Problems accessing Version sets in Organiser

I have upgraded by download from PE10 to PE13. In the organiser my photos have a version set thumbnail in top right but no expand button or function via the edit menu which is greyed out. How do I get the version set to expand?

Hi,
You need to switch the grid view to the old classic style by using Ctrl (Cmd) + D or go to the View menu and check Details.
You should then see the version set open/close icons next to the thumbnail.
Brian

Similar Messages

Problems using version set in Elements 9

Hi!
I have problems using the version set. When saving files in the Element 9 editor I can not mark the "version set" option, its not highlighted and not possible to mark or use. Is there a basic setting that I´m missing or??? I have the MAC version of Elements.
Also I have noticed that when I have edited a file in the Elements 9 editor and I come back to the Organizer the editor have changed the time of the photo? This means that its rather difficult to find the photo in the Organiser. It often change the time 1 or 2 hours.
As I cant use the version set I can not keep my tags on the edited pictures. Is there a setting for keeping the tags and catalogue belongings to a edited file?
As of today this software makes no sense to me and I can basically not keep working with it as it does not support basic functionality that I´m dependent on.
Best Re
A

I’m not seeing this in my own version sets in PSE9; when I expand the set every image has the same date and time under each thumbnail.
I’m wondering if you have used the “save for web” command at some point, which
wipes all EXIF metadata, including the date & time of the original - in order to optimize the image for display on the internet. So if you have imported such an image Elements has to make an estimate. Apart from this known scenario I can’t really explain what’s going on.

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

Hi
I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
Is anyone able to help?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Can you please help solve my sudden problem saving photos in version sets?

Saving edited photos in Version Set
Ever since I have owned the excellent Adobe Photoshop Elements 4.0, I have saved edited photos in a version set with the original. Now, in spite of the 'save in Version Set' box being ticked, they are saved separately. When the edited photo is saved, it says 'imported from hard disk'. It has never said this before.
When the photos are imported from the camera, they are saved in Adobe/Digital Camera Photos/code provided by photoshop (eg 2006-03-10-1632-38). Under properties/history it says imported from Panasonic DMZ-TZ3. This has not changed. All the saving arrangements appear to be unchanged.
Photos (thousands!) have been successfully edited and saved in a Version Set. Under properties/history it says 'edited version' and 'imported from Panasonic DMZ-TZ3'.
Suddenly, photos that have been edited and should have been saved in a version set, now say under properties/history nothing about being edited. They say 'imported from hard disk'. In other words they are being treated as a new photo.
I really hope you can help me to solve this infuriating problem. Please ask if you need more information.
I work on a PC with Windows XP
Michael

Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions. Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

Version set problem

I have been using version seta for years,but now when I try to save an edited picture in a version set the organizer throws it away. Anybody else have this problem?

My catalog is roughly 12,000. The view I use shows the version set and the file information, i.e. Nef, Jpeg details.
Tim

Elements 11 problem with Saving to Version Set

I have upgraded toElements 11 but when i go to save a file to " save in version set with original" it will not let me, as the tick box is blanked out?

It maybe a question of permissions. Are you running from an administrators account or a user account? If the latter do you have full read/write permissions for the application? What operating system do you have ?
On Windows try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 32 bit systems navigate to Program Files
Right click on each of the new desktop icons and launch by choosing “Run As Administrator”
Keep both applications running but try to edit and save a photo as before.

Problems saving in Version sets

After editing raw images, I try to save the edited image as a jpeg file in a version set with the original raw image.
However what I get is the edited jpeg and the edited raw...wiuth the original uneditted raw file being lost.
Anyone got any suggestions?

OK, I understand now. I do use the open image button, and then select "save in version set with original". When I open the version set, the 2 images are the jpeg and the raw of the edited file.
I do not see the original raw.
BTW, this has only started to be an issue. Previous edits even with PSE11 have contained the original file. I dont know if I could have inadvertently made a change to the settings.
I appreciate your suggestions.

Version sets in Elements 12

I have just upgraded from 8. I can load my Raw file ok (.NEF) into the raw converter and make adjustments as necessary. However, when I open the image and then save as, although the version sets option is ticked, it does not appear back in the organiser. The file is on the hard disk ok, but does not seem to be accessable from the orhganiser. I've seen some other people are having similar issues with version sets in elements 12 but I can't see what the soluton is.

Thanks for this advice. I killed ElementsAutoanalyzer.exe as described and this has partially solved the problem. Now when I open the image from the raw converter, and then immediately Save As, I get the options for save to organiser and include in version set ticked, the file is saved but doesn't appear in the organiser. If I then Save a second time (the option Save As is disabled), I get only the option to include it in the organiser (the include in version set option is disabled). This time, after checking ok to overwrite the existing file, it is included in the organiser next to the original file. Further editing of this file does save to a version set, so you end up with the original file and then a version set of all the edits. This is ok, although not ideal as it wastes space in the organiser.

