Problems accessing imovie in photo booth, Problems accessing imovie in photo booth

No icon for movies in photo booth

Maxime Lahousse wrote:
If i try to take a picture in *photo booth* of in *Imovie '11* there is a popup that says:
*No camera connected*
Also in MSN messenger for mac, the option video isn't available anymore.
Can someone please help me? because it's driving me crazy!
Welcome to Discussions, Maxime Lahousse
For any iSight problems, first try restarting the Mac. If the problems persist, try all relevant suggestions from:
http://support.apple.com/kb/HT2090
If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if your built-in iSight still does not work after carefully following all the suggestions in the "How to Troubleshoot iSight" article, and if iSight does not show as a USB hardware device in your Mac's System Profiler utility, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Similar Messages

IMovie and photo cropping problems!!

Hello!
I am making a slideshow for my Grandpa's memorial service, and have many photos where I have placed a title directly on the picture so that they are clear to people watching (year, people in it, etc.)
Here's the problem:
iMovie crops every photo so that in many cases, the titles I placed on the pictures aren't visible!
BTW - the KB effect is turned off, and all photos were imported without the effect.
I have played around with placing the photos on different sized canvasses to see, when imported, which dimensions come the closest to fitting correctly on the iMovie screen. It seems like putting the photo on a 6.5"x4" canvas works best to deal with portraits (gets the whole top and bottom in, leaving black lines on the sides), but I'm wondering if anyone has more definitive information about what size photo can be imported without being cropped. I've got 200 pics to deal with, and if I'm going to resize all of the canvasses, I only want to do it once!!!
Thx in advance for your help!

Hi, Ben
I didn't get your response until after I had played around with the pics some more.
Brilliant minds think alike, though, and I ended up doing basically what you did, using a 1920x1440 canvas (can't remember the inches, and no access to it on this computer).
Just for the record, even with the KB effect turned off, the settings were cropping the photos a little bit because of it (the default import setting for the KB effect was at 1.16, and even with the KB effect off, it was still affecting the photos). When I changed that setting to 1.0, it did make a difference, but putting the photos on a blank canvas and resaving them was really what worked!
Sorry everyone who replied - I tried to give you "helpfuls" and a "solved" for Ben, but my computer keeps giving me an error message!!!
Message was edited by: jen.huffman

Problems with the vba command sendkeys in Access 2013.

Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private user

Hi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problems setting duration for still photos and transitions in iMovie '11

I downloaded iMovie 11 from the Apps Store last night and am trying to make my first movie with it today. I use still photos exclusively.
For most - but not all - I like 5 seconds for photos and for transitions 2 seconds. I do vary this on occasion and so do not check "for all photos' or "for all transitions".
I can't get these settings to work with this version of iMovie. For example, I added a photo (5 sec) then a transition (2 sec) which changed the duration time of the photo - as it should. But when I double clicked the photo, to bring up the inspector window to change the duration of the photo, nothing happened. Then I added another photo. The duration of the first photo increased to 7 seconds and nothing I do seemed to change that.
The time increases seem random: for example, sometimes the time on the still photo increases to 6:29 sec, sometimes to 7 sec.
The duration for the transitions always remains the same - 2 sec; it's the time for the photos that jumps around. And I haven't been able to find a way to get back to 5 sec.
Before posting this, I researched and found an number of earlier posts detailing the same issues.
However, none of these posts had stars to indicate the problem was solved.
Has anyone found a solution or is this a bug that should be reported to Apple?

