Problems accessing iWeb

I am using iWeb on my home computer and I would like to have access to the website at work. My work computer is an eMac which uses OS 10.4.11. I tried to copy the domain file to iDisk and I've tried to copy the domain file to a flashdrive so that I can open it on my work computer. But the domain file isn't copying to the iDisk (from my home computer) nor is it readable from my flashdrive. I've written an email for Apple Support, but so far I've heard nothing and it's been almost a week.
Help!
Catherine

I beleive that I read somewhere on Cédric FAQ's possibly that one must also change the access permission on the computer where the original file was created to be able to access it and change it on another computer as the account is tied to the account on the computer. Open the file info and change it there all users read and write then copy the file and move it to another computer.
Good luck
Mireille

Similar Messages

  • Unable to access iweb or idisk

    There seems to be a problem accessing iWeb pages as well as my iDisk. I don't think i am the only one experiencing this problem. Anyone else having problems?

    There seem to have been some issues today, I have been uploading throughout the day with different speeds.
    Sometimes it has checked the whole site, and other times just the edited pages, which is the option I like!
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Can't Publish Site, Can't Access iWeb

    I am so far beyond frustrated it's hard to think straight. I have been having nothing but problems with iWeb for weeks, and I can't find any answers or help. Ever since I got the notice that .Mac Homepage is going to be retired, I have been trying to update the 1400+ Homepage pages on my site to iWeb so I can make changes as needed to the pages in the future. I have a music review and interview site (I don't sell anything), and I need to update as many of these pages as I can before July 7. In the past two weeks, I've been able to update only a few pages because iWeb freezes, disappears, drops the updates, or the little ball just keeps turning. I have worked so hard to make MainlyPiano.com a top-notch site, and since I upgraded to iWeb '09, it has been nothing but heartache. Instead of writing new reviews, I'm spending all of my time trying to get this program to work for me again, and it just keeps doing everything except what I want it to do. Apple Support indicates that there is nothing wrong with the program. Why then are so many of us having so many problems getting it to work properly, and why does it work properly for a little while and then crash? iWeb was working fine on my iMac for a long time, and now I can't bring the site up on that computer at all!
    I updated a couple of pages this evening, and they published in record time. I went to update another page and the program froze, so I quit iWeb. Then I couldn't get iWeb to open to the site, so I rebooted. The two pages I updated are now online, but I can't access them in the iWeb program. How can that be? This is like an ongoing nightmare and I don't know what to do to fix it. Can someone please give me an idea of where to go for some answers????
    Kathy

    I know this, but I need access to most of my pages so I can update them as necessary. The biggest problem is that most of my updates either don't publish or iWeb freezes while I'm working with it or my new pages disappear like they did last night. They are online, but they aren't on the iWeb application so I can't access them. I just quit and reopened iWeb to see if they came up, but they did not. I saved them both before I published, so I don't understand this at all. I still can't get the site to come up at all in my iMac. My forehead is getting very bruised from banging my head against the wall!

  • Problem accessing /config_general/null/Default.action   Reason:There is no Action mapped for namespace/ config_general and action name default

    in use:
    vRO 5.1
    eclipse 3.7.2
    vRo plug-sdk 5.1
    steps:
    1.create a plug-in project from samples(choose solar system)
    2.find the dar package and upload it by vRo configuration
    3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
    problem:
    Problem accessing /config_general/null/Default.action   Reason:There is no Action mapped for namespace/ config_general and action name default
    How to solve it??
    Thanks so much!!

    There was problem from crm side...its working now..

  • I have more problems in iWeb than I can begin to describe.  For one, after an "unexpected shutdown" of iWeb, it just deleted 10 of my published pages.

    I published the updates to my site last night.  Today I have had to make some adjustments.  I saved iWeb before I left for lunch just in case.  After lunch, I made more changes and through an issue with a photo album, iWeb "unexpectedly quit".  When I went to Revert to Saved..., it did revert to saved, which I didn't realize until then that somehow iWeb had deleted 10 pages before I saved it.  So now I have lost 10 pages. 
    Every time I open iWeb, it tells me it no longer has the links to documents or any of the pictures.  Every time I work on iWeb, I have to reattached all the documents and re upload all the pictures all over my site.
    I could write for hours about the problems with iWeb.  Certainly I am doing something wrong ... but my IT company has no idea what is wrong or how to fix it.
    I have iWeb version 3.0.4 (601)

    First replace your domain file that's in the Users/Home/Library/Application Support/iWeb folder with a backup copy that was made before this happened.
    If you don't have a backup copy try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

    Hi
    I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
    Is anyone able to help?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • Problems accessing Music Files in Slideshow module in LR 2.6 and Windows 7 64 bit

         Just got new computer 64 bit Windows 7.  Installed LR 2.6 and am having problem with slideshow and music.  Never had this problem before with my XP computer.  When I open up slideshow module and go to Playback window and check soundtrack and try to choose a music folder, I have a new problem.  It opens up "Browse for Files & Folders" dialog box as usual, but it only lets me browse on my desktop or my User name on the C drive.  My music is in my F drive where my data is stored.  I've never had a problem accessing my music in my F drive in my XP computer, but this setup limits where I can browse to.  Interesetingly, this works OK in LR 3 beta on this WIndows 7 PC where it opens up a dialog box "Choose a music file to play" which gives me access to all my drives.  In summary, I can't access music files stored on a drive other than my C drive using LR 2.6 on a Windows 7 64 bit computer.
         I have attached a screen shot to compare the new Windows 7 Browse for Files & Folders dialog box to that in my XP computer.
         Would appreciate any suggestions.
    Thanks,
    Matthew Kraus

    Thanks for the reply.  I went through the process you suggested to change Ownership  & grant permission to access files.  When I get to the owner tab in Advanced Security Settings....I am already the current owner of this folder.
    What do I do now?
    Thanks,
    Matthew Kraus

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Problems accessing Time Capsule on windows Vista

    I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
    both machines have the latest version of Airport Utility and Bonjour.
    The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
    Any help appreciated.

