Problems accessing my DMZ on LAN

Hi,
I am running Solaris 10 (x86) and have decided to setup a zone as a website. I have apache2 running successfully and can access the test page over my LAN. However i am unable to access the same page from the WWW through my ADSL Trust 445A router / firewall.
I am setup using DHCP on the router, but to always find my domainname i have aligned myself with 'www.dyndns.com' and have my own domainname assigned to my PC.
Now when I attempt to connect to my x86 zone all I can actually see is my web page of my router after it asks me for my login & password.
I have attempted to open port 80 and point it to the IP address of my x86 zone but this isn't working, I just get the same as above. I have also opened DMZ on the firewall to the x86 zone ip address but this also gives me the same result.
Can anyone offer any advise / configuration on this type of firewall / router. Do I need to type something in the webaddress <URL> to connect me through to my x86 zone website once I have bypassed my router?
Please advise.........
tpx00

I cannot retrieve my text messages on my laptop at the
Verizon website using the integrated messaging feature. I have been using this feature for several
months but it now has stopped. Usually I Move the cursor over “My Verizon”.
Then I move cursor over “My Messaging” and Click on “My Messaging Overview”. This
takes me to another page with a header that says “My Messaging”. There is a
button to click on the page that reads “Go to Web App”.
This then, usually takes me to my text messages where I can
read them and even observe as new messages stream live.
This worked until Wednesday 11-26-2014, but suddenly
stopped. Now clicking the “Go to Web
App” takes me to a page that says “Send a text”. There is also a link that reads “Get
Started”. When I click on it, it does not work. I have been using IE 11. I cleared cookies. I tried Mozilla Firefox browser. None of these solved the problem. The integrated messenger feature worked until Wednesday, November 26 2014.

Similar Messages

Exchange setup error: "There was a problem accessing the registry on this computer"

Hi,
i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
Error:
There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
I dont know what more to do, any help will be appreciated.
Thanks

No, firewall is disabled.
Setup Logs says:
10:50:04.890: Starting Collecting Data phase.
10:50:04.921: No mapping between account names and security IDs was done
10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
10:50:06.093: Completed Collecting Data phase.
10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
10:50:06.171: Starting Postprocessing Rules phase.
10:50:06.187: Completed Postprocessing Rules phase.
Thanks for your help!

Having problem accessing MacMini over network with PC's Windows 7

Hi all,
I have a Mac Mini with 10.6.x
Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
I came across as i was searching for this issue and it seems that authentication - Golden triangle or whatever is called - might be the issue in the whole mess. Do you guys think that this might be the case ?
The only way i have found out to help is to restart the Router and Server and that usually fix the problem .
Could you please help me figure what is going on there?
Here is the original thread: https://discussions.apple.com/thread/3867559?tstart=0 ( i think i posted in the wrong forum )