Interesting!!
I've spent a lot of hours on this too, but I have come up with a different solution perhaps because I like to vary both the image duration and the transition duration in my movies.
Here's my process:
-> Knowing that (a) I want most of the photos to be visible for 5 seconds and most transitions for 2 seconds and (b) that a transition takes half from the photo before and half from the photo after, under File>Project Properties>Photo Duration I chose 7 seconds - each photo will 'lose' a total of 2 seconds from the transitions in front and behind. I did not check either "Applies to all transitions." or "Applies to all photos." - See below for why.
-> I discovered, as you have, that all the photos have to go in before I add any transitions. This was new to me. With all previous versions of iMovie I simply added a photo then a transition then another photo one at a time. I had to fiddle with the timing adjustments, but at least I could fiddle. With this new version of iMovie I can't. Once the transition is in place, I cannot change the duration of the photo.
-> Sometimes, I want a longer or shorter duration for a photo. For example, on photos to which I apply the Ken Burns effect, I often want the image on the screen for a slightly longer time. In this case, I have to use the inspector to change the duration before I add the transitions. So I might set the time for 8 seconds; when both transitions are added, the time for this photo becomes 6 seconds, which is what I want.
-> The same applies if I want a transition to be shorter or longer than 2 seconds. If, for example, I want the duration for a transition to be 1 second, then I have to change the duration on the two linked photos to 5 1/2 seconds.
All of this requires much more prior planning than I am used to with iMovie. Right now, I working with batches of 5 or 6 photos at a time. I don't put a transition on the last photo in the batch until I have added the next group of photos. And things get really tricky if I don't like my original design. If I want to change anything, I have to take out all of the transitions linking the photos I want to work on, do the math, make the changes in the photo durations, then put the transitions back.
Perhaps I am trying to make iMovie do more than it was intended to do, I don't know. Perhaps this problem stems from the fact that I bought just iMovie 11 from the Mac Apps Store and not the entire iLife 11. Don't know that either. But at least I have found a way to make the movie look the way I want it to look.
Thanks for sharing your process. I will use it when the circumstances are right.

PHOTO BOOTH problem with disapearing photos

Hi,
Im having problems with photo booth... why isnt there a photo booth discussion board?
Anyway.. my photos seem to disappear from the menu at the bottom after a period of time.
When i go into the photo booth folder to find the photos, i find that they have an annoying black border around them.
YUCK!
whats going on?
thanks

Yes. It just clears out your current preferences for that application ...it does not delete your pictures or any work you've saved while using that application.
Usually if an application is acting up you can safely delete its preference file from your Library (your User Library that is) - this returns the app. to its 'first run' state - although as I said, your documents/saved files are untouched.
Here's a link on the subject...
http://www.macfixit.com/article.php?story=20060314080135452

New Xperia Z1 wifi problem 14.4.A.0.108 (Multiple access points)

Hi,
I recently got a replacement Xperia Z1. This phone was immediately updated to the latest firmware (ending with 108) so I do not know if this problem existed prior to the update.
My problem is that the phone thinks it's still coneected to a wireless network even when it's not which prevents the phone from reconnecting when in range of a new network.
When it's working it looks like this: (same signal strenght in both the top bar and the settings)
When it's not working it looks like this (sifferent signal strenghts when compring the settings and the top bar)
And I'm 15km away from my home network
To make it work again I only have to turn off wifi and then turn it on again.
This screen shows for about 10 seconds when the problem has occured (instead of usually 1-2 seconds)
I've already tried to reset and reinstall the firmware. Is this an hardware error or has this something to do with the latest update?
//Mikael

An Update:
I've found that this problem only occurs on networks with multiple Access Points and when the phone is switching from on AP to another.
If the problem occurs the network stays "connected" even though I leave the area as described in my first post.
Does this help?
I've tested on several networks.

Downloaded IOS 8.0.2 yesterday and the iCloud is still downloading, I am also unable to access my Facebook account, the problem is definitely on my iPad because I can access Facebook on my android phone....soooo frustrating I don't even want iCloud

Downloaded IOS 8 yesterday and iCloud Drivetime is still downloading...I am also unable to access my FACEBOOK page, I can access my FB page on my Andriod phone so obviously problem is with Apple....don't even want iCloud!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service" Never had problems before how can it be fixed

When trying to convert PDF to Word I get message "An Error occurred while trying to access this Service" Never had problems before how can it be fixed??