Problems accessing Time Capsule on windows Vista

I have an iMac running Leopard and a laptop running Vista Home Edition. I'm having some problems accessing Time Capsule from the Vista machine. everytime I click to access the drive, a message appears in the menu bar of the window that says (not responding). I've tried leaving it. I've even changed my entire wireless network to bypass the original g router (belkin) to use TC, so I now have TC as my router, Belkin just setup as a wired broadband modem but I still get the same problem. The mac seems fine, although I have had quite a few issues with drop outs.
both machines have the latest version of Airport Utility and Bonjour.
The laptop is a recent purchase to replace a dead XP machine, this worked fine and I managed to get stuff backed up just before it died, thankgod.
Any help appreciated.

No problem seeing Time Capsule with iMac, Dell desktop XP Home, Dell notebook XP Pro, and Fusion with XP Pro. All installed according to the installation guide. Installed AirPort Utility on all machines and updated firmware to 7.3.1. To see the other machines, make sure file sharing is on. Firewall on the PCs may need to be turned off. The printer plugged into the USB port also worked with all the XP systems and the iMac with a few missing features on iMac (I am assuming different driver issues). BTW, logging onto the created network and accessing the Time Capsule HD are separate. If you've entered different passwords for the HD and wireless networking when setting up Time Capsule initially (which I did through the iMac first), you'll need to enter them separately with the XP machines. You could also try resetting Time Capsule. Seems to work for others.

Problem accessing another public ip in same subnet

Hi,
I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
Any help with this issue is much appreciated.

The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
Once again thank you for your time.
: Saved
ASA Version 8.2(1)
hostname ciscoasa
domain-name XXXXXXX
enable password XXXXXXX encrypted
passwd XXXXXXX encrypted
names
name 8.8.8.8 Outside_IP
name 192.168.20.2 Server
name 192.168.20.11 rav-dc01
name 192.168.20.12 rav-ms01
name 192.168.20.13 rav-rds01
interface Vlan1
nameif inside
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Outside_IP 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa821-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name XXXXXXX
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit udp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq https
access-list outside_access_in extended permit tcp any interface outside eq pptp
access-list outside_access_in extended permit tcp any interface outside eq 444
access-list outside_access_in extended permit gre any interface outside
access-list outside_access_in extended permit udp any interface outside eq 444
access-list outside_access_in extended permit tcp any interface outside eq www
access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
access-list inside_access_in extended deny tcp any any eq smtp
access-list inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255 dns
static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255 dns
static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server rav_Intern protocol radius
aaa-server rav_Intern (inside) host rav-dc01
key CiscoAsa5505RAV2012
radius-common-pw CiscoAsa5505RAV2012
http server enable 8080
http 192.168.20.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 100.100.101.128 255.255.255.192 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet 192.168.20.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.20.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
dhcpd address 192.168.20.190-192.168.20.200 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server rav-dc01 source inside
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.20.11
dns-server value 192.168.20.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteVPNSplittunnel
default-domain value rav.nu
split-dns value rav.nu
username SupportVPN password XXXXXXX encrypted privilege 0
username SupportVPN attributes
vpn-group-policy RemoteVPN
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool RemoteVPNPool
authentication-server-group rav_Intern
accounting-server-group rav_Intern
default-group-policy RemoteVPN
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
: end
asdm image disk0:/asdm-621.bin
no asdm history enable

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

Version set option greyed out

I use PSE 8 to organise and edit my photos. Today I edited a photo and when given the option to save the new version, the option to save as a version set with the original was greyed out and unavailable. Any idea what is going on here since I normally tick this box?

If only it was that simple. The version set option is still greyed out when using "Save As". Experimenting further, I have discovered the greying out does not occur for all files I try to edit. The problem I am exoeriencing seems to be with some jpg files taken on an iPhone and emailed to me. There doesn't seem to be a problem with jpg files downloaded from my Ricoh Caplio camera. Could there be a setting in the picture meta data that interferes with how PSE handles the file?

PSE 4 (WinXP): Version set not working

I have about 7000 thumbnails in my catalogue. Just recently I have had a problem when creating a version set - I get something like a catalog error (sorry, I didn't write it down when it happened - I think it's a DBA error?) and the original thumbnail is displayed only in the Organiser, without a version set icon in the corner. The new jpeg is still saved, it just doesn't show in the version set, or the catalogue at all. Furthermore, when I 'get' new photos from the folder I saved the jpeg in, I get an ODBC error - again, apologies that I can't transcribe it: I checked the 'don't want to see any more' box pretty quickly. So the new jpeg I created is somehow both in and 'not in' the catalogue.
Help is appreciated.

Thanks! I might not have found that feature for years. Or might have found it previously, and forgotten it was there . That allowed me to import the new thumbnails to the catalogue, but not repair the version set.

Problems accessing Version sets in Organiser

Similar Messages

Maybe you are looking for