The specified changeip -checkhostname command does not make changes to your configuration.
To research the command (and that's entirely your perogative), please use Google or Bing to search for previous discussions and details, or review the provided man page documentation for the command. (Launch Terminal.app (folder Applications > Utilities) and issue the command man changeip. You'll see something like this:
$ man changeip
changeip(8)               BSD System Manager's Manual              changeip(8)
NAME
     changeip -- Change service configuration files with hard-coded IP addresses
SYNOPSIS
     changeip [-v] [-d path] old-ip new-ip [old-hostname new-hostname]
     changeip -checkhostname
     changeip -h
DESCRIPTION
     changeip is used to manually update configuration records when a server's IP address or hostname changed in a way that affected services were unable to properly process, for example when the server is behind a NAT device and the WAN identity changed. ...
Given your response and your concern, consider creating a backup of your disk. Shut down, boot the installation DVD, and use Disk Utility (from the Utilities menu) in the second screen of the installation process to copy your disk contents to an external storage device. (Time Machine isn't as good at getting a backup of a server as is a clean backup created while shut down.) There are descriptions around that detail how to create this backup using Disk Utility.
There is no DNS server implemented in the Airport Extreme. The Airport Extreme forwards DNS requests to a DNS server elsewhere. Few gateway devices contain DNS servers; that these devices request a DNS address tends to be confusing, too. That address is solicited from the user for use in the DHCP server that many of the available gateway devices provide.
There is no need for a DNS forwarder, particularly if your server is configured for your LAN. (Adding a forwarder adds another hop into the whole translation process. That configuration and that extra hop can be useful when the intermediate DNS server is providing specific, enhanced DNS-related functions, such as security monitoring and logging, or providing a "nanny filter" mechanism.)
If you are running DNS services on your LAN, then your Airport Extreme DHCP server should be configured to pass out the IP address of your DNS server.
It would appear that your local box has the default self-hosted DNS, and is not configured to serve LAN DNS (other than for itself). That's good. Accordingly, it'll likely be getting good DNS from itself, but will not be getting translations for other hosts on your network. That's not so good. When DNS responses are not available, you'll get DNS-level timeouts, and those are usually around 30 seconds each.
Check your server logs for messages related to the failed connections, and check the Windows file service logs for any errors being generated by the file service. The log information is most easily available from Console.app, which is a utility in Applications > Utilities folder, or from the Server Admin tool (Applications > Server folder) for DNS, and for the file server component.
The above is probably going to read like a wall of unfamiliar jargon, so please ignore this and my previous response here, and I'll leave it to somebody else to assist you here.

Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default

in use:
vRO 5.1
eclipse 3.7.2
vRo plug-sdk 5.1
steps:
1.create a plug-in project from samples(choose solar system)
2.find the dar package and upload it by vRo configuration
3.vRo configuration said upload successfully,but the solar system configuration is not properly configued..
problem:
Problem accessing /config_general/null/Default.action Reason:There is no Action mapped for namespace/ config_general and action name default
How to solve it??
Thanks so much!!

There was problem from crm side...its working now..

Can ASA5505 forward remote-access-VPN clients to LAN

I currently have ASA-5505 and 2911-Router and I'm trying to configure VPN topology.
Can ASA5505 forward remote-access-VPN clients to LAN operated by a different router?
Are these two cases possible?:
(1) ASA-5505 and 2911-Router are on separate WAN interfaces, each directly connected to ISP. But then can I connect one of other LAN interfaces of ASA-5505 into a switch managed by 2911-Router to inject remote-SSL-VPN clients into the LAN managed by the router?
(2) ASA-5505 is behind 2911-Router. Can 2911 Router assign a public ip address or have public ip address VPN-access attempts directly be forwarded to ASA-5505 when there is only one public ip address available?
Long put short, can ASA-5505 inject its remote-access-VPN clients as one of hosts on the LAN managed by 2911-router?
Thanks.

I could help you more if you can explain the purpose of this setup and the connectivity between the ASA and router.
You can enable reverse-route on the Dynamic map on the ASA. The ASA will install a static route for the client on the routing table. You can use a Routing protocol to redistribute the static routes to your switch on the LAN side of the ASA.

Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

Hi
I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
Is anyone able to help?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Problems accessing Music Files in Slideshow module in LR 2.6 and Windows 7 64 bit

     Just got new computer 64 bit Windows 7. Installed LR 2.6 and am having problem with slideshow and music. Never had this problem before with my XP computer. When I open up slideshow module and go to Playback window and check soundtrack and try to choose a music folder, I have a new problem. It opens up "Browse for Files & Folders" dialog box as usual, but it only lets me browse on my desktop or my User name on the C drive. My music is in my F drive where my data is stored. I've never had a problem accessing my music in my F drive in my XP computer, but this setup limits where I can browse to. Interesetingly, this works OK in LR 3 beta on this WIndows 7 PC where it opens up a dialog box "Choose a music file to play" which gives me access to all my drives. In summary, I can't access music files stored on a drive other than my C drive using LR 2.6 on a Windows 7 64 bit computer.
     I have attached a screen shot to compare the new Windows 7 Browse for Files & Folders dialog box to that in my XP computer.
     Would appreciate any suggestions.
Thanks,
Matthew Kraus

Thanks for the reply. I went through the process you suggested to change Ownership & grant permission to access files. When I get to the owner tab in Advanced Security Settings....I am already the current owner of this folder.
What do I do now?
Thanks,
Matthew Kraus

Problems accessing Time Capsule on windows Vista

I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
both machines have the latest version of Airport Utility and Bonjour.
The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
Any help appreciated.

