and check the schemas.
Bear in mind things like CONNECT role in 9i it's different in 10g, you can't create db_links in 10g with "IDENTIFIED BY VALUES" because you'll get an ORA-00600, etc.
Well, fix all problems on source database (9i) and repeate this procedure until you don't recieve any more errors (not a SYSTEM schema errors).
When you have everything solved, you can try to import the data.
I hope, this method can help you. If you have any problem do not hesitate to ask me.
John Ospino Rivas

Problem with winmail.dat Attachments in our company

First, i did read all Entries in this Community about winmail.dat, but there's no entry for my problem.
We use exchange server 2010 and outlook 2010. All Mails are written as HTML-Mails. There's no RTF Mails in our company.
The problem ist, our cio ist using a ipad with a hotmail mal address and most mails with attachments arrives as winmail.dat on the ipad.
But not all!
I could verify, that a Mail with doc, pdf, xls attachments was opened ok on a iphone4s (with ios6) but showed as winmail.dat on ipad3 (ios6) at the same time!
Has anyone a explanation to this?

Winmail.dat files are attachments sent by Microsoft mail applications (Outlook, Outlook Express or Exchange) on a proprietary RTF format called TNEF (transport neutral encapsulation format).
An e-mail containing an winmail.dat attachment looks like an empty e-mail with only one attachment. The original e-mail information like subject, body and attachments is packed into a single winmail.dat file, which in some cases also receives a generic name like information01.dat.
If you wanna open it, you should download a winmail viewer.
Hope this help u!
<Link Edited By Host>

Problems about Hold Data

Similar Messages

Maybe you are looking for