    No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

  • Problem accessing adobe camera raw in Bridge for CS6

    I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature."  My software is registered with Adobe. Any solutions?feature."  My software is registered with Adobe. Any solutions?

    Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
    Mylenium

  • Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

    Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

    Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
    tt2

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • Exchange setup error: "There was a problem accessing the registry on this computer"

     Hi,
    i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
    During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
    Error:
    There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
    Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
    I dont know what more to do, any help will be appreciated.
    Thanks

    No, firewall is disabled.
    Setup Logs says:
    10:50:04.890: Starting Collecting Data phase.
    10:50:04.921: No mapping between account names and security IDs was done
    10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
    10:50:06.093: Completed Collecting Data phase.
    10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
    10:50:06.171: Starting Postprocessing Rules phase.
    10:50:06.187: Completed Postprocessing Rules phase.
    Thanks for your help!

  • Problem accessing R/3 with SSO ticket from the EP6.0

    Hi all,
    I have seen this thread: Problem accessing R/3 with SSO ticket from the EP6.0
    I know that it is possible to read SSO ticket from the Cookie in WebDynpro application.
    Now we are at the first step, we don't know how to read SSO ticket from the Cookie in WebDynpro application with java code.
    So anyone can help us?

    Hi,
    This has been discussed in a previous forum.Check this link.A code snippet is also there to read a cookie in webdynpro with this question
    How to implement SSO between Portal, Webdypro and ABAP system?
    I am not able to send the link exactly.
    Regards,
    Sowjanya.
    Message was edited by: Sowjanya Chintala

  • Problem accessing another public ip in same subnet

    Hi,
    I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
    I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
    The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
    How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
    I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
    Any help with this issue is much appreciated.

    The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
    Once again thank you for your time.
    : Saved
    ASA Version 8.2(1)
    hostname ciscoasa
    domain-name XXXXXXX
    enable password XXXXXXX encrypted
    passwd XXXXXXX encrypted
    names
    name 8.8.8.8 Outside_IP
    name 192.168.20.2 Server
    name 192.168.20.11 rav-dc01
    name 192.168.20.12 rav-ms01
    name 192.168.20.13 rav-rds01
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.20.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address Outside_IP 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    boot system disk0:/asa821-k8.bin
    ftp mode passive
    dns server-group DefaultDNS
    domain-name XXXXXXX
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
    access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
    access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
    access-list outside_access_in extended permit tcp any interface outside eq smtp
    access-list outside_access_in extended permit udp any interface outside eq 4125
    access-list outside_access_in extended permit tcp any interface outside eq 4125
    access-list outside_access_in extended permit tcp any interface outside eq https
    access-list outside_access_in extended permit tcp any interface outside eq pptp
    access-list outside_access_in extended permit tcp any interface outside eq 444
    access-list outside_access_in extended permit gre any interface outside
    access-list outside_access_in extended permit udp any interface outside eq 444
    access-list outside_access_in extended permit tcp any interface outside eq www
    access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
    access-list inside_access_in extended deny tcp any any eq smtp
    access-list inside_access_in extended permit ip any any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-621.bin
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
    static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
    static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255  dns
    static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
    static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255  dns
    static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
    static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
    static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
    static (inside,outside) tcp interface www Server www netmask 255.255.255.255  dns
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server rav_Intern protocol radius
    aaa-server rav_Intern (inside) host rav-dc01
    key CiscoAsa5505RAV2012
    radius-common-pw CiscoAsa5505RAV2012
    http server enable 8080
    http 192.168.20.0 255.255.255.0 inside
    http 192.168.25.0 255.255.255.0 inside
    http 100.100.101.128 255.255.255.192 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    sysopt connection timewait
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map outside_dyn_map 20 set pfs
    crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    telnet 192.168.20.0 255.255.255.0 inside
    telnet timeout 5
    ssh 192.168.20.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    management-access inside
    dhcpd auto_config outside
    dhcpd address 192.168.20.190-192.168.20.200 inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ntp server rav-dc01 source inside
    webvpn
    group-policy RemoteVPN internal
    group-policy RemoteVPN attributes
    wins-server value 192.168.20.11
    dns-server value 192.168.20.11
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value RemoteVPNSplittunnel
    default-domain value rav.nu
    split-dns value rav.nu
    username SupportVPN password XXXXXXX encrypted privilege 0
    username SupportVPN attributes
    vpn-group-policy RemoteVPN
    tunnel-group RemoteVPN type remote-access
    tunnel-group RemoteVPN general-attributes
    address-pool RemoteVPNPool
    authentication-server-group rav_Intern
    accounting-server-group rav_Intern
    default-group-policy RemoteVPN
    tunnel-group RemoteVPN ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map global_policy
    class inspection_default
      inspect pptp
      inspect icmp
      inspect icmp error
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
    : end
    asdm image disk0:/asdm-621.bin
    no asdm history enable

Maybe you are looking for