No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

Problem accessing adobe camera raw in Bridge for CS6

I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature." My software is registered with Adobe. Any solutions?feature." My software is registered with Adobe. Any solutions?

Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
Mylenium

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2

Problem accessing R/3 with SSO ticket from the EP6.0

Hi all,
I have seen this thread: Problem accessing R/3 with SSO ticket from the EP6.0
I know that it is possible to read SSO ticket from the Cookie in WebDynpro application.
Now we are at the first step, we don't know how to read SSO ticket from the Cookie in WebDynpro application with java code.
So anyone can help us?

Hi,
This has been discussed in a previous forum.Check this link.A code snippet is also there to read a cookie in webdynpro with this question
How to implement SSO between Portal, Webdypro and ABAP system?
I am not able to send the link exactly.
Regards,
Sowjanya.
Message was edited by: Sowjanya Chintala

Problem accessing another public ip in same subnet

Hi,
I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
Any help with this issue is much appreciated.

The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
Once again thank you for your time.
: Saved
ASA Version 8.2(1)
hostname ciscoasa
domain-name XXXXXXX
enable password XXXXXXX encrypted
passwd XXXXXXX encrypted
names
name 8.8.8.8 Outside_IP
name 192.168.20.2 Server
name 192.168.20.11 rav-dc01
name 192.168.20.12 rav-ms01
name 192.168.20.13 rav-rds01
interface Vlan1
nameif inside
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Outside_IP 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa821-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name XXXXXXX
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit udp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq https
access-list outside_access_in extended permit tcp any interface outside eq pptp
access-list outside_access_in extended permit tcp any interface outside eq 444
access-list outside_access_in extended permit gre any interface outside
access-list outside_access_in extended permit udp any interface outside eq 444
access-list outside_access_in extended permit tcp any interface outside eq www
access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
access-list inside_access_in extended deny tcp any any eq smtp
access-list inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255 dns
static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255 dns
static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server rav_Intern protocol radius
aaa-server rav_Intern (inside) host rav-dc01
key CiscoAsa5505RAV2012
radius-common-pw CiscoAsa5505RAV2012
http server enable 8080
http 192.168.20.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 100.100.101.128 255.255.255.192 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet 192.168.20.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.20.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
dhcpd address 192.168.20.190-192.168.20.200 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server rav-dc01 source inside
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.20.11
dns-server value 192.168.20.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteVPNSplittunnel
default-domain value rav.nu
split-dns value rav.nu
username SupportVPN password XXXXXXX encrypted privilege 0
username SupportVPN attributes
vpn-group-policy RemoteVPN
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool RemoteVPNPool
authentication-server-group rav_Intern
accounting-server-group rav_Intern
default-group-policy RemoteVPN
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
: end
asdm image disk0:/asdm-621.bin
no asdm history enable

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

Equium A100-027 PSAAQ - having problems accessing Internet with WLan

Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.

Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets

Problem accessing Tomcat !

Hi,
I am trying to access Tomcat from a network outside my LAN. It works fine within my LAN but doesn't work outside it. When I type ipconfig on my server machine, i get the following lines
Connection-specific DNS Suffix . : wiu.edu
IP Address. . . . . . . . . . . . : 207.246.188.244
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 207.246.188.1
I use the IP address shown above to access my Tomcat server.
Can anyone tell me where I am going wrong or what should i do to access Tomcat outside my LAN ????
Thanks !!!!

if you are using moizilla/netscape try the following
go to Edit>Preferences>Advanced>Proxies in the browser of the client comp. add the ip in 207.246.188.244 in "No proxy for" column
if you are using a windows system
in internet explorer
seletc tools>connections >advanced connections and add the ip there

Problems accessing my DMZ on LAN

Similar Messages

Maybe you are looking for