It appears that you have a subscription to one of Adobe's online subscription sersvices.
Here, you have a user-2-user forum for users of the free desktop PDF viewer Adobe Reader.
Some resources for following up with question about Adobe online services.
To contact support for acrobat.com subscription services:
https://www.acrobat.com/misc/en/contact-support.html
Other links to support:
http://helpx.adobe.com/contact.html
http://helpx.adobe.com/support.html
contact Adobe Customer Care on Twitter @AdobeCare.
Phone support (for a fee - have credit card ready)
800-833-6687, Mon - Fri, 5AM - 7PM PT
Be well...

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Samsun Gusto 3 Unable to access My Verizon- Error, Network Problem, Network Unavailable

I have a new Samsung Gusto 3.
When I click on Settings- My Verizon, I get an error - Unable to access My Verizon- Error, Network Problem, Network Unavailable. My wife has a similar phone and hers works just fine.
I have had the phone now for about two weeks and the problem is still there.
John

I do not know what ‘data blocks’ are. This phone is brand new – now only two weeks old. I brought it to replace an older phone. That older phone had no problem accessing ‘My Verizon’ – so when I did a simple ‘replace’ of my old phone with the new one – everything should continue to work as before. BUT it does not access My Verizon.
That is all I know. When I bought the new phone, I just followed the prompts to transfer my account to the new one.
My plan is Basic pay as you go.
John

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

I upgraded to 10.10.1 today and the brightness dimmed on my mac monitor - I've checked both display and accessability and dont see a problem. My second monitor which is not a mac monitor is bright still.

Try resetting the PRAM and SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Remote Access VPN, no split tunneling, internet access. NAT translation problem

Hi everyone, I'm new to the forum. I have a Cisco ASA 5505 with a confusing (to me) NAT issue.
Single external IP address (outside interface) with multiple static object NAT translations to allow port forwarding to various internal devices. The configuration has been working without issues for the last couple years.
I recently configured a remote access VPN without split tunneling and access to the internet and noticed yesterday that my port forwarding had stopped working.
I reviewed the new NAT rules for the VPN and found the culprit.
I have been reviewing the rules over and over and from everything I can think of, and interpret, I'm not sure how this rule is affecting the port forwarding on the device or how to correct it.
Here are the NAT rules I have in place: (The "inactive" rule is the culprit. As soon as I enable this rule, the port forwarding hits a wall)
nat (inside,outside) source static any any destination static VPN_Subnet VPN_Subnet no-proxy-arp route-lookup
nat (outside,outside) source static VPN_Subnet VPN_Subnet destination static VPN_Subnet VPN_Subnet no-proxy-arp route-lookup
nat (outside,outside) source dynamic VPN_Subnet interface inactive
object network obj_any
nat (inside,outside) dynamic interface
object network XXX_HTTP
nat (inside,outside) static interface service tcp www www
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
Any help would be appreciated.

Try by changing the nat rule to nat (outside,outside) after-auto source dynamic VPN_Subnet interface
With Regards,
Safwan

A problem with Win 7 Pro, Outlook Web Access based on Exchange Server 2003, and two different domains

Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar Modukuru

I would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Access Connection - Prefer MAC address problem

Hey
My specifications:
Windows Vista
Access Connection v5.31
After updating access connection I'm not able to prefer MAC addresses for my profiles anymore.
Edit profile> Wireless settings> Advanced configuration (settings)>
Preferred access point MAC address.-
This box is grayed out and you're not able to write in the box anymore.
Am I doing something wrong or is this feature just disabled for this version?
Also I remember having seen an old version being able to prefer 5 MAC addresses for one profile
Thank you!
/ jerian

Welcome to the Apple discussions.
Is the mac address you're using the one you see when you click on the blue apple, about this mac, more info, network, and scroll down to the mac address? Is it possible there's a mixup between the letter O and zero when entering the mac address?

Problems accessing imovie in photo booth, Problems accessing imovie in photo booth

Similar Messages

Maybe you are looking for